+--- a/drivers/ssb/pcmcia.c
++++ b/drivers/ssb/pcmcia.c
+@@ -3,7 +3,7 @@
+ * PCMCIA-Hostbus related functions
+ *
+ * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
+- * Copyright 2007-2008 Michael Buesch <mb@bu3sch.de>
++ * Copyright 2007-2008 Michael Buesch <m@bues.ch>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+--- a/drivers/ssb/scan.c
++++ b/drivers/ssb/scan.c
+@@ -2,7 +2,7 @@
+ * Sonics Silicon Backplane
+ * Bus scanning
+ *
+- * Copyright (C) 2005-2007 Michael Buesch <mb@bu3sch.de>
++ * Copyright (C) 2005-2007 Michael Buesch <m@bues.ch>
+ * Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
+ * Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
+ * Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
+@@ -310,8 +310,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ } else {
+ if (bus->bustype == SSB_BUSTYPE_PCI) {
+ bus->chip_id = pcidev_to_chipid(bus->host_pci);
+- pci_read_config_byte(bus->host_pci, PCI_REVISION_ID,
+- &bus->chip_rev);
++ bus->chip_rev = bus->host_pci->revision;
+ bus->chip_package = 0;
+ } else {
+ bus->chip_id = 0x4710;
+--- a/drivers/ssb/sdio.c
++++ b/drivers/ssb/sdio.c
+@@ -6,7 +6,7 @@
+ *
+ * Based on drivers/ssb/pcmcia.c
+ * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
+- * Copyright 2007-2008 Michael Buesch <mb@bu3sch.de>
++ * Copyright 2007-2008 Michael Buesch <m@bues.ch>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ *
+--- a/drivers/ssb/sprom.c
++++ b/drivers/ssb/sprom.c
+@@ -2,7 +2,7 @@
+ * Sonics Silicon Backplane
+ * Common SPROM support routines
+ *
+- * Copyright (C) 2005-2008 Michael Buesch <mb@bu3sch.de>
++ * Copyright (C) 2005-2008 Michael Buesch <m@bues.ch>
+ * Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
+ * Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
+ * Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
+--- a/include/linux/ssb/ssb.h
++++ b/include/linux/ssb/ssb.h
+@@ -25,8 +25,10 @@ struct ssb_sprom {
+ u8 et1phyaddr; /* MII address for enet1 */
+ u8 et0mdcport; /* MDIO for enet0 */
+ u8 et1mdcport; /* MDIO for enet1 */
+- u8 board_rev; /* Board revision number from SPROM. */
++ u16 board_rev; /* Board revision number from SPROM. */
+ u8 country_code; /* Country Code */
++ u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */
++ u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */
+ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */
+ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */
+ u16 pa0b0;
+@@ -92,6 +94,15 @@ struct ssb_sprom {
+ } ghz5; /* 5GHz band */
+ } antenna_gain;
+
++ struct {
++ struct {
++ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut;
++ } ghz2;
++ struct {
++ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut;
++ } ghz5;
++ } fem;
++
+ /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
+ };
+
+@@ -99,7 +110,7 @@ struct ssb_sprom {
+ struct ssb_boardinfo {
+ u16 vendor;
+ u16 type;
+- u16 rev;
++ u8 rev;
+ };
+
+
+@@ -229,10 +240,9 @@ struct ssb_driver {
+ #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv)
+
+ extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner);
+-static inline int ssb_driver_register(struct ssb_driver *drv)
+-{
+- return __ssb_driver_register(drv, THIS_MODULE);
+-}
++#define ssb_driver_register(drv) \
++ __ssb_driver_register(drv, THIS_MODULE)
++
+ extern void ssb_driver_unregister(struct ssb_driver *drv);
+
+
+--- a/include/linux/ssb/ssb_driver_chipcommon.h
++++ b/include/linux/ssb/ssb_driver_chipcommon.h
+@@ -8,7 +8,7 @@
+ * gpio interface, extbus, and support for serial and parallel flashes.
+ *
+ * Copyright 2005, Broadcom Corporation
+- * Copyright 2006, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2006, Michael Buesch <m@bues.ch>
+ *
+ * Licensed under the GPL version 2. See COPYING for details.
