PKG_NAME:=mac80211
-PKG_VERSION:=2010-03-24
-PKG_RELEASE:=5
+PKG_VERSION:=2010-05-12
+PKG_RELEASE:=1
PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources
# http://www.orbit-lab.org/kernel/compat-wireless-2.6/2010/11 \
# http://wireless.kernel.org/download/compat-wireless-2.6
-PKG_MD5SUM:=73357c52b5d6888ea3228b2ca8aa5eca
+PKG_MD5SUM:=73e2aa6b917bdb0bae079433fe26a500
PKG_SOURCE:=compat-wireless-$(PKG_VERSION).tar.bz2
PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/compat-wireless-$(PKG_VERSION)
DEPENDS+= +kmod-crypto-core +kmod-crypto-arc4 +kmod-crypto-aes +kmod-cfg80211
FILES:= $(PKG_BUILD_DIR)/net/mac80211/mac80211.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,21,mac80211)
+ MENU:=1
endef
define KernelPackage/mac80211/config
- source "$(SOURCE)/Config.in"
+ menu "Configuration"
+ depends on PACKAGE_kmod-mac80211
+
+ config PACKAGE_MAC80211_DEBUGFS
+ bool "Export mac80211 internals in DebugFS"
+ default y
+ help
+ Select this to see extensive information about
+ the internal state of mac80211 in debugfs.
+
+ Say N unless you know you need this.
+
+ endmenu
endef
define KernelPackage/mac80211/description
TITLE+= (LIB)
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00lib.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,25,rt2x00lib)
+ MENU:=1
endef
define KernelPackage/rt2x00-lib/config
- source "$(SOURCE)/Config.in.rt2x00"
+ menu "Configuration"
+ depends PACKAGE_kmod-rt2x00-lib
+
+ config PACKAGE_RT2X00_LIB_DEBUGFS
+ bool "Enable rt2x00 debugfs support"
+ depends PACKAGE_MAC80211_DEBUGFS
+ help
+ Enable creation of debugfs files for the rt2x00 drivers.
+ These debugfs files support both reading and writing of the
+ most important register types of the rt2x00 hardware.
+
+ config PACKAGE_RT2X00_DEBUG
+ bool "Enable rt2x00 debug output"
+ help
+ Enable debugging output for all rt2x00 modules
+
+ endmenu
endef
define KernelPackage/rt2x00-pci
endef
define KernelPackage/ath/config
+ menu "Configuration"
+ depends on PACKAGE_kmod-ath
-config ATH_USER_REGD
- bool "Force Atheros drivers to respect the user's regdomain settings"
- depends on PACKAGE_kmod-ath
- help
- Atheros' idea of regulatory handling is that the EEPROM of the card defines
- the regulatory limits and the user is only allowed to restrict the settings
- even further, even if the country allows frequencies or power levels that
- are forbidden by the EEPROM settings.
- Select this option if you want the driver to respect the user's decision about
- regulatory settings.
-
-config PACKAGE_ATH_DEBUG
- bool "Atheros wireless debugging"
- depends on PACKAGE_kmod-ath
- help
- Say Y, if you want to debug atheros wireless drivers.
- Right now only ath9k makes use of this.
+ config ATH_USER_REGD
+ bool "Force Atheros drivers to respect the user's regdomain settings"
+ help
+ Atheros' idea of regulatory handling is that the EEPROM of the card defines
+ the regulatory limits and the user is only allowed to restrict the settings
+ even further, even if the country allows frequencies or power levels that
+ are forbidden by the EEPROM settings.
+
+ Select this option if you want the driver to respect the user's decision about
+ regulatory settings.
+
+ config PACKAGE_ATH_DEBUG
+ bool "Atheros wireless debugging"
+ help
+ Say Y, if you want to debug atheros wireless drivers.
+ Right now only ath9k makes use of this.
