+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
# $Id$
include $(TOPDIR)/rules.mk
-include $(TOPDIR)/package/kernel.mk
+include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=madwifi
-PKG_VERSION:=0.9.0
-PKG_RELEASE:=1
-PKG_MD5SUM:=9b558d1df84cab2b0006c595feee0fba
+PKG_VERSION:=r2568-20070710
+PKG_BRANCH:=madwifi-ng
+PKG_RELEASE:=2
-PKG_SOURCE_URL:=@SF/$(PKG_NAME)
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
-PKG_CAT:=bzcat
+PKG_SOURCE:=$(PKG_BRANCH)-$(PKG_VERSION).tar.gz
+PKG_SOURCE_URL:=http://snapshots.madwifi.org/$(PKG_BRANCH)
+PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_BRANCH)-$(PKG_VERSION)
+PKG_MD5SUM:=fe5d41acd085d2c46934be3f8839e694
-PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+include $(INCLUDE_DIR)/package.mk
+
+RATE_CONTROL:=minstrel
ifeq ($(ARCH),mips)
HAL_TARGET:=mips-be-elf
ifeq ($(ARCH),armeb)
HAL_TARGET:=xscale-be-elf
endif
+ifeq ($(ARCH),arm)
+ HAL_TARGET:=xscale-le-elf
+endif
+ifeq ($(ARCH),powerpc)
+ HAL_TARGET:=powerpc-be-elf
+endif
-BUS := PCI
-ifneq ($(CONFIG_LINUX_2_4_AR531X),)
- BUS := AHB
+BUS:=PCI
+ifneq ($(CONFIG_LINUX_2_6_ATHEROS),)
+ BUS:=AHB
+ HAL_TARGET:=ap51
endif
ifneq ($(CONFIG_LINUX_2_6_ARUBA),)
- BUS := PCI AHB # no suitable HAL for AHB yet.
+ BUS:=PCI AHB # no suitable HAL for AHB yet.
endif
BUS_MODULES:=
BUS_MODULES+=$(PKG_BUILD_DIR)/ath/ath_pci.$(LINUX_KMOD_SUFFIX)
endif
+MADWIFI_AUTOLOAD:= \
+ wlan \
+ wlan_scan_ap \
+ wlan_scan_sta \
+ ath_hal \
+ ath_rate_$(RATE_CONTROL) \
+ wlan_acl \
+ wlan_ccmp \
+ wlan_tkip \
+ wlan_wep \
+ wlan_xauth
+
+ifeq ($(findstring AHB,$(BUS)),AHB)
+ MADWIFI_AUTOLOAD += ath_ahb
+endif
+ifeq ($(findstring PCI,$(BUS)),PCI)
+ MADWIFI_AUTOLOAD += ath_pci
+endif
+
+define KernelPackage/madwifi
+ SUBMENU:=Wireless Drivers
+ TITLE:=Driver for Atheros wireless chipsets
+ DEPENDS:=+wireless-tools @!LINUX_2_6_AVR32 @!LINUX_2_6_ETRAX
+ DESCRIPTION:=\
+ This package contains a driver for Atheros 802.11a/b/g chipsets.
