config EGLIBC_OPTION_EGLIBC_ADVANCED_INET6
- bool "IPv6 Advanced Sockets API support (RFC3542)"
- default y
- depends EGLIBC_OPTION_EGLIBC_INET
- help
- This option group includes the functions specified by RFC 3542,
- "Advanced Sockets Application Program Interface (API) for
- IPv6".
-
- This option group includes the following functions:
-
- inet6_opt_append
- inet6_opt_find
- inet6_opt_finish
- inet6_opt_get_val
- inet6_opt_init
- inet6_alloc
- inet6_append
- inet6_find
- inet6_init
- inet6_next
- inet6_space
- inet6_opt_next
- inet6_opt_set_val
- inet6_rth_add
- inet6_rth_getaddr
- inet6_rth_init
- inet6_rth_reverse
- inet6_rth_segments
- inet6_rth_space
+ bool "IPv6 Advanced Sockets API support (RFC3542)"
+ default y
+ select EGLIBC_OPTION_EGLIBC_INET
+ help
+ This option group includes the functions specified by RFC 3542,
+ "Advanced Sockets Application Program Interface (API) for
+ IPv6".
+
+ This option group includes the following functions:
+
+ inet6_opt_append
+ inet6_opt_find
+ inet6_opt_finish
+ inet6_opt_get_val
+ inet6_opt_init
+ inet6_option_alloc
+ inet6_option_append
+ inet6_option_find
+ inet6_option_init
+ inet6_option_next
+ inet6_option_space
+ inet6_opt_next
+ inet6_opt_set_val
+ inet6_rth_add
+ inet6_rth_getaddr
+ inet6_rth_init
+ inet6_rth_reverse
+ inet6_rth_segments
+ inet6_rth_space
+
config EGLIBC_OPTION_EGLIBC_BACKTRACE
- bool "Functions for producing backtraces"
- default y
- help
- This option group includes functions for producing a list of
- the function calls that are currently active in a thread, from
- within the thread itself. These functions are often used
- within signal handlers, to produce diagnostic output.
+ bool "Functions for producing backtraces"
+ default y
+ help
+ This option group includes functions for producing a list of
+ the function calls that are currently active in a thread, from
+ within the thread itself. These functions are often used
+ within signal handlers, to produce diagnostic output.
+
+ This option group includes the following functions:
+
+ backtrace
+ backtrace_symbols
+ backtrace_symbols_fd
+
- This option group includes the following functions:
+config EGLIBC_OPTION_EGLIBC_BIG_MACROS
+ bool "Use extensive inline code"
+ default y
+ depends EGLIBC_VERSION_2_11 || EGLIBC_VERSION_2_12
+ help
+ This option group specifies whether certain pieces of code
+ should be inlined to achieve maximum speed. If this option
+ group is not selected, function calls will be used instead,
+ hence reducing the library footprint.
- backtrace
- backtrace_symbols
- backtrace_symbols_fd
config EGLIBC_OPTION_EGLIBC_BSD
- bool "BSD-specific functions, and their compatibility stubs"
- default y
- help
- This option group includes functions specific to BSD kernels.
- A number of these functions have stub versions that are also
- included in libraries built for non-BSD systems for
- compatibility.
-
- This option group includes the following functions:
-
- chflags
- fchflags
- lchmod
- revoke
- setlogin
+ bool "BSD-specific functions, and their compatibility stubs"
+ default y
+ help
+ This option group includes functions specific to BSD kernels.
+ A number of these functions have stub versions that are also
+ included in libraries built for non-BSD systems for
+ compatibility.
+
+ This option group includes the following functions:
+
+ chflags
+ fchflags
+ lchmod
+ revoke
+ setlogin
+
config EGLIBC_OPTION_EGLIBC_CXX_TESTS
- bool "Tests that link against the standard C++ library."
- default y
- depends EGLIBC_OPTION_POSIX_WIDE_CHAR_DEVICE_IO
- depends EGLIBC_OPTION_EGLIBC_LIBM
- help
- This option group does not include any C library functions;
- instead, it controls which EGLIBC tests an ordinary 'make
- tests' runs. With this group disabled, tests that would
- normally link against the standard C++ library are not
- run.
-
- The standard C++ library depends on the math library 'libm' and
- the wide character I/O functions included in EGLIBC. If those
- option groups are disabled, this test must also be disabled.
+ bool "Tests that link against the standard C++ library."
+ default y
+ select EGLIBC_OPTION_POSIX_WIDE_CHAR_DEVICE_IO
+ select EGLIBC_OPTION_EGLIBC_LIBM
+ help
+ This option group does not include any C library functions;
+ instead, it controls which EGLIBC tests an ordinary 'make
+ tests' runs. With this group disabled, tests that would
+ normally link against the standard C++ library are not
+ run.
+
+ The standard C++ library depends on the math library 'libm' and
+ the wide character I/O functions included in EGLIBC. If those
+ option groups are disabled, this test must also be disabled.
+
config EGLIBC_OPTION_EGLIBC_CATGETS
- bool "Functions for accessing message catalogs"
- default y
- depends EGLIBC_OPTION_EGLIBC_LOCALE_CODE
- help
- This option group includes functions for accessing message
- catalogs: catopen, catclose, and catgets.
+ bool "Functions for accessing message catalogs"
+ default y
+ select EGLIBC_OPTION_EGLIBC_LOCALE_CODE
+ help
+ This option group includes functions for accessing message
+ catalogs: catopen, catclose, and catgets.
+
+ This option group depends on the EGLIBC_OPTION_EGLIBC_LOCALE_CODE
+ option group; if you disable that, you must also disable this.
- This option group depends on the EGLIBC_LOCALE_CODE
- option group; if you disable that, you must also disable this.
config EGLIBC_OPTION_EGLIBC_CHARSETS
- bool "iconv/gconv character set conversion libraries"
- default y
- help
-
- This option group includes support for character sets other
- than ASCII (ANSI_X3.4-1968) and Unicode and ISO-10646 in their
- various encodings. This affects both the character sets
- supported by the wide and multibyte character functions, and
- those supported by the 'iconv' functions.
-
- With this option group disabled, EGLIBC supports only the
- following character sets:
-
- ANSI_X3.4 - ASCII
- ANSI_X3.4-1968
- ANSI_X3.4-1986
- ASCII
- CP367
- CSASCII
- IBM367
- ISO-IR-6
- ISO646-US
- ISO_646.IRV:1991
- OSF00010020
- US
- US-ASCII
-
- 10646-1:1993 - ISO 10646, in big-endian UCS4 form
- 10646-1:1993/UCS4
- CSUCS4
- ISO-10646
- ISO-10646/UCS4
- OSF00010104
- OSF00010105
- OSF00010106
- UCS-4
- UCS-4BE
- UCS4
-
- UCS-4LE - ISO 10646, in little-endian UCS4 form
-
- ISO-10646/UTF-8 - ISO 10646, in UTF-8 form
- ISO-10646/UTF8
- ISO-IR-193
- OSF05010001
- UTF-8
- UTF8
-
- ISO-10646/UCS2 - ISO 10646, in target-endian UCS2 form
- OSF00010100
- OSF00010101
- OSF00010102
- UCS-2
- UCS2
-
- UCS-2BE - ISO 10646, in big-endian UCS2 form
- UNICODEBIG
-
- UCS-2LE - ISO 10646, in little-endian UCS2 form
- UNICODELITTLE
-
- WCHAR_T - EGLIBC's internal form (target-endian,
- 32-bit ISO 10646)
+ bool "iconv/gconv character set conversion libraries"
+ default y
+ help
+
+ This option group includes support for character sets other
+ than ASCII (ANSI_X3.4-1968) and Unicode and ISO-10646 in their
+ various encodings. This affects both the character sets
+ supported by the wide and multibyte character functions, and
+ those supported by the 'iconv' functions.
