BLOCK_MENU:=Block Devices
+define KernelPackage/aoe
+ SUBMENU:=$(BLOCK_MENU)
+ TITLE:=ATA over Ethernet support
+ KCONFIG:=CONFIG_ATA_OVER_ETH
+ FILES:=$(LINUX_DIR)/drivers/block/aoe/aoe.ko
+ AUTOLOAD:=$(call AutoLoad,30,aoe)
+endef
+
+define KernelPackage/aoe/description
+ Kernel support for ATA over Ethernet
+endef
+
+$(eval $(call KernelPackage,aoe))
+
+
define KernelPackage/ata-core
SUBMENU:=$(BLOCK_MENU)
TITLE:=Serial and Parallel ATA support
- DEPENDS:=@PCI_SUPPORT @LINUX_2_6 +kmod-scsi-core @(!TARGET_ubicom32||!TARGET_etrax||!TARGET_x86)
+ DEPENDS:=@PCI_SUPPORT +kmod-scsi-core @(!TARGET_ubicom32||!TARGET_etrax||!TARGET_x86)
KCONFIG:=CONFIG_ATA
- FILES:=$(LINUX_DIR)/drivers/ata/libata.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/ata/libata.ko
AUTOLOAD:=$(call AutoLoad,21,libata,1)
endef
define KernelPackage/ata-ahci
-$(call AddDepends/ata)
TITLE:=AHCI Serial ATA support
KCONFIG:=CONFIG_SATA_AHCI
- FILES:=$(LINUX_DIR)/drivers/ata/ahci.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,41,ahci,1)
+ FILES:=$(LINUX_DIR)/drivers/ata/ahci.ko
+ ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.35)),1)
+ FILES += $(LINUX_DIR)/drivers/ata/libahci.ko
+ AUTOLOAD:=$(call AutoLoad,41,libahci ahci,1)
+ else
+ AUTOLOAD:=$(call AutoLoad,41,ahci,1)
+ endif
+ $(call AddDepends/ata)
endef
define KernelPackage/ata-ahci/description
$(eval $(call KernelPackage,ata-ahci))
+
+define KernelPackage/ata-artop
+ TITLE:=ARTOP 6210/6260 PATA support
+ KCONFIG:=CONFIG_PATA_ARTOP
+ FILES:=$(LINUX_DIR)/drivers/ata/pata_artop.ko
+ AUTOLOAD:=$(call AutoLoad,41,pata_artop,1)
+ $(call AddDepends/ata)
+endef
+
+define KernelPackage/ata-artop/description
+ PATA support for ARTOP 6210/6260 host controllers.
+endef
+
+$(eval $(call KernelPackage,ata-artop))
+
+
+define KernelPackage/ata-nvidia-sata
+ TITLE:=Nvidia Serial ATA support
+ KCONFIG:=CONFIG_SATA_NV
+ FILES:=$(LINUX_DIR)/drivers/ata/sata_nv.ko
+ AUTOLOAD:=$(call AutoLoad,41,sata_nv,1)
+ $(call AddDepends/ata)
+endef
+
+$(eval $(call KernelPackage,ata-nvidia-sata))
+
+
+define KernelPackage/ata-pdc202xx-old
+ SUBMENU:=$(BLOCK_MENU)
+ TITLE:=Older Promise PATA controller support
+ DEPENDS:=kmod-ata-core
+ KCONFIG:= \
+ CONFIG_ATA_SFF=y \
+ CONFIG_PATA_PDC_OLD
+ FILES:=$(LINUX_DIR)/drivers/ata/pata_pdc202xx_old.ko
+ AUTOLOAD:=$(call AutoLoad,41,pata_pdc202xx_old,1)
+endef
+
+define KernelPackage/ata-pdc202xx-old/description
+ This option enables support for the Promise 20246, 20262, 20263,
+ 20265 and 20267 adapters.
