firmware-utils/mkzynfw: add support for the NBG460N board

[openwrt.git] / package / busybox / config / util-linux / Config.in

diff --git a/package/busybox/config/util-linux/Config.in b/package/busybox/config/util-linux/Config.in
index af47358..a4fbc0c 100644 (file)
--- a/package/busybox/config/util-linux/Config.in
+++ b/package/busybox/config/util-linux/Config.in
@@ -5,41 +5,91 @@
 
 menu "Linux System Utilities"
 
 
 menu "Linux System Utilities"
 

+config BUSYBOX_CONFIG_ACPID
+       bool "acpid"
+       default n
+       help
+         acpid listens to ACPI events coming either in textual form from
+         /proc/acpi/event (though it is marked deprecated it is still widely
+         used and _is_ a standard) or in binary form from specified evdevs
+         (just use /dev/input/event*).
+
+         It parses the event to retrieve ACTION and a possible PARAMETER.
+         It then spawns /etc/acpi/<ACTION>[/<PARAMETER>] either via run-parts
+         (if the resulting path is a directory) or directly as an executable.
+
+         N.B. acpid relies on run-parts so have the latter installed.
+
+config BUSYBOX_CONFIG_FEATURE_ACPID_COMPAT
+       bool "Accept and ignore redundant options"
+       default n
+       depends on BUSYBOX_CONFIG_ACPID
+       help
+         Accept and ignore compatibility options -g -m -s -S -v.
+
+config BUSYBOX_CONFIG_BLKID
+       bool "blkid"
+       default y
+       select BUSYBOX_CONFIG_VOLUMEID
+       help
+         Lists labels and UUIDs of all filesystems.
+         WARNING:
+         With all submodules selected, it will add ~8k to busybox.

 
 config BUSYBOX_CONFIG_DMESG
        bool "dmesg"
        default y
        help
 
 config BUSYBOX_CONFIG_DMESG
        bool "dmesg"
        default y
        help

-         dmesg is used to examine or control the kernel ring buffer.  When the
+         dmesg is used to examine or control the kernel ring buffer. When the

          Linux kernel prints messages to the system log, they are stored in
          Linux kernel prints messages to the system log, they are stored in

-         the kernel ring buffer.  You can use dmesg to print the kernel's ring
+         the kernel ring buffer. You can use dmesg to print the kernel's ring

          buffer, clear the kernel ring buffer, change the size of the kernel
          ring buffer, and change the priority level at which kernel messages
          buffer, clear the kernel ring buffer, change the size of the kernel
          ring buffer, and change the priority level at which kernel messages

-         are also logged to the system console.  Enable this option if you
+         are also logged to the system console. Enable this option if you

          wish to enable the 'dmesg' utility.
 
          wish to enable the 'dmesg' utility.
 

+config BUSYBOX_CONFIG_FEATURE_DMESG_PRETTY
+       bool "Pretty dmesg output"
+       default y
+       depends on BUSYBOX_CONFIG_DMESG
+       help
+         If you wish to scrub the syslog level from the output, say 'Y' here.
+         The syslog level is a string prefixed to every line with the form
+         "<#>".
+
+         With this option you will see:
+           # dmesg
+           Linux version 2.6.17.4 .....
+           BIOS-provided physical RAM map:
+            BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
+
+         Without this option you will see:
+           # dmesg
+           <5>Linux version 2.6.17.4 .....
+           <6>BIOS-provided physical RAM map:
+           <6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
+

 config BUSYBOX_CONFIG_FBSET
        bool "fbset"
        default n
        help
          fbset is used to show or change the settings of a Linux frame buffer
 config BUSYBOX_CONFIG_FBSET
        bool "fbset"
        default n
        help
          fbset is used to show or change the settings of a Linux frame buffer

-         device.  The frame buffer device provides a simple and unique
-         interface to access a graphics display.  Enable this option
+         device. The frame buffer device provides a simple and unique
+         interface to access a graphics display. Enable this option

          if you wish to enable the 'fbset' utility.
 
          if you wish to enable the 'fbset' utility.
 

-

 config BUSYBOX_CONFIG_FEATURE_FBSET_FANCY
 config BUSYBOX_CONFIG_FEATURE_FBSET_FANCY

-       bool "  Turn on extra fbset options"
+       bool "Turn on extra fbset options"

        default n
        depends on BUSYBOX_CONFIG_FBSET
        help
          This option enables extended fbset options, allowing one to set the
        default n
        depends on BUSYBOX_CONFIG_FBSET
        help
          This option enables extended fbset options, allowing one to set the

-         framebuffer size, color depth, etc.  interface to access a graphics
-         display.  Enable this option if you wish to enable extended fbset
+         framebuffer size, color depth, etc. interface to access a graphics
+         display. Enable this option if you wish to enable extended fbset

          options.
 
 config BUSYBOX_CONFIG_FEATURE_FBSET_READMODE
          options.
 
 config BUSYBOX_CONFIG_FEATURE_FBSET_READMODE

-       bool "  Turn on fbset readmode support"
+       bool "Turn on fbset readmode support"

        default n
        depends on BUSYBOX_CONFIG_FBSET
        help
        default n
        depends on BUSYBOX_CONFIG_FBSET
        help