+
+ With this option group disabled, EGLIBC supports only the
+ following character sets:
+
+ ANSI_X3.4 - ASCII
+ ANSI_X3.4-1968
+ ANSI_X3.4-1986
+ ASCII
+ CP367
+ CSASCII
+ IBM367
+ ISO-IR-6
+ ISO646-US
+ ISO_646.IRV:1991
+ OSF00010020
+ US
+ US-ASCII
+
+ 10646-1:1993 - ISO 10646, in big-endian UCS4 form
+ 10646-1:1993/UCS4
+ CSUCS4
+ ISO-10646
+ ISO-10646/UCS4
+ OSF00010104
+ OSF00010105
+ OSF00010106
+ UCS-4
+ UCS-4BE
+ UCS4
+
+ UCS-4LE - ISO 10646, in little-endian UCS4 form
+
+ ISO-10646/UTF-8 - ISO 10646, in UTF-8 form
+ ISO-10646/UTF8
+ ISO-IR-193
+ OSF05010001
+ UTF-8
+ UTF8
+
+ ISO-10646/UCS2 - ISO 10646, in target-endian UCS2 form
+ OSF00010100
+ OSF00010101
+ OSF00010102
+ UCS-2
+ UCS2
+
+ UCS-2BE - ISO 10646, in big-endian UCS2 form
+ UNICODEBIG
+
+ UCS-2LE - ISO 10646, in little-endian UCS2 form
+ UNICODELITTLE
+
+ WCHAR_T - EGLIBC's internal form (target-endian,
+ 32-bit ISO 10646)
+
+
+config EGLIBC_OPTION_EGLIBC_CRYPT
+ bool "Encryption library"
+ default y
+ depends EGLIBC_VERSION_2_12
+ help
+ This option group includes the `libcrypt' library which
+ provides functions for one-way encryption. Supported
+ encryption algorithms include MD5, SHA-256, SHA-512 and DES.
+
+
+config EGLIBC_OPTION_EGLIBC_CRYPT_UFC
+ bool "Ultra fast `crypt' implementation"
+ default y
+ depends EGLIBC_VERSION_2_12
+ select EGLIBC_OPTION_EGLIBC_CRYPT
+ help
+ This option group provides ultra fast DES-based implementation of
+ the `crypt' function. When this option group is disabled,
+ (a) the library will not provide the setkey[_r] and encrypt[_r]
+ functions and (b) the crypt[_r] function will return NULL and set the
+ errno to ENOSYS if /salt/ passed does not correspond to either MD5,
+ SHA-256 or SHA-512 algorithm.
+
config EGLIBC_OPTION_EGLIBC_DB_ALIASES
- bool "Functions for accessing the mail aliases database"
- default y
- help
- This option group includes functions for looking up mail
- aliases in '/etc/aliases' or using nsswitch. It includes the
- following functions:
-
- endaliasent
- getaliasbyname
- getaliasbyname_r
- getaliasent
- getaliasent_r
- setaliasent
-
- When this option group is disabled, the NSS service libraries
- also lack support for querying their mail alias tables.
+ bool "Functions for accessing the mail aliases database"
+ default y
+ help
+ This option group includes functions for looking up mail
+ aliases in '/etc/aliases' or using nsswitch. It includes the
+ following functions:
+
+ endaliasent
+ getaliasbyname
+ getaliasbyname_r
+ getaliasent
+ getaliasent_r
+ setaliasent
+
+ When this option group is disabled, the NSS service libraries
+ also lack support for querying their mail alias tables.
+
config EGLIBC_OPTION_EGLIBC_ENVZ
- bool "Functions for handling envz-style environment vectors."
- default y
- help
- This option group contains functions for creating and operating
- on envz vectors. An "envz vector" is a vector of strings in a
- contiguous block of memory, where each element is a name-value
- pair, and elements are separated from their neighbors by null
- characters.
+ bool "Functions for handling envz-style environment vectors."
+ default y
+ help
+ This option group contains functions for creating and operating
+ on envz vectors. An "envz vector" is a vector of strings in a
+ contiguous block of memory, where each element is a name-value
+ pair, and elements are separated from their neighbors by null
+ characters.
- This option group includes the following functions:
+ This option group includes the following functions:
+
+ envz_add envz_merge
+ envz_entry envz_remove
+ envz_get envz_strip
- envz_add envz_merge
- envz_entry envz_remove
- envz_get envz_strip
config EGLIBC_OPTION_EGLIBC_FCVT
- bool "Functions for converting floating-point numbers to strings"
- default y
- depends EGLIBC_VERSION_2_10
- help
- This option group includes functions for converting
- floating-point numbers to strings.
+ bool "Functions for converting floating-point numbers to strings"
+ default y
+ depends EGLIBC_VERSION_2_10 || EGLIBC_VERSION_2_11 || EGLIBC_VERSION_2_12
+ help
+ This option group includes functions for converting
+ floating-point numbers to strings.
+
+ This option group includes the following functions:
- This option group includes the following functions:
+ ecvt qecvt
+ ecvt_r qecvt_r
+ fcvt qfcvt
+ fcvt_r qfcvt_r
+ gcvt qgcvt
- ecvt qecvt
- ecvt_r qecvt_r
- fcvt qfcvt
- fcvt_r qfcvt_r
- gcvt qgcvt
config EGLIBC_OPTION_EGLIBC_FMTMSG
- bool "Functions for formatting messages"
- default y
- depends EGLIBC_VERSION_2_10
- help
- This option group includes the following functions:
+ bool "Functions for formatting messages"
+ default y
+ depends EGLIBC_VERSION_2_10 || EGLIBC_VERSION_2_11 || EGLIBC_VERSION_2_12
+ help
+ This option group includes the following functions:
+
+ addseverity fmtmsg
- addseverity fmtmsg
config EGLIBC_OPTION_EGLIBC_FSTAB
- bool "Access functions for 'fstab'"
- default y
- help
- This option group includes functions for reading the mount
- point specification table, '/etc/fstab'. These functions are
- not included in the POSIX standard, which provides the
- 'getmntent' family of functions instead.
-
- This option group includes the following functions:
-
- endfsent getfsspec
- getfsent setfsent
- getfsfile
-
-config OPTION_EGLIBC_FTRAVERSE
- bool "Functions for traversing file hierarchies"
- default y
- depends EGLIBC_VERSION_2_10
- help
- This option group includes functions for traversing file
- UNIX file hierachies.
-
- This option group includes the following functions:
-
- fts_open ftw
- fts_read nftw
- fts_children ftw64
- fts_set nftw64
- fts_close
+ bool "Access functions for 'fstab'"
+ default y
+ help
+ This option group includes functions for reading the mount
+ point specification table, '/etc/fstab'. These functions are
+ not included in the POSIX standard, which provides the
+ 'getmntent' family of functions instead.
+
+ This option group includes the following functions:
+
+ endfsent getfsspec
+ getfsent setfsent
+ getfsfile
+
+
+config EGLIBC_OPTION_EGLIBC_FTRAVERSE
+ bool "Functions for traversing file hierarchies"
+ default y
+ depends EGLIBC_VERSION_2_10 || EGLIBC_VERSION_2_11 || EGLIBC_VERSION_2_12
+ help
+ This option group includes functions for traversing file
+ UNIX file hierachies.
