#
-# Copyright (C) 2006 OpenWrt.org
+# Copyright (C) 2006-2009 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
-# $Id$
-EMENU:=Other modules
+OTHER_MENU:=Other modules
define KernelPackage/crc-itu-t
- SUBMENU:=$(EMENU)
+ SUBMENU:=$(OTHER_MENU)
TITLE:=CRC ITU-T V.41 support
- DESCRIPTION:=Kernel module for CRC ITU-T V.41 support
KCONFIG:=CONFIG_CRC_ITU_T
FILES:=$(LINUX_DIR)/lib/crc-itu-t.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,20,crc-itu-t)
endef
+define KernelPackage/crc-itu-t/description
+ Kernel module for CRC ITU-T V.41 support
+endef
+
$(eval $(call KernelPackage,crc-itu-t))
+define KernelPackage/crc-ccitt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=CRC-CCITT support
+ KCONFIG:=CONFIG_CRC_CCITT
+ FILES:=$(LINUX_DIR)/lib/crc-ccitt.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,20,crc-ccitt)
+endef
-define KernelPackage/crypto
- SUBMENU:=$(EMENU)
- TITLE:=CryptoAPI modules
- KCONFIG:= \
- CONFIG_CRYPTO_HMAC \
- CONFIG_CRYPTO_NULL \
- CONFIG_CRYPTO_MD4 \
- CONFIG_CRYPTO_MD5 \
- CONFIG_CRYPTO_SHA1 \
- CONFIG_CRYPTO_SHA256 \
- CONFIG_CRYPTO_SHA512 \
- CONFIG_CRYPTO_WP512 \
- CONFIG_CRYPTO_TGR192 \
- CONFIG_CRYPTO_DES \
- CONFIG_CRYPTO_BLOWFISH \
- CONFIG_CRYPTO_TWOFISH \
- CONFIG_CRYPTO_SERPENT \
- CONFIG_CRYPTO_AES \
- CONFIG_CRYPTO_CAST5 \
- CONFIG_CRYPTO_CAST6 \
- CONFIG_CRYPTO_TEA \
- CONFIG_CRYPTO_ARC4 \
- CONFIG_CRYPTO_KHAZAD \
- CONFIG_CRYPTO_ANUBIS \
- CONFIG_CRYPTO_DEFLATE \
- CONFIG_CRYPTO_MICHAEL_MIC \
- CONFIG_CRYPTO_CRC32C \
- CONFIG_CRYPTO_ECB \
- CONFIG_CRYPTO_BLKCIPHER
- FILES:=$(LINUX_DIR)/crypto/*.$(LINUX_KMOD_SUFFIX)
-endef
-
-$(eval $(call KernelPackage,crypto))
+define KernelPackage/crc-ccitt/description
+ Kernel module for CRC-CCITT support
+endef
+
+$(eval $(call KernelPackage,crc-ccitt))
+
+
+define KernelPackage/crc7
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=CRC7 support
+ KCONFIG:=CONFIG_CRC7
+ FILES:=$(LINUX_DIR)/lib/crc7.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,20,crc7)
+endef
+
+define KernelPackage/crc7/description
+ Kernel module for CRC7 support
+endef
+
+$(eval $(call KernelPackage,crc7))
+
+
+define KernelPackage/crc16
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=CRC16 support
+ KCONFIG:=CONFIG_CRC16
+ FILES:=$(LINUX_DIR)/lib/crc16.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,20,crc16)
+endef
+
+define KernelPackage/crc16/description
+ Kernel module for CRC16 support
+endef
+
+$(eval $(call KernelPackage,crc16))
define KernelPackage/eeprom-93cx6
- SUBMENU:=$(EMENU)
+ SUBMENU:=$(OTHER_MENU)
TITLE:=EEPROM 93CX6 support
- DESCRIPTION:=Kernel module for EEPROM 93CX6 support
DEPENDS:=@LINUX_2_6
KCONFIG:=CONFIG_EEPROM_93CX6
+ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.29)),1)
+ FILES:=$(LINUX_DIR)/drivers/misc/eeprom/eeprom_93cx6.$(LINUX_KMOD_SUFFIX)
+else
FILES:=$(LINUX_DIR)/drivers/misc/eeprom_93cx6.$(LINUX_KMOD_SUFFIX)
+endif
AUTOLOAD:=$(call AutoLoad,20,eeprom_93cx6)
endef
+define KernelPackage/eeprom-93cx6/description
+ Kernel module for EEPROM 93CX6 support
+endef
+
$(eval $(call KernelPackage,eeprom-93cx6))
define KernelPackage/lp
- SUBMENU:=$(EMENU)
+ SUBMENU:=$(OTHER_MENU)
TITLE:=Parallel port and line printer support
DEPENDS:=@LINUX_2_4
KCONFIG:= \
$(eval $(call KernelPackage,lp))
-
-define KernelPackage/soundcore
- SUBMENU:=$(EMENU)
- TITLE:=Sound support
- DESCRIPTION:=Kernel modules for sound support
- KCONFIG:=CONFIG_SOUND
-endef
-
-define KernelPackage/soundcore/2.4
- FILES:=$(LINUX_DIR)/drivers/sound/soundcore.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,30,soundcore)
-endef
-
-define KernelPackage/soundcore/2.6
- KCONFIG+= \
- CONFIG_SND \
- CONFIG_SND_HWDEP \
- CONFIG_SND_RAWMIDI \
- CONFIG_SND_TIMER \
- CONFIG_SND_PCM
+define KernelPackage/pcspkr
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=PC speaker support