+endef
+
+$(eval $(call KernelPackage,ata-pdc202xx-old))
+
+
+define KernelPackage/ata-piix
+ TITLE:=Intel PIIX PATA/SATA support
+ KCONFIG:=CONFIG_ATA_PIIX
+ FILES:=$(LINUX_DIR)/drivers/ata/ata_piix.ko
+ AUTOLOAD:=$(call AutoLoad,41,ata_piix,1)
+ $(call AddDepends/ata)
+endef
+
+define KernelPackage/ata-piix/description
+ SATA support for Intel ICH5/6/7/8 series host controllers and
+ PATA support for Intel ESB/ICH/PIIX3/PIIX4 series host controllers.
+endef
+
+$(eval $(call KernelPackage,ata-piix))
+
+
define KernelPackage/ata-sil
-$(call AddDepends/ata,)
TITLE:=Silicon Image SATA support
KCONFIG:=CONFIG_SATA_SIL
- FILES:=$(LINUX_DIR)/drivers/ata/sata_sil.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/ata/sata_sil.ko
AUTOLOAD:=$(call AutoLoad,41,sata_sil,1)
+ $(call AddDepends/ata)
endef
define KernelPackage/ata-sil/description
define KernelPackage/ata-sil24
-$(call AddDepends/ata,)
TITLE:=Silicon Image 3124/3132 SATA support
KCONFIG:=CONFIG_SATA_SIL24
- FILES:=$(LINUX_DIR)/drivers/ata/sata_sil24.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/ata/sata_sil24.ko
AUTOLOAD:=$(call AutoLoad,41,sata_sil24,1)
+ $(call AddDepends/ata)
endef
define KernelPackage/ata-sil24/description
$(eval $(call KernelPackage,ata-sil24))
-define KernelPackage/ata-artop
-$(call AddDepends/ata,)
- TITLE:=ARTOP 6210/6260 PATA support
- KCONFIG:=CONFIG_PATA_ARTOP
- FILES:=$(LINUX_DIR)/drivers/ata/pata_artop.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,41,pata_artop,1)
+define KernelPackage/ata-via-sata
+ TITLE:=VIA SATA support
+ KCONFIG:=CONFIG_SATA_VIA
+ FILES:=$(LINUX_DIR)/drivers/ata/sata_via.ko
+ AUTOLOAD:=$(call AutoLoad,41,sata_via,1)
+ $(call AddDepends/ata)
endef
-define KernelPackage/ata-artop/description
- PATA support for ARTOP 6210/6260 host controllers.
+define KernelPackage/ata-via-sata/description
+ This option enables support for VIA Serial ATA.
endef
-$(eval $(call KernelPackage,ata-artop))
+$(eval $(call KernelPackage,ata-via-sata))
-define KernelPackage/ata-octeon-cf
-$(call AddDepends/ata,@TARGET_octeon)
- TITLE:=Octeon Compact Flash support
- KCONFIG:=CONFIG_PATA_OCTEON_CF
- FILES:=$(LINUX_DIR)/drivers/ata/pata_octeon_cf.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,41,pata_octeon_cf,1)
-endef
-define KernelPackage/ata-octeon-cf/description
- Octeon Compact Flash support.
+define KernelPackage/block2mtd
+ SUBMENU:=$(BLOCK_MENU)
+ TITLE:=Block device MTD emulation
+ KCONFIG:=CONFIG_MTD_BLOCK2MTD
+ FILES:=$(LINUX_DIR)/drivers/mtd/devices/block2mtd.ko
endef
-$(eval $(call KernelPackage,ata-octeon-cf))
+$(eval $(call KernelPackage,block2mtd))
-define KernelPackage/ata-ixp4xx-cf
-$(call AddDepends/ata,@TARGET_ixp4xx)
- TITLE:=IXP4XX Compact Flash support
- KCONFIG:=CONFIG_PATA_IXP4XX_CF
- FILES:=$(LINUX_DIR)/drivers/ata/pata_ixp4xx_cf.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,41,pata_ixp4xx_cf,1)
+define KernelPackage/dm
+ SUBMENU:=$(BLOCK_MENU)
+ TITLE:=Device Mapper
+ # All the "=n" are unnecessary, they're only there
+ # to stop the config from asking the question.
+ # MIRROR is M because I've needed it for pvmove.
