+#
+# Copyright (C) 2006-2008 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
# $Id$
include $(TOPDIR)/rules.mk
-include $(TOPDIR)/include/kernel.mk
+include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=madwifi
-PKG_VERSION:=0.9.0
-PKG_RELEASE:=1
-PKG_MD5SUM:=9b558d1df84cab2b0006c595feee0fba
-PKG_SOURCE_URL:=@SF/$(PKG_NAME)
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
-PKG_CAT:=bzcat
+ifneq ($(CONFIG_MADWIFI_UPSTREAM),)
+ PKG_VERSION:=0.9.4
+ PKG_RELEASE:=1
-PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+ PKG_SOURCE:=madwifi-$(PKG_VERSION).tar.gz
+ PKG_SOURCE_URL:=http://downloads.sourceforge.net/madwifi/
+ PKG_MD5SUM:=399d20de8d855a59f20058857c2178ad
+
+ PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/madwifi-$(PKG_VERSION)
+
+ PATCH_DIR=./patches-upstream
+else
+# PKG_BRANCH:=madwifi-dfs
+ PKG_REV:=$(if $(CONFIG_MADWIFI_TESTING),3776,3314)
+ PKG_VERSION:=r$(PKG_REV)
+ PKG_RELEASE:=1
+
+ PKG_SOURCE_PROTO:=svn
+ PKG_SOURCE_VERSION:=$(PKG_REV)
+ PKG_SOURCE_SUBDIR:=$(if $(PKG_BRANCH),$(PKG_BRANCH),madwifi-trunk)-$(PKG_VERSION)
+ PKG_SOURCE_URL:=http://svn.madwifi.org/madwifi/$(if $(PKG_BRANCH),branches/$(PKG_BRANCH),trunk)
+ PKG_SOURCE:=$(PKG_SOURCE_SUBDIR).tar.gz
+
+ PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(if $(PKG_BRANCH),$(PKG_BRANCH),madwifi-trunk)-$(PKG_VERSION)
+
+ PATCH_DIR=$(if $(CONFIG_MADWIFI_TESTING),./patches-testing,./patches)
+endif
+
+include $(INCLUDE_DIR)/package.mk
+
+ifneq ($(CONFIG_TARGET_atheros),)
+ BUS:=AHB
+else
+ ifneq ($(CONFIG_PCI_SUPPORT),)
+ BUS:=PCI
+ endif
+endif
+
+# XXX: remove this check later when we have PCI support properly detected on all targets
+ifneq ($(CONFIG_TARGET_ar7)$(CONFIG_TARGET_uml),)
+ BUS:=
+endif
ifeq ($(ARCH),mips)
HAL_TARGET:=mips-be-elf
ifeq ($(ARCH),i386)
HAL_TARGET:=i386-elf
endif
-ifeq ($(ARCH),armeb)
+ifeq ($(ARCH),i686)
+ HAL_TARGET:=i386-elf
+endif
+ifeq ($(BOARD),ixp4xx)
HAL_TARGET:=xscale-be-elf
endif
-
-BUS := PCI
-ifneq ($(CONFIG_LINUX_2_4_AR531X),)
- BUS := AHB
+ifeq ($(BOARD),iop32x)
+ HAL_TARGET:=xscale-le-elf
+endif
+ifeq ($(BOARD),orion)
+ HAL_TARGET:=xscale-le-elf
+endif
+ifeq ($(ARCH),powerpc)
+ HAL_TARGET:=powerpc-be-elf
endif
-ifneq ($(CONFIG_LINUX_2_6_ARUBA),)
- BUS := PCI AHB # no suitable HAL for AHB yet.
