+# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
# see scripts/kbuild/config-language.txt.
menu "Networking Utilities"
+config BUSYBOX_CONFIG_NAMEIF
+ bool "nameif"
+ default n
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
+ select BUSYBOX_CONFIG_FEATURE_SYSLOG
+ help
+ nameif is used to rename network interface by its MAC address.
+ Renamed interfaces MUST be in the down state.
+ It is possible to use a file (default: /etc/mactab)
+ with list of new interface names and MACs.
+ Maximum interface name length: IFNAMSIZ = 16
+ File fields are separated by space or tab.
+ File format:
+ # Comment
+ new_interface_name XX:XX:XX:XX:XX:XX
+
+config BUSYBOX_CONFIG_FEATURE_NAMEIF_EXTENDED
+ bool "Extended nameif"
+ default n
+ depends on BUSYBOX_CONFIG_NAMEIF
+ help
+ This extends the nameif syntax to support the bus_info, driver,
+ phyaddr selectors. The syntax is compatible to the normal nameif.
+ File format:
+ new_interface_name driver=asix bus=usb-0000:00:08.2-3
+ new_interface_name bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5
+ new_interface_name phy_address=2 00:80:C8:38:91:B5
+ new_interface_name mac=00:80:C8:38:91:B5
+ new_interface_name 00:80:C8:38:91:B5
+config BUSYBOX_CONFIG_NBDCLIENT
+ bool "nbd-client"
+ default n
+ help
+ Network block device client
+config BUSYBOX_CONFIG_NC
+ bool "nc"
+ default y
+ help
+ A simple Unix utility which reads and writes data across network
+ connections.
+
+config BUSYBOX_CONFIG_NC_SERVER
+ bool "Netcat server options (-l)"
+ default n
+ depends on BUSYBOX_CONFIG_NC
+ help
+ Allow netcat to act as a server.
+
+config BUSYBOX_CONFIG_NC_EXTRA
+ bool "Netcat extensions (-eiw and filename)"
+ default n
+ depends on BUSYBOX_CONFIG_NC
+ help
+ Add -e (support for executing the rest of the command line after
+ making or receiving a successful connection), -i (delay interval for
+ lines sent), -w (timeout for initial connection).
+
+config BUSYBOX_CONFIG_NC_110_COMPAT
+ bool "Netcat 1.10 compatibility (+2.5k)"
+ default n # off specially for Rob
+ depends on BUSYBOX_CONFIG_NC
+ help
+ This option makes nc closely follow original nc-1.10.
+ The code is about 2.5k bigger. It enables
+ -s ADDR, -n, -u, -v, -o FILE, -z options, but loses
+ busybox-specific extensions: -f FILE and -ll.
+config BUSYBOX_CONFIG_PING
+ bool "ping"
+ default y
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
+ elicit an ICMP ECHO_RESPONSE from a host or gateway.
+
+config BUSYBOX_CONFIG_PING6
+ bool "ping6"
+ default y
+ depends on BUSYBOX_CONFIG_FEATURE_IPV6 && BUSYBOX_CONFIG_PING
+ help
+ This will give you a ping that can talk IPv6.
+
+config BUSYBOX_CONFIG_FEATURE_FANCY_PING
+ bool "Enable fancy ping output"
+ default y
+ depends on BUSYBOX_CONFIG_PING
+ help
+ Make the output from the ping applet include statistics, and at the
+ same time provide full support for ICMP packets.
+config BUSYBOX_CONFIG_WHOIS
+ bool "whois"
+ default n
+ help
+ whois is a client for the whois directory service
+
config BUSYBOX_CONFIG_FEATURE_IPV6
bool "Enable IPv6 support"
- default y
+ default IPV6
help
Enable IPv6 support in busybox.
This adds IPv6 support in the networking applets.
config BUSYBOX_CONFIG_ARP
bool "arp"
default n
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Manipulate the system ARP cache.
config BUSYBOX_CONFIG_ARPING
bool "arping"
default y
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Ping hosts by ARP packets.
config BUSYBOX_CONFIG_BRCTL
bool "brctl"
default y
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Manage ethernet bridges.
Supports addbr/delbr and addif/delif.
config BUSYBOX_CONFIG_ETHER_WAKE
bool "ether-wake"
default n
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Send a magic packet to wake up sleeping machines.
default n
depends on BUSYBOX_CONFIG_FTPD
help
- Some ftp-clients (among them KDE's Konqueror) issue illegal
- "LIST -la" requests. This option works around those problems.
+ Some ftp clients (among them KDE's Konqueror) issue illegal
+ "LIST -l" requests. This option works around such problems.
It might prevent you from listing files starting with "-" and
it increases the code size by ~40 bytes.
