we need CONFIG_NET_SCHED for 802.11n

[openwrt.git] / target / linux / ar7 / files / drivers / vlynq / vlynq.c

diff --git a/target/linux/ar7/files/drivers/vlynq/vlynq.c b/target/linux/ar7/files/drivers/vlynq/vlynq.c
index 14022b1..f4b7b0f 100644 (file)
--- a/target/linux/ar7/files/drivers/vlynq/vlynq.c
+++ b/target/linux/ar7/files/drivers/vlynq/vlynq.c
@@ -40,6 +40,8 @@
 #define VLYNQ_CTRL_INT2CFG             0x00000080
 #define VLYNQ_CTRL_RESET               0x00000001
 
 #define VLYNQ_CTRL_INT2CFG             0x00000080
 #define VLYNQ_CTRL_RESET               0x00000001
 

+#define VLYNQ_CTRL_CLOCK_MASK          (0x7 << 16)
+

 #define VLYNQ_INT_OFFSET               0x00000014
 #define VLYNQ_REMOTE_OFFSET            0x00000080
 
 #define VLYNQ_INT_OFFSET               0x00000014
 #define VLYNQ_REMOTE_OFFSET            0x00000080
 


@@ -114,6 +116,24 @@ int vlynq_linked(struct vlynq_device *dev)
        return 0;
 }
 
        return 0;
 }
 

+static void vlynq_reset(struct vlynq_device *dev)
+{
+       vlynq_reg_write(dev->local->control,
+                       vlynq_reg_read(dev->local->control) |
+                       VLYNQ_CTRL_RESET);
+
+       /* Wait for the devices to finish resetting */
+       msleep(5);
+
+       /* Remove reset bit */
+       vlynq_reg_write(dev->local->control,
+                       vlynq_reg_read(dev->local->control) &
+                       ~VLYNQ_CTRL_RESET);
+
+       /* Give some time for the devices to settle */
+       msleep(5);
+}
+

 static void vlynq_irq_unmask(unsigned int irq)
 {
        u32 val;
 static void vlynq_irq_unmask(unsigned int irq)
 {
        u32 val;


@@ -357,9 +377,100 @@ void vlynq_unregister_driver(struct vlynq_driver *driver)
 }
 EXPORT_SYMBOL(vlynq_unregister_driver);
 
 }
 EXPORT_SYMBOL(vlynq_unregister_driver);
 

+static int __vlynq_try_remote(struct vlynq_device *dev)
+{
+       int i;
+
+       vlynq_reset(dev);
+       for (i = dev->dev_id ? vlynq_rdiv2 : vlynq_rdiv8; dev->dev_id ?
+                       i <= vlynq_rdiv8 : i >= vlynq_rdiv2;
+               dev->dev_id ? i++ : i--) {
+
+               if (!vlynq_linked(dev))
+                       break;
+
+               vlynq_reg_write(dev->remote->control,
+                               (vlynq_reg_read(dev->remote->control) &
+                               ~VLYNQ_CTRL_CLOCK_MASK) |
+                               VLYNQ_CTRL_CLOCK_INT |
+                               VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1));
+               vlynq_reg_write(dev->local->control,
+                               ((vlynq_reg_read(dev->local->control)
+                               & ~(VLYNQ_CTRL_CLOCK_INT |
+                               VLYNQ_CTRL_CLOCK_MASK)) |
+                               VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1)));
+
+               if (vlynq_linked(dev)) {
+                       printk(KERN_DEBUG
+                               "%s: using remote clock divisor %d\n",
+                               dev->dev.bus_id, i - vlynq_rdiv1 + 1);
+                       dev->divisor = i;
+                       return 0;
+               } else {
+                       vlynq_reset(dev);
+               }
+       }
+
+       return -ENODEV;
+}
+
+static int __vlynq_try_local(struct vlynq_device *dev)
+{
+       int i;
+       
+       vlynq_reset(dev);
+
+       for (i = dev->dev_id ? vlynq_ldiv2 : vlynq_ldiv8; dev->dev_id ?
+                       i <= vlynq_ldiv8 : i >= vlynq_ldiv2;
+               dev->dev_id ? i++ : i--) {
+
+               vlynq_reg_write(dev->local->control,
+                               (vlynq_reg_read(dev->local->control) &
+                               ~VLYNQ_CTRL_CLOCK_MASK) |
+                               VLYNQ_CTRL_CLOCK_INT |
+                               VLYNQ_CTRL_CLOCK_DIV(i - vlynq_ldiv1));
+
+               if (vlynq_linked(dev)) {
+                       printk(KERN_DEBUG
+                               "%s: using local clock divisor %d\n",
+                               dev->dev.bus_id, i - vlynq_ldiv1 + 1);
+                       dev->divisor = i;
+                       return 0;
+               } else {
+                       vlynq_reset(dev);
+               }
+       }
+
+       return -ENODEV;
+}
+
+static int __vlynq_try_external(struct vlynq_device *dev)
+{
+       vlynq_reset(dev);
+       if (!vlynq_linked(dev))
+               return -ENODEV;
+
+       vlynq_reg_write(dev->remote->control,
+                       (vlynq_reg_read(dev->remote->control) &
+                       ~VLYNQ_CTRL_CLOCK_INT));
+
+       vlynq_reg_write(dev->local->control,
+                       (vlynq_reg_read(dev->local->control) &
+                       ~VLYNQ_CTRL_CLOCK_INT));
+
+       if (vlynq_linked(dev)) {
+               printk(KERN_DEBUG "%s: using external clock\n",
+                       dev->dev.bus_id);
+                       dev->divisor = vlynq_div_external;
+               return 0;
+       }
+       
+       return -ENODEV;
+}
+

