-Index: linux-2.6.35/arch/arm/mach-omap1/board-nokia770.c
-===================================================================
---- linux-2.6.35.orig/arch/arm/mach-omap1/board-nokia770.c 2010-08-08 12:56:15.000000000 +0200
-+++ linux-2.6.35/arch/arm/mach-omap1/board-nokia770.c 2010-08-08 12:56:30.000000000 +0200
+---
+ arch/arm/mach-omap1/board-nokia770.c | 16 +
+ arch/arm/mach-omap2/Kconfig | 10 +
+ arch/arm/mach-omap2/Makefile | 2
+ arch/arm/mach-omap2/board-n8x0-lcd.c | 127 +++++++++++++
+ arch/arm/mach-omap2/board-n8x0-usb.c | 175 +++++++++++++++++++
+ arch/arm/mach-omap2/board-n8x0.c | 319 +++++++++++++++++++++++++----------
+ arch/arm/mach-omap2/control.c | 2
+ arch/arm/mach-omap2/serial.c | 8
+ 8 files changed, 569 insertions(+), 90 deletions(-)
+
+--- linux-2.6.35.3.orig/arch/arm/mach-omap1/board-nokia770.c
++++ linux-2.6.35.3/arch/arm/mach-omap1/board-nokia770.c
@@ -37,6 +37,7 @@
#include <plat/lcd_mipid.h>
#include <plat/mmc.h>
};
static void mipid_shutdown(struct mipid_platform_data *pdata)
-Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c
-===================================================================
---- linux-2.6.35.orig/arch/arm/mach-omap2/board-n8x0.c 2010-08-08 12:56:15.000000000 +0200
-+++ linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c 2010-08-08 12:56:30.000000000 +0200
+--- linux-2.6.35.3.orig/arch/arm/mach-omap2/board-n8x0.c
++++ linux-2.6.35.3/arch/arm/mach-omap2/board-n8x0.c
@@ -18,8 +18,12 @@
#include <linux/io.h>
#include <linux/stddef.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-@@ -32,6 +36,117 @@
+@@ -32,114 +36,156 @@
#include <plat/onenand.h>
#include <plat/mmc.h>
#include <plat/serial.h>
+#include <plat/cbus.h>
-+
+
+-static int slot1_cover_open;
+-static int slot2_cover_open;
+-static struct device *mmc_device;
+#define RX51_TSC2005_RESET_GPIO 94
+#define RX51_TSC2005_IRQ_GPIO 106
+#define OMAP_TAG_NOKIA_BT 0x4e01
+ [0x53] = KEY_DOWN,
+ [0x55] = KEY_ENTER,
+ [0x5f] = KEY_ESC,
-+
+
+-#define TUSB6010_ASYNC_CS 1
+-#define TUSB6010_SYNC_CS 4
+-#define TUSB6010_GPIO_INT 58
+-#define TUSB6010_GPIO_ENABLE 0
+-#define TUSB6010_DMACHAN 0x3f
+ [0x61] = KEY_U,
+ [0x64] = KEY_LEFT,
-+
+
+-#if defined(CONFIG_USB_TUSB6010) || \
+- defined(CONFIG_USB_TUSB6010_MODULE)
+-/*
+- * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
+- * 1.5 V voltage regulators of PM companion chip. Companion chip will then
+- * provide then PGOOD signal to TUSB6010 which will release it from reset.
