upgrade the ixp4xx ethernet driver to v0.3.1, split the Gateway 7001 support to two...

[openwrt.git] / package / hostap / Makefile

diff --git a/package/hostap/Makefile b/package/hostap/Makefile
index 90281fe..15b4aec 100644 (file)
--- a/package/hostap/Makefile
+++ b/package/hostap/Makefile
@@ -12,52 +12,105 @@ include $(INCLUDE_DIR)/kernel.mk
 PKG_NAME:=hostap-driver
 PKG_VERSION:=0.4.9
 PKG_RELEASE:=1
 PKG_NAME:=hostap-driver
 PKG_VERSION:=0.4.9
 PKG_RELEASE:=1

-PKG_MD5SUM:=c7534dc040ab90218257a78488ecd378

 
 

-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_URL:=http://hostap.epitest.fi/releases/

 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz

+PKG_SOURCE_URL:=http://hostap.epitest.fi/releases/
+PKG_MD5SUM:=c7534dc040ab90218257a78488ecd378

 PKG_CAT:=zcat
 
 PKG_CAT:=zcat
 

+PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)

 PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
 
 include $(INCLUDE_DIR)/package.mk
 PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
 
 include $(INCLUDE_DIR)/package.mk

+ifeq ($(DUMP),)
+  -include $(LINUX_DIR)/.config
+endif

 
 

-define Package/kmod-hostap
-  SECTION:=drivers
-  CATEGORY:=Drivers
-  DEPENDS:=@PCI_SUPPORT||PCMCIA_SUPPORT
-  TITLE:=Host AP support for Prism2/2.5/3 IEEE 802.11b
-  DESCRIPTION:=Host AP support for Prism2/2.5/3 IEEE 802.11b \\\
-    A driver for 802.11b wireless cards based on Intersil Prism2/2.5/3 \\\
-    chipset. This driver supports so called Host AP mode that allows the card \\\
-    to act as an IEEE 802.11 access point. \\\
-    \\\
-    This option includes the base Host AP driver code that is shared by \\\
-    different hardware models. You will also need to enable support for \\\
-    PLX/PCI/CS version of the driver to actually use the driver. \\\
+define KernelPackage/hostap/Default/2.4
+  VERSION:=$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE)
+endef
+define KernelPackage/hostap/Default/2.6
+  VERSION:=$(LINUX_VERSION)-$(BOARD)-$(PKG_RELEASE)
+endef
+define KernelPackage/hostap/Default
+  SUBMENU:=Wireless Drivers
+  DESCRIPTION:=\
+       Host AP is a driver for 802.11b wireless cards based on Intersil \\\
+       Prism2/2.5/3 chipset. It supports so called Host AP mode that allows the \\\
+       card to act as an IEEE 802.11 access point.

   URL:=http://hostap.epitest.fi/
   URL:=http://hostap.epitest.fi/

-  ifeq ($(KERNEL),2.6)
-    VERSION:=$(LINUX_VERSION)-$(BOARD)-$(PKG_RELEASE)
-  else
-    VERSION:=$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE)
-  endif
+  $(call KernelPackage/hostap/Default/$(KERNEL))
+endef
+
+
+define KernelPackage/hostap
+  $(call KernelPackage/hostap/Default)
+  DEPENDS:=@PCI_SUPPORT||PCMCIA_SUPPORT +kmod-ieee80211 +kmod-crypto
+  TITLE:=Host AP support for Prism2/2.5/3
+  DESCRIPTION+=\\\
+       \\\
+       This package contains the base Host AP driver code that is shared by \\\
+       different hardware models. You will also need to enable support for \\\
+       PLX/PCI/CS version of the driver to actually use the driver.
+endef
+define KernelPackage/hostap/2.4
+  DEPENDS:=+kmod-crypto
+  FILES:= \
+       $(PKG_BUILD_DIR)/driver/modules/hostap.$(LINUX_KMOD_SUFFIX) \
+       $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_ccmp.$(LINUX_KMOD_SUFFIX) \
+       $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_tkip.$(LINUX_KMOD_SUFFIX) \
+       $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_wep.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,60,hostap hostap_crypt_wep hostap_crypt_tkip hostap_crypt_ccmp)
+endef
+define KernelPackage/hostap/2.6
+  KCONFIG:=$(CONFIG_HOSTAP)
+  FILES:= \
+       $(MODULES_DIR)/kernel/drivers/net/wireless/hostap/hostap.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,60,hostap)

 endef
 
 endef
 

-define Package/kmod-hostap-pci
-$(call Package/kmod-hostap)
-DEPENDS:=kmod-hostap
-TITLE:=Host AP driver for Prism2.5 PCI adaptors
-DESCRIPTION:=Host AP driver for Prism2.5 PCI adaptors
+
+define KernelPackage/hostap-pci
+  $(call KernelPackage/hostap/Default)
+  DEPENDS:=kmod-hostap
+  TITLE:=Host AP driver for PCI adaptors
+  DESCRIPTION+=\\\
+       \\\
+       This package contains the Host AP driver for Prism2.5 PCI adaptors.
+  AUTOLOAD:=$(call AutoLoad,60,hostap_pci)
+endef
+define KernelPackage/hostap-pci/2.4
+  FILES:= \
+       $(PKG_BUILD_DIR)/driver/modules/hostap_pci.$(LINUX_KMOD_SUFFIX)

 endef
 endef

+define KernelPackage/hostap-pci/2.6
+  KCONFIG:=$(CONFIG_HOSTAP_PCI)
+  FILES:= \
+       $(MODULES_DIR)/kernel/drivers/net/wireless/hostap/hostap_pci.$(LINUX_KMOD_SUFFIX)
+endef
+