+
+ This option group includes the following functions:
+
+ fts_open ftw
+ fts_read nftw
+ fts_children ftw64
+ fts_set nftw64
+ fts_close
+
config EGLIBC_OPTION_EGLIBC_GETLOGIN
- bool "The getlogin function"
- default y
- depends EGLIBC_OPTION_EGLIBC_UTMP
- help
- This function group includes the 'getlogin' and 'getlogin_r'
- functions, which return the user name associated by the login
- activity with the current process's controlling terminal.
-
- With this option group disabled, the 'glob' function will not
- fall back on 'getlogin' to find the user's login name for tilde
- expansion when the 'HOME' environment variable is not set.
+ bool "The getlogin function"
+ default y
+ select EGLIBC_OPTION_EGLIBC_UTMP
+ help
+ This function group includes the 'getlogin' and 'getlogin_r'
+ functions, which return the user name associated by the login
+ activity with the current process's controlling terminal.
+
+ With this option group disabled, the 'glob' function will not
+ fall back on 'getlogin' to find the user's login name for tilde
+ expansion when the 'HOME' environment variable is not set.
+
+
+config EGLIBC_OPTION_EGLIBC_IDN
+ bool "International domain names support"
+ default y
+ depends EGLIBC_VERSION_2_12
+ help
+ This option group includes the `libcidn' library which
+ provides support for international domain names.
+
config EGLIBC_OPTION_EGLIBC_INET
- bool "Networking support"
- default y
- help
- This option group includes networking-specific functions and
- data. With EGLIBC_INET disabled, the EGLIBC
- installation and API changes as follows:
-
- - The following libraries are not installed:
-
- libanl
- libnsl
- libnss_compat
- libnss_dns
- libnss_hesiod
- libnss_nis
- libnss_nisplus
- libresolv
-
- - The following functions and variables are omitted from libc:
-
- authdes_create hstrerror svc_fdset
- authdes_getucred htonl svc_getreq
- authdes_pk_create htons svc_getreq_common
- authnone_create if_freenameindex svc_getreq_poll
- authunix_create if_indextoname svc_getreqset
- authunix_create_default if_nameindex svc_max_pollfd
- bindresvport if_nametoindex svc_pollfd
- callrpc in6addr_any svcraw_create
- cbc_crypt in6addr_loopback svc_register
- clnt_broadcast inet6_opt_append svc_run
- clnt_create inet6_opt_find svc_sendreply
- clnt_pcreateerror inet6_opt_finish svctcp_create
- clnt_perrno inet6_opt_get_val svcudp_bufcreate
- clnt_perror inet6_opt_init svcudp_create
- clntraw_create inet6_alloc svcudp_enablecache
- clnt_spcreateerror inet6_append svcunix_create
- clnt_sperrno inet6_find svcunixfd_create
- clnt_sperror inet6_init svc_unregister
- clnttcp_create inet6_next user2netname
- clntudp_bufcreate inet6_space xdecrypt
- clntudp_create inet6_opt_next xdr_accepted_reply
- clntunix_create inet6_opt_set_val xdr_array
- des_setparity inet6_rth_add xdr_authdes_cred
- ecb_crypt inet6_rth_getaddr xdr_authdes_verf
- endaliasent inet6_rth_init xdr_authunix_parms
- endhostent inet6_rth_reverse xdr_bool
- endnetent inet6_rth_segments xdr_bytes
- endnetgrent inet6_rth_space xdr_callhdr
- endprotoent inet_addr xdr_callmsg
- endrpcent inet_aton xdr_char
- endservent inet_lnaof xdr_cryptkeyarg
- ether_aton inet_makeaddr xdr_cryptkeyarg2
- ether_aton_r inet_netof xdr_cryptkeyres
- ether_hostton inet_network xdr_des_block
- ether_line inet_nsap_addr xdr_double
- ether_ntoa inet_nsap_ntoa xdr_enum
- ether_ntoa_r inet_ntoa xdr_float
- ether_ntohost inet_ntop xdr_free
- freeaddrinfo inet_pton xdr_getcredres
- freeifaddrs innetgr xdr_hyper
- gai_strerror iruserok xdr_int
- getaddrinfo iruserok_af xdr_int16_t
- getaliasbyname key_decryptsession xdr_int32_t
- getaliasbyname_r key_decryptsession_pk xdr_int64_t
- getaliasent key_encryptsession xdr_int8_t
- getaliasent_r key_encryptsession_pk xdr_keybuf
- gethostbyaddr key_gendes xdr_key_netstarg
- gethostbyaddr_r key_get_conv xdr_key_netstres
- gethostbyname key_secretkey_is_set xdr_keystatus
- gethostbyname2 key_setnet xdr_long
- gethostbyname2_r key_setsecret xdr_longlong_t
- gethostbyname_r netname2host xdrmem_create
- gethostent netname2user xdr_netnamestr
- gethostent_r ntohl xdr_netobj
- getifaddrs ntohs xdr_opaque
- getipv4sourcefilter passwd2des xdr_opaque_auth
- get_myaddress pmap_getmaps xdr_pmap
- getnameinfo pmap_getport xdr_pmaplist
- getnetbyaddr pmap_rmtcall xdr_pointer
- getnetbyaddr_r pmap_set xdr_quad_t
- getnetbyname pmap_unset xdrrec_create
- getnetbyname_r rcmd xdrrec_endofrecord
- getnetent rcmd_af xdrrec_eof
- getnetent_r registerrpc xdrrec_skiprecord
- getnetgrent res_init xdr_reference
- getnetgrent_r rexec xdr_rejected_reply
- getnetname rexec_af xdr_replymsg
- getprotobyname rexecoptions xdr_rmtcall_args
- getprotobyname_r rpc_createerr xdr_rmtcallres
- getprotobynumber rresvport xdr_short
- getprotobynumber_r rresvport_af xdr_sizeof
- getprotoent rtime xdrstdio_create
- getprotoent_r ruserok xdr_string
- getpublickey ruserok_af xdr_u_char
- getrpcbyname ruserpass xdr_u_hyper
- getrpcbyname_r setaliasent xdr_u_int
- getrpcbynumber sethostent xdr_uint16_t
- getrpcbynumber_r setipv4sourcefilter xdr_uint32_t
- getrpcent setnetent xdr_uint64_t
- getrpcent_r setnetgrent xdr_uint8_t
- getrpcport setprotoent xdr_u_long
- getsecretkey setrpcent xdr_u_longlong_t
- getservbyname setservent xdr_union
- getservbyname_r setsourcefilter xdr_unixcred
- getservbyport svcauthdes_stats xdr_u_quad_t
- getservbyport_r svcerr_auth xdr_u_short
- getservent svcerr_decode xdr_vector
- getservent_r svcerr_noproc xdr_void
- getsourcefilter svcerr_noprog xdr_wrapstring
- h_errlist svcerr_progvers xencrypt
- h_errno svcerr_systemerr xprt_register
- herror svcerr_weakauth xprt_unregister
- h_nerr svc_exit
- host2netname svcfd_create
-
- - The rpcgen, nscd, and rpcinfo commands are not installed.
-
- - The 'rpc' file (a text file listing RPC services) is not installed.
-
- Socket-related system calls do not fall in this option group,
- because many are also used for other inter-process
- communication mechanisms. For example, the 'syslog' routines
- use Unix-domain sockets to communicate with the syslog daemon;
- syslog is valuable in non-networked contexts.