@@ -52,11 +102,11 @@ config BUSYBOX_CONFIG_FDFLUSH
        default n
        help
          fdflush is only needed when changing media on slightly-broken
        default n
        help
          fdflush is only needed when changing media on slightly-broken

-         removable media drives.  It is used to make Linux believe that a
+         removable media drives. It is used to make Linux believe that a

          hardware disk-change switch has been actuated, which causes Linux to
          hardware disk-change switch has been actuated, which causes Linux to

-         forget anything it has cached from the previous media.  If you have
+         forget anything it has cached from the previous media. If you have

          such a slightly-broken drive, you will need to run fdflush every time
          such a slightly-broken drive, you will need to run fdflush every time

-         you change a disk.  Most people have working hardware and can safely
+         you change a disk. Most people have working hardware and can safely

          leave this disabled.
 
 config BUSYBOX_CONFIG_FDFORMAT
          leave this disabled.
 
 config BUSYBOX_CONFIG_FDFORMAT


@@ -70,28 +120,28 @@ config BUSYBOX_CONFIG_FDISK
        default n
        help
          The fdisk utility is used to divide hard disks into one or more
        default n
        help
          The fdisk utility is used to divide hard disks into one or more

-         logical disks, which are generally called partitions.  This utility
+         logical disks, which are generally called partitions. This utility

          can be used to list and edit the set of partitions or BSD style
          'disk slices' that are defined on a hard drive.
 
          can be used to list and edit the set of partitions or BSD style
          'disk slices' that are defined on a hard drive.
 

-config BUSYBOX_FDISK_SUPPORT_LARGE_DISKS
-       bool
+config BUSYBOX_CONFIG_FDISK_SUPPORT_LARGE_DISKS
+       bool "Support over 4GB disks"

        default y
        depends on BUSYBOX_CONFIG_FDISK
        help
          Enable this option to support large disks > 4GB.
 
 config BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
        default y
        depends on BUSYBOX_CONFIG_FDISK
        help
          Enable this option to support large disks > 4GB.
 
 config BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE

-       bool "  Write support"
+       bool "Write support"

        default n
        depends on BUSYBOX_CONFIG_FDISK
        help
          Enabling this option allows you to create or change a partition table
        default n
        depends on BUSYBOX_CONFIG_FDISK
        help
          Enabling this option allows you to create or change a partition table

-         and write those changes out to disk.  If you leave this option
+         and write those changes out to disk. If you leave this option

          disabled, you will only be able to view the partition table.
 
 config BUSYBOX_CONFIG_FEATURE_AIX_LABEL
          disabled, you will only be able to view the partition table.
 
 config BUSYBOX_CONFIG_FEATURE_AIX_LABEL

-       bool "  Support AIX disklabels"
+       bool "Support AIX disklabels"

        default n
        depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
        help
        default n
        depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
        help


@@ -99,7 +149,7 @@ config BUSYBOX_CONFIG_FEATURE_AIX_LABEL
          Most people can safely leave this option disabled.
 
 config BUSYBOX_CONFIG_FEATURE_SGI_LABEL
          Most people can safely leave this option disabled.
 
 config BUSYBOX_CONFIG_FEATURE_SGI_LABEL

-       bool "  Support SGI disklabels"
+       bool "Support SGI disklabels"

        default n
        depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
        help
        default n
        depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
        help


@@ -107,15 +157,15 @@ config BUSYBOX_CONFIG_FEATURE_SGI_LABEL
          Most people can safely leave this option disabled.
 
 config BUSYBOX_CONFIG_FEATURE_SUN_LABEL
          Most people can safely leave this option disabled.
 
 config BUSYBOX_CONFIG_FEATURE_SUN_LABEL

-       bool "  Support SUN disklabels"
+       bool "Support SUN disklabels"

        default n
        default n

-       depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
+       depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE

        help
          Enabling this option allows you to create or change SUN disklabels.
          Most people can safely leave this option disabled.
 
 config BUSYBOX_CONFIG_FEATURE_OSF_LABEL
        help
          Enabling this option allows you to create or change SUN disklabels.
          Most people can safely leave this option disabled.
 
 config BUSYBOX_CONFIG_FEATURE_OSF_LABEL

-       bool "  Support BSD disklabels"
+       bool "Support BSD disklabels"

        default n
        depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
        help
        default n
        depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
        help


@@ -123,24 +173,33 @@ config BUSYBOX_CONFIG_FEATURE_OSF_LABEL
          and define and edit BSD disk slices.
 
 config BUSYBOX_CONFIG_FEATURE_FDISK_ADVANCED
          and define and edit BSD disk slices.
 
 config BUSYBOX_CONFIG_FEATURE_FDISK_ADVANCED

-       bool "  Support expert mode"
+       bool "Support expert mode"

        default n
        depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
        help
          Enabling this option allows you to do terribly unsafe things like
          define arbitrary drive geometry, move the beginning of data in a
        default n
        depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
        help
          Enabling this option allows you to do terribly unsafe things like
          define arbitrary drive geometry, move the beginning of data in a

-         partition, and similarly evil things.  Unless you have a very good
+         partition, and similarly evil things. Unless you have a very good

          reason you would be wise to leave this disabled.
 
          reason you would be wise to leave this disabled.
 