+ KCONFIG:= \
+ CONFIG_BLK_DEV_MD=n \
+ CONFIG_DM_DEBUG=n \
+ CONFIG_DM_UEVENT=n \
+ CONFIG_DM_DELAY=n \
+ CONFIG_DM_MULTIPATH=n \
+ CONFIG_DM_ZERO=n \
+ CONFIG_DM_SNAPSHOT=n \
+ CONFIG_DM_LOG_USERSPACE=n \
+ CONFIG_MD=y \
+ CONFIG_BLK_DEV_DM \
+ CONFIG_DM_CRYPT \
+ CONFIG_DM_MIRROR
+ FILES:=$(LINUX_DIR)/drivers/md/dm-*.ko
+ AUTOLOAD:=$(call AutoLoad,30,dm-mod dm-log dm-region-hash dm-mirror dm-crypt)
endef
-define KernelPackage/ata-ixp4xx-cf/description
- IXP4XX Compact Flash support.
+define KernelPackage/dm/description
+ Kernel module necessary for LVM2 support
endef
-$(eval $(call KernelPackage,ata-ixp4xx-cf))
+$(eval $(call KernelPackage,dm))
+
-define KernelPackage/ata-rb532-cf
-$(call AddDepends/ata,@TARGET_rb532 @BROKEN)
- TITLE:=RB532 Compact Flash support
+define KernelPackage/md-mod
+ SUBMENU:=$(BLOCK_MENU)
+ TITLE:=MD RAID
KCONFIG:= \
- CONFIG_PATA_PLATFORM \
- CONFIG_PATA_RB532
- FILES:=\
- $(LINUX_DIR)/drivers/ata/pata_platform.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/ata/pata_rb532_cf.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,41,pata_platform pata_rb532_cf,1)
+ CONFIG_MD=y \
+ CONFIG_BLK_DEV_MD=m \
+ CONFIG_MD_AUTODETECT=y \
+ CONFIG_MD_FAULTY=n
+ FILES:=$(LINUX_DIR)/drivers/md/md-mod.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,27,md-mod)
endef
-define KernelPackage/ata-rb532-cf/description
- RB532 Compact Flash support.
+define KernelPackage/md-mod/description
+ Kernel RAID md module (md-mod.ko).
+ You will need to select at least one RAID level module below.
endef
-$(eval $(call KernelPackage,ata-rb532-cf))
+$(eval $(call KernelPackage,md-mod))
-define KernelPackage/ata-nvidia-sata
-$(call AddDepends/ata,)
- TITLE:=Nvidia Serial ATA support
- KCONFIG:=CONFIG_SATA_NV
- FILES:=$(LINUX_DIR)/drivers/ata/sata_nv.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,41,sata_nv,1)
+
+define KernelPackage/md/Depends
+ SUBMENU:=$(BLOCK_MENU)
+ DEPENDS:=kmod-md-mod $(1)
endef
-$(eval $(call KernelPackage,ata-nvidia-sata))
+define KernelPackage/md-linear
+$(call KernelPackage/md/Depends,)
+ TITLE:=RAID Linear Module
+ KCONFIG:=CONFIG_MD_LINEAR=m
+ FILES:=$(LINUX_DIR)/drivers/md/linear.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,28,linear)
+endef
+
+define KernelPackage/md-linear/description
+ RAID "Linear" or "Append" driver module (linear.ko)
+endef
+
+$(eval $(call KernelPackage,md-linear))
-define KernelPackage/ata-magicbox-cf
-$(call AddDepends/ata,@TARGET_ppc40x)
- TITLE:=Magicbox v2/OpenRB Compact flash support
- KCONFIG:=CONFIG_PATA_MAGICBOX_CF
- FILES:=$(LINUX_DIR)/drivers/ata/pata_magicbox_cf.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,41,pata_magicbox_cf,1)
+
+define KernelPackage/md-raid0
+$(call KernelPackage/md/Depends,)
+ TITLE:=RAID0 Module
+ KCONFIG:=CONFIG_MD_RAID0=m
+ FILES:=$(LINUX_DIR)/drivers/md/raid0.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,28,raid0)
endef
-define KernelPackage/ata-magicbox-cf/description
- Support for Magicbox v2/OpenRB on-board CF slot.