+ DEPENDS:=@LINUX_2_6
+ KCONFIG:=CONFIG_INPUT_PCSPKR
FILES:= \
- $(LINUX_DIR)/sound/soundcore.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/sound/core/snd.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/sound/core/snd-page-alloc.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/sound/core/snd-hwdep.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/sound/core/snd-rawmidi.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/sound/core/snd-timer.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/sound/core/snd-pcm.$(LINUX_KMOD_SUFFIX) \
- $(if $(CONFIG_SND_MIXER_OSS),$(LINUX_DIR)/sound/core/oss/snd-mixer-oss.$(LINUX_KMOD_SUFFIX)) \
- $(if $(CONFIG_SND_PCM_OSS),$(LINUX_DIR)/sound/core/oss/snd-pcm-oss.$(LINUX_KMOD_SUFFIX))
- AUTOLOAD:=$(call AutoLoad,30, \
- soundcore \
- snd \
- snd-page-alloc \
- snd-hwdep \
- snd-rawmidi \
- snd-timer \
- snd-pcm \
- $(if $(CONFIG_SND_MIXER_OSS),snd-mixer-oss) \
- $(if $(CONFIG_SND_PCM_OSS),snd-pcm-oss) \
+ $(LINUX_DIR)/drivers/input/misc/pcspkr.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50, \
+ pcspkr \
)
endef
-define KernelPackage/soundcore/uml-2.6
- KCONFIG+= \
- CONFIG_HOSTAUDIO
- FILES:= \
- $(LINUX_DIR)/sound/soundcore.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/arch/um/drivers/hostaudio.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,30,soundcore hostaudio)
+define KernelPackage/pcspkr/description
+ This enables sounds (tones) through the pc speaker
endef
-$(eval $(call KernelPackage,soundcore))
-
-
-define KernelPackage/loop
- SUBMENU:=$(EMENU)
- TITLE:=Loopback device support
- DESCRIPTION:=Kernel module for loopback device support
- KCONFIG:=CONFIG_BLK_DEV_LOOP
- FILES:=$(LINUX_DIR)/drivers/block/loop.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,30,loop)
-endef
-
-$(eval $(call KernelPackage,loop))
-
-
-define KernelPackage/nbd
- SUBMENU:=$(EMENU)
- TITLE:=Network block device support
- DESCRIPTION:=Kernel module for network block device support
- KCONFIG:=CONFIG_BLK_DEV_NBD
- FILES:=$(LINUX_DIR)/drivers/block/nbd.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,30,nbd)
-endef
-
-$(eval $(call KernelPackage,nbd))
-
-
-define KernelPackage/capi
- SUBMENU:=$(EMENU)
- TITLE:=CAPI Support
- DESCRIPTION:=Kernel module for basic CAPI support
- DEPENDS:=@LINUX_2_6
- KCONFIG:= \
- CONFIG_ISDN \
- CONFIG_ISDN_CAPI \
- CONFIG_ISDN_CAPI_CAPI20
- FILES:= \
- $(LINUX_DIR)/drivers/isdn/capi/kernelcapi.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/isdn/capi/capi.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,30,kernelcapi capi)
-endef
-
-$(eval $(call KernelPackage,capi))
-
+$(eval $(call KernelPackage,pcspkr))
define KernelPackage/pcmcia-core
- SUBMENU:=$(EMENU)
+ SUBMENU:=$(OTHER_MENU)
TITLE:=PCMCIA/CardBus support
- DESCRIPTION:=Kernel support for PCMCIA/CardBus controllers
DEPENDS:=@PCMCIA_SUPPORT
-endef
-
-define KernelPackage/pcmcia-core/2.4
KCONFIG:= \
CONFIG_PCMCIA \
- CONFIG_CARDBUS
- FILES:= \
- $(LINUX_DIR)/drivers/pcmcia/pcmcia_core.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/ds.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/yenta_socket.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,40,pcmcia_core yenta_socket ds)
-endef
-
-define KernelPackage/pcmcia-core/2.6
- KCONFIG:= \
+ CONFIG_CARDBUS \
CONFIG_PCCARD \
- CONFIG_PCMCIA \
- CONFIG_YENTA \
CONFIG_PCCARD_NONSTATIC \
PCMCIA_DEBUG=n
+endef
+
+define KernelPackage/pcmcia-core/2.4
+# KCONFIG:= \
+# CONFIG_PCMCIA \
+# CONFIG_CARDBUS
FILES:= \
$(LINUX_DIR)/drivers/pcmcia/pcmcia_core.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/pcmcia.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/rsrc_nonstatic.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/yenta_socket.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,40,pcmcia_core pcmcia rsrc_nonstatic yenta_socket)