+config BUSYBOX_CONFIG_FINDFS
+       bool "findfs"
+       default n
+       select BUSYBOX_CONFIG_VOLUMEID
+       help
+         Prints the name of a filesystem with given label or UUID.
+         WARNING:
+         With all submodules selected, it will add ~8k to busybox.
+

 config BUSYBOX_CONFIG_FREERAMDISK
        bool "freeramdisk"
        default n
        help
 config BUSYBOX_CONFIG_FREERAMDISK
        bool "freeramdisk"
        default n
        help

-         Linux allows you to create ramdisks.  This utility allows you to
+         Linux allows you to create ramdisks. This utility allows you to

          delete them and completely free all memory that was used for the
          delete them and completely free all memory that was used for the

-         ramdisk.  For example, if you boot Linux into a ramdisk and later
+         ramdisk. For example, if you boot Linux into a ramdisk and later

          pivot_root, you may want to free the memory that is allocated to the
          pivot_root, you may want to free the memory that is allocated to the

-         ramdisk.  If you have no use for freeing memory from a ramdisk, leave
+         ramdisk. If you have no use for freeing memory from a ramdisk, leave

          this disabled.
 
 config BUSYBOX_CONFIG_FSCK_MINIX
          this disabled.
 
 config BUSYBOX_CONFIG_FSCK_MINIX


@@ -148,31 +207,49 @@ config BUSYBOX_CONFIG_FSCK_MINIX
        default n
        help
          The minix filesystem is a nice, small, compact, read-write filesystem
        default n
        help
          The minix filesystem is a nice, small, compact, read-write filesystem

-         with little overhead.  It is not a journaling filesystem however and
+         with little overhead. It is not a journaling filesystem however and

          can experience corruption if it is not properly unmounted or if the
          can experience corruption if it is not properly unmounted or if the

-         power goes off in the middle of a write.  This utility allows you to
+         power goes off in the middle of a write. This utility allows you to

          check for and attempt to repair any corruption that occurs to a minix
          filesystem.
 
          check for and attempt to repair any corruption that occurs to a minix
          filesystem.
 

+config BUSYBOX_CONFIG_MKFS_EXT2
+       bool "mkfs_ext2"
+       default n
+       help
+         Utility to create EXT2 filesystems.
+

 config BUSYBOX_CONFIG_MKFS_MINIX
        bool "mkfs_minix"
        default n
        help
          The minix filesystem is a nice, small, compact, read-write filesystem
 config BUSYBOX_CONFIG_MKFS_MINIX
        bool "mkfs_minix"
        default n
        help
          The minix filesystem is a nice, small, compact, read-write filesystem

-         with little overhead.  If you wish to be able to create minix filesystems
-         this utility will do the job for you.
+         with little overhead. If you wish to be able to create minix
+         filesystems this utility will do the job for you.

 
 comment "Minix filesystem support"
 
 comment "Minix filesystem support"

-    depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX
+       depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX

 
 config BUSYBOX_CONFIG_FEATURE_MINIX2
 
 config BUSYBOX_CONFIG_FEATURE_MINIX2

-       bool "  Support Minix fs v2 (fsck_minix/mkfs_minix)"
+       bool "Support Minix fs v2 (fsck_minix/mkfs_minix)"

        default n
        depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX
        help
        default n
        depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX
        help

-         If you wish to be able to create version 2 minix filesystems, enable this.
-         If you enabled 'mkfs_minix' then you almost certainly want to be using the
-         version 2 filesystem support.
+         If you wish to be able to create version 2 minix filesystems, enable
+         this. If you enabled 'mkfs_minix' then you almost certainly want to
+         be using the version 2 filesystem support.
+
+config BUSYBOX_CONFIG_MKFS_REISER
+       bool "mkfs_reiser"
+       default n
+       help
+         Utility to create ReiserFS filesystems.
+
+config BUSYBOX_CONFIG_MKFS_VFAT
+       bool "mkfs_vfat"
+       default n
+       help
+         Utility to create FAT32 filesystems.

 
 config BUSYBOX_CONFIG_GETOPT
        bool "getopt"
 
 config BUSYBOX_CONFIG_GETOPT
        bool "getopt"


@@ -180,11 +257,18 @@ config BUSYBOX_CONFIG_GETOPT
        help
          The getopt utility is used to break up (parse) options in command
          lines to make it easy to write complex shell scripts that also check
        help
          The getopt utility is used to break up (parse) options in command
          lines to make it easy to write complex shell scripts that also check

-         for legal (and illegal) options.  If you want to write horribly
+         for legal (and illegal) options. If you want to write horribly

          complex shell scripts, or use some horribly complex shell script
          complex shell scripts, or use some horribly complex shell script

-         written by others, this utility may be for you.  Most people will
+         written by others, this utility may be for you. Most people will

          wisely leave this disabled.
 
          wisely leave this disabled.
 

+config BUSYBOX_CONFIG_FEATURE_GETOPT_LONG
+       bool "Support option -l"
+       default n if BUSYBOX_CONFIG_LONG_OPTS
+       depends on BUSYBOX_CONFIG_GETOPT
+       help
+         Enable support for long options (option -l).
+

 config BUSYBOX_CONFIG_HEXDUMP
        bool "hexdump"
        default y
 config BUSYBOX_CONFIG_HEXDUMP
        bool "hexdump"
        default y


@@ -192,75 +276,503 @@ config BUSYBOX_CONFIG_HEXDUMP
          The hexdump utility is used to display binary data in a readable
          way that is comparable to the output from most hex editors.
 
