Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to...

[openwrt.git] / target / linux / ixp4xx / image / Makefile

diff --git a/target/linux/ixp4xx/image/Makefile b/target/linux/ixp4xx/image/Makefile
index b1c715a..7a69998 100644 (file)
--- a/target/linux/ixp4xx/image/Makefile
+++ b/target/linux/ixp4xx/image/Makefile
@@ -1,5 +1,5 @@
 # 
 # 

-# Copyright (C) 2006 OpenWrt.org
+# Copyright (C) 2006-2010 OpenWrt.org

 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.


@@ -12,12 +12,12 @@ ifdef CONFIG_PACKAGE_apex
        BIN_DIR=$(BIN_DIR) $(TOPDIR)/scripts/slugimage.pl \
                -L $(BIN_DIR)/apex/apex-$(2)-armeb.bin \
                -k $(BIN_DIR)/openwrt-$(2)-zImage \
        BIN_DIR=$(BIN_DIR) $(TOPDIR)/scripts/slugimage.pl \
                -L $(BIN_DIR)/apex/apex-$(2)-armeb.bin \
                -k $(BIN_DIR)/openwrt-$(2)-zImage \

-               -r rootfs:$(BIN_DIR)/openwrt-$(BOARD)-$(1).img \
+               -r rootfs:$(BIN_DIR)/$(IMG_PREFIX)-$(1).img \

                -p -o $(BIN_DIR)/openwrt-$(2)-$(1).bin
        BIN_DIR=$(BIN_DIR) $(TOPDIR)/scripts/slugimage.pl \
                -F -L $(BIN_DIR)/apex/apex-$(2)-16mb-armeb.bin \
                -k $(BIN_DIR)/openwrt-$(2)-zImage \
                -p -o $(BIN_DIR)/openwrt-$(2)-$(1).bin
        BIN_DIR=$(BIN_DIR) $(TOPDIR)/scripts/slugimage.pl \
                -F -L $(BIN_DIR)/apex/apex-$(2)-16mb-armeb.bin \
                -k $(BIN_DIR)/openwrt-$(2)-zImage \

-               -r rootfs:$(BIN_DIR)/openwrt-$(BOARD)-$(1).img \
+               -r rootfs:$(BIN_DIR)/$(IMG_PREFIX)-$(1).img \

                -p -o $(BIN_DIR)/openwrt-$(2)-$(1)-16mb.bin
   endef
 endif
                -p -o $(BIN_DIR)/openwrt-$(2)-$(1)-16mb.bin
   endef
 endif


@@ -26,8 +26,6 @@ define Image/Build/Freecom
        $(INSTALL_DIR) $(TARGET_DIR)/boot
        # TODO: Add special CMDLINE shim for webupgrade image here
        $(CP) $(BIN_DIR)/openwrt-$(2)-zImage $(TARGET_DIR)/zImage
        $(INSTALL_DIR) $(TARGET_DIR)/boot
        # TODO: Add special CMDLINE shim for webupgrade image here
        $(CP) $(BIN_DIR)/openwrt-$(2)-zImage $(TARGET_DIR)/zImage

-       rm -rf $(TARGET_DIR)/{var,jffs,rom}
-       $(INSTALL_DIR) $(TARGET_DIR)/var

        $(TAR) cfj $(BIN_DIR)/openwrt-$(2)-$(1).img --numeric-owner --owner=0 --group=0 -C $(TARGET_DIR)/ .
        $(STAGING_DIR_HOST)/bin/encode_crc $(BIN_DIR)/openwrt-$(2)-$(1).img $(BIN_DIR)/openwrt-$(2)-$(1)-webupgrade.img
        rm -f $(TARGET_DIR)/zImage
        $(TAR) cfj $(BIN_DIR)/openwrt-$(2)-$(1).img --numeric-owner --owner=0 --group=0 -C $(TARGET_DIR)/ .
        $(STAGING_DIR_HOST)/bin/encode_crc $(BIN_DIR)/openwrt-$(2)-$(1).img $(BIN_DIR)/openwrt-$(2)-$(1)-webupgrade.img
        rm -f $(TARGET_DIR)/zImage


@@ -38,8 +36,8 @@ define Image/Prepare
 endef
 
 define Image/BuildKernel
 endef
 
 define Image/BuildKernel

-       cp $(KDIR)/zImage $(BIN_DIR)/openwrt-$(BOARD)-zImage
-       BIN_DIR=$(BIN_DIR) $(TOPDIR)/scripts/arm-magic.sh
+       cp $(KDIR)/zImage $(BIN_DIR)/$(IMG_PREFIX)-zImage
+       BIN_DIR=$(BIN_DIR) IMG_PREFIX="$(IMG_PREFIX)" $(TOPDIR)/scripts/arm-magic.sh

 endef
 
 define Image/Build
 endef
 
 define Image/Build


@@ -47,18 +45,18 @@ define Image/Build
 endef
 
 define Image/Build/jffs2-64k
 endef
 
 define Image/Build/jffs2-64k

-       dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-$(1).img bs=65536 conv=sync
+       dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-$(1).img bs=65536 conv=sync

 endef
 
 define Image/Build/jffs2-128k
 endef
 
 define Image/Build/jffs2-128k

-       dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-$(1).img bs=131072 conv=sync
-       $(call Image/Build/Linksys,$(1))
+       dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-$(1).img bs=131072 conv=sync
+       $(call Image/Build/Linksys,$(1),nslu2,$(1))

        $(call Image/Build/Freecom,$(1),fsg3,$(1))
 endef
 
 define Image/Build/squashfs
        $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
        $(call Image/Build/Freecom,$(1),fsg3,$(1))
 endef
 
 define Image/Build/squashfs
        $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)

-       dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-$(1).img bs=131072 conv=sync
+       dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-$(1).img bs=131072 conv=sync

        $(call Image/Build/Linksys,$(1),nslu2,$(1))
        $(call Image/Build/Freecom,$(1),fsg3,$(1))
 endef
        $(call Image/Build/Linksys,$(1),nslu2,$(1))
        $(call Image/Build/Freecom,$(1),fsg3,$(1))
 endef