+# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
# see scripts/kbuild/config-language.txt.
menu "Archival Utilities"
+
+
+config BUSYBOX_CONFIG_FEATURE_SEAMLESS_XZ
+ bool "Make tar, rpm, modprobe etc understand .xz data"
+ default n
+ help
+ Make tar, rpm, modprobe etc understand .xz data.
+
config BUSYBOX_CONFIG_FEATURE_SEAMLESS_LZMA
bool "Make tar, rpm, modprobe etc understand .lzma data"
default n
config BUSYBOX_CONFIG_AR
bool "ar"
- default n
+ default n # needs to be improved to be able to replace binutils ar
help
ar is an archival utility program used to create, modify, and
extract contents from archives. An archive is a single file holding
probably say N here.
config BUSYBOX_CONFIG_FEATURE_AR_LONG_FILENAMES
- bool "Support for long filenames (not need for debs)"
+ bool "Support for long filenames (not needed for debs)"
default n
depends on BUSYBOX_CONFIG_AR
help
- By default the ar format can only store the first 15 characters of
- the filename, this option removes that limitation.
+ By default the ar format can only store the first 15 characters
+ of the filename, this option removes that limitation.
It supports the GNU ar long filename method which moves multiple long
filenames into a the data section of a new ar entry.
+config BUSYBOX_CONFIG_FEATURE_AR_CREATE
+ bool "Support archive creation"
+ default n
+ depends on BUSYBOX_CONFIG_AR
+ help
+ This enables archive creation (-c and -r) with busybox ar.
+
config BUSYBOX_CONFIG_BUNZIP2
bool "bunzip2"
default y
gzip is used to compress files.
It's probably the most widely used UNIX compression program.
+config BUSYBOX_CONFIG_FEATURE_GZIP_LONG_OPTIONS
+ bool "Enable long options"
+ default n
+ depends on BUSYBOX_CONFIG_GZIP && BUSYBOX_CONFIG_LONG_OPTS
+ help
+ Enable use of long options, increases size by about 106 Bytes
+
+config BUSYBOX_CONFIG_LZOP
+ bool "lzop"
+ default n
+ help
+ Lzop compression/decompresion.
+
+config BUSYBOX_CONFIG_LZOP_COMPR_HIGH
+ bool "lzop compression levels 7,8,9 (not very useful)"
+ default n
+ depends on BUSYBOX_CONFIG_LZOP
+ help
+ High levels (7,8,9) of lzop compression. These levels
+ are actually slower than gzip at equivalent compression ratios
+ and take up 3.2K of code.
+
config BUSYBOX_CONFIG_RPM2CPIO
bool "rpm2cpio"
default n
help
- Converts an RPM file into a CPIO archive.
+ Converts a RPM file into a CPIO archive.
config BUSYBOX_CONFIG_RPM
bool "rpm"
create compressed archives. It's probably the most widely used
UNIX archive program.
-if BUSYBOX_CONFIG_TAR
-
config BUSYBOX_CONFIG_FEATURE_TAR_CREATE
bool "Enable archive creation"
default y
tar archives using the `-c' option.
config BUSYBOX_CONFIG_FEATURE_TAR_AUTODETECT
- bool "Autodetect gz/bz2 compressed tarballs"
+ bool "Autodetect compressed tarballs"
default n
- depends on BUSYBOX_CONFIG_FEATURE_SEAMLESS_Z || BUSYBOX_CONFIG_FEATURE_SEAMLESS_GZ || BUSYBOX_CONFIG_FEATURE_SEAMLESS_BZ2 || BUSYBOX_CONFIG_FEATURE_SEAMLESS_LZMA
+ depends on BUSYBOX_CONFIG_TAR && (BUSYBOX_CONFIG_FEATURE_SEAMLESS_Z || BUSYBOX_CONFIG_FEATURE_SEAMLESS_GZ || BUSYBOX_CONFIG_FEATURE_SEAMLESS_BZ2 || BUSYBOX_CONFIG_FEATURE_SEAMLESS_LZMA || BUSYBOX_CONFIG_FEATURE_SEAMLESS_XZ)
help
- With this option tar can automatically detect gzip/bzip2 compressed
+ With this option tar can automatically detect compressed
tarballs. Currently it works only on files (not pipes etc).