+
+ endmenu
endef
define KernelPackage/ath
DEPENDS+= @PCI_SUPPORT +kmod-mac80211
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,26,ath)
+ MENU:=1
endef
define KernelPackage/ath/description
$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_hw.$(LINUX_KMOD_SUFFIX) \
$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,27,ath9k_hw ath9k_common ath9k)
+ MENU:=1
endef
define KernelPackage/ath9k/description
endef
define KernelPackage/ath9k/config
- source "$(SOURCE)/Config.in.ath9k"
+ menu "Configuration"
+ depends PACKAGE_kmod-ath9k
+
+ config PACKAGE_ATH9K_USE_MINSTREL
+ bool "use the new minstrel_ht rate control for ath9k"
+ default y
+
+ endmenu
endef
USB8388FW_NAME:=usb8388
- ipw2200
endef
+
+define KernelPackage/mwl8k
+ $(call KernelPackage/mac80211/Default)
+ TITLE:=Driver for Marvell TOPDOG 802.11 Wireless cards
+ URL:=http://wireless.kernel.org/en/users/Drivers/mwl8k
+ DEPENDS+= @PCI_SUPPORT +kmod-mac80211
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/mwl8k.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,27,mwl8k)
+endef
+
+define KernelPackage/mwl8k/description
+ Kernel modules for Marvell TOPDOG 802.11 Wireless cards
+endef
+
#Broadcom firmware
ifneq ($(CONFIG_B43_EXPERIMENTAL),)
PKG_B43_FWV4_NAME:=broadcom-wl
PKG_B43_FWV4_VERSION:=4.178.10.4
- PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl.o
+ PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o
PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/
PKG_B43_FWV4_MD5SUM:=14477e8cbbb91b11896affac9b219fdb
PKG_B43_FWV3_SOURCE_URL:=http://downloads.openwrt.org/sources/
PKG_B43_FWV3_MD5SUM:=e08665c5c5b66beb9c3b2dd54aa80cb3
-ifneq ($(CONFIG_B43_OPENFIRMWARE),)
+ifeq ($(CONFIG_B43_OPENFIRMWARE),y)
PKG_B43_FWCUTTER_NAME:=b43-fwcutter
PKG_B43_FWCUTTER_VERSION:=3e69531aa65b8f664a0ab00dfc3e2eefeb0cb417
PKG_B43_FWCUTTER_SOURCE:=$(PKG_B43_FWCUTTER_NAME)-$(PKG_B43_FWCUTTER_VERSION).tar.bz2
PKG_B43_FWCUTTER_OBJECT:=$(PKG_B43_FWCUTTER_NAME)-$(PKG_B43_FWCUTTER_VERSION)/fwcutter/
else
PKG_B43_FWCUTTER_NAME:=b43-fwcutter
- PKG_B43_FWCUTTER_VERSION:=012
+ PKG_B43_FWCUTTER_VERSION:=013
PKG_B43_FWCUTTER_SOURCE:=$(PKG_B43_FWCUTTER_NAME)-$(PKG_B43_FWCUTTER_VERSION).tar.bz2
PKG_B43_FWCUTTER_PROTO:=default
PKG_B43_FWCUTTER_SOURCE_URL:=http://bu3sch.de/b43/fwcutter/
- PKG_B43_FWCUTTER_MD5SUM:=69eadf67b459f313a8d6b37aaabef96c
+ PKG_B43_FWCUTTER_MD5SUM:=3547ec6c474ac1bc2c4a5bb765b791a4
PKG_B43_FWCUTTER_SUBDIR:=b43-fwcutter-$(PKG_B43_FWCUTTER_VERSION)
PKG_B43_FWCUTTER_OBJECT:=$(PKG_B43_FWCUTTER_NAME)-$(PKG_B43_FWCUTTER_VERSION)/
endif
TITLE:=Broadcom 43xx wireless support
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/b43/b43.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,30,b43)
+ MENU:=1
endef
define KernelPackage/b43/config
- source "$(SOURCE)/Config.in.b43"
+ menu "Configuration"
+ depends on PACKAGE_kmod-b43
+
+ choice
+ prompt "b43 firmware version"
+ default B43_STABLE
+ help
+ This option allows you to select the version of the b43 firmware.
+
+ config B43_STABLE
+ bool "4.150.10.5 (stable)"
+ help
+ Stable firmware for BCM43xx devices.
+
+ If unsure, select this.
+
+ config B43_EXPERIMENTAL
+ bool "4.178.10.4 (experimental)"
+ help
+ Experimental firmware for BCM43xx devices.
+
+ This firmware is not tested as much as the "stable" firmware.
+
+ If unsure, select the "stable" firmware.
+
+ config B43_OPENFIRMWARE
+ bool "Open FirmWare for WiFi networks"
+ help
+ Opensource firmware for BCM43xx devices.
+
+ Do _not_ select this, unless you know what you are doing.
+ The Opensource firmware is not suitable for embedded devices, yet.
+ It does not support QoS, which is bad for AccessPoints.
+ It does not support hardware crypto acceleration, which is a showstopper
+ for embedded devices with low CPU resources.
+
+ If unsure, select the "stable" firmware.
