generic: rtl8366: add rtl8366_smi_write_reg_noack helper

[openwrt.git] / package / busybox / config / libbb / Config.in

diff --git a/package/busybox/config/libbb/Config.in b/package/busybox/config/libbb/Config.in
index 8016ef0..6475403 100644 (file)
--- a/package/busybox/config/libbb/Config.in
+++ b/package/busybox/config/libbb/Config.in
@@ -1,3 +1,4 @@
+# DO NOT EDIT. This file is generated from Config.src

 #
 # For a description of the syntax of this configuration file,
 # see scripts/kbuild/config-language.txt.
 #
 # For a description of the syntax of this configuration file,
 # see scripts/kbuild/config-language.txt.


@@ -5,6 +6,21 @@
 
 menu "Busybox Library Tuning"
 
 
 menu "Busybox Library Tuning"
 

+config BUSYBOX_CONFIG_FEATURE_SYSTEMD
+       bool "Enable systemd support"
+       default n
+       help
+         If you plan to use busybox daemons on a system where daemons
+         are controlled by systemd, enable this option.
+         If you don't use systemd, it is still safe to enable it,
+         but the downside is increased code size.
+config BUSYBOX_CONFIG_FEATURE_RTMINMAX
+       bool "Support RTMIN[+n] and RTMAX[-n] signal names"
+       default n
+       help
+         Support RTMIN[+n] and RTMAX[-n] signal names
+         in kill, killall etc. This costs ~250 bytes.
+

 config BUSYBOX_CONFIG_PASSWORD_MINLEN
        int "Minimum password length"
        default 6
 config BUSYBOX_CONFIG_PASSWORD_MINLEN
        int "Minimum password length"
        default 6


@@ -41,6 +57,17 @@ config BUSYBOX_CONFIG_FEATURE_ETC_NETWORKS
          a rarely used feature which allows you to use names
          instead of IP/mask pairs in route command.
 
          a rarely used feature which allows you to use names
          instead of IP/mask pairs in route command.
 

+config BUSYBOX_CONFIG_FEATURE_USE_TERMIOS
+       bool "Use termios to manipulate the screen"
+       default n
+       depends on BUSYBOX_CONFIG_MORE || BUSYBOX_CONFIG_TOP || BUSYBOX_CONFIG_POWERTOP
+       help
+         This option allows utilities such as 'more' and 'top' to determine
+         the size of the screen. If you leave this disabled, your utilities
+         that display things on the screen will be especially primitive and
+         will be unable to determine the current screen size, and will be
+         unable to move the cursor.
+

 config BUSYBOX_CONFIG_FEATURE_EDITING
        bool "Command line editing"
        default y
 config BUSYBOX_CONFIG_FEATURE_EDITING
        bool "Command line editing"
        default y


@@ -67,18 +94,27 @@ config BUSYBOX_CONFIG_FEATURE_EDITING_VI
 
 config BUSYBOX_CONFIG_FEATURE_EDITING_HISTORY
        int "History size"
 
 config BUSYBOX_CONFIG_FEATURE_EDITING_HISTORY
        int "History size"

-       range 0 99999
+       # Don't allow way too big values here, code uses fixed "char *history[N]" struct member
+       range 0 9999

        default 256
        depends on BUSYBOX_CONFIG_FEATURE_EDITING
        help
        default 256
        depends on BUSYBOX_CONFIG_FEATURE_EDITING
        help

-         Specify command history size.
+         Specify command history size (0 - disable).

 
 config BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY
        bool "History saving"
        default n
 
 config BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY
        bool "History saving"
        default n

-       depends on BUSYBOX_CONFIG_ASH && BUSYBOX_CONFIG_FEATURE_EDITING
+       depends on BUSYBOX_CONFIG_FEATURE_EDITING
+       help
+         Enable history saving in shells.
+
+config BUSYBOX_CONFIG_FEATURE_REVERSE_SEARCH
+       bool "Reverse history search"
+       default n
+       depends on BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY

        help
        help

-         Enable history saving in ash shell.
+         Enable readline-like Ctrl-R combination for reverse history search.
+         Increases code by about 0.5k.

 
 config BUSYBOX_CONFIG_FEATURE_TAB_COMPLETION
        bool "Tab completion"
 
 config BUSYBOX_CONFIG_FEATURE_TAB_COMPLETION
        bool "Tab completion"