          The hexdump utility is used to display binary data in a readable
          way that is comparable to the output from most hex editors.
 

+config BUSYBOX_CONFIG_FEATURE_HEXDUMP_REVERSE
+       bool "Support -R, reverse of 'hexdump -Cv'"
+       default n
+       depends on BUSYBOX_CONFIG_HEXDUMP
+       help
+         The hexdump utility is used to display binary data in an ascii
+         readable way. This option creates binary data from an ascii input.
+         NB: this option is non-standard. It's unwise to use it in scripts
+         aimed to be portable.
+
+config BUSYBOX_CONFIG_HD
+       bool "hd"
+       default n
+       select BUSYBOX_CONFIG_HEXDUMP
+       help
+         hd is an alias to hexdump -C.
+

 config BUSYBOX_CONFIG_HWCLOCK
        bool "hwclock"
 config BUSYBOX_CONFIG_HWCLOCK
        bool "hwclock"

-       default n
+       default y

        help
          The hwclock utility is used to read and set the hardware clock
        help
          The hwclock utility is used to read and set the hardware clock

-         on a system.  This is primarily used to set the current time on
+         on a system. This is primarily used to set the current time on

          shutdown in the hardware clock, so the hardware will keep the
          correct time when Linux is _not_ running.
 
          shutdown in the hardware clock, so the hardware will keep the
          correct time when Linux is _not_ running.
 

-config BUSYBOX_CONFIG_FEATURE_HWCLOCK_LONGOPTIONS
-       bool "  Support long options (--hctosys,...)"
+config BUSYBOX_CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS
+       bool "Support long options (--hctosys,...)"

        default n
        default n

-       depends on BUSYBOX_CONFIG_HWCLOCK
+       depends on BUSYBOX_CONFIG_HWCLOCK && BUSYBOX_CONFIG_LONG_OPTS

        help
        help

-         By default, the hwclock utility only uses short options.  If you
+         By default, the hwclock utility only uses short options. If you

          are overly fond of its long options, such as --hctosys, --utc, etc)
          then enable this option.
 
          are overly fond of its long options, such as --hctosys, --utc, etc)
          then enable this option.
 

+config BUSYBOX_CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS
+       bool "Use FHS /var/lib/hwclock/adjtime"
+       default n
+       depends on BUSYBOX_CONFIG_HWCLOCK
+       help
+         Starting with FHS 2.3, the adjtime state file is supposed to exist
+         at /var/lib/hwclock/adjtime instead of /etc/adjtime. If you wish
+         to use the FHS behavior, answer Y here, otherwise answer N for the
+         classic /etc/adjtime path.
+
+         pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO
+
+config BUSYBOX_CONFIG_IPCRM
+       bool "ipcrm"
+       default n
+       select BUSYBOX_CONFIG_FEATURE_SUID
+       help
+         The ipcrm utility allows the removal of System V interprocess
+         communication (IPC) objects and the associated data structures
+         from the system.
+
+config BUSYBOX_CONFIG_IPCS
+       bool "ipcs"
+       default n
+       select BUSYBOX_CONFIG_FEATURE_SUID
+       help
+         The ipcs utility is used to provide information on the currently
+         allocated System V interprocess (IPC) objects in the system.
+

 config BUSYBOX_CONFIG_LOSETUP
        bool "losetup"
        default n
        help
          losetup is used to associate or detach a loop device with a regular
 config BUSYBOX_CONFIG_LOSETUP
        bool "losetup"
        default n
        help
          losetup is used to associate or detach a loop device with a regular

-         file or block device, and to query the status of a loop device.  This
+         file or block device, and to query the status of a loop device. This

          version does not currently support enabling data encryption.
 
          version does not currently support enabling data encryption.
 

+config BUSYBOX_CONFIG_LSPCI
+       bool "lspci"
+       default n
+       help
+         lspci is a utility for displaying information about PCI buses in the
+         system and devices connected to them.
+
+         This version uses sysfs (/sys/bus/pci/devices) only.
+
+config BUSYBOX_CONFIG_LSUSB
+       bool "lsusb"
+       default n
+       help
+         lsusb is a utility for displaying information about USB buses in the
+         system and devices connected to them.
+
+         This version uses sysfs (/sys/bus/usb/devices) only.
+
+config BUSYBOX_CONFIG_MDEV
+       bool "mdev"
+       default n
+       help
+         mdev is a mini-udev implementation for dynamically creating device
+         nodes in the /dev directory.
+
+         For more information, please see docs/mdev.txt
+
+config BUSYBOX_CONFIG_FEATURE_MDEV_CONF
+       bool "Support /etc/mdev.conf"
+       default n
+       depends on BUSYBOX_CONFIG_MDEV
+       help
+         Add support for the mdev config file to control ownership and
+         permissions of the device nodes.
+
+         For more information, please see docs/mdev.txt
+
+config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME
+       bool "Support subdirs/symlinks"
+       default n
+       depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF
+       help
+         Add support for renaming devices and creating symlinks.
+
+         For more information, please see docs/mdev.txt
+
+config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME_REGEXP
+       bool "Support regular expressions substitutions when renaming device"
+       default n
+       depends on BUSYBOX_CONFIG_FEATURE_MDEV_RENAME
+       help
+         Add support for regular expressions substitutions when renaming
+         device.
+
+config BUSYBOX_CONFIG_FEATURE_MDEV_EXEC
+       bool "Support command execution at device addition/removal"
+       default n
+       depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF
+       help
+         This adds support for an optional field to /etc/mdev.conf for
+         executing commands when devices are created/removed.
+
+         For more information, please see docs/mdev.txt
+
+config BUSYBOX_CONFIG_FEATURE_MDEV_LOAD_FIRMWARE
+       bool "Support loading of firmwares"
+       default n
+       depends on BUSYBOX_CONFIG_MDEV
+       help
+         Some devices need to load firmware before they can be usable.
+
+         These devices will request userspace look up the files in
+         /lib/firmware/ and if it exists, send it to the kernel for
+         loading into the hardware.
+