Most other ftp servers seem to behave similar to this.
Then a request to /url/myfile will be forwarded to
http://hostname[:port]/new/path/myfile.
+config BUSYBOX_CONFIG_FEATURE_HTTPD_GZIP
+ bool "Support for GZIP content encoding"
+ default n
+ depends on BUSYBOX_CONFIG_HTTPD
+ help
+ Makes httpd send files using GZIP content encoding if the
+ client supports it and a pre-compressed <file>.gz exists.
+
config BUSYBOX_CONFIG_IFCONFIG
bool "ifconfig"
default y
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Ifconfig is used to configure the kernel-resident network interfaces.
config BUSYBOX_CONFIG_IFENSLAVE
bool "ifenslave"
default n
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Userspace application to bind several interfaces
to a logical interface (use with kernel bonding driver).
config BUSYBOX_CONFIG_IFPLUGD
bool "ifplugd"
default n
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Network interface plug detection daemon.
bool "Use busybox ip applet"
default n
depends on BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
select BUSYBOX_CONFIG_IP
select BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
select BUSYBOX_CONFIG_FEATURE_IP_LINK
### UNUSED
###config FEATURE_IFUPDOWN_IPX
### bool "Support for IPX"
-### default n
+### default y
### depends on IFUPDOWN
### help
### If this option is selected you can use busybox to work with IPX
config BUSYBOX_CONFIG_IP
bool "ip"
default n
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
help
The "ip" applet is a TCP/IP interface configuration and routing
utility. You generally don't need "ip" to use busybox with
help
Support long options for the ipcalc applet.
-config BUSYBOX_CONFIG_NAMEIF
- bool "nameif"
- default n
- select BUSYBOX_CONFIG_FEATURE_SYSLOG
- help
- nameif is used to rename network interface by its MAC address.
- Renamed interfaces MUST be in the down state.
- It is possible to use a file (default: /etc/mactab)
- with list of new interface names and MACs.
- Maximum interface name length: IFNAMSIZ = 16
- File fields are separated by space or tab.
- File format:
- # Comment
- new_interface_name XX:XX:XX:XX:XX:XX
-
-config BUSYBOX_CONFIG_FEATURE_NAMEIF_EXTENDED
- bool "Extended nameif"
- default n
- depends on BUSYBOX_CONFIG_NAMEIF
- help
- This extends the nameif syntax to support the bus_info and driver
- checks. The syntax is compatible to the normal nameif.
- File format:
- new_interface_name driver=asix bus=usb-0000:00:08.2-3
- new_interface_name bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5
- new_interface_name mac=00:80:C8:38:91:B5
- new_interface_name 00:80:C8:38:91:B5
-
-config BUSYBOX_CONFIG_NC
- bool "nc"
- default y
- help
- A simple Unix utility which reads and writes data across network
- connections.
-
config BUSYBOX_CONFIG_NETMSG
bool "netmsg"
default y
help
simple program for sending udp broadcast messages
-config BUSYBOX_CONFIG_NC_SERVER
- bool "Netcat server options (-l)"
- default n
- depends on BUSYBOX_CONFIG_NC
- help
- Allow netcat to act as a server.
-
-config BUSYBOX_CONFIG_NC_EXTRA
- bool "Netcat extensions (-eiw and filename)"
- default n
- depends on BUSYBOX_CONFIG_NC
- help
- Add -e (support for executing the rest of the command line after
- making or receiving a successful connection), -i (delay interval for
- lines sent), -w (timeout for initial connection).
-
config BUSYBOX_CONFIG_NETSTAT
bool "netstat"
default y
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
help
netstat prints information about the Linux networking subsystem.
config BUSYBOX_CONFIG_NTPD
bool "ntpd"
- default n
+ default y
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
help
The NTP client/server daemon.
config BUSYBOX_CONFIG_FEATURE_NTPD_SERVER
bool "Make ntpd usable as a NTP server"
- default n
+ default y
depends on BUSYBOX_CONFIG_NTPD
help
Make ntpd usable as a NTP server. If you disable this option
ntpd will be usable only as a NTP client.
-config BUSYBOX_CONFIG_PING
- bool "ping"
- default y
- help
- ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
- elicit an ICMP ECHO_RESPONSE from a host or gateway.
-
-config BUSYBOX_CONFIG_PING6
- bool "ping6"
- default y
- depends on BUSYBOX_CONFIG_FEATURE_IPV6 && BUSYBOX_CONFIG_PING
- help
- This will give you a ping that can talk IPv6.
-
-config BUSYBOX_CONFIG_FEATURE_FANCY_PING
- bool "Enable fancy ping output"
- default y
- depends on BUSYBOX_CONFIG_PING
- help
- Make the output from the ping applet include statistics, and at the
- same time provide full support for ICMP packets.