+
+ endchoice
+
+ config B43_FW_SQUASH
+ bool "Remove unnecessary firmware files"
+ depends on !B43_OPENFIRMWARE
+ default y
+ help
+ This options allows you to remove unnecessary b43 firmware files
+ from the final rootfs image. This can reduce the rootfs size by
+ up to 200k.
+
+ If unsure, say Y.
+
+ config B43_FW_SQUASH_COREREVS
+ string "Core revisions to include"
+ depends on B43_FW_SQUASH
+ default "5,6,7,8,9,10,13,14,15"
+ help
+ This is a comma seperated list of core revision numbers.
+
+ Example (keep files for rev5 only):
+ 5
+
+ Example (keep files for rev5 and rev11):
+ 5,11
+
+ config B43_FW_SQUASH_PHYTYPES
+ string "PHY types to include"
+ depends on B43_FW_SQUASH
+ default "G,LP"
+ help
+ This is a comma seperated list of PHY types:
+ A => A-PHY
+ AG => Dual A-PHY G-PHY
+ G => G-PHY
+ LP => LP-PHY
+ N => N-PHY
+
+ Example (keep files for G-PHY only):
+ G
+
+ Example (keep files for G-PHY and N-PHY):
+ G,N
+
+ endmenu
endef
define KernelPackage/b43/description
TITLE:=Broadcom 43xx-legacy wireless support
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/b43legacy/b43legacy.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,30,b43legacy)
+ MENU:=1
endef
define KernelPackage/b43legacy/config
- source "$(SOURCE)/Config.in.b43legacy"
+ menu "Configuration"
+ depends on PACKAGE_kmod-b43legacy
+
+ config B43LEGACY_FW_SQUASH
+ bool "Remove unnecessary firmware files"
+ default y
+ help
+ This options allows you to remove unnecessary b43legacy firmware files
+ from the final rootfs image. This can reduce the rootfs size by
+ up to 50k.
+
+ If unsure, say Y.
+
+ config B43LEGACY_FW_SQUASH_COREREVS
+ string "Core revisions to include"
+ depends on B43LEGACY_FW_SQUASH
+ default "1,2,3,4"
+ help
+ This is a comma seperated list of core revision numbers.
+
+ Example (keep files for rev4 only):
+ 4
+
+ Example (keep files for rev2 and rev4):
+ 2,4
+
+ endmenu
endef
define KernelPackage/b43legacy/description
BUILDFLAGS:= \
-I$(PKG_BUILD_DIR)/include \
$(foreach opt,$(CONFOPTS),-DCONFIG_$(opt)) \
- $(if $(CONFIG_PCI),-DCONFIG_B43_PCI_AUTOSELECT -DCONFIG_B43_PCICORE_AUTOSELECT -DCONFIG_SSB_DRIVER_PCICORE_POSSIBLE -DCONFIG_SSB_DRIVER_PCICORE) \
- $(if $(CONFIG_PCI),-DCONFIG_SSB_PCIHOST_POSSIBLE -DCONFIG_SSB_PCIHOST) \
- $(if $(CONFIG_PCI),-DCONFIG_SSB_SPROM) \
+ $(if $(CONFIG_PCI),-DCONFIG_B43_PCI_AUTOSELECT -DCONFIG_B43_PCICORE_AUTOSELECT) \
$(if $(CONFIG_LEDS_TRIGGERS), -DCONFIG_MAC80211_LEDS -DCONFIG_LEDS_TRIGGERS -DCONFIG_B43_LEDS -DCONFIG_B43LEGACY_LEDS -DCONFIG_AR9170_LEDS) \
-DCONFIG_B43_HWRNG -DCONFIG_B43LEGACY_HWRNG \
$(if $(CONFIG_PACKAGE_MAC80211_DEBUGFS),-DCONFIG_MAC80211_DEBUGFS -DCONFIG_ATH9K_DEBUGFS) \
$(if $(CONFIG_PACKAGE_ATH_DEBUG),-DCONFIG_ATH_DEBUG) \
-D__CONFIG_MAC80211_RC_DEFAULT=minstrel \
+ -DCONFIG_MAC80211_RC_MINSTREL_HT \
$(if $(CONFIG_ATH_USER_REGD),-DATH_USER_REGD=1) \
$(if $(CONFIG_PACKAGE_ATH9K_USE_MINSTREL),-DATH9K_USE_MINSTREL) \