+ifeq ($(BOARD),storm)
+ HAL_TARGET:=armv4-le-elf
+endif
+ifneq ($(CONFIG_TARGET_atheros),)
+ HAL_TARGET:=wisoc
endif
-BUS_MODULES:=
-ifeq ($(findstring AHB,$(BUS)),AHB)
- BUS_MODULES+=$(PKG_BUILD_DIR)/ath/ath_ahb.$(LINUX_KMOD_SUFFIX)
+ifdef CONFIG_MADWIFI_RCA_MINSTREL
+ RATE_CONTROL:=minstrel
endif
-ifeq ($(findstring PCI,$(BUS)),PCI)
- BUS_MODULES+=$(PKG_BUILD_DIR)/ath/ath_pci.$(LINUX_KMOD_SUFFIX)
+
+ifdef CONFIG_MADWIFI_RCA_ONOE
+ RATE_CONTROL:=onoe
+endif
+
+ifdef CONFIG_MADWIFI_RCA_AMRR
+ RATE_CONTROL:=amrr
endif
-MADWIFI_MAKEOPTS= -C $(PKG_BUILD_DIR) \
- PATH="$(TARGET_PATH)" \
- ARCH="$(LINUX_KARCH)" \
- CROSS_COMPILE="$(TARGET_CROSS)" \
- TARGET="$(HAL_TARGET)" \
- TOOLPREFIX="$(KERNEL_CROSS)" \
- TOOLPATH="$(KERNEL_CROSS)" \
- KERNELPATH="$(LINUX_DIR)" \
- LDOPTS="" \
- DOMULTI=1
+ifdef CONFIG_MADWIFI_RCA_SAMPLERATE
+ RATE_CONTROL:=sample
+endif
-include $(TOPDIR)/include/package.mk
+MADWIFI_FILES:= \
+ $(PKG_BUILD_DIR)/net80211/wlan.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/net80211/wlan_scan_ap.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/net80211/wlan_scan_sta.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/ath_hal/ath_hal.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/ath_rate/$(RATE_CONTROL)/ath_rate_$(RATE_CONTROL).$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/net80211/wlan_acl.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/net80211/wlan_ccmp.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/net80211/wlan_tkip.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/net80211/wlan_wep.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/net80211/wlan_xauth.$(LINUX_KMOD_SUFFIX) \
+
+MADWIFI_AUTOLOAD:= \
+ wlan \
+ wlan_scan_ap \
+ wlan_scan_sta \
+ ath_hal \
+ ath_rate_$(RATE_CONTROL) \
+ wlan_acl \
+ wlan_ccmp \
+ wlan_tkip \
+ wlan_wep \
+ wlan_xauth \
ifeq ($(findstring AHB,$(BUS)),AHB)
-define Build/Compile/ahb
- $(MAKE) $(MADWIFI_MAKEOPTS) BUS="AHB" all
-endef
+ MADWIFI_FILES+= $(PKG_BUILD_DIR)/ath/ath_ahb.$(LINUX_KMOD_SUFFIX)
+ MADWIFI_AUTOLOAD+= ath_ahb
endif
-
ifeq ($(findstring PCI,$(BUS)),PCI)
-define Build/Compile/pci
- $(MAKE) $(MADWIFI_MAKEOPTS) BUS="PCI" all
-endef
+ MADWIFI_FILES+= $(PKG_BUILD_DIR)/ath/ath_pci.$(LINUX_KMOD_SUFFIX)
+ MADWIFI_AUTOLOAD+= ath_pci
endif
-define Build/Compile
-$(call Build/Compile/ahb)
-$(call Build/Compile/pci)
+MADWIFI_APPLETS:=80211stats athchans athctrl athkey athstats wlanconfig $(if $(CONFIG_MADWIFI_TESTING),ath_info/)ath_info
+ifdef CONFIG_MADWIFI_DEBUG
+ MADWIFI_APPLETS += athdebug 80211debug
+endif
+ifndef CONFIG_MADWIFI_UPSTREAM
+ MADWIFI_APPLETS += madwifi_multi
+endif
+
+define KernelPackage/madwifi
+ SUBMENU:=Wireless Drivers
+ TITLE:=Driver for Atheros wireless chipsets
+ URL:=http://madwifi.org/
+ DEPENDS:=+wireless-tools @PCI_SUPPORT||TARGET_atheros @!TARGET_ar7 @!TARGET_avr32 @!TARGET_etrax @!TARGET_uml
+ FILES:=$(MADWIFI_FILES)
+ AUTOLOAD:=$(call AutoLoad,50,$(MADWIFI_AUTOLOAD))
endef
-define Build/InstallDev
- mkdir -p $(STAGING_DIR)/usr/include/madwifi
- $(CP) $(PKG_BUILD_DIR)/include $(STAGING_DIR)/usr/include/madwifi/
- mkdir -p $(STAGING_DIR)/usr/include/madwifi/net80211
- $(CP) $(PKG_BUILD_DIR)/net80211/*.h $(STAGING_DIR)/usr/include/madwifi/net80211/
+define KernelPackage/madwifi/description
+ This package contains a driver for Atheros 802.11a/b/g chipsets.
