ath9k: allow run-time change of the chanbw debugfs file

[openwrt.git] / target / linux / generic / patches-3.0 / 020-ssb_update.patch

diff --git a/target/linux/generic/patches-3.0/020-ssb_update.patch b/target/linux/generic/patches-3.0/020-ssb_update.patch
index 3282ff0..74e9c7f 100644 (file)
--- a/target/linux/generic/patches-3.0/020-ssb_update.patch
+++ b/target/linux/generic/patches-3.0/020-ssb_update.patch
@@ -77,15 +77,17 @@
  {
        u16 tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(0));
        if (((tmp & 0xF000) >> 12) != pc->dev->core_index) {
  {
        u16 tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(0));
        if (((tmp & 0xF000) >> 12) != pc->dev->core_index) {

-@@ -514,13 +514,13 @@ static void ssb_pcicore_pcie_setup_worka
+@@ -514,7 +514,7 @@ static void ssb_pcicore_pcie_setup_worka

   * Generic and Clientmode operation code.
   **************************************************/
  
 -static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc)
 +static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc)
  {
   * Generic and Clientmode operation code.
   **************************************************/
  
 -static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc)
 +static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc)
  {

-       /* Disable PCI interrupts. */
-       ssb_write32(pc->dev, SSB_INTVEC, 0);
+       ssb_pcicore_fix_sprom_core_index(pc);
+ 
+@@ -529,7 +529,7 @@ static void ssb_pcicore_init_clientmode(
+       }

  }
  
 -void ssb_pcicore_init(struct ssb_pcicore *pc)
  }
  
 -void ssb_pcicore_init(struct ssb_pcicore *pc)


@@ -166,6 +168,47 @@
  {
        int err;
  
  {
        int err;
  

+@@ -1001,8 +1002,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32
+       switch (plltype) {
+       case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
+               if (m & SSB_CHIPCO_CLK_T6_MMASK)
+-                      return SSB_CHIPCO_CLK_T6_M0;
+-              return SSB_CHIPCO_CLK_T6_M1;
++                      return SSB_CHIPCO_CLK_T6_M1;
++              return SSB_CHIPCO_CLK_T6_M0;
+       case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
+       case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
+       case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
+@@ -1265,7 +1266,10 @@ u32 ssb_dma_translation(struct ssb_devic
+       case SSB_BUSTYPE_SSB:
+               return 0;
+       case SSB_BUSTYPE_PCI:
+-              return SSB_PCI_DMA;
++              if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64)
++                      return SSB_PCIE_DMA_H32;
++              else
++                      return SSB_PCI_DMA;
+       default:
+               __ssb_dma_not_implemented(dev);
+       }
+--- a/drivers/ssb/pci.c
++++ b/drivers/ssb/pci.c
+@@ -734,12 +734,9 @@ out_free:
+ static void ssb_pci_get_boardinfo(struct ssb_bus *bus,
+                                 struct ssb_boardinfo *bi)
+ {
+-      pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_VENDOR_ID,
+-                           &bi->vendor);
+-      pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_ID,
+-                           &bi->type);
+-      pci_read_config_word(bus->host_pci, PCI_REVISION_ID,
+-                           &bi->rev);
++      bi->vendor = bus->host_pci->subsystem_vendor;
++      bi->type = bus->host_pci->subsystem_device;
++      bi->rev = bus->host_pci->revision;
+ }
+ 
+ int ssb_pci_get_invariants(struct ssb_bus *bus,

 --- a/drivers/ssb/pcihost_wrapper.c
 +++ b/drivers/ssb/pcihost_wrapper.c
 @@ -53,8 +53,8 @@ static int ssb_pcihost_resume(struct pci
 --- a/drivers/ssb/pcihost_wrapper.c
 +++ b/drivers/ssb/pcihost_wrapper.c
 @@ -53,8 +53,8 @@ static int ssb_pcihost_resume(struct pci


@@ -188,3 +231,35 @@
  {
        driver->probe = ssb_pcihost_probe;
        driver->remove = ssb_pcihost_remove;
  {
        driver->probe = ssb_pcihost_probe;
        driver->remove = ssb_pcihost_remove;

+--- a/drivers/ssb/scan.c
++++ b/drivers/ssb/scan.c
+@@ -310,8 +310,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+       } else {
+               if (bus->bustype == SSB_BUSTYPE_PCI) {
+                       bus->chip_id = pcidev_to_chipid(bus->host_pci);
+-                      pci_read_config_byte(bus->host_pci, PCI_REVISION_ID,
+-                                           &bus->chip_rev);
++                      bus->chip_rev = bus->host_pci->revision;
+                       bus->chip_package = 0;
+               } else {
+                       bus->chip_id = 0x4710;
+--- a/include/linux/ssb/ssb.h
++++ b/include/linux/ssb/ssb.h
+@@ -27,6 +27,8 @@ struct ssb_sprom {
+       u8 et1mdcport;          /* MDIO for enet1 */
+       u8 board_rev;           /* Board revision number from SPROM. */
+       u8 country_code;        /* Country Code */
++      u16 leddc_on_time;      /* LED Powersave Duty Cycle On Count */
++      u16 leddc_off_time;     /* LED Powersave Duty Cycle Off Count */
+       u8 ant_available_a;     /* 2GHz antenna available bits (up to 4) */
+       u8 ant_available_bg;    /* 5GHz antenna available bits (up to 4) */
+       u16 pa0b0;
+@@ -99,7 +101,7 @@ struct ssb_sprom {
+ struct ssb_boardinfo {
+       u16 vendor;
+       u16 type;
+-      u16 rev;
++      u8  rev;
+ };
+ 
+