+ bool "Networking support"
+ default y
+ help
+ This option group includes networking-specific functions and
+ data. With EGLIBC_OPTION_EGLIBC_INET disabled, the EGLIBC
+ installation and API changes as follows:
+
+ - The following libraries are not installed:
+
+ libanl
+ libnsl
+ libnss_compat
+ libnss_dns
+ libnss_hesiod
+ libnss_nis
+ libnss_nisplus
+ libresolv
+
+ - The following functions and variables are omitted from libc:
+
+ authdes_create hstrerror svc_fdset
+ authdes_getucred htonl svc_getreq
+ authdes_pk_create htons svc_getreq_common
+ authnone_create if_freenameindex svc_getreq_poll
+ authunix_create if_indextoname svc_getreqset
+ authunix_create_default if_nameindex svc_max_pollfd
+ bindresvport if_nametoindex svc_pollfd
+ callrpc in6addr_any svcraw_create
+ cbc_crypt in6addr_loopback svc_register
+ clnt_broadcast inet6_opt_append svc_run
+ clnt_create inet6_opt_find svc_sendreply
+ clnt_pcreateerror inet6_opt_finish svctcp_create
+ clnt_perrno inet6_opt_get_val svcudp_bufcreate
+ clnt_perror inet6_opt_init svcudp_create
+ clntraw_create inet6_option_alloc svcudp_enablecache
+ clnt_spcreateerror inet6_option_append svcunix_create
+ clnt_sperrno inet6_option_find svcunixfd_create
+ clnt_sperror inet6_option_init svc_unregister
+ clnttcp_create inet6_option_next user2netname
+ clntudp_bufcreate inet6_option_space xdecrypt
+ clntudp_create inet6_opt_next xdr_accepted_reply
+ clntunix_create inet6_opt_set_val xdr_array
+ des_setparity inet6_rth_add xdr_authdes_cred
+ ecb_crypt inet6_rth_getaddr xdr_authdes_verf
+ endaliasent inet6_rth_init xdr_authunix_parms
+ endhostent inet6_rth_reverse xdr_bool
+ endnetent inet6_rth_segments xdr_bytes
+ endnetgrent inet6_rth_space xdr_callhdr
+ endprotoent inet_addr xdr_callmsg
+ endrpcent inet_aton xdr_char
+ endservent inet_lnaof xdr_cryptkeyarg
+ ether_aton inet_makeaddr xdr_cryptkeyarg2
+ ether_aton_r inet_netof xdr_cryptkeyres
+ ether_hostton inet_network xdr_des_block
+ ether_line inet_nsap_addr xdr_double
+ ether_ntoa inet_nsap_ntoa xdr_enum
+ ether_ntoa_r inet_ntoa xdr_float
+ ether_ntohost inet_ntop xdr_free
+ freeaddrinfo inet_pton xdr_getcredres
+ freeifaddrs innetgr xdr_hyper
+ gai_strerror iruserok xdr_int
+ getaddrinfo iruserok_af xdr_int16_t
+ getaliasbyname key_decryptsession xdr_int32_t
+ getaliasbyname_r key_decryptsession_pk xdr_int64_t
+ getaliasent key_encryptsession xdr_int8_t
+ getaliasent_r key_encryptsession_pk xdr_keybuf
+ gethostbyaddr key_gendes xdr_key_netstarg
+ gethostbyaddr_r key_get_conv xdr_key_netstres
+ gethostbyname key_secretkey_is_set xdr_keystatus
+ gethostbyname2 key_setnet xdr_long
+ gethostbyname2_r key_setsecret xdr_longlong_t
+ gethostbyname_r netname2host xdrmem_create
+ gethostent netname2user xdr_netnamestr
+ gethostent_r ntohl xdr_netobj
+ getifaddrs ntohs xdr_opaque
+ getipv4sourcefilter passwd2des xdr_opaque_auth
+ get_myaddress pmap_getmaps xdr_pmap
+ getnameinfo pmap_getport xdr_pmaplist
+ getnetbyaddr pmap_rmtcall xdr_pointer
+ getnetbyaddr_r pmap_set xdr_quad_t
+ getnetbyname pmap_unset xdrrec_create
+ getnetbyname_r rcmd xdrrec_endofrecord
+ getnetent rcmd_af xdrrec_eof
+ getnetent_r registerrpc xdrrec_skiprecord
+ getnetgrent res_init xdr_reference
+ getnetgrent_r rexec xdr_rejected_reply
+ getnetname rexec_af xdr_replymsg
+ getprotobyname rexecoptions xdr_rmtcall_args
+ getprotobyname_r rpc_createerr xdr_rmtcallres
+ getprotobynumber rresvport xdr_short
+ getprotobynumber_r rresvport_af xdr_sizeof
+ getprotoent rtime xdrstdio_create
+ getprotoent_r ruserok xdr_string
+ getpublickey ruserok_af xdr_u_char
+ getrpcbyname ruserpass xdr_u_hyper
+ getrpcbyname_r setaliasent xdr_u_int
+ getrpcbynumber sethostent xdr_uint16_t
+ getrpcbynumber_r setipv4sourcefilter xdr_uint32_t
+ getrpcent setnetent xdr_uint64_t
+ getrpcent_r setnetgrent xdr_uint8_t
+ getrpcport setprotoent xdr_u_long
+ getsecretkey setrpcent xdr_u_longlong_t
+ getservbyname setservent xdr_union
+ getservbyname_r setsourcefilter xdr_unixcred
+ getservbyport svcauthdes_stats xdr_u_quad_t
+ getservbyport_r svcerr_auth xdr_u_short
+ getservent svcerr_decode xdr_vector
+ getservent_r svcerr_noproc xdr_void
+ getsourcefilter svcerr_noprog xdr_wrapstring
+ h_errlist svcerr_progvers xencrypt
+ h_errno svcerr_systemerr xprt_register
+ herror svcerr_weakauth xprt_unregister
+ h_nerr svc_exit
+ host2netname svcfd_create
+
+ - The rpcgen, nscd, and rpcinfo commands are not installed.
+
+ - The 'rpc' file (a text file listing RPC services) is not installed.
+
+ Socket-related system calls do not fall in this option group,
+ because many are also used for other inter-process
+ communication mechanisms. For example, the 'syslog' routines
+ use Unix-domain sockets to communicate with the syslog daemon;
+ syslog is valuable in non-networked contexts.
+
+
+config EGLIBC_OPTION_EGLIBC_INET_ANL
+ bool "Asynchronous name lookup"
+ default y
+ depends EGLIBC_VERSION_2_12
+ select EGLIBC_OPTION_EGLIBC_INET
+ help
+ This option group includes the `libanl' library which
+ provides support for asynchronous name lookup.
+
config EGLIBC_OPTION_EGLIBC_LIBM
- bool "libm (math library)"
- default y
- help
- This option group includes the 'libm' library, containing
- mathematical functions. If this option group is omitted, then
- an EGLIBC installation does not include shared or unshared versions
- of the math library.
-
- Note that this does not remove all floating-point related
- functionality from EGLIBC; for example, 'printf' and 'scanf'
- can still print and read floating-point values with this option
- group disabled.
-
- Note that the ISO Standard C++ library 'libstdc++' depends on
- EGLIBC's math library 'libm'. If you disable this option
- group, you will not be able to build 'libstdc++' against the
- resulting EGLIBC installation.