+ $(LINUX_DIR)/drivers/pcmcia/ds.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,25,pcmcia_core ds)
endef
-define KernelPackage/pcmcia-core/au1000-2.6
+define KernelPackage/pcmcia-core/2.6
+# KCONFIG:= \
+# CONFIG_PCCARD \
+# CONFIG_PCMCIA \
+# CONFIG_PCCARD_NONSTATIC \
+# PCMCIA_DEBUG=n
FILES:= \
$(LINUX_DIR)/drivers/pcmcia/pcmcia_core.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/drivers/pcmcia/pcmcia.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/rsrc_nonstatic.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/pcmcia/au1x00_ss.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,40,pcmcia_core pcmcia rsrc_nonstatic au1x00_ss)
+ $(LINUX_DIR)/drivers/pcmcia/rsrc_nonstatic.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,25,pcmcia_core pcmcia rsrc_nonstatic)
endef
+define KernelPackage/pcmcia-core/description
+ Kernel support for PCMCIA/CardBus controllers
+endef
$(eval $(call KernelPackage,pcmcia-core))
+define KernelPackage/pcmcia-yenta
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=yenta socket driver
+ DEPENDS:=kmod-pcmcia-core
+ KCONFIG:=CONFIG_YENTA
+ FILES:=$(LINUX_DIR)/drivers/pcmcia/yenta_socket.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,41,yenta_socket)
+endef
+
+$(eval $(call KernelPackage,pcmcia-yenta))
+
+define KernelPackage/pcmcia-au1000
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=RMI/AMD Au1000 PCMCIA support
+ DEPENDS:=kmod-pcmcia-core @TARGET_au1000
+ FILES:=$(LINUX_DIR)/drivers/pcmcia/au1x00_ss.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,41,au1x00_ss)
+endef
+
+$(eval $(call KernelPackage,pcmcia-au1000))
+
+define KernelPackage/pcmcia-bcm63xx
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Broadcom BCM63xx PCMCIA support
+ DEPENDS:=kmod-pcmcia-core @TARGET_brcm63xx
+ KCONFIG:=CONFIG_PCMCIA_BCM63XX
+ FILES:=$(LINUX_DIR)/drivers/pcmcia/bcm63xx_pcmcia.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,41,bcm63xx_pcmcia)
+endef
+
+define KernelPackage/pcmcia-bcm63xx/description
+ Kernel support for PCMCIA/CardBus controller on the BCM63xx SoC
+endef
+
+$(eval $(call KernelPackage,pcmcia-bcm63xx))
+
define KernelPackage/pcmcia-serial
- SUBMENU:=$(EMENU)
+ SUBMENU:=$(OTHER_MENU)
TITLE:=Serial devices support
- DESCRIPTION:=Kernel support for PCMCIA/CardBus serial devices
DEPENDS:=kmod-pcmcia-core
+ KCONFIG:= \
+ CONFIG_PCMCIA_SERIAL_CS \
+ CONFIG_SERIAL_8250_CS
AUTOLOAD:=$(call AutoLoad,45,serial_cs)
endef
define KernelPackage/pcmcia-serial/2.4
- KCONFIG:=CONFIG_PCMCIA_SERIAL_CS
+# KCONFIG:=CONFIG_PCMCIA_SERIAL_CS
FILES:=$(LINUX_DIR)/drivers/char/pcmcia/serial_cs.$(LINUX_KMOD_SUFFIX)
endef
define KernelPackage/pcmcia-serial/2.6
- KCONFIG:=CONFIG_SERIAL_8250_CS
+# KCONFIG:=CONFIG_SERIAL_8250_CS
FILES:=$(LINUX_DIR)/drivers/serial/serial_cs.$(LINUX_KMOD_SUFFIX)
endef
+define KernelPackage/pcmcia-serial/description
+ Kernel support for PCMCIA/CardBus serial devices
+endef
+
$(eval $(call KernelPackage,pcmcia-serial))
+define KernelPackage/ssb
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Silicon Sonics Backplane glue code
+ DEPENDS:=@LINUX_2_6 @PCI_SUPPORT @!TARGET_brcm47xx||!TARGET_brcm63xx
+ KCONFIG:=\
+ CONFIG_SSB \
+ CONFIG_SSB_B43_PCI_BRIDGE=y \
+ CONFIG_SSB_DRIVER_MIPS=n \
+ CONFIG_SSB_DRIVER_PCICORE=y \
+ CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y \
+ CONFIG_SSB_PCIHOST=y \
+ CONFIG_SSB_PCIHOST_POSSIBLE=y \
+ CONFIG_SSB_POSSIBLE=y \
+ CONFIG_SSB_SPROM=y \
+ CONFIG_SSB_SILENT=y
+ FILES:=$(LINUX_DIR)/drivers/ssb/ssb.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,29,ssb)
+endef
-define KernelPackage/bluetooth
- SUBMENU:=$(EMENU)
- TITLE:=Bluetooth support
- DEPENDS:=@USB_SUPPORT
- DESCRIPTION:=Kernel support for Bluetooth devices
+define KernelPackage/ssb/description
+ Silicon Sonics Backplane glue code.