+- */
+-static int tusb_set_power(int state)
+-{
+- int i, retval = 0;
+ [0x71] = KEY_I,
+ [0x75] = KEY_KPENTER,
+};
-+
+
+- if (state) {
+- gpio_set_value(TUSB6010_GPIO_ENABLE, 1);
+- msleep(1);
+static struct lm8323_platform_data lm8323_pdata = {
+ .repeat = 0, /* Repeat is handled in userspace for now. */
+ .keymap = rx44_keymap,
+ //.pwm1_name = "n810::keyboard",
+ //.pwm2_name = "n810::cover",
+};
-+
+
+- /* Wait until TUSB6010 pulls INT pin down */
+- i = 100;
+- while (i && gpio_get_value(TUSB6010_GPIO_INT)) {
+- msleep(1);
+- i--;
+- }
+struct omap_bluetooth_config {
+ u8 chip_type;
+ u8 bt_wakeup_gpio;
+ u8 bd_addr[6];
+ u8 bt_sysclk;
+};
-+
+
+- if (!i) {
+- printk(KERN_ERR "tusb: powerup failed\n");
+- retval = -ENODEV;
+- }
+- } else {
+- gpio_set_value(TUSB6010_GPIO_ENABLE, 0);
+- msleep(10);
+- }
+static struct platform_device n8x0_bt_device = {
+ .name = "hci_h4p",
+ .id = -1,
+void __init n8x0_bt_init(void)
+{
+ const struct omap_bluetooth_config *bt_config;
-+
+
+- return retval;
+ bt_config = (void *) omap_get_config(OMAP_TAG_NOKIA_BT,
+ struct omap_bluetooth_config);
+ n8x0_bt_device.dev.platform_data = (void *) bt_config;
+ if (platform_device_register(&n8x0_bt_device) < 0)
+ BUG();
-+}
-+
+ }
+
+-static struct musb_hdrc_config musb_config = {
+- .multipoint = 1,
+- .dyn_fifo = 1,
+- .num_eps = 16,
+- .ram_bits = 12,
+static struct omap2_mcspi_device_config mipid_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1,
-+};
-
- static int slot1_cover_open;
- static int slot2_cover_open;
-@@ -139,7 +254,34 @@ static struct omap2_mcspi_device_config
- .single_channel = 1,
};
+-static struct musb_hdrc_platform_data tusb_data = {
+-#if defined(CONFIG_USB_MUSB_OTG)
+- .mode = MUSB_OTG,
+-#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
+- .mode = MUSB_PERIPHERAL,
+-#else /* defined(CONFIG_USB_MUSB_HOST) */
+- .mode = MUSB_HOST,
+-#endif
+- .set_power = tusb_set_power,
+- .min_power = 25, /* x2 = 50 mA drawn from VBUS as peripheral */
+- .power = 100, /* Max 100 mA VBUS for host mode */
+- .config = &musb_config,
+-};
+-
+-static void __init n8x0_usb_init(void)
+-{
+- int ret = 0;
+- static char announce[] __initdata = KERN_INFO "TUSB 6010\n";
+-
+- /* PM companion chip power control pin */
+- ret = gpio_request(TUSB6010_GPIO_ENABLE, "TUSB6010 enable");
+- if (ret != 0) {
+- printk(KERN_ERR "Could not get TUSB power GPIO%i\n",
+- TUSB6010_GPIO_ENABLE);
+- return;
+- }
+- gpio_direction_output(TUSB6010_GPIO_ENABLE, 0);
+-
+- tusb_set_power(0);
++static int slot1_cover_open;
++static int slot2_cover_open;
++static struct device *mmc_device;
+
+- ret = tusb6010_setup_interface(&tusb_data, TUSB6010_REFCLK_19, 2,
+- TUSB6010_ASYNC_CS, TUSB6010_SYNC_CS,
+- TUSB6010_GPIO_INT, TUSB6010_DMACHAN);
+- if (ret != 0)
+- goto err;
+
+- printk(announce);
++static struct omap2_mcspi_device_config p54spi_mcspi_config = {
++ .turbo_mode = 0,
++ .single_channel = 1,
++};
+
+- return;
+#ifdef CONFIG_MACH_NOKIA_N8X0_LCD
+extern struct mipid_platform_data n8x0_mipid_platform_data;
+#endif
-+
+
+-err:
+- gpio_free(TUSB6010_GPIO_ENABLE);
+#ifdef CONFIG_TOUCHSCREEN_TSC2005
+static struct tsc2005_platform_data tsc2005_config;
+static void rx51_tsc2005_set_reset(bool enable)
+{
+ gpio_set_value(RX51_TSC2005_RESET_GPIO, enable);
-+}
-+
+ }
+-#else
+-
+-static void __init n8x0_usb_init(void) {}
+-
+-#endif /*CONFIG_USB_TUSB6010 */
+
+-
+-static struct omap2_mcspi_device_config p54spi_mcspi_config = {
+static struct omap2_mcspi_device_config tsc2005_mcspi_config = {
-+ .turbo_mode = 0,
-+ .single_channel = 1,
-+};
+ .turbo_mode = 0,
+ .single_channel = 1,
+ };
+#endif
-+
+
static struct spi_board_info n800_spi_board_info[] __initdata = {
+#ifdef CONFIG_MACH_NOKIA_N8X0_LCD
+ {
{
.modalias = "p54spi",
.bus_num = 2,