+ URL:=http://madwifi.org/
+ VERSION:=$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE)
+ FILES:= \
+ $(PKG_BUILD_DIR)/ath_hal/ath_hal.$(LINUX_KMOD_SUFFIX) \
+ $(BUS_MODULES) \
+ $(PKG_BUILD_DIR)/ath_rate/$(RATE_CONTROL)/ath_rate_$(RATE_CONTROL).$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/net80211/wlan*.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,50,$(MADWIFI_AUTOLOAD))
+endef
+
MADWIFI_MAKEOPTS= -C $(PKG_BUILD_DIR) \
PATH="$(TARGET_PATH)" \
ARCH="$(LINUX_KARCH)" \
TOOLPREFIX="$(KERNEL_CROSS)" \
TOOLPATH="$(KERNEL_CROSS)" \
KERNELPATH="$(LINUX_DIR)" \
+ LDOPTS="--no-warn-mismatch " \
+ ATH_RATE="ath_rate/$(RATE_CONTROL)" \
+ WARNINGS="" \
DOMULTI=1
-include $(TOPDIR)/package/rules.mk
-
ifeq ($(findstring AHB,$(BUS)),AHB)
-define Build/Compile/ahb
- $(MAKE) $(MADWIFI_MAKEOPTS) BUS="AHB" all
-endef
+ define Build/Compile/ahb
+ COPTS="-DCONFIG_ATHEROS_RATE_DEFAULT='\"$(RATE_CONTROL)\"'" $(MAKE) $(MADWIFI_MAKEOPTS) BUS="AHB" modules
+ endef
endif
ifeq ($(findstring PCI,$(BUS)),PCI)
-define Build/Compile/pci
- $(MAKE) $(MADWIFI_MAKEOPTS) BUS="PCI" all
-endef
+ define Build/Compile/pci
+ COPTS="-DCONFIG_ATHEROS_RATE_DEFAULT='\"$(RATE_CONTROL)\"'" $(MAKE) $(MADWIFI_MAKEOPTS) BUS="PCI" modules
+ endef
endif
+define Build/Configure
+ $(SED) 's,-E[LB] ,,g' $(PKG_BUILD_DIR)/hal/public/*.inc
+endef
+
define Build/Compile
-$(call Build/Compile/ahb)
-$(call Build/Compile/pci)
+ $(call Build/Compile/ahb)
+ $(call Build/Compile/pci)
+ $(MAKE) $(MADWIFI_MAKEOPTS) \
+ CFLAGS="$(TARGET_CFLAGS)" \
+ tools
endef
define Build/InstallDev
endef
define Build/UninstallDev
- rm -rf $(STAGING_DIR)/usr/include/madwifi
-endef
-
-define Package/kmod-madwifi
- SECTION:=drivers
- CATEGORY:=Drivers
- DEFAULT:=y if LINUX_2_6_BRCM || LINUX_2_6_ARUBA || LINUX_2_4_AR531X || LINUX_2_6_XSCALE, m if ALL
- TITLE:=Driver for Atheros wireless chipsets
- DESCRIPTION:=Driver for Atheros 802.11a/b/g chipsets
- URL:=http://madwifi.org/
+ rm -rf $(STAGING_DIR)/usr/include/madwifi
endef
-define Package/kmod-madwifi/install
- mkdir -p $(1)/etc/modules.d
- mkdir -p $(1)/etc/init.d
- mkdir -p $(1)/lib/modules/$(LINUX_VERSION)
- mkdir -p $(1)/usr/sbin
- install -m0644 ./files/madwifi.modules $(1)/etc/modules.d/20-madwifi
-ifeq ($(findstring AHB,$(BUS)),AHB)
- echo ath_ahb >> $(1)/etc/modules.d/20-madwifi
-endif
-ifeq ($(findstring PCI,$(BUS)),PCI)
- echo ath_pci >> $(1)/etc/modules.d/20-madwifi
-endif
- install -m0755 ./files/madwifi.init $(1)/etc/init.d/S20madwifi
- $(CP) \
- $(PKG_BUILD_DIR)/ath_hal/ath_hal.$(LINUX_KMOD_SUFFIX) \
- $(BUS_MODULES) \
- $(PKG_BUILD_DIR)/ath_rate/sample/ath_rate_sample.$(LINUX_KMOD_SUFFIX) \
- $(PKG_BUILD_DIR)/net80211/*.$(LINUX_KMOD_SUFFIX) \
- $(1)/lib/modules/$(LINUX_VERSION)/
- $(CP) $(PKG_BUILD_DIR)/tools/{madwifi_multi,80211debug,80211stats,athchans,athctrl,athdebug,athkey,athstats,wlanconfig} $(1)/usr/sbin/
+define KernelPackage/madwifi/install
+ $(INSTALL_DIR) $(1)/lib/wifi
+ $(INSTALL_DATA) ./files/lib/wifi/madwifi.sh $(1)/lib/wifi
+ $(INSTALL_DIR) $(1)/usr/sbin
+ $(CP) $(PKG_BUILD_DIR)/tools/{madwifi_multi,80211stats,athchans,athctrl,athkey,athstats,wlanconfig} $(1)/usr/sbin/
endef
-$(eval $(call BuildPackage,kmod-madwifi))
+$(eval $(call KernelPackage,madwifi))
projects / openwrt.git / blobdiff