endef
-define KernelPackage/bluetooth/2.4
+$(eval $(call KernelPackage,ssb))
+
+
+define KernelPackage/bluetooth
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Bluetooth support
+ DEPENDS:=@USB_SUPPORT +kmod-usb-core +kmod-input-core
KCONFIG:= \
CONFIG_BLUEZ \
CONFIG_BLUEZ_L2CAP \
CONFIG_BLUEZ_RFCOMM \
CONFIG_BLUEZ_BNEP \
CONFIG_BLUEZ_HCIUART \
- CONFIG_BLUEZ_HCIUSB
+ CONFIG_BLUEZ_HCIUSB \
+ CONFIG_BLUEZ_HIDP \
+ CONFIG_BT \
+ CONFIG_BT_L2CAP \
+ CONFIG_BT_SCO \
+ CONFIG_BT_RFCOMM \
+ CONFIG_BT_BNEP \
+ CONFIG_BT_HCIBTUSB \
+ CONFIG_BT_HCIUSB \
+ CONFIG_BT_HCIUART \
+ CONFIG_BT_HIDP
+endef
+
+define KernelPackage/bluetooth/2.4
+# KCONFIG:= \
+# CONFIG_BLUEZ \
+# CONFIG_BLUEZ_L2CAP \
+# CONFIG_BLUEZ_SCO \
+# CONFIG_BLUEZ_RFCOMM \
+# CONFIG_BLUEZ_BNEP \
+# CONFIG_BLUEZ_HCIUART \
+# CONFIG_BLUEZ_HCIUSB
FILES:= \
$(LINUX_DIR)/net/bluetooth/bluez.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/net/bluetooth/l2cap.$(LINUX_KMOD_SUFFIX) \
endef
define KernelPackage/bluetooth/2.6
- KCONFIG:= \
- CONFIG_BT \
- CONFIG_BT_L2CAP \
- CONFIG_BT_SCO \
- CONFIG_BT_RFCOMM \
- CONFIG_BT_BNEP \
- CONFIG_BT_HCIUSB \
- CONFIG_BT_HCIUART
+# KCONFIG:= \
+# CONFIG_BT \
+# CONFIG_BT_L2CAP \
+# CONFIG_BT_SCO \
+# CONFIG_BT_RFCOMM \
+# CONFIG_BT_BNEP \
+# CONFIG_BT_HCIUSB \
+# CONFIG_BT_HCIUART
+ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.27)),1)
FILES:= \
$(LINUX_DIR)/net/bluetooth/bluetooth.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/net/bluetooth/l2cap.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/net/bluetooth/sco.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/net/bluetooth/rfcomm/rfcomm.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/net/bluetooth/bnep/bnep.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/net/bluetooth/hidp/hidp.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/drivers/bluetooth/hci_uart.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/drivers/bluetooth/btusb.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,90,bluetooth l2cap sco rfcomm bnep hidp hci_uart btusb)
+else
+ FILES:= \
+ $(LINUX_DIR)/net/bluetooth/bluetooth.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/net/bluetooth/l2cap.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/net/bluetooth/sco.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/net/bluetooth/rfcomm/rfcomm.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/net/bluetooth/bnep/bnep.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/net/bluetooth/hidp/hidp.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/drivers/bluetooth/hci_uart.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/drivers/bluetooth/hci_usb.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,90,bluetooth l2cap sco rfcomm bnep hci_uart hci_usb)
+ AUTOLOAD:=$(call AutoLoad,90,bluetooth l2cap sco rfcomm bnep hidp hci_uart hci_usb)
+endif
+endef
+
+define KernelPackage/bluetooth/description
+ Kernel support for Bluetooth devices
endef
$(eval $(call KernelPackage,bluetooth))
define KernelPackage/mmc
- SUBMENU:=$(EMENU)
+ SUBMENU:=$(OTHER_MENU)
TITLE:=MMC/SD Card Support
- DEPENDS:=@LINUX_2_6_AT91
- DESCRIPTION:=Kernel support for MMC/SD cards
+ DEPENDS:=@LINUX_2_6
KCONFIG:= \
CONFIG_MMC \
CONFIG_MMC_BLOCK \
- CONFIG_MMC_AT91
+ CONFIG_MMC_DEBUG=n \
+ CONFIG_MMC_UNSAFE_RESUME=n \
+ CONFIG_MMC_BLOCK_BOUNCE=y \
+ CONFIG_MMC_SDHCI=n \
+ CONFIG_MMC_TIFM_SD=n \
+ CONFIG_MMC_WBSD=n \
+ CONFIG_SDIO_UART=n
FILES:= \
- $(LINUX_DIR)/drivers/mmc/mmc_core.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/mmc/mmc_block.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/mmc/at91_mci.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,90,mmc_core mmc_block at91_mci)
