ar71xx: preset WLAN LED config on MZK-W300NH

[openwrt.git] / target / linux / ar71xx / base-files / etc / defconfig / wndr3700 / network

diff --git a/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network b/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network
index 7916286..69d7dc7 100644 (file)
--- a/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network
+++ b/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network
@@ -5,7 +5,7 @@ config interface loopback
        option netmask  255.0.0.0
 
 config interface lan
-       option ifname   eth0
+       option ifname   eth0.1
        option type     bridge
        option proto    static
        option ipaddr   192.168.1.1
@@ -16,11 +16,54 @@ config interface wan
        option proto    dhcp
 
 config switch
-       option name     rtl8366-smi
+       option name     rtl8366s
        option reset    1
        option enable_vlan 1
+       # Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
+       option blinkrate        2
 
 config switch_vlan
-       option device   rtl8366-smi
-       option vlan     0
-       option ports    "0 1 2 3 5"
+       option device   rtl8366s
+       option vlan     1
+       option ports    "0 1 2 3 5t"
+
+config switch_port
+       # Port 1 controls the GREEN configuration of LEDs for
+       # the switch and the section does not correspond to a real
+       # switch port.
+       #
+       # 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
+       # 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
+       # 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
+       # 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
+       # 14: Link (master); 15: separate register
+
+       option device           rtl8366s
+       option port             1
+       option led              6
+
+config switch_port
+       # Port 2 controls the ORANGE configuration of LEDs for
+       # the switch and the section does not correspond to a real
+       # switch port.
+       #
+       # See the key above for switch port 1 for the meaning of the
+       # 'led' setting below.
+       
+       option device           rtl8366s
+       option port             2
+       option led              9
+
+config switch_port
+       # Port 5 controls the configuration of the WAN LED and the
+       # section does not correspond to a real switch port.
+       #
+       # To toggle the use of green or orange LEDs for the WAN port,
+       # see the LED setting for wndr3700:green:wan in /etc/config/system.
+       #
+       # See the key above for switch port 1 for the meaning of the
+       # 'led' setting below.
+
+       option device           rtl8366s
+       option port             5
+       option led              2