UIMAGE:=$(IMG_PREFIX)-uImage-initramfs
endif
-ifeq ($(CONFIG_RALINK_RT305X),y)
+ifeq ($(CONFIG_RALINK_RT288X),y)
define kernel_entry
--a 0x80000000 -e 0x80000000
+-a 0x88000000 -e 0x88000000
endef
else
define kernel_entry
--a 0x88000000 -e 0x88000000
+-a 0x80000000 -e 0x80000000
endef
endif
define BuildFirmware/Generic
$(call PatchKernelLzma,$(2),$(3) $($(4)))
- if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt $(5) ]; then \
- echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
+ $(call MkImage,lzma,"$(KDIR)/vmlinux-$(2).bin.lzma","$(KDIR)/vmlinux-$(2).uImage")
+ if [ `stat -c%s "$(KDIR)/vmlinux-$(2).uImage"` -gt $(5) ]; then \
+ echo "Warning: $(KDIR)/vmlinux-$(2).uImage is too big"; \
else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(6) ]; then \
echo "Warning: $(KDIR)/root.$(1) is too big"; \
else \
- mkimage -A mips -O linux -T kernel -C lzma \
- $(call kernel_entry) \
- -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
- -d $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/vmlinux-$(2).uImage; \
( \
dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(5) conv=sync; \
dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_8M,851968,7208960)
endef
+mtdlayout_dir300b1=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
+mtd_dir300b1_kernel_part_size=851968
+mtd_dir300b1_rootfs_part_size=3014656
+define Image/Build/Template/DIR300B1
+ $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_dir300b1,$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size))
+ mkwrgimg -s wrgn23_dlwbr_dir300b -d /dev/mtdblock/2 \
+ -i $(call imgname,$(1),$(2))-sysupgrade.bin \
+ -o $(call imgname,$(1),$(2))-factory.bin
+endef
+
define Image/Build/Profile/DIR300B1
- $(call Image/Build/Template/GENERIC_4M,$(1),dir-300-b1,DIR-300-revB)
+ $(call Image/Build/Template/DIR300B1,$(1),dir-300-b1,DIR-300-revB)
endef
define Image/Build/Profile/FONERA20N
$(call Image/Build/Template/GENERIC_8M,$(1),hw550-3g,HW550-3G)
endef
+define Image/Build/Profile/MOFI35003GN
+ $(call Image/Build/Template/GENERIC_8M,$(1),mofi3500-3gn,MOFI3500-3GN)
+endef
-mtdlayout_wcr150gn=mtdparts=physmap-flash.0:192k(Bootloader)ro,64k(Config),64k(Factory),832k(Kernel),2944k(rootfs),3776k@0x50000(firmware)
+mtdlayout_wcr150gn=mtdparts=physmap-flash.0:192k(bootloader)ro,64k(config),64k(factory),832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
mtd_wcr150gn_kernel_part_size=851968
mtd_wcr150gn_rootfs_part_size=3014656
define Image/Build/Template/WCR150GN
$(call Image/Build/Profile/WCR150GN,$(1))
$(call Image/Build/Profile/F5D8235V2,$(1))
$(call Image/Build/Profile/HW5503G,$(1))
+ $(call Image/Build/Profile/MOFI35003GN,$(1))
endef
endif