+ */
+--- a/include/linux/ssb/ssb_regs.h
++++ b/include/linux/ssb/ssb_regs.h
+@@ -432,6 +432,23 @@
+ #define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */
+ #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */
+ #define SSB_SPROM8_RXPO5G_SHIFT 8
++#define SSB_SPROM8_FEM2G 0x00AE
++#define SSB_SPROM8_FEM5G 0x00B0
++#define SSB_SROM8_FEM_TSSIPOS 0x0001
++#define SSB_SROM8_FEM_TSSIPOS_SHIFT 0
++#define SSB_SROM8_FEM_EXTPA_GAIN 0x0006
++#define SSB_SROM8_FEM_EXTPA_GAIN_SHIFT 1
++#define SSB_SROM8_FEM_PDET_RANGE 0x00F8
++#define SSB_SROM8_FEM_PDET_RANGE_SHIFT 3
++#define SSB_SROM8_FEM_TR_ISO 0x0700
++#define SSB_SROM8_FEM_TR_ISO_SHIFT 8
++#define SSB_SROM8_FEM_ANTSWLUT 0xF800
++#define SSB_SROM8_FEM_ANTSWLUT_SHIFT 11
++#define SSB_SPROM8_THERMAL 0x00B2
++#define SSB_SPROM8_MPWR_RAWTS 0x00B4
++#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6
++#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8
++#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA
+ #define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */
+ #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
+ #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
+@@ -462,6 +479,46 @@
+ #define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */
+ #define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */
+
++/* Values for boardflags_lo read from SPROM */
++#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */
++#define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */
++#define SSB_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */
++#define SSB_BFL_RSSI 0x0008 /* software calculates nrssi slope. */
++#define SSB_BFL_ENETSPI 0x0010 /* has ephy roboswitch spi */
++#define SSB_BFL_XTAL_NOSLOW 0x0020 /* no slow clock available */
++#define SSB_BFL_CCKHIPWR 0x0040 /* can do high power CCK transmission */
++#define SSB_BFL_ENETADM 0x0080 /* has ADMtek switch */
++#define SSB_BFL_ENETVLAN 0x0100 /* can do vlan */
++#define SSB_BFL_AFTERBURNER 0x0200 /* supports Afterburner mode */
++#define SSB_BFL_NOPCI 0x0400 /* board leaves PCI floating */
++#define SSB_BFL_FEM 0x0800 /* supports the Front End Module */
++#define SSB_BFL_EXTLNA 0x1000 /* has an external LNA */
++#define SSB_BFL_HGPA 0x2000 /* had high gain PA */
++#define SSB_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */
++#define SSB_BFL_ALTIQ 0x8000 /* alternate I/Q settings */
++
++/* Values for boardflags_hi read from SPROM */
++#define SSB_BFH_NOPA 0x0001 /* has no PA */
++#define SSB_BFH_RSSIINV 0x0002 /* RSSI uses positive slope (not TSSI) */
++#define SSB_BFH_PAREF 0x0004 /* uses the PARef LDO */
++#define SSB_BFH_3TSWITCH 0x0008 /* uses a triple throw switch shared with bluetooth */
++#define SSB_BFH_PHASESHIFT 0x0010 /* can support phase shifter */
++#define SSB_BFH_BUCKBOOST 0x0020 /* has buck/booster */
++#define SSB_BFH_FEM_BT 0x0040 /* has FEM and switch to share antenna with bluetooth */
++
++/* Values for boardflags2_lo read from SPROM */
++#define SSB_BFL2_RXBB_INT_REG_DIS 0x0001 /* external RX BB regulator present */
++#define SSB_BFL2_APLL_WAR 0x0002 /* alternative A-band PLL settings implemented */
++#define SSB_BFL2_TXPWRCTRL_EN 0x0004 /* permits enabling TX Power Control */
++#define SSB_BFL2_2X4_DIV 0x0008 /* 2x4 diversity switch */
++#define SSB_BFL2_5G_PWRGAIN 0x0010 /* supports 5G band power gain */
++#define SSB_BFL2_PCIEWAR_OVR 0x0020 /* overrides ASPM and Clkreq settings */
++#define SSB_BFL2_CAESERS_BRD 0x0040 /* is Caesers board (unused) */
++#define SSB_BFL2_BTC3WIRE 0x0080 /* used 3-wire bluetooth coexist */
++#define SSB_BFL2_SKWRKFEM_BRD 0x0100 /* 4321mcm93 uses Skyworks FEM */
++#define SSB_BFL2_SPUR_WAR 0x0200 /* has a workaround for clock-harmonic spurs */
++#define SSB_BFL2_GPLL_WAR 0x0400 /* altenative G-band PLL settings implemented */
++
+ /* Values for SSB_SPROM1_BINF_CCODE */
+ enum {
+ SSB_SPROM1CCODE_WORLD = 0,
projects / openwrt.git / blobdiff