-@@ -147,6 +289,68 @@ static struct spi_board_info n800_spi_bo
+@@ -147,6 +193,68 @@ static struct spi_board_info n800_spi_bo
.max_speed_hz = 48000000,
.controller_data = &p54spi_mcspi_config,
},
};
#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-@@ -181,6 +385,20 @@ static struct mtd_partition onenand_part
+@@ -181,6 +289,20 @@ static struct mtd_partition onenand_part
},
};
static struct omap_onenand_platform_data board_onenand_data = {
.cs = 0,
.gpio_irq = 26,
-@@ -649,14 +867,37 @@ static void __init n8x0_init_irq(void)
+@@ -649,14 +771,39 @@ static void __init n8x0_init_irq(void)
omap_gpio_init();
}
+#define n8x0_mipid_init() 0
+#define n8x0_blizzard_init() 0
+#endif
++
++extern void n8x0_usb_init(void);
+
static void __init n8x0_init_machine(void)
{
n8x0_onenand_init();
n8x0_mmc_init();
n8x0_usb_init();
-Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0-lcd.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.35/arch/arm/mach-omap2/board-n8x0-lcd.c 2010-08-08 12:56:31.000000000 +0200
+--- /dev/null
++++ linux-2.6.35.3/arch/arm/mach-omap2/board-n8x0-lcd.c
@@ -0,0 +1,127 @@
+/*
+ * linux/arch/arm/mach-omap2/board-n8x0.c
+
+ printk(KERN_INFO "N8x0 Blizzard initialized");
+}
-Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0-usb.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.35/arch/arm/mach-omap2/board-n8x0-usb.c 2010-08-08 12:56:31.000000000 +0200
+--- /dev/null
++++ linux-2.6.35.3/arch/arm/mach-omap2/board-n8x0-usb.c
@@ -0,0 +1,175 @@
+/*
+ * linux/arch/arm/mach-omap2/board-n8x0-usb.c
+err:
+ gpio_free(GPIO_TUSB_ENABLE);
+}
-Index: linux-2.6.35/arch/arm/mach-omap2/control.c
-===================================================================
---- linux-2.6.35.orig/arch/arm/mach-omap2/control.c 2010-08-08 12:56:15.000000000 +0200
-+++ linux-2.6.35/arch/arm/mach-omap2/control.c 2010-08-08 12:56:32.000000000 +0200
+--- linux-2.6.35.3.orig/arch/arm/mach-omap2/control.c
++++ linux-2.6.35.3/arch/arm/mach-omap2/control.c
@@ -162,6 +162,7 @@ u16 omap_ctrl_readw(u16 offset)
return __raw_readw(OMAP_CTRL_REGADDR(offset));
}
void omap_ctrl_writel(u32 val, u16 offset)
{
__raw_writel(val, OMAP_CTRL_REGADDR(offset));
-Index: linux-2.6.35/arch/arm/mach-omap2/Kconfig
-===================================================================
---- linux-2.6.35.orig/arch/arm/mach-omap2/Kconfig 2010-08-08 12:56:15.000000000 +0200
-+++ linux-2.6.35/arch/arm/mach-omap2/Kconfig 2010-08-08 12:56:33.000000000 +0200
+--- linux-2.6.35.3.orig/arch/arm/mach-omap2/Kconfig
++++ linux-2.6.35.3/arch/arm/mach-omap2/Kconfig
@@ -116,6 +116,16 @@ config MACH_NOKIA_N8X0
select MACH_NOKIA_N810
select MACH_NOKIA_N810_WIMAX
config MACH_NOKIA_RX51
bool "Nokia RX-51 board"
depends on ARCH_OMAP3
-Index: linux-2.6.35/arch/arm/mach-omap2/Makefile
-===================================================================
---- linux-2.6.35.orig/arch/arm/mach-omap2/Makefile 2010-08-08 12:56:15.000000000 +0200
-+++ linux-2.6.35/arch/arm/mach-omap2/Makefile 2010-08-08 12:56:33.000000000 +0200
+--- linux-2.6.35.3.orig/arch/arm/mach-omap2/Makefile
++++ linux-2.6.35.3/arch/arm/mach-omap2/Makefile
@@ -116,6 +116,8 @@ obj-$(CONFIG_MACH_OMAP_3430SDP) += boar
hsmmc.o \
board-sdp-flash.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
board-rx51-sdram.o \
board-rx51-peripherals.o \
-Index: linux-2.6.35/arch/arm/mach-omap2/serial.c
-===================================================================
---- linux-2.6.35.orig/arch/arm/mach-omap2/serial.c 2010-08-08 12:56:15.000000000 +0200
-+++ linux-2.6.35/arch/arm/mach-omap2/serial.c 2010-08-08 12:56:34.000000000 +0200
+--- linux-2.6.35.3.orig/arch/arm/mach-omap2/serial.c
++++ linux-2.6.35.3/arch/arm/mach-omap2/serial.c
@@ -495,10 +495,10 @@ static void omap_uart_idle_init(struct o
uart->padconf = 0;
}
projects / openwrt.git / blobdiff