+ bool "libm (math library)"
+ default y
+ help
+ This option group includes the 'libm' library, containing
+ mathematical functions. If this option group is omitted, then
+ an EGLIBC installation does not include shared or unshared versions
+ of the math library.
+
+ Note that this does not remove all floating-point related
+ functionality from EGLIBC; for example, 'printf' and 'scanf'
+ can still print and read floating-point values with this option
+ group disabled.
+
+ Note that the ISO Standard C++ library 'libstdc++' depends on
+ EGLIBC's math library 'libm'. If you disable this option
+ group, you will not be able to build 'libstdc++' against the
+ resulting EGLIBC installation.
+
+
+config EGLIBC_OPTION_EGLIBC_LIBM_BIG
+ bool "Math library size"
+ default y
+ depends EGLIBC_VERSION_2_12
+ help
+ This option group enables default configuration of the math library.
+ Not selecting this option group removes most of the extended and
+ double precision math functions and replaces them with wrappers
+ to the single precision couterparts.
+ Doing so greatly degrades quality of calculations carried
+ out by the functions of the math library, but also significantly
+ reduces the size of the libm.
+ This option group is useful for systems that do not rely on precise
+ floating point math.
+
config EGLIBC_OPTION_EGLIBC_LOCALES
- bool "Locale definitions"
- default y
- help
- This option group includes all locale definitions other than
- that for the "C" locale. If this option group is omitted, then
- only the "C" locale is supported.
+ bool "Locale definitions"
+ default y
+ help
+ This option group includes all locale definitions other than
+ that for the "C" locale. If this option group is omitted, then
+ only the "C" locale is supported.
config EGLIBC_OPTION_EGLIBC_LOCALE_CODE
- bool "Locale functions"
- default y
- depends EGLIBC_OPTION_POSIX_C_LANG_WIDE_CHAR
- help
- This option group includes locale support functions, programs,
- and libraries. With EGLIBC_LOCALE_FUNCTIONS disabled,
- EGLIBC supports only the 'C' locale (also known as 'POSIX'),
- and ignores the settings of the 'LANG' and 'LC_*' environment
- variables.
-
- With EGLIBC_LOCALE_CODE disabled, the following
- functions are omitted from libc:
+ bool "Locale functions"
+ default y
+ select EGLIBC_OPTION_POSIX_C_LANG_WIDE_CHAR if EGLIBC_VERSION_2_8 || EGLIBC_VERSION_2_9 || EGLIBC_VERSION_2_10 || EGLIBC_VERSION_2_11 || EGLIBC_VERSION_2_12
+ help
+ This option group includes locale support functions, programs,
+ and libraries. With EGLIBC_OPTION_EGLIBC_LOCALE_CODE disabled,
+ EGLIBC supports only the 'C' locale (also known as 'POSIX'),
+ and ignores the settings of the 'LANG' and 'LC_*' environment
+ variables.
+
+ With EGLIBC_OPTION_EGLIBC_LOCALE_CODE disabled, the following
+ functions are omitted from libc:
+
+ duplocale localeconv nl_langinfo rpmatch strfmon_l
+ freelocale newlocale nl_langinfo_l strfmon uselocale
+
+ Furthermore, only the LC_CTYPE and LC_TIME categories of the
+ standard "C" locale are available.
+
+ The EGLIBC_OPTION_EGLIBC_CATGETS option group depends on this option
+ group; if you disable EGLIBC_OPTION_EGLIBC_LOCALE_CODE, you must also
+ disable EGLIBC_OPTION_EGLIBC_CATGETS.
+
+
+config EGLIBC_OPTION_EGLIBC_MEMUSAGE
+ bool "Memory profiling library"
+ default y
+ depends EGLIBC_VERSION_2_11 || EGLIBC_VERSION_2_12
+ help
+ This option group includes the `libmemusage' library and
+ the `memusage' and `memusagestat' utilities.
+ These components provide memory profiling functions.
+
+ EGLIBC_OPTION_EGLIBC_MEMUSAGE_DEFAULT_BUFFER_SIZE
+
+ Libmemusage library buffers the profiling data in memory
+ before writing it out to disk. By default, the library
+ allocates 1.5M buffer, which can be substantial for some
+ systems. EGLIBC_OPTION_EGLIBC_MEMUSAGE_DEFAULT_BUFFER_SIZE option
+ allows to change the default buffer size. It specifies
+ the number of entries the buffer should have.
+ On most architectures one buffer entry amounts to 48 bytes,
+ so setting this option to the value of 512 will reduce the size of
+ the memory buffer to 24K.
- duplocale localeconv nl_langinfo rpmatch strfmon_l
- freelocale newlocale nl_langinfo_l strfmon uselocale
- Furthermore, only the LC_CTYPE and LC_TIME categories of the
- standard "C" locale are available.
+config EGLIBC_OPTION_EGLIBC_NIS
+ bool "Support for NIS, NIS+, and the special 'compat' services."
+ default y
+ select EGLIBC_OPTION_EGLIBC_INET
+ select EGLIBC_OPTION_EGLIBC_SUNRPC
+ help
+ This option group includes the NIS, NIS+, and 'compat' Name
+ Service Switch service libraries. When it is disabled, those
+ services libraries are not installed; you should remove any
+ references to them from your 'nsswitch.conf' file.
- The EGLIBC_CATGETS option group depends on this option
- group; if you disable EGLIBC_LOCALE_CODE, you must also
- disable EGLIBC_CATGETS.
+ This option group depends on the EGLIBC_OPTION_EGLIBC_INET option
+ group; you must enable that to enable this option group.
-config EGLIBC_OPTION_EGLIBC_NIS
- bool "Support for NIS, NIS+, and the special 'compat' services."
- default y
- depends EGLIBC_OPTION_EGLIBC_INET
- depends EGLIBC_OPTION_EGLIBC_SUNRPC
- help
- This option group includes the NIS, NIS+, and 'compat' Name
- Service Switch service libraries. When it is disabled, those
- services libraries are not installed; you should remove any
- references to them from your 'nsswitch.conf' file.
-
- This option group depends on the EGLIBC_INET option
- group; you must enable that to enable this option group.
config EGLIBC_OPTION_EGLIBC_NSSWITCH
- bool "Name service switch (nsswitch) support"
- default y
- help
-
- This option group includes support for the 'nsswitch' facility.
- With this option group enabled, all EGLIBC functions for
- accessing various system databases (passwords and groups;
- networking; aliases; public keys; and so on) consult the
- '/etc/nsswitch.conf' configuration file to decide how to handle
- queries.
-
- With this option group disabled, EGLIBC uses a fixed list of
- services to satisfy queries on each database, as requested by
- configuration files specified when EGLIBC is built. Your
- 'option-groups.config' file must set the following two
- variables:
-
- EGLIBC_NSSWITCH_FIXED_CONFIG
-
- Set this to the name of a file whose contents observe the
- same syntax as an ordinary '/etc/nsswitch.conf' file. The
- EGLIBC build process parses this file just as EGLIBC would
- at run time if EGLIBC_NSSWITCH were enabled, and
- produces a C library that uses the nsswitch service
- libraries to search for database entries as this file
- specifies, instead of consulting '/etc/nsswitch.conf' at run
- time.
-
- This should be an absolute filename. The EGLIBC build
- process may use it from several different working
- directories. It may include references to Makefile
- variables like 'common-objpfx' (the top of the build tree,
- with a trailing slash), or '..' (the top of the source tree,
- with a trailing slash).