endef
-define Build/UninstallDev
- rm -rf $(STAGING_DIR)/usr/include/madwifi
+define KernelPackage/madwifi/config
+ source "$(SOURCE)/Config.in"
endef
-define Package/kmod-madwifi
- SECTION:=drivers
- CATEGORY:=Drivers
- DEFAULT:=y if LINUX_2_6_BRCM || LINUX_2_6_ARUBA || LINUX_2_4_AR531X || LINUX_2_6_XSCALE, m if ALL
- TITLE:=Driver for Atheros wireless chipsets
- DESCRIPTION:=Driver for Atheros 802.11a/b/g chipsets
- URL:=http://madwifi.org/
- VERSION:=$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE)
+MAKE_ARGS:= \
+ PATH="$(TARGET_PATH)" \
+ ARCH="$(LINUX_KARCH)" \
+ CROSS_COMPILE="$(TARGET_CROSS)" \
+ TARGET="$(HAL_TARGET)" \
+ TOOLPREFIX="$(KERNEL_CROSS)" \
+ TOOLPATH="$(KERNEL_CROSS)" \
+ KERNELPATH="$(LINUX_DIR)" \
+ LDOPTS="--no-warn-mismatch " \
+ ATH_RATE="ath_rate/$(RATE_CONTROL)" \
+ DO_MULTI=1
+
+ifneq ($(CONFIG_MADWIFI_TESTING),)
+ MAKE_ARGS += $(if $(CONFIG_MADWIFI_DEBUG),,ATH_DEBUG=)
+else
+ MAKE_ARGS += $(if $(CONFIG_MADWIFI_DEBUG),,DEBUG=) WARNINGS="-Wno-unused"
+endif
+
+MAKE_VARS:= \
+ COPTS="-DCONFIG_ATHEROS_RATE_DEFAULT='\"$(RATE_CONTROL)\"' -DATH_REVERSE_ENGINEERING=1" \
+
+ifeq ($(CONFIG_MADWIFI_UPSTREAM),)
+ HALFILE:=$(lastword $(sort $(wildcard ./ath_hal-*.tgz)))
+endif
+
+ifneq ($(HALFILE),)
+ define Build/Prepare/HAL
+ rm -rf $(PKG_BUILD_DIR)/tmp
+ mkdir -p $(PKG_BUILD_DIR)/tmp
+ tar xvzf $(HALFILE) -C $(PKG_BUILD_DIR)/tmp
+ $(CP) $(PKG_BUILD_DIR)/tmp/ath_hal*/* $(PKG_BUILD_DIR)/hal/
+ rm -rf $(PKG_BUILD_DIR)/tmp
+ endef
+endif
+
+define Build/Prepare
+ $(call Build/Prepare/Default)
+ $(call Build/Prepare/HAL)
+ # patch cflags
+ $(SED) 's, -E[LB],,' \
+ -e 's, -mips2,,' \
+ -e 's, -mapcs-32,,' \
+ $(PKG_BUILD_DIR)/hal/public/*.inc
+ $(SED) 's,march=armv4,march=armv5te,' \
+ $(PKG_BUILD_DIR)/hal/public/xscale*.inc
endef
-define Package/kmod-madwifi/install
- mkdir -p $(1)/etc/modules.d
- mkdir -p $(1)/etc/init.d
- mkdir -p $(1)/lib/modules/$(LINUX_VERSION)
- mkdir -p $(1)/usr/sbin
- install -m0644 ./files/madwifi.modules $(1)/etc/modules.d/20-madwifi
ifeq ($(findstring AHB,$(BUS)),AHB)
- echo ath_ahb >> $(1)/etc/modules.d/20-madwifi
+ define Build/Compile/ahb
+ $(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) BUS="AHB" modules
+ $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) CFLAGS="$(TARGET_CFLAGS)" tools
+ endef
endif
+
ifeq ($(findstring PCI,$(BUS)),PCI)
- echo ath_pci >> $(1)/etc/modules.d/20-madwifi
-endif
- install -m0755 ./files/madwifi.init $(1)/etc/init.d/S20madwifi
- $(CP) \
- $(PKG_BUILD_DIR)/ath_hal/ath_hal.$(LINUX_KMOD_SUFFIX) \
- $(BUS_MODULES) \
- $(PKG_BUILD_DIR)/ath_rate/sample/ath_rate_sample.$(LINUX_KMOD_SUFFIX) \
- $(PKG_BUILD_DIR)/net80211/*.$(LINUX_KMOD_SUFFIX) \
- $(1)/lib/modules/$(LINUX_VERSION)/
- $(CP) $(PKG_BUILD_DIR)/tools/{madwifi_multi,80211debug,80211stats,athchans,athctrl,athdebug,athkey,athstats,wlanconfig} $(1)/usr/sbin/
+ define Build/Compile/pci
+ $(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) BUS="PCI" modules
+ $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) CFLAGS="$(TARGET_CFLAGS)" tools
+ endef
+endif
+
+define Build/Configure
+ $(SED) 's,-E[LB] ,,g' $(PKG_BUILD_DIR)/hal/public/*.inc
+endef
+
+define Build/Compile
+ $(call Build/Compile/ahb)
+ $(call Build/Compile/pci)
+endef
+
+define Build/InstallDev
+ mkdir -p $(1)/usr/include/madwifi
+ $(CP) $(PKG_BUILD_DIR)/include $(1)/usr/include/madwifi/
+ mkdir -p $(1)/usr/include/madwifi/net80211
+ $(CP) $(PKG_BUILD_DIR)/net80211/*.h $(1)/usr/include/madwifi/net80211/
+endef
+
+define KernelPackage/madwifi/install
+ $(INSTALL_DIR) $(1)/usr/sbin
+ $(CP) ./files/* $(1)/
+ $(CP) $(foreach applet,$(MADWIFI_APPLETS),$(PKG_BUILD_DIR)/tools/$(applet)) $(1)/usr/sbin/
endef
-$(eval $(call BuildPackage,kmod-madwifi))
+$(eval $(call KernelPackage,madwifi))
projects / openwrt.git / blobdiff