 config BUSYBOX_CONFIG_MKSWAP
        bool "mkswap"
 config BUSYBOX_CONFIG_MKSWAP
        bool "mkswap"

-       default n
+       default y

        help
          The mkswap utility is used to configure a file or disk partition as
        help
          The mkswap utility is used to configure a file or disk partition as

-         Linux swap space.  This allows Linux to use the entire file or
+         Linux swap space. This allows Linux to use the entire file or

          partition as if it were additional RAM, which can greatly increase
          partition as if it were additional RAM, which can greatly increase

-         the capability of low-memory machines.  This additional memory is
+         the capability of low-memory machines. This additional memory is

          much slower than real RAM, but can be very helpful at preventing your
          applications being killed by the Linux out of memory (OOM) killer.
          Once you have created swap space using 'mkswap' you need to enable
          the swap space using the 'swapon' utility.
 
          much slower than real RAM, but can be very helpful at preventing your
          applications being killed by the Linux out of memory (OOM) killer.
          Once you have created swap space using 'mkswap' you need to enable
          the swap space using the 'swapon' utility.
 

+config BUSYBOX_CONFIG_FEATURE_MKSWAP_UUID
+       bool "UUID support"
+       default y
+       depends on BUSYBOX_CONFIG_MKSWAP
+       help
+         Generate swap spaces with universally unique identifiers.
+

 config BUSYBOX_CONFIG_MORE
        bool "more"
 config BUSYBOX_CONFIG_MORE
        bool "more"

-       default y
+       default n

        help
          more is a simple utility which allows you to read text one screen
        help
          more is a simple utility which allows you to read text one screen

-         sized page at a time.  If you want to read text that is larger than
+         sized page at a time. If you want to read text that is larger than

          the screen, and you are using anything faster than a 300 baud modem,
          the screen, and you are using anything faster than a 300 baud modem,

-         you will probably find this utility very helpful.  If you don't have
+         you will probably find this utility very helpful. If you don't have

          any need to reading text files, you can leave this disabled.
 
 config BUSYBOX_CONFIG_FEATURE_USE_TERMIOS
          any need to reading text files, you can leave this disabled.
 
 config BUSYBOX_CONFIG_FEATURE_USE_TERMIOS

-       bool "  Use termios to manipulate the screen"
-       default y
-       depends on BUSYBOX_CONFIG_MORE
+       bool "Use termios to manipulate the screen"
+       default n
+       depends on BUSYBOX_CONFIG_MORE || BUSYBOX_CONFIG_TOP

        help
          This option allows utilities such as 'more' and 'top' to determine
        help
          This option allows utilities such as 'more' and 'top' to determine

-         the size of the screen.  If you leave this disabled, your utilities
+         the size of the screen. If you leave this disabled, your utilities

          that display things on the screen will be especially primitive and
          will be unable to determine the current screen size, and will be
          unable to move the cursor.
 
          that display things on the screen will be especially primitive and
          will be unable to determine the current screen size, and will be
          unable to move the cursor.
 

