-diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
-index cfe288a..c528024 100644
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -55,6 +55,12 @@ config MTD_NAND_TOTO
+Index: linux-2.6.21.1/drivers/mtd/nand/Kconfig
+===================================================================
+--- linux-2.6.21.1.orig/drivers/mtd/nand/Kconfig 2007-04-27 23:49:26.000000000 +0200
++++ linux-2.6.21.1/drivers/mtd/nand/Kconfig 2007-06-07 01:31:30.927069952 +0200
+@@ -75,6 +75,12 @@
help
- Support for NAND flash on Texas Instruments Toto platform.
+ Support for NAND flash on Technologic Systems TS-7250 platform.
+config MTD_NAND_RB500
+ tristate "NAND Flash device on RB500 board"
config MTD_NAND_IDS
tristate
-diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
-index 4174202..2be57c1 100644
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -8,6 +8,7 @@ obj-$(CONFIG_MTD_NAND_IDS) += nand_ids.
-
+Index: linux-2.6.21.1/drivers/mtd/nand/Makefile
+===================================================================
+--- linux-2.6.21.1.orig/drivers/mtd/nand/Makefile 2007-04-27 23:49:26.000000000 +0200
++++ linux-2.6.21.1/drivers/mtd/nand/Makefile 2007-06-07 01:31:30.927069952 +0200
+@@ -10,6 +10,7 @@
obj-$(CONFIG_MTD_NAND_SPIA) += spia.o
+ obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o
obj-$(CONFIG_MTD_NAND_TOTO) += toto.o
+obj-$(CONFIG_MTD_NAND_RB500) += rbmipsnand.o
obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o
obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o
obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o
-diff --git a/drivers/mtd/nand/rbmipsnand.c b/drivers/mtd/nand/rbmipsnand.c
-new file mode 100644
-index 0000000..6f7452a
---- /dev/null
-+++ b/drivers/mtd/nand/rbmipsnand.c
-@@ -0,0 +1,211 @@
-+#include <linux/init.h>
-+#include <linux/mtd/nand.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/delay.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/bootinfo.h>
-+//#include <asm/rb/rb100.h>
-+
-+#define IDT434_REG_BASE ((volatile void *) KSEG1ADDR(0x18000000))
-+
-+#define SMEM1(x) (*((volatile unsigned char *) (KSEG1ADDR(SMEM1_BASE) + x)))
-+
-+#define GPIOF 0x050000
-+#define GPIOC 0x050004
-+#define GPIOD 0x050008
-+
-+#define GPIO_RDY (1 << 0x08)
-+#define GPIO_WPX (1 << 0x09)
-+#define GPIO_ALE (1 << 0x0a)
-+#define GPIO_CLE (1 << 0x0b)
-+
-+#define NAND_RW_REG 0x0 //data register
-+#define NAND_SET_CEn 0x1 //CE# low
-+#define NAND_CLR_CEn 0x2 //CE# high
-+#define NAND_CLR_CLE 0x3 //CLE low
-+#define NAND_SET_CLE 0x4 //CLE high
-+#define NAND_CLR_ALE 0x5 //ALE low
-+#define NAND_SET_ALE 0x6 //ALE high
-+#define NAND_SET_SPn 0x7 //SP# low (use spare area)
-+#define NAND_CLR_SPn 0x8 //SP# high (do not use spare area)
-+#define NAND_SET_WPn 0x9 //WP# low
-+#define NAND_CLR_WPn 0xA //WP# high
-+#define NAND_STS_REG 0xB //Status register
-+
-+#define DEV2BASE 0x010020
-+
-+#define LO_WPX (1 << 0)
-+#define LO_ALE (1 << 1)
-+#define LO_CLE (1 << 2)
-+#define LO_CEX (1 << 3)
-+#define LO_FOFF (1 << 5)
-+#define LO_SPICS (1 << 6)
-+#define LO_ULED (1 << 7)
-+
-+#define MEM32(x) *((volatile unsigned *) (x))
-+static void __iomem *p_nand;
-+
-+extern void changeLatchU5(unsigned char orMask, unsigned char nandMask);
-+
-+static int rb500_dev_ready(struct mtd_info *mtd) {
-+ return MEM32(IDT434_REG_BASE + GPIOD) & GPIO_RDY;
-+}
-+/*
-+static int rb100_dev_ready(struct mtd_info *mtd) {
-+ return SMEM1(NAND_STS_REG) & 0x80;
-+}
-+*/
-+static unsigned long iflags = 0;
-+static int ioff = 0;
-+/*
-+static void rbmips_hwcontrol400(struct mtd_info *mtd, int cmd) {
-+ switch (cmd) {