+ $(LINUX_DIR)/drivers/mmc/core/mmc_core.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/drivers/mmc/card/mmc_block.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,90,mmc_core mmc_block)
+endef
+
+define KernelPackage/mmc/description
+ Kernel support for MMC/SD cards
endef
$(eval $(call KernelPackage,mmc))
+define KernelPackage/mmc-at91
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=MMC/SD Card Support on AT91
+ DEPENDS:=@TARGET_at91 +kmod-mmc
+ KCONFIG:=CONFIG_MMC_AT91
+ FILES:=$(LINUX_DIR)/drivers/mmc/host/at91_mci.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,90,at91_mci)
+endef
+
+define KernelPackage/mmc-at91/description
+ Kernel support for MMC/SD cards on the AT91 target
+endef
+
+$(eval $(call KernelPackage,mmc-at91))
+
+
+# XXX: added a workaround for watchdog path changes
+ifeq ($(KERNEL),2.4)
+ WATCHDOG_DIR=char
+endif
+ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.24)),1)
+ WATCHDOG_DIR=watchdog
+endif
+WATCHDOG_DIR?=char/watchdog
+
+define KernelPackage/atmel-wdt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=AT32AP700x watchdog
+ DEPENDS:=@TARGET_avr32
+ KCONFIG:=CONFIG_AT32AP700X_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/at32ap700x_wdt.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,at32ap700x_wdt)
+endef
+
+define KernelPackage/atmel-wdt/description
+ AT32AP700x watchdog
+endef
+
+$(eval $(call KernelPackage,atmel-wdt))
+
+
define KernelPackage/softdog
- SUBMENU:=$(EMENU)
+ SUBMENU:=$(OTHER_MENU)
TITLE:=Software watchdog driver
- DESCRIPTION:=Software watchdog driver
KCONFIG:=CONFIG_SOFT_WATCHDOG
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/softdog.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,softdog)
endef
-define KernelPackage/softdog/2.4
- FILES:=$(LINUX_DIR)/drivers/char/softdog.o
-endef
-
-define KernelPackage/softdog/2.6
- FILES:=$(LINUX_DIR)/drivers/char/watchdog/softdog.ko
+define KernelPackage/softdog/description
+ Software watchdog driver
endef
$(eval $(call KernelPackage,softdog))
-define KernelPackage/videodev
- SUBMENU:=$(EMENU)
- TITLE=Video4Linux support
- DESCRIPTION:=Kernel modules for Video4Linux support
- KCONFIG:=CONFIG_VIDEO_DEV
+define KernelPackage/leds-gpio
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=GPIO LED support
+ DEPENDS:= @GPIO_SUPPORT
+ KCONFIG:=CONFIG_LEDS_GPIO
+ FILES:=$(LINUX_DIR)/drivers/leds/leds-gpio.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,60,leds-gpio)
endef
-define KernelPackage/videodev/2.4
- FILES:=$(LINUX_DIR)/drivers/media/video/videodev.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,60,videodev)
+define KernelPackage/leds-gpio/description
+ Kernel module for LEDs on GPIO lines
endef
-define KernelPackage/videodev/2.6
- FILES:= \
- $(LINUX_DIR)/drivers/media/video/v4l2-common.$(LINUX_KMOD_SUFFIX) \
- $(if $(CONFIG_VIDEO_V4L1_COMPAT),$(LINUX_DIR)/drivers/media/video/v4l1-compat.$(LINUX_KMOD_SUFFIX)) \
- $(LINUX_DIR)/drivers/media/video/compat_ioctl32.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/media/video/videodev.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,60, \
- v4l2-common \
- $(if $(CONFIG_VIDEO_V4L1_COMPAT),v4l1-compat) \
- compat_ioctl32 \
- videodev \
- )
+$(eval $(call KernelPackage,leds-gpio))
+
+
+define KernelPackage/ledtrig-adm5120-switch
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=LED ADM5120 Switch Port Status Trigger
+ DEPENDS:=@TARGET_adm5120
+ KCONFIG:=CONFIG_LEDS_TRIGGER_ADM5120_SWITCH
+ FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-adm5120-switch.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,ledtrig-adm5120-switch)
endef
-$(eval $(call KernelPackage,videodev))
+define KernelPackage/ledtrig-adm5120-switch/description
+ Kernel module to allow LEDs to be controlled by the port states
+ of the ADM5120 built-in ethernet switch.