+define KernelPackage/md-raid0/description
+ RAID Level 0 (Striping) driver module (raid0.ko)
endef
-$(eval $(call KernelPackage,ata-magicbox-cf))
+$(eval $(call KernelPackage,md-raid0))
-define KernelPackage/ata-pdc202xx-old
- SUBMENU:=$(BLOCK_MENU)
- TITLE:=Older Promise PATA controller support
- DEPENDS:=kmod-ata-core
- KCONFIG:= \
- CONFIG_ATA_SFF=y \
- CONFIG_PATA_PDC_OLD
- FILES:=$(LINUX_DIR)/drivers/ata/pata_pdc202xx_old.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,41,pata_pdc202xx_old,1)
+define KernelPackage/md-raid1
+$(call KernelPackage/md/Depends,)
+ TITLE:=RAID1 Module
+ KCONFIG:=CONFIG_MD_RAID1=m
+ FILES:=$(LINUX_DIR)/drivers/md/raid1.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,28,raid1)
endef
-define KernelPackage/ata-pdc202xx-old/description
- This option enables support for the Promise 20246, 20262, 20263,
- 20265 and 20267 adapters.
+define KernelPackage/md-raid1/description
+ RAID Level 1 (Mirroring) driver (raid1.ko)
endef
-$(eval $(call KernelPackage,ata-pdc202xx-old))
+$(eval $(call KernelPackage,md-raid1))
-define KernelPackage/ata-piix
-$(call AddDepends/ata,)
- TITLE:=Intel PIIX PATA/SATA support
- KCONFIG:=CONFIG_ATA_PIIX
- FILES:=$(LINUX_DIR)/drivers/ata/ata_piix.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,41,ata_piix,1)
+define KernelPackage/md-raid10
+$(call KernelPackage/md/Depends,)
+ TITLE:=RAID10 Module
+ KCONFIG:=CONFIG_MD_RAID10=m
+ FILES:=$(LINUX_DIR)/drivers/md/raid10.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,28,raid10)
endef
-define KernelPackage/ata-piix/description
- SATA support for Intel ICH5/6/7/8 series host controllers and
- PATA support for Intel ESB/ICH/PIIX3/PIIX4 series host controllers.
+define KernelPackage/md-raid10/description
+ RAID Level 10 (Mirroring+Striping) driver module (raid10.ko)
endef
-$(eval $(call KernelPackage,ata-piix))
+$(eval $(call KernelPackage,md-raid10))
-define KernelPackage/ata-via-sata
-$(call AddDepends/ata,)
- TITLE:=VIA SATA support
- KCONFIG:=CONFIG_SATA_VIA
- FILES:=$(LINUX_DIR)/drivers/ata/sata_via.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,41,sata_via,1)
+define KernelPackage/md-raid456
+$(call KernelPackage/md/Depends,)
+ TITLE:=RAID Level 456 Driver
+ KCONFIG:= \
+ CONFIG_XOR_BLOCKS=m \
+ CONFIG_ASYNC_CORE=m \
+ CONFIG_ASYNC_MEMCPY=m \
+ CONFIG_ASYNC_XOR=m \
+ CONFIG_ASYNC_PQ=m \
+ CONFIG_ASYNC_RAID6_RECOV=m \
+ CONFIG_ASYNC_RAID6_TEST=n \
+ CONFIG_MD_RAID6_PQ=m \
+ CONFIG_MD_RAID456=m \
+ CONFIG_MULTICORE_RAID456=n
+ FILES:= \
+ $(LINUX_DIR)/crypto/xor.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/crypto/async_tx/async_tx.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/crypto/async_tx/async_memcpy.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/crypto/async_tx/async_xor.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/crypto/async_tx/async_pq.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/crypto/async_tx/async_raid6_recov.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/drivers/md/raid456.$(LINUX_KMOD_SUFFIX)
+ # Additional files with kernel-dependent locations or presence
+ # For Linux >= 2.6.36
+ ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.36)), 1)
+ FILES+= \
+ $(LINUX_DIR)/lib/raid6/raid6_pq.$(LINUX_KMOD_SUFFIX)
+ # For Linux < 2.6.36
+ else
+ FILES+= \
+ $(LINUX_DIR)/drivers/md/raid6_pq.$(LINUX_KMOD_SUFFIX)
+ endif
+ AUTOLOAD:=$(call AutoLoad,28, xor async_tx async_memcpy async_xor raid6_pq async_pq async_raid6_recov raid456)
endef
-define KernelPackage/ata-via-sata/description
- This option enables support for VIA Serial ATA.