+config BUSYBOX_CONFIG_VOLUMEID
+       bool #No description makes it a hidden option
+       default n
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_EXT
+       bool "Ext filesystem"
+       default y
+       depends on BUSYBOX_CONFIG_VOLUMEID
+       help
+         TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_BTRFS
+       bool "btrfs filesystem"
+       default y
+       depends on BUSYBOX_CONFIG_VOLUMEID
+       help
+         TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_REISERFS
+       bool "Reiser filesystem"
+       default y
+       depends on BUSYBOX_CONFIG_VOLUMEID
+       help
+         TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_FAT
+       bool "fat filesystem"
+       default y
+       depends on BUSYBOX_CONFIG_VOLUMEID
+       help
+         TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_HFS
+       bool "hfs filesystem"
+       default y
+       depends on BUSYBOX_CONFIG_VOLUMEID
+       help
+         TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_JFS
+       bool "jfs filesystem"
+       default n
+       depends on BUSYBOX_CONFIG_VOLUMEID
+       help
+         TODO
+
+### config FEATURE_VOLUMEID_UFS
+###    bool "ufs filesystem"
+###    default n
+###    depends on VOLUMEID
+###    help
+###      TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_XFS
+       bool "xfs filesystem"
+       default y
+       depends on BUSYBOX_CONFIG_VOLUMEID
+       help
+         TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_NTFS
+       bool "ntfs filesystem"
+       default y
+       depends on BUSYBOX_CONFIG_VOLUMEID
+       help
+         TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_ISO9660
+       bool "iso9660 filesystem"
+       default y
+       depends on BUSYBOX_CONFIG_VOLUMEID
+       help
+         TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_UDF
+       bool "udf filesystem"
+       default y
+       depends on BUSYBOX_CONFIG_VOLUMEID
+       help
+         TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LUKS
+       bool "luks filesystem"
+       default n
+       depends on BUSYBOX_CONFIG_VOLUMEID
+       help
+         TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXSWAP
+       bool "linux swap filesystem"
+       default y
+       depends on BUSYBOX_CONFIG_VOLUMEID
+       help
+         TODO
+
+### config FEATURE_VOLUMEID_LVM
+###    bool "lvm"
+###    default n
+###    depends on VOLUMEID
+###    help
+###      TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_CRAMFS
+       bool "cramfs filesystem"
+       default n
+       depends on BUSYBOX_CONFIG_VOLUMEID
+       help
+         TODO
+
+### config FEATURE_VOLUMEID_HPFS
+###    bool "hpfs filesystem"
+###    default n
+###    depends on VOLUMEID
+###    help
+###      TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_ROMFS
+       bool "romfs filesystem"
+       default n
+       depends on BUSYBOX_CONFIG_VOLUMEID
+       help
+         TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_SYSV
+       bool "sysv filesystem"
+       default n
+       depends on BUSYBOX_CONFIG_VOLUMEID
+       help
+         TODO
+
+### config FEATURE_VOLUMEID_MINIX
+###    bool "minix filesystem"
+###    default n
+###    depends on VOLUMEID
+###    help
+###      TODO
+
+### These only detect partition tables - not used (yet?)
+### config FEATURE_VOLUMEID_MAC
+###    bool "mac filesystem"
+###    default n
+###    depends on VOLUMEID
+###    help
+###      TODO
+###
+### config FEATURE_VOLUMEID_MSDOS
+###    bool "msdos filesystem"
+###    default n
+###    depends on VOLUMEID
+###    help
+###      TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_OCFS2
+       bool "ocfs2 filesystem"
+       default n
+       depends on BUSYBOX_CONFIG_VOLUMEID
+       help
+         TODO
+
+### config FEATURE_VOLUMEID_HIGHPOINTRAID
+###    bool "highpoint raid"
+###    default n
+###    depends on VOLUMEID
+###    help
+###      TODO
+
+### config FEATURE_VOLUMEID_ISWRAID
+###    bool "intel raid"
+###    default n
+###    depends on VOLUMEID
+###    help
+###      TODO
+
+### config FEATURE_VOLUMEID_LSIRAID
+###    bool "lsi raid"
+###    default n
+###    depends on VOLUMEID
+###    help
+###      TODO
+
+### config FEATURE_VOLUMEID_VIARAID
+###    bool "via raid"
+###    default n
+###    depends on VOLUMEID
+###    help
+###      TODO
+
+### config FEATURE_VOLUMEID_SILICONRAID
+###    bool "silicon raid"
+###    default n
+###    depends on VOLUMEID
+###    help
+###      TODO
+
+### config FEATURE_VOLUMEID_NVIDIARAID
+###    bool "nvidia raid"
+###    default n
+###    depends on VOLUMEID
+###    help
+###      TODO
+
+### config FEATURE_VOLUMEID_PROMISERAID
+###    bool "promise raid"
+###    default n
+###    depends on VOLUMEID
+###    help
+###      TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXRAID
+       bool "linuxraid"
+       default y
+       depends on BUSYBOX_CONFIG_VOLUMEID
+       help
+         TODO
+
+config BUSYBOX_CONFIG_MOUNT
+       bool "mount"
+       default y
+       help
+         All files and filesystems in Unix are arranged into one big directory
+         tree. The 'mount' utility is used to graft a filesystem onto a
+         particular part of the tree. A filesystem can either live on a block
+         device, or it can be accessible over the network, as is the case with
+         NFS filesystems. Most people using BusyBox will also want to enable
+         the 'mount' utility.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE
+       bool "Support option -f"
+       default n
+       depends on BUSYBOX_CONFIG_MOUNT
+       help
+         Enable support for faking a file system mount.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_VERBOSE
+       bool "Support option -v"
+       default n
+       depends on BUSYBOX_CONFIG_MOUNT
+       help
+         Enable multi-level -v[vv...] verbose messages. Useful if you
+         debug mount problems and want to see what is exactly passed
+         to the kernel.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_HELPERS
+       bool "Support mount helpers"
+       default n
+       depends on BUSYBOX_CONFIG_MOUNT
+       help
+         Enable mounting of virtual file systems via external helpers.
+         E.g. "mount obexfs#-b00.11.22.33.44.55 /mnt" will in effect call
+         "obexfs -b00.11.22.33.44.55 /mnt"
+         Also "mount -t sometype [-o opts] fs /mnt" will try
+         "sometype [-o opts] fs /mnt" if simple mount syscall fails.
+         The idea is to use such virtual filesystems in /etc/fstab.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_LABEL
+       bool "Support specifiying devices by label or UUID"
+       default n
+       depends on BUSYBOX_CONFIG_MOUNT
+       select BUSYBOX_CONFIG_VOLUMEID
+       help
+         This allows for specifying a device by label or uuid, rather than by
+         name. This feature utilizes the same functionality as blkid/findfs.
+         This also enables label or uuid support for swapon.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_NFS
+       bool "Support mounting NFS file systems"
+       default y
+       depends on BUSYBOX_CONFIG_MOUNT
+       select BUSYBOX_CONFIG_FEATURE_HAVE_RPC
+       select BUSYBOX_CONFIG_FEATURE_SYSLOG
+       help
+         Enable mounting of NFS file systems.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_CIFS
+       bool "Support mounting CIFS/SMB file systems"
+       default y
+       depends on BUSYBOX_CONFIG_MOUNT
+       help
+         Enable support for samba mounts.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_FLAGS
+       depends on BUSYBOX_CONFIG_MOUNT
+       bool "Support lots of -o flags in mount"
+       default y
+       help
+         Without this, mount only supports ro/rw/remount. With this, it
+         supports nosuid, suid, dev, nodev, exec, noexec, sync, async, atime,
+         noatime, diratime, nodiratime, loud, bind, move, shared, slave,
+         private, unbindable, rshared, rslave, rprivate, and runbindable.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_FSTAB
+       depends on BUSYBOX_CONFIG_MOUNT
+       bool "Support /etc/fstab and -a"
+       default y
+       help
+         Support mount all and looking for files in /etc/fstab.
+