 
 

-define Package/kmod-hostap-plx
-$(call Package/kmod-hostap)
-DEPENDS:=kmod-hostap
-TITLE:=Host AP driver for Prism2/2.5/3 in PLX9052 based PCI adaptors
-DESCRIPTION:=Host AP driver for Prism2/2.5/3 in PLX9052 based PCI adaptors
+define KernelPackage/hostap-plx
+  $(call KernelPackage/hostap/Default)
+  DEPENDS:=kmod-hostap
+  TITLE:=Host AP driver for PLX9052 based PCI adaptors
+  DESCRIPTION+=\\\
+       \\\
+       This package contains the Host AP driver for Prism2/2.5/3 in PLX9052 \\\
+       based PCI adaptors.
+  AUTOLOAD:=$(call AutoLoad,60,hostap_plx)
+endef
+define KernelPackage/hostap-plx/2.4
+  FILES:= \
+       $(PKG_BUILD_DIR)/driver/modules/hostap_plx.$(LINUX_KMOD_SUFFIX)
+endef
+define KernelPackage/hostap-plx/2.6
+  KCONFIG:=$(CONFIG_HOSTAP_PLX)
+  FILES:= \
+       $(MODULES_DIR)/kernel/drivers/net/wireless/hostap/hostap_plx.$(LINUX_KMOD_SUFFIX)

 endef
 
 endef
 

+

 ifeq ($(KERNEL),2.4)
   define Build/Compile
        $(MAKE) -C $(LINUX_DIR)/ \
 ifeq ($(KERNEL),2.4)
   define Build/Compile
        $(MAKE) -C $(LINUX_DIR)/ \


@@ -66,64 +119,19 @@ ifeq ($(KERNEL),2.4)
                SUBDIRS="$(PKG_BUILD_DIR)/driver/modules" \
                modules
   endef
                SUBDIRS="$(PKG_BUILD_DIR)/driver/modules" \
                modules
   endef

-
-  define Package/kmod-hostap/install
-       install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION)
-       $(CP) \
-               $(PKG_BUILD_DIR)/driver/modules/hostap.$(LINUX_KMOD_SUFFIX) \
-               $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_ccmp.$(LINUX_KMOD_SUFFIX) \
-               $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_tkip.$(LINUX_KMOD_SUFFIX) \
-               $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_wep.$(LINUX_KMOD_SUFFIX) \
-               $(1)/lib/modules/$(LINUX_VERSION)/
-  endef
-
-  define Package/kmod-hostap-pci/install
-       install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION)
-       $(CP) \
-               $(PKG_BUILD_DIR)/driver/modules/hostap_pci.$(LINUX_KMOD_SUFFIX) \
-               $(1)/lib/modules/$(LINUX_VERSION)/
-  endef
-
-  define Package/kmod-hostap-plx/install
-       install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION)
-       $(CP) \
-               $(PKG_BUILD_DIR)/driver/modules/hostap_plx.$(LINUX_KMOD_SUFFIX) \
-               $(1)/lib/modules/$(LINUX_VERSION)/
-  endef
-endif
-
-ifeq ($(KERNEL),2.6)
-  define Build/Compile
+else
+  define Build/Prepare
+       mkdir -p $(PKG_BUILD_DIR)

   endef
   
   endef
   

-ifeq ($(CONFIG_HOSTAP),m)
-  define Package/kmod-hostap/install
-       install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION)
-       $(CP) \
-               $(MODULES_DIR)/kernel/drivers/net/wireless/hostap/hostap.$(LINUX_KMOD_SUFFIX) \
-               $(1)/lib/modules/$(LINUX_VERSION)/
+  define Build/Configure

   endef
   endef

-endif
-
-ifeq ($(CONFIG_HOSTAP_PCI),m)
-  define Package/kmod-hostap-pci/install
-       install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION)
-       $(CP) \
-               $(MODULES_DIR)/kernel/drivers/net/wireless/hostap/hostap_pci.$(LINUX_KMOD_SUFFIX) \
-               $(1)/lib/modules/$(LINUX_VERSION)/
+  
+  define Build/Compile

   endef
 endif
 
   endef
 endif
 

-ifeq ($(CONFIG_HOSTAP_PLX),m)
-  define Package/kmod-hostap-plx/install
-       install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION)
-       $(CP) \
-               $(MODULES_DIR)/kernel/drivers/net/wireless/hostap/hostap_plx.$(LINUX_KMOD_SUFFIX) \
-               $(1)/lib/modules/$(LINUX_VERSION)/
-  endef
-endif
-endif

 
 

-$(eval $(call BuildPackage,kmod-hostap))
-$(eval $(call BuildPackage,kmod-hostap-pci))
-$(eval $(call BuildPackage,kmod-hostap-plx))
+$(eval $(call KernelPackage,hostap))
+$(eval $(call KernelPackage,hostap-pci))
+$(eval $(call KernelPackage,hostap-plx))