+define KernelPackage/md-raid456/description
+ RAID Level 4,5,6 kernel module (raid456.ko)
+
+ Includes the following modules required by
+ raid456.ko:
+ xor.ko
+ async_tx.ko
+ async_xor.ko
+ async_memcpy.ko
+ async_pq.ko
+ async_raid5_recov.ko
+ raid6_pq.ko
endef
-$(eval $(call KernelPackage,ata-via-sata))
+$(eval $(call KernelPackage,md-raid456))
+
+
+define KernelPackage/md-multipath
+$(call KernelPackage/md/Depends,)
+ TITLE:=MD Multipath Module
+ KCONFIG:=CONFIG_MD_MULTIPATH=m
+ FILES:=$(LINUX_DIR)/drivers/md/multipath.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,29,multipath)
+endef
+
+define KernelPackage/md-multipath/description
+ Multipath driver module (multipath.ko)
+endef
+
+$(eval $(call KernelPackage,md-multipath))
define KernelPackage/ide-core
CONFIG_IDE_GD \
CONFIG_IDE_GD_ATA=y \
CONFIG_IDE_GD_ATAPI=n \
+ CONFIG_IDEPCI_PCIBUS_ORDER=y \
CONFIG_BLK_DEV_IDEDMA_PCI=y \
CONFIG_BLK_DEV_IDEPCI=y
FILES:= \
- $(LINUX_DIR)/drivers/ide/ide-core.$(LINUX_KMOD_SUFFIX)
+ $(LINUX_DIR)/drivers/ide/ide-core.ko
AUTOLOAD:= \
$(call AutoLoad,20,ide-core,1)
endef
define KernelPackage/ide-core/2.4
FILES+= \
- $(LINUX_DIR)/drivers/ide/ide-detect.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/ide/ide-disk.$(LINUX_KMOD_SUFFIX)
+ $(LINUX_DIR)/drivers/ide/ide-detect.ko \
+ $(LINUX_DIR)/drivers/ide/ide-disk.ko
AUTOLOAD+= \
$(call AutoLoad,35,ide-detect,1) \
$(call AutoLoad,40,ide-disk,1)
define KernelPackage/ide-core/2.6
FILES+= \
- $(LINUX_DIR)/drivers/ide/ide-gd_mod.$(LINUX_KMOD_SUFFIX)
+ $(LINUX_DIR)/drivers/ide/ide-gd_mod.ko
AUTOLOAD+= \
$(call AutoLoad,40,ide-gd_mod,1)
endef
define AddDepends/ide
SUBMENU:=$(BLOCK_MENU)
- DEPENDS:=kmod-ide-core $(1)
+ DEPENDS+=kmod-ide-core $(1)
endef
define KernelPackage/ide-generic
-$(call AddDepends/ide,@PCI_SUPPORT)
SUBMENU:=$(BLOCK_MENU)
+ DEPENDS:=@PCI_SUPPORT
TITLE:=Kernel support for generic PCI IDE chipsets
KCONFIG:=CONFIG_BLK_DEV_GENERIC
+ $(call AddDepends/ide)
endef
define KernelPackage/ide-generic/2.4
FILES+= \
- $(LINUX_DIR)/drivers/ide/pci/generic.$(LINUX_KMOD_SUFFIX)
+ $(LINUX_DIR)/drivers/ide/pci/generic.ko
AUTOLOAD+= \
$(call AutoLoad,30,generic,1)
endef
define KernelPackage/ide-generic/2.6
FILES+= \
- $(LINUX_DIR)/drivers/ide/ide-pci-generic.$(LINUX_KMOD_SUFFIX)
+ $(LINUX_DIR)/drivers/ide/ide-pci-generic.ko
AUTOLOAD+= \
$(call AutoLoad,30,ide-pci-generic,1)
endef
define KernelPackage/ide-generic-old
-$(call AddDepends/ide,@LINUX_2_6)
SUBMENU:=$(BLOCK_MENU)
TITLE:=Kernel support for generic (legacy) IDE chipsets
KCONFIG:=CONFIG_IDE_GENERIC
- FILES:=$(LINUX_DIR)/drivers/ide/ide-generic.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/ide/ide-generic.ko
AUTOLOAD:=$(call AutoLoad,30,ide-generic,1)
+ $(call AddDepends/ide)
endef
$(eval $(call KernelPackage,ide-generic-old))