+endef
+
+$(eval $(call KernelPackage,ledtrig-adm5120-switch))
define KernelPackage/leds-net48xx
- SUBMENU:=$(EMENU)
+ SUBMENU:=$(OTHER_MENU)
TITLE:=Soekris Net48xx LED support
- DESCRIPTION:=Kernel module for Soekris Net48xx LEDs
- DEPENDS:=@LINUX_2_6_X86
+ DEPENDS:=@TARGET_x86 +kmod-scx200-gpio
KCONFIG:=CONFIG_LEDS_NET48XX
FILES:=$(LINUX_DIR)/drivers/leds/leds-net48xx.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,leds-net48xx)
endef
+define KernelPackage/leds-net48xx/description
+ Kernel module for Soekris Net48xx LEDs
+endef
+
$(eval $(call KernelPackage,leds-net48xx))
+define KernelPackage/leds-wrap
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=PCengines WRAP LED support
+ DEPENDS:=@TARGET_x86 +kmod-scx200-gpio
+ KCONFIG:=CONFIG_LEDS_WRAP
+ FILES:=$(LINUX_DIR)/drivers/leds/leds-wrap.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,leds-wrap)
+endef
+
+define KernelPackage/leds-wrap/description
+ Kernel module for PCengines WRAP LEDs
+endef
+
+$(eval $(call KernelPackage,leds-wrap))
+
+
+define KernelPackage/leds-alix
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=PCengines ALIX LED support
+ DEPENDS:=@TARGET_x86
+ KCONFIG:=CONFIG_LEDS_ALIX
+ FILES:=$(LINUX_DIR)/drivers/leds/leds-alix.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,leds-alix)
+endef
+
+define KernelPackage/leds-alix/description
+ Kernel module for PCengines ALIX LEDs
+endef
+
+$(eval $(call KernelPackage,leds-alix))
+
+
+define KernelPackage/ledtrig-netdev
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=LED NETDEV Trigger
+ KCONFIG:=CONFIG_LEDS_TRIGGER_NETDEV
+ FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-netdev.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,ledtrig-netdev)
+endef
+
+define KernelPackage/ledtrig-netdev/description
+ Kernel module to drive LEDs based on network activity.
+endef
+
+$(eval $(call KernelPackage,ledtrig-netdev))
+
+
+define KernelPackage/ledtrig-morse
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=LED Morse Trigger
+ KCONFIG:=CONFIG_LEDS_TRIGGER_MORSE
+ FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-morse.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,ledtrig-morse)
+endef
+
+define KernelPackage/ledtrig-morse/description
+ Kernel module to show morse coded messages on LEDs.
+endef
+
+$(eval $(call KernelPackage,ledtrig-morse))
+
+
+define KernelPackage/gpio-dev
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Generic GPIO char device support
+ DEPENDS:=@GPIO_SUPPORT
+ KCONFIG:=CONFIG_GPIO_DEVICE
+ FILES:=$(LINUX_DIR)/drivers/char/gpio_dev.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,40,gpio_dev)
+endef
+
+define KernelPackage/gpio-dev/description
+ Kernel module to allows control of GPIO pins using a character device.
