-config B43
- tristate "Broadcom 43xx wireless support (mac80211 stack)"
- depends on SSB_POSSIBLE && MAC80211 && WLAN_80211
- select SSB
- select FW_LOADER
- select HW_RANDOM
- ---help---
- b43 is a driver for the Broadcom 43xx series wireless devices.
-
- Check "lspci" for something like
- "Broadcom Corporation BCM43XX 802.11 Wireless LAN Controller"
- to determine whether you own such a device.
-
- This driver supports the new BCM43xx IEEE 802.11G devices, but not
- the old IEEE 802.11B devices. Old devices are supported by
- the b43legacy driver.
- Note that this has nothing to do with the standard that your AccessPoint
- supports (A, B, G or a combination).
- IEEE 802.11G devices can talk to IEEE 802.11B AccessPoints.
-
- It is safe to include both b43 and b43legacy as the underlying glue
- layer will automatically load the correct version for your device.
-
- This driver uses V4 firmware, which must be installed separately using
- b43-fwcutter.
-
- This driver can be built as a module (recommended) that will be called "b43".
- If unsure, say M.
-
-# Auto-select SSB PCI-HOST support, if possible
-config B43_PCI_AUTOSELECT
- bool
- depends on B43 && SSB_PCIHOST_POSSIBLE
- select SSB_PCIHOST
- default y
-
-# Auto-select SSB PCICORE driver, if possible
-config B43_PCICORE_AUTOSELECT
- bool
- depends on B43 && SSB_DRIVER_PCICORE_POSSIBLE
- select SSB_DRIVER_PCICORE
- default y
-
-config B43_PCMCIA
- bool "Broadcom 43xx PCMCIA device support (EXPERIMENTAL)"
- depends on B43 && SSB_PCMCIAHOST_POSSIBLE && EXPERIMENTAL
- select SSB_PCMCIAHOST
- ---help---
- Broadcom 43xx PCMCIA device support.
-
- Support for 16bit PCMCIA devices.
- Please note that most PC-CARD devices are _NOT_ 16bit PCMCIA
- devices, but 32bit CardBUS devices. CardBUS devices are supported
- out of the box by b43.
-
- With this config option you can drive b43 cards in
- CompactFlash formfactor in a PCMCIA adaptor.
- CF b43 cards can sometimes be found in handheld PCs.
-
- It's safe to select Y here, even if you don't have a B43 PCMCIA device.
-
- If unsure, say N.
-
-# LED support
-config B43_LEDS
- bool
- depends on B43 && MAC80211_LEDS
- default y
-
-# RFKILL support
-config B43_RFKILL
- bool
- depends on B43 && RFKILL && RFKILL_INPUT && INPUT_POLLDEV
- default y
-
-config B43_DEBUG
- bool "Broadcom 43xx debugging"
- depends on B43
- ---help---
- Broadcom 43xx debugging messages.
-
- Say Y, if you want to find out why the driver does not
- work for you.
-
-config B43_DMA
- bool
- depends on B43
-config B43_PIO
- bool
- depends on B43
-
-choice
- prompt "Broadcom 43xx data transfer mode"
- depends on B43
- default B43_DMA_AND_PIO_MODE
-
-config B43_DMA_AND_PIO_MODE
- bool "DMA + PIO"
- select B43_DMA
- select B43_PIO
- ---help---
- Include both, Direct Memory Access (DMA) and Programmed I/O (PIO)
- data transfer modes.
- The actually used mode is selectable through the module
- parameter "pio". If the module parameter is pio=0, DMA is used.
- Otherwise PIO is used. DMA is default.
-
- If unsure, choose this option.
-
-config B43_DMA_MODE
- bool "DMA (Direct Memory Access) only"
- select B43_DMA
- ---help---
- Only include Direct Memory Access (DMA).
- This reduces the size of the driver module, by omitting the PIO code.
-
-config B43_PIO_MODE
- bool "PIO (Programmed I/O) only"
- select B43_PIO
- ---help---
- Only include Programmed I/O (PIO).
- This reduces the size of the driver module, by omitting the DMA code.
- Please note that PIO transfers are slow (compared to DMA).
-
- Also note that not all devices of the 43xx series support PIO.
- The 4306 (Apple Airport Extreme and others) supports PIO, while
- the 4318 is known to _not_ support PIO.
-
- Only use PIO, if DMA does not work for you.
-
-endchoice
projects / openwrt.git / blobdiff