 config BUSYBOX_CONFIG_PIVOT_ROOT
        bool "pivot_root"
        default y
        help
          The pivot_root utility swaps the mount points for the root filesystem
 config BUSYBOX_CONFIG_PIVOT_ROOT
        bool "pivot_root"
        default y
        help
          The pivot_root utility swaps the mount points for the root filesystem

-         with some other mounted filesystem.  This allows you to do all sorts
+         with some other mounted filesystem. This allows you to do all sorts

          of wild and crazy things with your Linux system and is far more
          powerful than 'chroot'.
 
          of wild and crazy things with your Linux system and is far more
          powerful than 'chroot'.
 

+         Note: This is for initrd in linux 2.4. Under initramfs (introduced
+         in linux 2.6) use switch_root instead.
+

 config BUSYBOX_CONFIG_RDATE
        bool "rdate"
        default y
 config BUSYBOX_CONFIG_RDATE
        bool "rdate"
        default y


@@ -270,88 +782,141 @@ config BUSYBOX_CONFIG_RDATE
          the RFC868 protocol, which is built into the inetd daemon on most
          systems.
 
          the RFC868 protocol, which is built into the inetd daemon on most
          systems.
 

+config BUSYBOX_CONFIG_RDEV
+       bool "rdev"
+       default n
+       help
+         Print the device node associated with the filesystem mounted at '/'.
+
+config BUSYBOX_CONFIG_READPROFILE
+       bool "readprofile"
+       default n
+       help
+         This allows you to parse /proc/profile for basic profiling.
+
+config BUSYBOX_CONFIG_RTCWAKE
+       bool "rtcwake"
+       default n
+       help
+         Enter a system sleep state until specified wakeup time.
+
+config BUSYBOX_CONFIG_SCRIPT
+       bool "script"
+       default n
+       help
+         The script makes typescript of terminal session.
+
+config BUSYBOX_CONFIG_SCRIPTREPLAY
+       bool "scriptreplay"
+       default n
+       help
+         This program replays a typescript, using timing information
+         given by script -t.
+
+config BUSYBOX_CONFIG_SETARCH
+       bool "setarch"
+       default n
+       help
+         The linux32 utility is used to create a 32bit environment for the
+         specified program (usually a shell). It only makes sense to have
+         this util on a system that supports both 64bit and 32bit userland
+         (like amd64/x86, ppc64/ppc, sparc64/sparc, etc...).
+

 config BUSYBOX_CONFIG_SWAPONOFF
        bool "swaponoff"
 config BUSYBOX_CONFIG_SWAPONOFF
        bool "swaponoff"

-       default n
+       default y

        help
          This option enables both the 'swapon' and the 'swapoff' utilities.
          Once you have created some swap space using 'mkswap', you also need
        help
          This option enables both the 'swapon' and the 'swapoff' utilities.
          Once you have created some swap space using 'mkswap', you also need

-         to enable your swap space with the 'swapon' utility.  The 'swapoff'
+         to enable your swap space with the 'swapon' utility. The 'swapoff'

          utility is used, typically at system shutdown, to disable any swap
          utility is used, typically at system shutdown, to disable any swap

-         space.  If you are not using any swap space, you can leave this
+         space. If you are not using any swap space, you can leave this

          option disabled.
 
          option disabled.
 

-config BUSYBOX_CONFIG_MOUNT
-       bool "mount"
-       default y
+config BUSYBOX_CONFIG_FEATURE_SWAPON_PRI
+       bool "Support priority option -p"
+       default n
+       depends on BUSYBOX_CONFIG_SWAPONOFF

        help
        help

-         All files and filesystems in Unix are arranged into one big directory
-         tree.  The 'mount' utility is used to graft a filesystem onto a
-         particular part of the tree.  A filesystem can either live on a block
-         device, or it can be accessible over the network, as is the case with
-         NFS filesystems.  Most people using BusyBox will also want to enable
-         the 'mount' utility.
+         Enable support for setting swap device priority in swapon.

