[rdc] convert gpio code to use gpiolib, make rdc321x:dmz led work again

[openwrt.git] / target / linux / ar71xx / patches-2.6.30 / 101-ksz8041_phy_driver.patch

diff --git a/target/linux/ar71xx/patches-2.6.30/101-ksz8041_phy_driver.patch b/target/linux/ar71xx/patches-2.6.30/101-ksz8041_phy_driver.patch
index 828a3f9..d02addb 100644 (file)
--- a/target/linux/ar71xx/patches-2.6.30/101-ksz8041_phy_driver.patch
+++ b/target/linux/ar71xx/patches-2.6.30/101-ksz8041_phy_driver.patch
@@ -1,7 +1,7 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -104,6 +104,11 @@ config AR8216_PHY
-       tristate "Driver for Atheros AR8216 switches"
+@@ -108,6 +108,11 @@ config RTL8306_PHY
+       tristate "Driver for Realtek RTL8306S switches"
        select SWCONFIG
  
 +config MICREL_PHY
@@ -14,9 +14,9 @@
        depends on PHYLIB=y
 --- a/drivers/net/phy/Makefile
 +++ b/drivers/net/phy/Makefile
-@@ -19,6 +19,7 @@ obj-$(CONFIG_IP175C_PHY)     += ip175c.o
- obj-$(CONFIG_REALTEK_PHY)     += realtek.o
+@@ -20,6 +20,7 @@ obj-$(CONFIG_REALTEK_PHY)    += realtek.o
  obj-$(CONFIG_AR8216_PHY)      += ar8216.o
+ obj-$(CONFIG_RTL8306_PHY)     += rtl8306.o
  obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
 +obj-$(CONFIG_MICREL)          += micrel.o
  obj-$(CONFIG_FIXED_PHY)               += fixed.o