-+ case NAND_CTL_SETCLE:
-+ MEM32(IDT434_REG_BASE + GPIOD) |= GPIO_CLE;
-+ break;
-+ case NAND_CTL_CLRCLE:
-+ MEM32(IDT434_REG_BASE + GPIOD) &= ~GPIO_CLE;
-+ break;
-+ case NAND_CTL_SETALE:
-+ MEM32(IDT434_REG_BASE + GPIOD) |= GPIO_ALE;
-+ break;
-+ case NAND_CTL_CLRALE:
-+ MEM32(IDT434_REG_BASE + GPIOD) &= ~GPIO_ALE;
-+ break;
-+ default:
-+ break;
-+ }
-+}
-+*/
-+static void rbmips_hwcontrol500(struct mtd_info *mtd, int cmd) {
-+ switch (cmd) {
-+ case NAND_CTL_SETCLE:
-+ changeLatchU5(LO_CLE, 0);
-+ break;
-+ case NAND_CTL_CLRCLE:
-+ changeLatchU5(0, LO_CLE);
-+ break;
-+ case NAND_CTL_SETALE:
-+ changeLatchU5(LO_ALE, 0);
-+ break;
-+ case NAND_CTL_CLRALE:
-+ changeLatchU5(0, LO_ALE);
-+ break;
-+ default:
-+ break;
-+ }
-+}
-+/*
-+static void rbmips_hwcontrol100(struct mtd_info *mtd, int cmd){
-+ switch(cmd){
-+ case NAND_CTL_SETCLE:
-+ SMEM1(NAND_SET_CLE) = 0x01;
-+ break;
-+ case NAND_CTL_CLRCLE:
-+ SMEM1(NAND_CLR_CLE) = 0x01;
-+ break;
-+ case NAND_CTL_SETALE:
-+ SMEM1(NAND_SET_ALE) = 0x01;
-+ break;
-+ case NAND_CTL_CLRALE:
-+ SMEM1(NAND_CLR_ALE) = 0x01;
-+ break;
-+ case NAND_CTL_SETNCE:
-+ SMEM1(NAND_SET_CEn) = 0x01;
-+ break;
-+ case NAND_CTL_CLRNCE:
-+ SMEM1(NAND_CLR_CEn) = 0x01;
-+ break;
-+ }
-+}
-+*/
-+static struct mtd_partition partition_info[] = {
-+ {
-+ name: "RouterBoard NAND Boot",
-+ offset: 0,
-+ size: 4 * 1024 * 1024
-+ },
-+ {
-+ name: "RouterBoard NAND Main",
-+ offset: MTDPART_OFS_NXTBLK,
-+ size: MTDPART_SIZ_FULL
-+ }
-+};
-+
-+static struct mtd_info rmtd;
-+static struct nand_chip rnand;
-+
-+static unsigned init_ok = 0;
-+
-+unsigned get_rbnand_block_size(void) {
-+ if (init_ok) return rmtd.oobblock; else return 0;
-+}
-+
-+EXPORT_SYMBOL(get_rbnand_block_size);
-+
-+int __init rbmips_init(void) {
-+ memset(&rmtd, 0, sizeof(rmtd));
-+ memset(&rnand, 0, sizeof(rnand));
-+/*
-+ if (is_rb500()) {
-+ if (is_rb400()) {
-+ printk("RB400 nand\n");
-+ MEM32(IDT434_REG_BASE + GPIOD) |= GPIO_WPX;
-+ MEM32(IDT434_REG_BASE + GPIOD) &= ~GPIO_CLE;
-+ MEM32(IDT434_REG_BASE + GPIOD) &= ~GPIO_ALE;
-+ rnand.hwcontrol = rbmips_hwcontrol400;
-+ } else {
-+*/
-+ printk("RB500 nand\n");
-+ changeLatchU5(LO_WPX | LO_FOFF | LO_CEX,
-+ LO_ULED | LO_ALE | LO_CLE);
-+ rnand.hwcontrol = rbmips_hwcontrol500;
-+// }
-+
-+ rnand.dev_ready = rb500_dev_ready;
-+ rnand.IO_ADDR_W = (unsigned char *)
-+ KSEG1ADDR(MEM32(IDT434_REG_BASE + DEV2BASE));
-+ rnand.IO_ADDR_R = rnand.IO_ADDR_W;
-+/* } else if (is_rb100()) {
-+ printk("RB100 nand\n");
-+ MEM32(0xB2000064) = 0x100;
-+ MEM32(0xB2000008) = 0x1;
-+ SMEM1(NAND_SET_SPn) = 0x01;
-+ SMEM1(NAND_CLR_WPn) = 0x01;
-+ rnand.IO_ADDR_R = (unsigned char *)KSEG1ADDR(SMEM1_BASE);
-+ rnand.IO_ADDR_W = rnand.IO_ADDR_R;
-+ rnand.hwcontrol = rbmips_hwcontrol100;
-+ rnand.dev_ready = rb100_dev_ready;
-+ }
-+*/
-+ p_nand = (void __iomem *)ioremap(( void*)0x18a20000, 0x1000);
-+ if (!p_nand) {
-+ printk("RBnand Unable ioremap buffer");
-+ return -ENXIO;
-+ }
-+ rnand.eccmode = NAND_ECC_SOFT;
-+ rnand.chip_delay = 25;
-+ rnand.options |= NAND_NO_AUTOINCR;
-+ rmtd.priv = &rnand;
-+
-+ int *b = ( int *)KSEG1ADDR( 0x18010020);
-+ printk( "dev2base 0x%08x mask 0x%08x c 0x%08x tc 0x%08x\n", b[ 0], b[ 1], b[ 2], b[ 3]);
-+
-+ if (nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)
-+ && nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)) {
-+ printk("RBxxx nand device not found");
-+ iounmap ((void *)p_nand);
-+ return -ENXIO;
-+ }
-+
-+ add_mtd_partitions(&rmtd, partition_info, 2);
-+ init_ok = 1;
-+ return 0;
-+}
-+
-+module_init(rbmips_init);
-+
-+
-+
-+
-+
projects / openwrt.git / blobdiff