-
config BUSYBOX_CONFIG_PSCAN
bool "pscan"
default n
config BUSYBOX_CONFIG_ROUTE
bool "route"
default y
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Route displays or manipulates the kernel's IP routing tables.
config BUSYBOX_CONFIG_SLATTACH
bool "slattach"
default n
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
help
slattach is a small utility to attach network interfaces to serial
lines.
#config TC
# bool "tc"
-# default n
+# default y
# help
# show / manipulate traffic control settings
#
# def_bool n
# depends on TC
+config BUSYBOX_CONFIG_TCPSVD
+ bool "tcpsvd"
+ default n
+ help
+ tcpsvd listens on a TCP port and runs a program for each new
+ connection.
+
config BUSYBOX_CONFIG_TELNET
bool "telnet"
default y
mount -t devpts devpts /dev/pts
- You need to be sure that Busybox has LOGIN and
+ You need to be sure that busybox has LOGIN and
FEATURE_SUID enabled. And finally, you should make
certain that Busybox has been installed setuid root:
In other words: it should be run from inetd in nowait mode,
or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR"
+comment "Common options for tftp/tftpd"
+ depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
+
config BUSYBOX_CONFIG_FEATURE_TFTP_GET
- bool "Enable \"get\" command"
+ bool "Enable 'tftp get' and/or tftpd upload code"
default n
depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
help
a client to retrieve a file from a TFTP server.
Also enable upload support in tftpd, if tftpd is selected.
+ Note: this option does _not_ make tftpd capable of download
+ (the usual operation people need from it)!
+
config BUSYBOX_CONFIG_FEATURE_TFTP_PUT
- bool "Enable \"put\" command"
+ bool "Enable 'tftp put' and/or tftpd download code"
default n
depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
help
config BUSYBOX_CONFIG_TRACEROUTE
bool "traceroute"
default y
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Utility to trace the route of IP packets.
help
Add option -I to use ICMP ECHO instead of UDP datagrams.
+config BUSYBOX_CONFIG_TUNCTL
+ bool "tunctl"
+ default n
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ tunctl creates or deletes tun devices.
+
+config BUSYBOX_CONFIG_FEATURE_TUNCTL_UG
+ bool "Support owner:group assignment"
+ default n
+ depends on BUSYBOX_CONFIG_TUNCTL
+ help
+ Allow to specify owner and group of newly created interface.
+ 340 bytes of pure bloat. Say no here.
+
source package/busybox/config/networking/udhcp/Config.in
config BUSYBOX_CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS
Intended to alter options not available in /etc/network/interfaces.
(IE: --syslog --background etc...)
+config BUSYBOX_CONFIG_UDPSVD
+ bool "udpsvd"
+ default n
+ help
+ udpsvd listens on an UDP port and runs a program for each new
+ connection.
+
config BUSYBOX_CONFIG_VCONFIG
bool "vconfig"
default y
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Creates, removes, and configures VLAN interfaces
help
Support long options for the wget applet.
+config BUSYBOX_CONFIG_FEATURE_WGET_TIMEOUT
+ bool "Enable read timeout option -T SEC"
+ default n
+ depends on BUSYBOX_CONFIG_WGET
+ help
+ Supports network read timeout for wget, so that wget will give
+ up and timeout when reading network data, through the -T command
+ line option. Currently only network data read timeout is
+ supported (i.e., timeout is not applied to the DNS nor TCP
+ connection initialization). When FEATURE_WGET_LONG_OPTIONS is
+ also enabled, the --timeout option will work in addition to -T.
+
config BUSYBOX_CONFIG_ZCIP
bool "zcip"
default n
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.
See http://www.zeroconf.org for further details, and "zcip.script"
in the busybox examples.
-config BUSYBOX_CONFIG_TCPSVD
- bool "tcpsvd"
- default n
- help
- tcpsvd listens on a TCP port and runs a program for each new
- connection.
-
-config BUSYBOX_CONFIG_TUNCTL
- bool "tunctl"
- default n
- help
- tunctl creates or deletes tun devices.
-
-config BUSYBOX_CONFIG_FEATURE_TUNCTL_UG
- bool "Support owner:group assignment"
- default n
- depends on BUSYBOX_CONFIG_TUNCTL
- help
- Allow to specify owner and group of newly created interface.
- 340 bytes of pure bloat. Say no here.
-
-config BUSYBOX_CONFIG_UDPSVD
- bool "udpsvd"
- default n
- help
- udpsvd listens on an UDP port and runs a program for each new
- connection.
-
endmenu
projects / openwrt.git / blobdiff