-
- The EGLIBC source tree includes a sample configuration file
- named 'nss/fixed-nsswitch.conf'; for simple configurations,
- you will probably want to delete references to databases not
- needed on your system.
-
- EGLIBC_NSSWITCH_FIXED_FUNCTIONS
-
- The EGLIBC build process uses this file to decide which
- functions to make available from which service libraries.
- The file 'nss/fixed-nsswitch.functions' serves as a sample
- configuration file for this setting, and explains its syntax
- and meaning in more detail.
-
- This should be an absolute file name. The EGLIBC build
- process may use it from several different working
- directories. It may include references to Makefile
- variables like 'common-objpfx' (the top of the build tree,
- with a trailing slash), or '..' (the top of the source tree,
- with a trailing slash).
-
- Be sure to mention each function in each service you wish to
- use. If you do not mention a service's function here, the
- EGLIBC database access functions will not find it, even if
- it is listed in the EGLIBC_NSSWITCH_FIXED_CONFIG
- file.
-
- In this arrangement, EGLIBC will not use the 'dlopen' and
- 'dlsym' functions to find database access functions. Instead,
- libc hard-codes references to the service libraries' database
- access functions. You must explicitly link your program
- against the name service libraries (those whose names start
- with 'libnss_', in the sysroot's '/lib' directory) whose
- functions you intend to use. This arrangement helps
- system-wide static analysis tools decide which functions a
- system actually uses.
-
- Note that some nsswitch service libraries require other option
- groups to be enabled; for example, the EGLIBC_INET
- option group must be enabled to use the 'libnss_dns.so.2'
- service library, which uses the Domain Name System network
- protocol to answer queries.
+ bool "Name service switch (nsswitch) support"
+ default y
+ select EGLIBC_OPTION_EGLIBC_INET
+ help
+
+ This option group includes support for the 'nsswitch' facility.
+ With this option group enabled, all EGLIBC functions for
+ accessing various system databases (passwords and groups;
+ networking; aliases; public keys; and so on) consult the
+ '/etc/nsswitch.conf' configuration file to decide how to handle
+ queries.
+
+ With this option group disabled, EGLIBC uses a fixed list of
+ services to satisfy queries on each database, as requested by
+ configuration files specified when EGLIBC is built. Your
+ 'option-groups.config' file must set the following two
+ variables:
+
+ EGLIBC_OPTION_EGLIBC_NSSWITCH_FIXED_CONFIG
+
+ Set this to the name of a file whose contents observe the
+ same syntax as an ordinary '/etc/nsswitch.conf' file. The
+ EGLIBC build process parses this file just as EGLIBC would
+ at run time if EGLIBC_NSSWITCH were enabled, and
+ produces a C library that uses the nsswitch service
+ libraries to search for database entries as this file
+ specifies, instead of consulting '/etc/nsswitch.conf' at run
+ time.
+
+ This should be an absolute filename. The EGLIBC build
+ process may use it from several different working
+ directories. It may include references to Makefile
+ variables like 'common-objpfx' (the top of the build tree,
+ with a trailing slash), or '..' (the top of the source tree,
+ with a trailing slash).
+
+ The EGLIBC source tree includes a sample configuration file
+ named 'nss/fixed-nsswitch.conf'; for simple configurations,
+ you will probably want to delete references to databases not
+ needed on your system.
+
+ EGLIBC_OPTION_EGLIBC_NSSWITCH_FIXED_FUNCTIONS
+
+ The EGLIBC build process uses this file to decide which
+ functions to make available from which service libraries.
+ The file 'nss/fixed-nsswitch.functions' serves as a sample
+ configuration file for this setting, and explains its syntax
+ and meaning in more detail.
+
+ This should be an absolute file name. The EGLIBC build
+ process may use it from several different working
+ directories. It may include references to Makefile
+ variables like 'common-objpfx' (the top of the build tree,
+ with a trailing slash), or '..' (the top of the source tree,
+ with a trailing slash).
+
+ Be sure to mention each function in each service you wish to
+ use. If you do not mention a service's function here, the
+ EGLIBC database access functions will not find it, even if
+ it is listed in the EGLIBC_OPTION_EGLIBC_NSSWITCH_FIXED_CONFIG
+ file.
+
+ In this arrangement, EGLIBC will not use the 'dlopen' and
+ 'dlsym' functions to find database access functions. Instead,
+ libc hard-codes references to the service libraries' database
+ access functions. You must explicitly link your program
+ against the name service libraries (those whose names start
+ with 'libnss_', in the sysroot's '/lib' directory) whose
+ functions you intend to use. This arrangement helps
+ system-wide static analysis tools decide which functions a
+ system actually uses.
+
+ Note that some nsswitch service libraries require other option
+ groups to be enabled; for example, the EGLIBC_OPTION_EGLIBC_INET
+ option group must be enabled to use the 'libnss_dns.so.2'
+ service library, which uses the Domain Name System network
+ protocol to answer queries.
+
config EGLIBC_OPTION_EGLIBC_RCMD
- bool "Support for 'rcmd' and related library functions"
- default y
- depends EGLIBC_OPTION_EGLIBC_INET
- help
- This option group includes functions for running commands on
- remote machines via the 'rsh' protocol, and doing authentication
- related to those functions. This also includes functions that
- use the 'rexec' protocol.
-
- This option group includes the following functions:
-
- rcmd ruserok
- rcmd_af ruserok_af
- rexec iruserok
- rexec_af iruserok_af
- rresvport ruserpass
- rresvport_af
-
+ bool "Support for 'rcmd' and related library functions"
+ default y
+ select EGLIBC_OPTION_EGLIBC_INET
+ help
+ This option group includes functions for running commands on
+ remote machines via the 'rsh' protocol, and doing authentication
+ related to those functions. This also includes functions that
+ use the 'rexec' protocol.
+
+ This option group includes the following functions:
+
+ rcmd ruserok
+ rcmd_af ruserok_af
+ rexec iruserok
+ rexec_af iruserok_af
+ rresvport ruserpass
+ rresvport_af
+
+
+config EGLIBC_OPTION_EGLIBC_RTLD_DEBUG
+ bool "Runtime linker debug print outs"
+ default y
+ depends EGLIBC_VERSION_2_12
+ help
+ This option group enables debug output of the runtime linker
+ which is activated via LD_DEBUG and LD_TRACE_PRELINKING
+ environment variables. Disabling this option group yields
+ a smaller runtime linker binary.
+ BEWARE: Disabling this option group is likely to break
+ the `ldd' utility which may also be used by the prelinker.
+ In particular, the `--unused' ldd option will not work correctly.
+
+
config EGLIBC_OPTION_EGLIBC_SPAWN
- bool "Support for POSIX posix_spawn functions"
- default y
- help
- This option group includes the POSIX functions for executing
- programs in child processes without using 'fork' or 'vfork'.
-
- This option group includes the following functions:
-
- posix_spawn
- posix_spawnattr_destroy
- posix_spawnattr_getflags
- posix_spawnattr_getpgroup
- posix_spawnattr_getschedparam
- posix_spawnattr_getschedpolicy
- posix_spawnattr_getsigdefault
- posix_spawnattr_getsigmask
- posix_spawnattr_init
- posix_spawnattr_setflags
- posix_spawnattr_setpgroup
- posix_spawnattr_setschedparam
- posix_spawnattr_setschedpolicy
- posix_spawnattr_setsigdefault
- posix_spawnattr_setsigmask
- posix_spawn_file_actions_addclose
- posix_spawn_file_actions_adddup2
- posix_spawn_file_actions_addopen
- posix_spawn_file_actions_destroy
- posix_spawn_file_actions_init
- posix_spawnp
-
- This option group also provides the ability for the iconv,
- localedef, and locale programs to operate transparently on
- compressed charset definitions. When this option group is
- disabled, those programs will only operate on uncompressed
- charmap files.