 
 

-config BUSYBOX_FEATURE_MOUNT_NFS
-       bool "  Support mounting NFS file systems"
+config BUSYBOX_CONFIG_SWITCH_ROOT
+       bool "switch_root"

        default y
        default y

-       depends on BUSYBOX_CONFIG_MOUNT

        help
        help

-        Enable mounting of NFS file systems.
+         The switch_root utility is used from initramfs to select a new
+         root device. Under initramfs, you have to use this instead of
+         pivot_root. (Stop reading here if you don't care why.)
+
+         Booting with initramfs extracts a gzipped cpio archive into rootfs
+         (which is a variant of ramfs/tmpfs). Because rootfs can't be moved
+         or unmounted*, pivot_root will not work from initramfs. Instead,
+         switch_root deletes everything out of rootfs (including itself),
+         does a mount --move that overmounts rootfs with the new root, and
+         then execs the specified init program.
+
+         * Because the Linux kernel uses rootfs internally as the starting
+         and ending point for searching through the kernel's doubly linked
+         list of active mount points. That's why.

 
 config BUSYBOX_CONFIG_UMOUNT
        bool "umount"
        default y
        help
 
 config BUSYBOX_CONFIG_UMOUNT
        bool "umount"
        default y
        help

-         When you want to remove a mounted filesystem from its current mount point,
-         for example when you are shutting down the system, the 'umount' utility is
-         the tool to use.  If you enabled the 'mount' utility, you almost certainly
-         also want to enable 'umount'.
+         When you want to remove a mounted filesystem from its current mount
+         point, for example when you are shutting down the system, the
+         'umount' utility is the tool to use. If you enabled the 'mount'
+         utility, you almost certainly also want to enable 'umount'.

 
 

-config BUSYBOX_CONFIG_FEATURE_MOUNT_FORCE
-       bool "  Support forced filesystem unmounting"
+config BUSYBOX_CONFIG_FEATURE_UMOUNT_ALL
+       bool "Support option -a"

        default y
        depends on BUSYBOX_CONFIG_UMOUNT
        help
        default y
        depends on BUSYBOX_CONFIG_UMOUNT
        help

-         This allows you to _force_ a filesystem to be umounted.  This is generally
-         only useful when you want to get rid of an unreachable NFS system.
+         Support -a option to unmount all currently mounted filesystems.

 
 comment "Common options for mount/umount"
        depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
 
 config BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP
 
 comment "Common options for mount/umount"
        depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
 
 config BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP

-       bool "  Support for loop devices"
+       bool "Support loopback mounts"

        default y
        depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
        help
        default y
        depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
        help

-         Enabling this feature allows mount to use the '-o' loop options,
-         which lets you loop mount files.  Mount will automagically setup and
-         free the necessary loop devices so you do not need to mess with the
-         'losetup' utility unless you really want to.  This is really
-         only useful if you plan to loop mount files.
+         Enabling this feature allows automatic mounting of files (containing
+         filesystem images) via the linux kernel's loopback devices.
+         The mount command will detect you are trying to mount a file instead
+         of a block device, and transparently associate the file with a
+         loopback device. The umount command will also free that loopback
+         device.
+
+         You can still use the 'losetup' utility (to manually associate files
+         with loop devices) if you need to do something advanced, such as
+         specify an offset or cryptographic options to the loopback device.
+         (If you don't want umount to free the loop device, use "umount -D".)

 
 config BUSYBOX_CONFIG_FEATURE_MTAB_SUPPORT
 
 config BUSYBOX_CONFIG_FEATURE_MTAB_SUPPORT

-       bool "  Support for a real /etc/mtab (instead of /proc/mounts)"
+       bool "Support for the old /etc/mtab file"

        default n
        depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
        default n
        depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT

-       help
-         If your root filesystem is writable and you wish to have the 'mount'
-         utility create an mtab file listing the filesystems which have been
-         mounted then you should enable this option.  Most people that use
-         BusyBox have a read-only root filesystem, so they will leave this
-         option disabled and BusyBox will use the /proc/mounts file.
-
-config BUSYBOX_CONFIG_FEATURE_MTAB_FILENAME
-       string "  mtab file location"
-       default n
-       depends on BUSYBOX_CONFIG_FEATURE_MTAB_SUPPORT
-       help
-         Some people have a read only root filesystem, but they also wish to
-         have the 'mount' utility create an mtab file listing the filesystems
-         which have been mounted.  This option allows you to specify an alternative
-         location for the mtab file, such as /var/mtab, or /tmp/mtab.  The default
-         value is /etc/mtab, which is where this file is located on most desktop
-         Linux systems.
+       select BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE
+       help
+         Historically, Unix systems kept track of the currently mounted
+         partitions in the file "/etc/mtab". These days, the kernel exports
+         the list of currently mounted partitions in "/proc/mounts", rendering
+         the old mtab file obsolete. (In modern systems, /etc/mtab should be
+         a symlink to /proc/mounts.)
+
+         The only reason to have mount maintain an /etc/mtab file itself is if
+         your stripped-down embedded system does not have a /proc directory.
+         If you must use this, keep in mind it's inherently brittle (for
+         example a mount under chroot won't update it), can't handle modern
+         features like separate per-process filesystem namespaces, requires
+         that your /etc directory be writeable, tends to get easily confused
+         by --bind or --move mounts, won't update if you rename a directory
+         that contains a mount point, and so on. (In brief: avoid.)
+
+         About the only reason to use this is if you've removed /proc from
+         your kernel.

 
 endmenu
 
 endmenu

-