@@ -111,7 +147,7 @@ config BUSYBOX_CONFIG_FEATURE_EDITING_ASK_TERMINAL
          current cursor position. This information is used to make line
          editing more robust in some cases.
          If you are not sure whether your terminals respond to this code
          current cursor position. This information is used to make line
          editing more robust in some cases.
          If you are not sure whether your terminals respond to this code

-         correctly, or want to save on code size (about 300 bytes),
+         correctly, or want to save on code size (about 400 bytes),

          then do not turn this option on.
 
 config BUSYBOX_CONFIG_FEATURE_NON_POSIX_CP
          then do not turn this option on.
 
 config BUSYBOX_CONFIG_FEATURE_NON_POSIX_CP


@@ -122,7 +158,7 @@ config BUSYBOX_CONFIG_FEATURE_NON_POSIX_CP
          and create a regular file. This does not conform to POSIX,
          but prevents a symlink attack.
          Similarly, "cp file device" will not send file's data
          and create a regular file. This does not conform to POSIX,
          but prevents a symlink attack.
          Similarly, "cp file device" will not send file's data

-         to the device.
+         to the device. (To do that, use "cat file >device")

 
 config BUSYBOX_CONFIG_FEATURE_VERBOSE_CP_MESSAGE
        bool "Give more precise messages when copy fails (cp, mv etc)"
 
 config BUSYBOX_CONFIG_FEATURE_VERBOSE_CP_MESSAGE
        bool "Give more precise messages when copy fails (cp, mv etc)"


@@ -134,9 +170,8 @@ config BUSYBOX_CONFIG_FEATURE_VERBOSE_CP_MESSAGE
            $ cp file /vmlinuz/file
            cp: cannot stat '/vmlinuz/file': Path has non-directory component
          If this feature is not enabled, they will be, respectively:
            $ cp file /vmlinuz/file
            cp: cannot stat '/vmlinuz/file': Path has non-directory component
          If this feature is not enabled, they will be, respectively:

-           cp: cannot remove '/does_not_exist/file': No such file or directory
+           cp: cannot create '/does_not_exist/file': No such file or directory

            cp: cannot stat '/vmlinuz/file': Not a directory
            cp: cannot stat '/vmlinuz/file': Not a directory

-         respectively.

          This will cost you ~60 bytes.
 
 config BUSYBOX_CONFIG_FEATURE_COPYBUF_KB
          This will cost you ~60 bytes.
 
 config BUSYBOX_CONFIG_FEATURE_COPYBUF_KB


@@ -144,14 +179,34 @@ config BUSYBOX_CONFIG_FEATURE_COPYBUF_KB
        range 1 1024
        default 4
        help
        range 1 1024
        default 4
        help

-         Size of buffer used by cp, mv, install etc.
+         Size of buffer used by cp, mv, install, wget etc.

          Buffers which are 4 kb or less will be allocated on stack.
          Bigger buffers will be allocated with mmap, with fallback to 4 kb
          stack buffer if mmap fails.
 
          Buffers which are 4 kb or less will be allocated on stack.
          Bigger buffers will be allocated with mmap, with fallback to 4 kb
          stack buffer if mmap fails.
 

+config BUSYBOX_CONFIG_FEATURE_SKIP_ROOTFS
+       bool "Skip rootfs in mount table"
+       default n
+       help
+         Ignore rootfs entry in mount table.
+
+         In Linux, kernel has a special filesystem, rootfs, which is initially
+         mounted on /. It contains initramfs data, if kernel is configured
+         to have one. Usually, another file system is mounted over / early
+         in boot process, and therefore most tools which manipulate
+         mount table, such as df, will skip rootfs entry.
+
+         However, some systems do not mount anything on /.
+         If you need to configure busybox for one of these systems,
+         you may find useful to turn this option off to make df show
+         initramfs statistic.
+
+         Otherwise, choose Y.
+

 config BUSYBOX_CONFIG_MONOTONIC_SYSCALL
        bool "Use clock_gettime(CLOCK_MONOTONIC) syscall"
        default n
 config BUSYBOX_CONFIG_MONOTONIC_SYSCALL
        bool "Use clock_gettime(CLOCK_MONOTONIC) syscall"
        default n

+       select BUSYBOX_CONFIG_PLATFORM_LINUX

        help
          Use clock_gettime(CLOCK_MONOTONIC) syscall for measuring
          time intervals (time, ping, traceroute etc need this).
        help
          Use clock_gettime(CLOCK_MONOTONIC) syscall for measuring
          time intervals (time, ping, traceroute etc need this).