+ bool "Support for POSIX posix_spawn functions"
+ default y
+ help
+ This option group includes the POSIX functions for executing
+ programs in child processes without using 'fork' or 'vfork'.
+
+ This option group includes the following functions:
+
+ posix_spawn
+ posix_spawnattr_destroy
+ posix_spawnattr_getflags
+ posix_spawnattr_getpgroup
+ posix_spawnattr_getschedparam
+ posix_spawnattr_getschedpolicy
+ posix_spawnattr_getsigdefault
+ posix_spawnattr_getsigmask
+ posix_spawnattr_init
+ posix_spawnattr_setflags
+ posix_spawnattr_setpgroup
+ posix_spawnattr_setschedparam
+ posix_spawnattr_setschedpolicy
+ posix_spawnattr_setsigdefault
+ posix_spawnattr_setsigmask
+ posix_spawn_file_actions_addclose
+ posix_spawn_file_actions_adddup2
+ posix_spawn_file_actions_addopen
+ posix_spawn_file_actions_destroy
+ posix_spawn_file_actions_init
+ posix_spawnp
+
+ This option group also provides the ability for the iconv,
+ localedef, and locale programs to operate transparently on
+ compressed charset definitions. When this option group is
+ disabled, those programs will only operate on uncompressed
+ charmap files.
+
config EGLIBC_OPTION_EGLIBC_STREAMS
- bool "Support for accessing STREAMS."
- default y
- help
- This option group includes functions for reading and writing
- messages to and from STREAMS. The STREAMS interface provides a
- uniform mechanism for implementing networking services and other
- character-based I/O. (STREAMS are not to be confused with
- <stdio.h> FILE objects, also called 'streams'.)
-
- This option group includes the following functions:
-
- getmsg putpmsg
- getpmsg fattach
- isastream fdetach
- putmsg
+ bool "Support for accessing STREAMS."
+ default y
+ help
+ This option group includes functions for reading and writing
+ messages to and from STREAMS. The STREAMS interface provides a
+ uniform mechanism for implementing networking services and other
+ character-based I/O. (STREAMS are not to be confused with
+ <stdio.h> FILE objects, also called 'streams'.)
+
+ This option group includes the following functions:
+
+ getmsg putpmsg
+ getpmsg fattach
+ isastream fdetach
+ putmsg
+
config EGLIBC_OPTION_EGLIBC_SUNRPC
- bool "Support for the Sun 'RPC' protocol."
- default y
- depends EGLIBC_OPTION_EGLIBC_INET
- help
- This option group includes support for the Sun RPC protocols,
- including the 'rpcgen' and 'rpcinfo' programs.
+ bool "Support for the Sun 'RPC' protocol."
+ default y
+ select EGLIBC_OPTION_EGLIBC_INET
+ help
+ This option group includes support for the Sun RPC protocols,
+ including the 'rpcgen' and 'rpcinfo' programs.
+
config EGLIBC_OPTION_EGLIBC_UTMP
- bool "Older access functions for 'utmp' login records"
- default y
- help
- This option group includes the older 'utent' family of
- functions for accessing user login records in the 'utmp' file.
- POSIX omits these functions in favor of the 'utxent' family,
- and they are obsolete on systems other than Linux.
-
- This option group includes the following functions:
-
- endutent
- getutent
- getutent_r
- getutid
- getutid_r
- getutline
- getutline_r
- logwtmp
- pututline
- setutent
- updwtmp
- utmpname
-
- This option group includes the following libraries:
-
- libutil.so (and libutil.a)
+ bool "Older access functions for 'utmp' login records"
+ default y
+ help
+ This option group includes the older 'utent' family of
+ functions for accessing user login records in the 'utmp' file.
+ POSIX omits these functions in favor of the 'utxent' family,
+ and they are obsolete on systems other than Linux.
+
+ This option group includes the following functions:
+
+ endutent
+ getutent
+ getutent_r
+ getutid
+ getutid_r
+ getutline
+ getutline_r
+ logwtmp
+ pututline
+ setutent
+ updwtmp
+ utmpname
+
+ This option group includes the following libraries:
+
+ libutil.so (and libutil.a)
+
config EGLIBC_OPTION_EGLIBC_UTMPX
- bool "POSIX access functions for 'utmp' login records"
- default y
- depends EGLIBC_OPTION_EGLIBC_UTMP
- help
- This option group includes the POSIX functions for reading and
- writing user login records in the 'utmp' file (usually
- '/var/run/utmp'). The POSIX functions operate on 'struct
- utmpx' structures, as opposed to the family of older 'utent'
- functions, which operate on 'struct utmp' structures.
-
- This option group includes the following functions:
-
- endutxent
- getutmp
- getutmpx
- getutxent
- getutxid
- getutxline
- pututxline
- setutxent
- updwtmpx
- utmpxname
+ bool "POSIX access functions for 'utmp' login records"
+ default y
+ select EGLIBC_OPTION_EGLIBC_UTMP
+ help
+ This option group includes the POSIX functions for reading and
+ writing user login records in the 'utmp' file (usually
+ '/var/run/utmp'). The POSIX functions operate on 'struct
+ utmpx' structures, as opposed to the family of older 'utent'
+ functions, which operate on 'struct utmp' structures.
+
+ This option group includes the following functions:
+
+ endutxent
+ getutmp
+ getutmpx
+ getutxent
+ getutxid
+ getutxline
+ pututxline
+ setutxent
+ updwtmpx
+ utmpxname
+
config EGLIBC_OPTION_EGLIBC_WORDEXP
- bool "Shell-style word expansion"
- default y
- help
- This option group includes the 'wordexp' function for
- performing word expansion in the manner of the shell, and the
- accompanying 'wordfree' function.
+ bool "Shell-style word expansion"
+ default y
+ help
+ This option group includes the 'wordexp' function for
+ performing word expansion in the manner of the shell, and the
+ accompanying 'wordfree' function.
+
config EGLIBC_OPTION_POSIX_C_LANG_WIDE_CHAR
- bool "ISO C library wide character functions, excluding I/O"
- default y
- help
- This option group includes the functions defined by the ISO C
- standard for working with wide and multibyte characters in
- memory. Functions for reading and writing wide and multibyte
- characters from and to files call in the
- POSIX_WIDE_CHAR_DEVICE_IO option group.
-
- This option group includes the following functions:
-
- btowc mbsinit wcscspn wcstoll
- iswalnum mbsrtowcs wcsftime wcstombs
- iswalpha mbstowcs wcslen wcstoul
- iswblank mbtowc wcsncat wcstoull
- iswcntrl swprintf wcsncmp wcstoumax
- iswctype swscanf wcsncpy wcsxfrm
- iswdigit towctrans wcspbrk wctob
- iswgraph towlower wcsrchr wctomb
- iswlower towupper wcsrtombs wctrans
- iswprint vswprintf wcsspn wctype
- iswpunct vswscanf wcsstr wmemchr
- iswspace wcrtomb wcstod wmemcmp
- iswupper wcscat wcstof wmemcpy
- iswxdigit wcschr wcstoimax wmemmove
- mblen wcscmp wcstok wmemset
- mbrlen wcscoll wcstol
- mbrtowc wcscpy wcstold
+ bool "ISO C library wide character functions, excluding I/O"
+ default y
+ depends EGLIBC_VERSION_2_8 || EGLIBC_VERSION_2_9 || EGLIBC_VERSION_2_10 || EGLIBC_VERSION_2_11 || EGLIBC_VERSION_2_12
+ help
+ This option group includes the functions defined by the ISO C
+ standard for working with wide and multibyte characters in
+ memory. Functions for reading and writing wide and multibyte
+ characters from and to files call in the
+ EGLIBC_OPTION_POSIX_WIDE_CHAR_DEVICE_IO option group.