define KernelPackage/ide-aec62xx
-$(call AddDepends/ide,@PCI_SUPPORT)
TITLE:=Acard AEC62xx IDE driver
+ DEPENDS:=@PCI_SUPPORT
KCONFIG:=CONFIG_BLK_DEV_AEC62XX
- FILES:=$(LINUX_DIR)/drivers/ide/aec62xx.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/ide/aec62xx.ko
AUTOLOAD:=$(call AutoLoad,30,aec62xx,1)
+ $(call AddDepends/ide)
endef
define KernelPackage/ide-aec62xx/2.4
- FILES:=$(LINUX_DIR)/drivers/ide/pci/aec62xx.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/ide/pci/aec62xx.ko
endef
define KernelPackage/ide-aec62xx/description
define KernelPackage/ide-pdc202xx
-$(call AddDepends/ide,@PCI_SUPPORT)
TITLE:=Promise PDC202xx IDE driver
+ DEPENDS:=@PCI_SUPPORT
KCONFIG:=CONFIG_BLK_DEV_PDC202XX_OLD
- FILES:=$(LINUX_DIR)/drivers/ide/pdc202xx_old.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/ide/pdc202xx_old.ko
AUTOLOAD:=$(call AutoLoad,30,pdc202xx_old,1)
+ $(call AddDepends/ide)
endef
define KernelPackage/ide-pdc202xx/2.4
- FILES:=$(LINUX_DIR)/drivers/ide/pci/pdc202xx_old.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/ide/pci/pdc202xx_old.ko
endef
define KernelPackage/ide-pdc202xx/description
define KernelPackage/ide-it821x
-$(call AddDepends/ide,@PCI_SUPPORT)
TITLE:=ITE IT821x IDE driver
+ DEPENDS:=@PCI_SUPPORT
KCONFIG:=CONFIG_BLK_DEV_IT821X
- FILES=$(LINUX_DIR)/drivers/ide/it821x.$(LINUX_KMOD_SUFFIX)
+ FILES=$(LINUX_DIR)/drivers/ide/it821x.ko
AUTOLOAD:=$(call AutoLoad,30,it821x,1)
+ $(call AddDepends/ide)
endef
define KernelPackage/ide-it821x/description
$(eval $(call KernelPackage,ide-it821x))
-define KernelPackage/scsi-core
+define KernelPackage/libsas
SUBMENU:=$(BLOCK_MENU)
- TITLE:=SCSI device support
- DEPENDS:=@!TARGET_x86
- KCONFIG:= \
- CONFIG_SCSI \
- CONFIG_BLK_DEV_SD
+ TITLE:=SAS Domain Transport Attributes
+ DEPENDS:=@TARGET_x86
+ KCONFIG:=CONFIG_SCSI_SAS_LIBSAS \
+ CONFIG_SCSI_SAS_ATTRS \
+ CONFIG_SCSI_SAS_ATA=y \
+ CONFIG_SCSI_SAS_HOST_SMP=y \
+ CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
FILES:= \
- $(if $(findstring y,$(CONFIG_SCSI)),,$(LINUX_DIR)/drivers/scsi/scsi_mod.$(LINUX_KMOD_SUFFIX)) \
- $(LINUX_DIR)/drivers/scsi/sd_mod.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,20,scsi_mod,1) $(call AutoLoad,40,sd_mod,1)
+ $(LINUX_DIR)/drivers/scsi/scsi_transport_sas.ko \
+ $(LINUX_DIR)/drivers/scsi/libsas/libsas.ko
+ AUTOLOAD:=$(call AutoLoad,29,scsi_transport_sas libsas,1)
endef
-$(eval $(call KernelPackage,scsi-core))
-
-
-define KernelPackage/scsi-generic
- SUBMENU:=$(BLOCK_MENU)
- TITLE:=Kernel support for SCSI generic
- KCONFIG:= \
- CONFIG_CHR_DEV_SG
- FILES:= \
- $(LINUX_DIR)/drivers/scsi/sg.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,65,sg)
+define KernelPackage/libsas/description
+ SAS Domain Transport Attributes support.