+endef
+
+$(eval $(call KernelPackage,gpio-dev))
+
+
define KernelPackage/nsc-gpio
- SUBMENU:=$(EMENU)
+ SUBMENU:=$(OTHER_MENU)
TITLE:=Natsemi GPIO support
- DESCRIPTION:=Kernel module for Natsemi GPIO
- DEPENDS:=@LINUX_2_6_X86
+ DEPENDS:=@TARGET_x86
KCONFIG:=CONFIG_NSC_GPIO
FILES:=$(LINUX_DIR)/drivers/char/nsc_gpio.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,40,nsc_gpio)
endef
+define KernelPackage/nsc-gpio/description
+ Kernel module for Natsemi GPIO
+endef
+
$(eval $(call KernelPackage,nsc-gpio))
define KernelPackage/scx200-gpio
- SUBMENU:=$(EMENU)
+ SUBMENU:=$(OTHER_MENU)
TITLE:=Natsemi SCX200 GPIO support
- DESCRIPTION:=Kernel module for SCX200 GPIO
- DEPENDS:=kmod-nsc-gpio @LINUX_2_6_X86
+ DEPENDS:=@TARGET_x86 +kmod-nsc-gpio
KCONFIG:=CONFIG_SCx200_GPIO
FILES:=$(LINUX_DIR)/drivers/char/scx200_gpio.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,scx200_gpio)
endef
+define KernelPackage/scx200-gpio/description
+ Kernel module for SCX200 GPIO
+endef
+
$(eval $(call KernelPackage,scx200-gpio))
define KernelPackage/scx200-wdt
- SUBMENU:=$(EMENU)
+ SUBMENU:=$(OTHER_MENU)
TITLE:=Natsemi SCX200 Watchdog support
- DESCRIPTION:=Kernel module for SCX200 Watchdog
- DEPENDS:=@LINUX_2_6_X86
- KCONFIG:=CONFIG_SC1200_WDT
- FILES:=$(LINUX_DIR)/drivers/char/watchdog/scx200_wdt.$(LINUX_KMOD_SUFFIX)
+ DEPENDS:=@TARGET_x86
+ KCONFIG:=CONFIG_SCx200_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/scx200_wdt.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,scx200_wdt)
endef
+define KernelPackage/scx200-wdt/description
+ Kernel module for SCX200 Watchdog
+endef
+
$(eval $(call KernelPackage,scx200-wdt))
-define KernelPackage/hwmon
- SUBMENU:=$(EMENU)
- TITLE:=Hardware monitoring support
- DESCRIPTION:=Kernel modules for hardware monitoring
- DEPENDS:=@LINUX_2_6
- KCONFIG:= \
- CONFIG_HWMON \
- CONFIG_HWMON_VID \
- CONFIG_HWMON_DEBUG_CHIP=n
- FILES:= \
- $(LINUX_DIR)/drivers/hwmon/hwmon.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/hwmon/hwmon-vid.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,40,hwmon hwmon-vid)
+define KernelPackage/sc520-wdt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Natsemi SC520 Watchdog support
+ DEPENDS:=@TARGET_x86
+ KCONFIG:=CONFIG_SC520_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/sc520_wdt.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,sc520_wdt)
endef
-$(eval $(call KernelPackage,hwmon))
-
-
-define KernelPackage/hwmon-pc87360
- SUBMENU:=$(EMENU)
- TITLE:=PC87360 monitoring support
- DESCRIPTION:=Kernel modules for PC87360 chips
- DEPENDS:=kmod-hwmon
- KCONFIG:=CONFIG_SENSORS_PC87360
- FILES:=$(LINUX_DIR)/drivers/hwmon/pc87360.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,pc87360)
+define KernelPackage/sc520-wdt/description
+ Kernel module for SC520 Watchdog
endef
-$(eval $(call KernelPackage,hwmon-pc87360))
+$(eval $(call KernelPackage,sc520-wdt))
define KernelPackage/input-core
- SUBMENU:=$(EMENU)
+ SUBMENU:=$(OTHER_MENU)
TITLE:=Input device core
- DESCRIPTION:=Kernel modules for support of input device
DEPENDS:=@LINUX_2_6
KCONFIG:=CONFIG_INPUT
FILES:=$(LINUX_DIR)/drivers/input/input-core.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,50,input-core)
+ AUTOLOAD:=$(call AutoLoad,19,input-core)
+endef
+
+define KernelPackage/input-core/description
+ Kernel modules for support of input device
endef
$(eval $(call KernelPackage,input-core))
define KernelPackage/input-evdev
- SUBMENU:=$(EMENU)
- TITLE:=Input even device
- DESCRIPTION:=Kernel modules for support of input device events
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Input event device
DEPENDS:=+kmod-input-core
KCONFIG:=CONFIG_INPUT_EVDEV
FILES:=$(LINUX_DIR)/drivers/input/evdev.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,60,evdev)
endef
+define KernelPackage/input-evdev/description
+ Kernel modules for support of input device events
+endef
+
$(eval $(call KernelPackage,input-evdev))
+
+
+define KernelPackage/hid
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=HID Devices
+ DEPENDS:=+kmod-input-core +kmod-input-evdev
+ KCONFIG:=CONFIG_HID
+ FILES:=$(LINUX_DIR)/drivers/hid/hid.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,61,hid)
+endef
+
+define KernelPackage/hid/description
+ Kernel modules for HID devices
+endef
+
+$(eval $(call KernelPackage,hid))
+
+
+define KernelPackage/input-polldev
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Polled Input device support
+ DEPENDS:=+kmod-input-core @LINUX_2_6
+ KCONFIG:=CONFIG_INPUT_POLLDEV
+ FILES:=$(LINUX_DIR)/drivers/input/input-polldev.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,20,input-polldev)
+endef
+
+define KernelPackage/input-polldev/description
+ Kernel module for support of polled input devices
+endef
+
+$(eval $(call KernelPackage,input-polldev))
+
+
+define KernelPackage/input-gpio-keys
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=GPIO key support
+ DEPENDS:= @GPIO_SUPPORT +kmod-input-core
+ KCONFIG:=CONFIG_KEYBOARD_GPIO
+ FILES:=$(LINUX_DIR)/drivers/input/keyboard/gpio_keys.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,60,gpio_keys)
+endef
+
+define KernelPackage/input-gpio-keys/description
+ This driver implements support for buttons connected
+ to GPIO pins of various CPUs (and some other chips).