 static int __vlynq_enable_device(struct vlynq_device *dev)
 {
 static int __vlynq_enable_device(struct vlynq_device *dev)
 {

-       int i, result;
+       int result;

        struct plat_vlynq_ops *ops = dev->dev.platform_data;
 
        result = ops->on(dev);
        struct plat_vlynq_ops *ops = dev->dev.platform_data;
 
        result = ops->on(dev);


@@ -367,30 +478,25 @@ static int __vlynq_enable_device(struct vlynq_device *dev)
                return result;
 
        switch (dev->divisor) {
                return result;
 
        switch (dev->divisor) {

+       case vlynq_div_external:

        case vlynq_div_auto:
        case vlynq_div_auto:

-               /* Only try locally supplied clock, others cause problems */
-               vlynq_reg_write(dev->local->control, 0);
-               vlynq_reg_write(dev->remote->control, 0);
-               if (vlynq_linked(dev)) {
-                       dev->divisor = vlynq_div_external;
-                       printk(KERN_DEBUG "%s: using external clock\n",
-                               dev->dev.bus_id);
-                       return 0;
-               }
-               for (i = dev->dev_id ? vlynq_ldiv2 : vlynq_ldiv8; dev->dev_id ?
-                               i <= vlynq_ldiv8 : i >= vlynq_ldiv2;
-                               dev->dev_id ? i++ : i--) {
-                       vlynq_reg_write(dev->local->control,
-                                       VLYNQ_CTRL_CLOCK_INT |
-                                       VLYNQ_CTRL_CLOCK_DIV(i - vlynq_ldiv1));
-                       if (vlynq_linked(dev)) {
-                               printk(KERN_DEBUG
-                                      "%s: using local clock divisor %d\n",
-                                      dev->dev.bus_id, i - vlynq_ldiv1 + 1);
-                               dev->divisor = i;
+               /* When the device is brought from reset it should have clock
+               generation negotiated by hardware.
+               Check which device is generating clocks and perform setup
+               accordingly */
+               if (vlynq_linked(dev) && vlynq_reg_read(dev->remote->control) &
+                  VLYNQ_CTRL_CLOCK_INT) {
+                       if (!__vlynq_try_remote(dev) ||
+                               !__vlynq_try_local(dev)  ||
+                               !__vlynq_try_external(dev))
+                               return 0;
+               } else {
+                       if (!__vlynq_try_external(dev) ||
+                               !__vlynq_try_local(dev)    ||
+                               !__vlynq_try_remote(dev))

                                return 0;
                                return 0;

-                       }

                }
                }

+               break;

        case vlynq_ldiv1: case vlynq_ldiv2: case vlynq_ldiv3: case vlynq_ldiv4:
        case vlynq_ldiv5: case vlynq_ldiv6: case vlynq_ldiv7: case vlynq_ldiv8:
                vlynq_reg_write(dev->local->control,
        case vlynq_ldiv1: case vlynq_ldiv2: case vlynq_ldiv3: case vlynq_ldiv4:
        case vlynq_ldiv5: case vlynq_ldiv6: case vlynq_ldiv7: case vlynq_ldiv8:
                vlynq_reg_write(dev->local->control,