endef
-$(eval $(call KernelPackage,scsi-generic))
+$(eval $(call KernelPackage,libsas,1))
define KernelPackage/loop
KCONFIG:= \
CONFIG_BLK_DEV_LOOP \
CONFIG_BLK_DEV_CRYPTOLOOP=n
- FILES:=$(LINUX_DIR)/drivers/block/loop.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/block/loop.ko
AUTOLOAD:=$(call AutoLoad,30,loop)
endef
$(eval $(call KernelPackage,loop))
+define KernelPackage/mvsas
+ SUBMENU:=$(BLOCK_MENU)
+ TITLE:=Marvell 88SE6440 SAS/SATA driver
+ DEPENDS:=@TARGET_x86 +kmod-libsas
+ KCONFIG:=CONFIG_SCSI_MVSAS
+ ifneq ($(CONFIG_LINUX_2_6_30),)
+ FILES:=$(LINUX_DIR)/drivers/scsi/mvsas.ko
+ else
+ FILES:=$(LINUX_DIR)/drivers/scsi/mvsas/mvsas.ko
+ endif
+ AUTOLOAD:=$(call AutoLoad,40,mvsas,1)
+endef
+
+define KernelPackage/mvsas/description
+ Kernel support for the Marvell SAS SCSI adapters
+endef
+
+$(eval $(call KernelPackage,mvsas))
+
+
define KernelPackage/nbd
SUBMENU:=$(BLOCK_MENU)
TITLE:=Network block device support
KCONFIG:=CONFIG_BLK_DEV_NBD
- FILES:=$(LINUX_DIR)/drivers/block/nbd.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/block/nbd.ko
AUTOLOAD:=$(call AutoLoad,30,nbd)
endef
$(eval $(call KernelPackage,nbd))
-define KernelPackage/dm
+define KernelPackage/scsi-core
SUBMENU:=$(BLOCK_MENU)
- TITLE:=Device Mapper
- # All the "=n" are unnecessary, they're only there
- # to stop the config from asking the question.
- # MIRROR is M because I've needed it for pvmove.
+ TITLE:=SCSI device support
+ DEPENDS:=@!TARGET_x86
KCONFIG:= \
- CONFIG_BLK_DEV_MD=n \
- CONFIG_DM_DEBUG=n \
- CONFIG_DM_CRYPT=n \
- CONFIG_DM_UEVENT=n \
- CONFIG_DM_DELAY=n \
- CONFIG_DM_MULTIPATH=n \
- CONFIG_DM_ZERO=n \
- CONFIG_DM_SNAPSHOT=n \
- CONFIG_DM_LOG_USERSPACE=n \
- CONFIG_MD=y \
- CONFIG_BLK_DEV_DM \
- CONFIG_DM_MIRROR
- FILES:=$(LINUX_DIR)/drivers/md/dm-*.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,30,dm-mod dm-log dm-region-hash dm-mirror)
-endef
-
-define KernelPackage/dm/description
- Kernel module necessary for LVM2 support
-endef
-
-$(eval $(call KernelPackage,dm))
-
-
-define KernelPackage/pata-rb153-cf
-$(call AddDepends/ata,@TARGET_adm5120_router_le)
- TITLE:=RouterBOARD 153 CF Slot support
- KCONFIG:=CONFIG_PATA_RB153_CF
- FILES:=$(LINUX_DIR)/drivers/ata/pata_rb153_cf.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,30,pata_rb153_cf,1)
-endef
-
-define KernelPackage/pata-rb153-cf/description
- Kernel support for the RouterBoard 153 CF slot.