+endef
+
+$(eval $(call KernelPackage,input-gpio-keys))
+
+
+define KernelPackage/input-gpio-buttons
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Polled GPIO buttons input device
+ DEPENDS:=@GPIO_SUPPORT +kmod-input-polldev
+ KCONFIG:= \
+ CONFIG_INPUT_GPIO_BUTTONS \
+ CONFIG_INPUT_MISC=y
+ FILES:=$(LINUX_DIR)/drivers/input/misc/gpio_buttons.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,62,gpio_buttons)
+endef
+
+define KernelPackage/input-gpio-buttons/description
+ Kernel module for support polled GPIO buttons input device
+endef
+
+$(eval $(call KernelPackage,input-gpio-buttons))
+
+define KernelPackage/input-joydev
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Joystick device support
+ DEPENDS:=+kmod-input-core
+ KCONFIG:=CONFIG_INPUT_JOYDEV
+ FILES:=$(LINUX_DIR)/drivers/input/joydev.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,62,joydev)
+endef
+
+define KernelPackage/input-joydev/description
+ Kernel module for joystick support
+endef
+
+$(eval $(call KernelPackage,input-joydev))
+
+
+define KernelPackage/mmc-atmelmci
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Amtel MMC Support
+ DEPENDS:=@TARGET_avr32 +kmod-mmc
+ KCONFIG:=CONFIG_MMC_ATMELMCI
+ FILES:=$(LINUX_DIR)/drivers/mmc/host/atmel-mci.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,90,atmel-mci)
+endef
+
+define KernelPackage/mmc-atmelmci/description
+ Kernel support for Atmel Multimedia Card Interface.
+endef
+
+$(eval $(call KernelPackage,mmc-atmelmci))
+
+
+define KernelPackage/cs5535-gpio
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=AMD CS5535/CS5536 GPIO driver
+ DEPENDS:=@TARGET_x86||@TARGET_olpc
+ KCONFIG:=CONFIG_CS5535_GPIO
+ FILES:=$(LINUX_DIR)/drivers/char/cs5535_gpio.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,90,cs5535_gpio)
+endef
+
+define KernelPackage/cs5535-gpio/description
+ This package contains the AMD CS5535/CS5536 GPIO driver
+endef
+
+$(eval $(call KernelPackage,cs5535-gpio))
+
+
+define KernelPackage/textsearch
+SUBMENU:=$(OTHER_MENU)
+ TITLE:=Textsearch support is selected if needed
+ DEPENDS:=@LINUX_2_6 @!LINUX_2_6_21
+ KCONFIG:= \
+ CONFIG_TEXTSEARCH=y \
+ CONFIG_TEXTSEARCH_KMP \
+ CONFIG_TEXTSEARCH_BM \
+ CONFIG_TEXTSEARCH_FSM
+ FILES:= \
+ $(LINUX_DIR)/lib/ts_kmp.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/lib/ts_bm.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/lib/ts_fsm.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,20,ts_kmp ts_bm ts_fsm)
+endef
+
+$(eval $(call KernelPackage,textsearch))
+
+
+define KernelPackage/rfkill
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=RF switch subsystem support
+ DEPENDS:=@TARGET_x86||TARGET_olpc||TARGET_s3c24xx||TARGET_brcm47xx
+ KCONFIG:= \
+ CONFIG_RFKILL \
+ CONFIG_RFKILL_INPUT \
+ CONFIG_RFKILL_LEDS=y
+ FILES:= \
+ $(LINUX_DIR)/net/rfkill/rfkill.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/net/rfkill/rfkill-input.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,20,rfkill rfkill-input)
+endef
+
+define KernelPackage/rfkill/description
+ Say Y here if you want to have control over RF switches
+ found on many WiFi and Bluetooth cards.
+endef
+
+$(eval $(call KernelPackage,rfkill))
projects / openwrt.git / blobdiff