$(if $(CONFIG_PACKAGE_RT2X00_LIB_DEBUGFS),-DCONFIG_RT2X00_LIB_DEBUGFS) \
CONFIG_B43_PCMCIA=n CONFIG_B43_PIO=n \
CONFIG_B43_PCI_AUTOSELECT=$(if $(CONFIG_PCI),y) \
CONFIG_B43_PCICORE_AUTOSELECT=$(if $(CONFIG_PCI),y) \
- CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=$(if $(CONFIG_PCI),y) \
- CONFIG_SSB_DRIVER_PCICORE=$(if $(CONFIG_PCI),y) \
- CONFIG_SSB_PCIHOST_POSSIBLE=$(if $(CONFIG_PCI),y) \
- CONFIG_SSB_PCIHOST=$(if $(CONFIG_PCI),y) \
CONFIG_B43LEGACY_LEDS=$(CONFIG_LEDS_TRIGGERS) \
CONFIG_B43_LEDS=$(CONFIG_LEDS_TRIGGERS) \
CONFIG_B43_HWRNG=$(if $(CONFIG_HW_RANDOM),y) \
CONFIG_LIB80211_CRYPT_TKIP= \
CONFIG_IWLWIFI= \
CONFIG_IWLAGN= \
- CONFIG_MWL8K= \
+ CONFIG_MWL8K=$(if $(CONFIG_PACKAGE_kmod-mwl8k),m) \
CONFIG_ATMEL= \
CONFIG_PCMCIA_ATMEL= \
CONFIG_ADM8211= \
CONFIG_AR9170_LEDS=$(CONFIG_LEDS_TRIGGERS) \
CONFIG_IWM= \
CONFIG_ATH9K_HTC= \
+ CONFIG_MAC80211_RC_MINSTREL_HT=y \
MADWIFI= \
OLD_IWL= \
KLIB_BUILD="$(LINUX_DIR)" \
$(MAKE) -C "$(PKG_BUILD_DIR)/$(PKG_B43_FWCUTTER_OBJECT)" \
CFLAGS="-I$(STAGING_DIR_HOST)/include -include endian.h"
$(INSTALL_BIN) $(PKG_BUILD_DIR)/$(PKG_B43_FWCUTTER_OBJECT)/b43-fwcutter $(STAGING_DIR_HOST)/bin/
-ifneq ($(CONFIG_B43_OPENFIRMWARE),)
+ifeq ($(CONFIG_B43_OPENFIRMWARE),y)
$(INSTALL_DIR) $(STAGING_DIR_HOST)/bin/
$(MAKE) -C "$(PKG_BUILD_DIR)/$(PKG_B43_FWCUTTER_SUBDIR)/assembler/"
$(INSTALL_BIN) $(PKG_BUILD_DIR)/$(PKG_B43_FWCUTTER_SUBDIR)/assembler/b43-asm $(STAGING_DIR_HOST)/bin/
define KernelPackage/b43/install
rm -rf $(1)/lib/firmware/
$(call Build/b43-common)
-ifneq ($(CONFIG_B43_OPENFIRMWARE),)
+ifeq ($(CONFIG_B43_OPENFIRMWARE),y)
tar xzf "$(DL_DIR)/$(PKG_B43_FWV4_SOURCE)" -C "$(PKG_BUILD_DIR)"
else
tar xjf "$(DL_DIR)/$(PKG_B43_FWV4_SOURCE)" -C "$(PKG_BUILD_DIR)"
endif
$(INSTALL_DIR) $(1)/lib/firmware/
-ifneq ($(CONFIG_B43_OPENFIRMWARE),)
+ifeq ($(CONFIG_B43_OPENFIRMWARE),y)
$(MAKE) -C "$(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT)/"
$(INSTALL_DIR) $(1)/lib/firmware/b43-open/
$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT)/ucode5.fw $(1)/lib/firmware/b43-open/ucode5.fw
$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT)/b0g0bsinitvals5.fw $(1)/lib/firmware/b43-open/b0g0bsinitvals5.fw
$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT)/b0g0initvals5.fw $(1)/lib/firmware/b43-open/b0g0initvals5.fw
else
- b43-fwcutter --unsupported -w $(1)/lib/firmware/ $(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT)
+ b43-fwcutter -w $(1)/lib/firmware/ $(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT)
endif
ifneq ($(CONFIG_B43_FW_SQUASH),)
b43-fwsquash.py "$(CONFIG_B43_FW_SQUASH_PHYTYPES)" "$(CONFIG_B43_FW_SQUASH_COREREVS)" "$(1)/lib/firmware/b43"
$(eval $(call KernelPackage,net-libipw))
$(eval $(call KernelPackage,net-ipw2100))
$(eval $(call KernelPackage,net-ipw2200))
+$(eval $(call KernelPackage,mwl8k))
projects / openwrt.git / blobdiff