config BUSYBOX_CONFIG_FEATURE_TAR_FROM
config BUSYBOX_CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY
bool "Support for old tar header format"
default n
- depends on BUSYBOX_CONFIG_TAR
+ depends on BUSYBOX_CONFIG_TAR || BUSYBOX_CONFIG_DPKG
help
This option is required to unpack archives created in
the old GNU format; help to kill this old format by
config BUSYBOX_CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY
bool "Enable untarring of tarballs with checksums produced by buggy Sun tar"
default n
- depends on BUSYBOX_CONFIG_TAR
+ depends on BUSYBOX_CONFIG_TAR || BUSYBOX_CONFIG_DPKG
help
This option is required to unpack archives created by some old
version of Sun's tar (it was calculating checksum using signed
config BUSYBOX_CONFIG_FEATURE_TAR_GNU_EXTENSIONS
bool "Support for GNU tar extensions (long filenames)"
default y
- depends on BUSYBOX_CONFIG_TAR
+ depends on BUSYBOX_CONFIG_TAR || BUSYBOX_CONFIG_DPKG
help
With this option busybox supports GNU long filenames and
linknames.
config BUSYBOX_CONFIG_FEATURE_TAR_LONG_OPTIONS
bool "Enable long options"
default n
- depends on BUSYBOX_CONFIG_TAR && BUSYBOX_CONFIG_GETOPT_LONG
+ depends on BUSYBOX_CONFIG_TAR && BUSYBOX_CONFIG_LONG_OPTS
help
Enable use of long options, increases size by about 400 Bytes
+config BUSYBOX_CONFIG_FEATURE_TAR_TO_COMMAND
+ bool "Support for writing to an external program"
+ default n
+ depends on BUSYBOX_CONFIG_TAR && BUSYBOX_CONFIG_FEATURE_TAR_LONG_OPTIONS
+ help
+ If you enable this option you'll be able to instruct tar to send
+ the contents of each extracted file to the standard input of an
+ external program.
+
config BUSYBOX_CONFIG_FEATURE_TAR_UNAME_GNAME
bool "Enable use of user and group names"
default n
listings (-t) and preserving permissions when unpacking (-p).
+200 bytes.
-endif #tar
+config BUSYBOX_CONFIG_FEATURE_TAR_NOPRESERVE_TIME
+ bool "Enable -m (do not preserve time) option"
+ default n
+ depends on BUSYBOX_CONFIG_TAR
+ help
+ With this option busybox supports GNU tar -m
+ (do not preserve time) option.
+
+config BUSYBOX_CONFIG_FEATURE_TAR_SELINUX
+ bool "Support for extracting SELinux labels"
+ default n
+ depends on BUSYBOX_CONFIG_TAR && BUSYBOX_CONFIG_SELINUX
+ help
+ With this option busybox supports restoring SELinux labels
+ when extracting files from tar archives.
config BUSYBOX_CONFIG_UNCOMPRESS
bool "uncompress"
default n
depends on BUSYBOX_CONFIG_UNLZMA
help
- This option reduces decompression time by about 33% at the cost of
- a 2K bigger binary.
+ This option reduces decompression time by about 25% at the cost of
+ a 1K bigger binary.
+
+config BUSYBOX_CONFIG_LZMA
+ bool "Provide lzma alias which supports only unpacking"
+ default n
+ depends on BUSYBOX_CONFIG_UNLZMA
+ help
+ Enable this option if you want commands like "lzma -d" to work.
+ IOW: you'll get lzma applet, but it will always require -d option.
+
+config BUSYBOX_CONFIG_UNXZ
+ bool "unxz"
+ default n
+ help
+ unxz is a unlzma successor.
+
+config BUSYBOX_CONFIG_XZ
+ bool "Provide xz alias which supports only unpacking"
+ default n
+ depends on BUSYBOX_CONFIG_UNXZ
+ help
+ Enable this option if you want commands like "xz -d" to work.
+ IOW: you'll get xz applet, but it will always require -d option.
config BUSYBOX_CONFIG_UNZIP
bool "unzip"
projects / openwrt.git / blobdiff