-endef
-
-$(eval $(call KernelPackage,pata-rb153-cf,1))
-
-
-define KernelPackage/aoe
- SUBMENU:=$(BLOCK_MENU)
- TITLE:=ATA over Ethernet support
- KCONFIG:=CONFIG_ATA_OVER_ETH
- FILES:=$(LINUX_DIR)/drivers/block/aoe/aoe.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,30,aoe)
-endef
-
-define KernelPackage/aoe/description
- Kernel support for ATA over Ethernet
-endef
-
-$(eval $(call KernelPackage,aoe))
-
-define KernelPackage/ps3vram
- SUBMENU:=$(BLOCK_MENU)
- TITLE:=PS3 Video RAM Storage Driver
- DEPENDS:=@TARGET_ps3||TARGET_ps3chk
- KCONFIG:=CONFIG_PS3_VRAM
- FILES:=$(LINUX_DIR)/drivers/block/ps3vram.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,01,ps3vram)
-endef
-
-define KernelPackage/ps3vram/description
- Kernel support for PS3 Video RAM Storage
-endef
-
-$(eval $(call KernelPackage,ps3vram))
-
-define KernelPackage/axonram
- SUBMENU:=$(BLOCK_MENU)
- TITLE:=Axon DDR2 memory device driver
- DEPENDS:=@TARGET_pxcab
- KCONFIG:=CONFIG_AXON_RAM
- FILES:=$(LINUX_DIR)/arch/powerpc/sysdev/axonram.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,01,axonram)
-endef
-
-define KernelPackage/axonram/description
- Kernel support for Axon DDR2 memory device
-endef
-
-$(eval $(call KernelPackage,axonram))
-
-define KernelPackage/libsas
- SUBMENU:=$(BLOCK_MENU)
- TITLE:=SAS Domain Transport Attributes
- DEPENDS:=@TARGET_x86
- KCONFIG:=CONFIG_SCSI_SAS_LIBSAS \
- CONFIG_SCSI_SAS_ATTRS \
- CONFIG_SCSI_SAS_ATA=y \
- CONFIG_SCSI_SAS_HOST_SMP=y \
- CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
+ CONFIG_SCSI \
+ CONFIG_BLK_DEV_SD
FILES:= \
- $(LINUX_DIR)/drivers/scsi/scsi_transport_sas.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/scsi/libsas/libsas.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,29,scsi_transport_sas libsas,1)
+ $(if $(findstring y,$(CONFIG_SCSI)),,$(LINUX_DIR)/drivers/scsi/scsi_mod.ko) \
+ $(LINUX_DIR)/drivers/scsi/sd_mod.ko
+ AUTOLOAD:=$(call AutoLoad,20,scsi_mod,1) $(call AutoLoad,40,sd_mod,1)
endef
-define KernelPackage/libsas/description
- SAS Domain Transport Attributes support.
-endef
+$(eval $(call KernelPackage,scsi-core))
-$(eval $(call KernelPackage,libsas,1))
-define KernelPackage/mvsas
+define KernelPackage/scsi-generic
SUBMENU:=$(BLOCK_MENU)
- TITLE:=Marvell 88SE6440 SAS/SATA driver
- DEPENDS:=@TARGET_x86 +kmod-libsas
- KCONFIG:=CONFIG_SCSI_MVSAS
- ifneq ($(CONFIG_LINUX_2_6_25)$(CONFIG_LINUX_2_6_30),)
- FILES:=$(LINUX_DIR)/drivers/scsi/mvsas.$(LINUX_KMOD_SUFFIX)
- else
- FILES:=$(LINUX_DIR)/drivers/scsi/mvsas/mvsas.$(LINUX_KMOD_SUFFIX)
- endif
- AUTOLOAD:=$(call AutoLoad,40,mvsas,1)
-endef
-
-define KernelPackage/mvsas/description
- Kernel support for the Marvell SAS SCSI adapters
+ TITLE:=Kernel support for SCSI generic
+ KCONFIG:= \
+ CONFIG_CHR_DEV_SG
+ FILES:= \
+ $(LINUX_DIR)/drivers/scsi/sg.ko
+ AUTOLOAD:=$(call AutoLoad,65,sg)
endef
-$(eval $(call KernelPackage,mvsas))
+$(eval $(call KernelPackage,scsi-generic))
projects / openwrt.git / blobdiff