+
+ This option group includes the following functions:
+
+ btowc mbsinit wcscspn wcstoll
+ iswalnum mbsrtowcs wcsftime wcstombs
+ iswalpha mbstowcs wcslen wcstoul
+ iswblank mbtowc wcsncat wcstoull
+ iswcntrl swprintf wcsncmp wcstoumax
+ iswctype swscanf wcsncpy wcsxfrm
+ iswdigit towctrans wcspbrk wctob
+ iswgraph towlower wcsrchr wctomb
+ iswlower towupper wcsrtombs wctrans
+ iswprint vswprintf wcsspn wctype
+ iswpunct vswscanf wcsstr wmemchr
+ iswspace wcrtomb wcstod wmemcmp
+ iswupper wcscat wcstof wmemcpy
+ iswxdigit wcschr wcstoimax wmemmove
+ mblen wcscmp wcstok wmemset
+ mbrlen wcscoll wcstol
+ mbrtowc wcscpy wcstold
+
config EGLIBC_OPTION_POSIX_REGEXP
- bool "Regular expressions"
- default y
- help
- This option group includes the POSIX regular expression
- functions, and the associated non-POSIX extensions and
- compatibility functions.
-
- With POSIX_REGEXP disabled, the following functions are
- omitted from libc:
-
- re_comp re_max_failures regcomp
- re_compile_fastmap re_search regerror
- re_compile_pattern re_search_2 regexec
- re_exec re_set_registers regfree
- re_match re_set_syntax rpmatch
- re_match_2 re_syntax_options
-
- Furthermore, the compatibility regexp interface defined in the
- <regexp.h> header file, 'compile', 'step', and 'advance', is
- omitted.
+ bool "Regular expressions"
+ default y
+ help
+ This option group includes the POSIX regular expression
+ functions, and the associated non-POSIX extensions and
+ compatibility functions.
+
+ With EGLIBC_OPTION_POSIX_REGEXP disabled, the following functions are
+ omitted from libc:
+
+ re_comp re_max_failures regcomp
+ re_compile_fastmap re_search regerror
+ re_compile_pattern re_search_2 regexec
+ re_exec re_set_registers regfree
+ re_match re_set_syntax rpmatch
+ re_match_2 re_syntax_options
+
+ Furthermore, the compatibility regexp interface defined in the
+ <regexp.h> header file, 'compile', 'step', and 'advance', is
+ omitted.
+
config EGLIBC_OPTION_POSIX_REGEXP_GLIBC
- bool "Regular expressions from GLIBC"
- default y
- depends EGLIBC_OPTION_POSIX_REGEXP
- depends EGLIBC_VERSION_2_10
- help
- This option group specifies which regular expression
- library to use. The choice is between regex
- implementation from GLIBC and regex implementation from
- libiberty. The GLIBC variant is fully POSIX conformant and
- optimized for speed; regex from libiberty is more than twice
- as small while still is enough for most practical purposes.
+ bool "Regular expressions from GLIBC"
+ default y
+ depends EGLIBC_VERSION_2_10 || EGLIBC_VERSION_2_11 || EGLIBC_VERSION_2_12
+ select EGLIBC_OPTION_POSIX_REGEXP
+ help
+ This option group specifies which regular expression
+ library to use. The choice is between regex
+ implementation from GLIBC and regex implementation from
+ libiberty. The GLIBC variant is fully POSIX conformant and
+ optimized for speed; regex from libiberty is more than twice
+ as small while still is enough for most practical purposes.
+
config EGLIBC_OPTION_POSIX_WIDE_CHAR_DEVICE_IO
- bool "Input and output functions for wide characters"
- default y
- depends EGLIBC_OPTION_POSIX_C_LANG_WIDE_CHAR
- help
- This option group includes functions for reading and writing
- wide characters to and from <stdio.h> streams.
-
- This option group includes the following functions:
-
- fgetwc fwprintf putwchar vwscanf
- fgetws fwscanf ungetwc wprintf
- fputwc getwc vfwprintf wscanf
- fputws getwchar vfwscanf
- fwide putwc vwprintf
-
- This option group further includes the following unlocked
- variants of the above functions:
-
- fgetwc_unlocked getwc_unlocked
- fgetws_unlocked getwchar_unlocked
- fputwc_unlocked putwc_unlocked
- fputws_unlocked putwchar_unlocked
-
- Note that the GNU standard C++ library, 'libstdc++.so', uses
- some of these functions; you will not be able to link or run
- C++ programs if you disable this option group.
-
- This option group also affects the behavior of the following
- functions:
-
- fdopen
- fopen
- fopen64
- freopen
- freopen64
-
- These functions all take an OPENTYPE parameter which may
- contain a string of the form ",ccs=CHARSET", indicating that
- the underlying file uses the character set named CHARSET.
- This produces a wide-oriented stream, which is only useful
- when the functions included in this option group are present.
- If the user attempts to open a file specifying a character set
- in the OPENTYPE parameter, and EGLIBC was built with this
- option group disabled, the function returns NULL, and sets
- errno to EINVAL.
+ bool "Input and output functions for wide characters"
+ default y
+ select EGLIBC_OPTION_POSIX_C_LANG_WIDE_CHAR if EGLIBC_VERSION_2_8 || EGLIBC_VERSION_2_9 || EGLIBC_VERSION_2_10 || EGLIBC_VERSION_2_11 || EGLIBC_VERSION_2_12
+ help
+ This option group includes functions for reading and writing
+ wide characters to and from <stdio.h> streams.
+
+ This option group includes the following functions:
+
+ fgetwc fwprintf putwchar vwscanf
+ fgetws fwscanf ungetwc wprintf
+ fputwc getwc vfwprintf wscanf
+ fputws getwchar vfwscanf
+ fwide putwc vwprintf
+
+ This option group further includes the following unlocked
+ variants of the above functions:
+
+ fgetwc_unlocked getwc_unlocked
+ fgetws_unlocked getwchar_unlocked
+ fputwc_unlocked putwc_unlocked
+ fputws_unlocked putwchar_unlocked
+
+ Note that the GNU standard C++ library, 'libstdc++.so', uses
+ some of these functions; you will not be able to link or run
+ C++ programs if you disable this option group.
+
+ This option group also affects the behavior of the following
+ functions:
+
+ fdopen
+ fopen
+ fopen64
+ freopen
+ freopen64
+
+ These functions all take an OPENTYPE parameter which may
+ contain a string of the form ",ccs=CHARSET", indicating that
+ the underlying file uses the character set named CHARSET.
+ This produces a wide-oriented stream, which is only useful
+ when the functions included in this option group are present.
+ If the user attempts to open a file specifying a character set
+ in the OPENTYPE parameter, and EGLIBC was built with this
+ option group disabled, the function returns NULL, and sets
+ errno to EINVAL.
projects / openwrt.git / blobdiff