use aligned trx for 128kb flash size for netgear, reported by Kaloz

[openwrt.git] / openwrt / target / linux / image / brcm / Makefile

diff --git a/openwrt/target/linux/image/brcm/Makefile b/openwrt/target/linux/image/brcm/Makefile
index 25f4ea9..23072bd 100644 (file)
--- a/openwrt/target/linux/image/brcm/Makefile
+++ b/openwrt/target/linux/image/brcm/Makefile
@@ -1,6 +1,6 @@
 include $(TOPDIR)/rules.mk
 
-KDIR:=$(BUILD_DIR)/linux-$(KERNEL)-brcm
+KDIR:=$(BUILD_DIR)/linux-$(KERNEL)-$(BOARD)
 
 lzma-loader-clean:
        $(MAKE) -C lzma-loader clean
@@ -11,37 +11,69 @@ lzma-loader-prepare:
 lzma-loader-compile: lzma-loader-prepare
        $(MAKE) -C lzma-loader compile
 
+ifeq ($(IB),)
 $(KDIR)/vmlinux.lzma: $(KDIR)/vmlinux
        cat $^ | $(STAGING_DIR)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $@ || (rm -f $@ && false)
 
-$(BIN_DIR)/openwrt-brcm-$(KERNEL)-$(FS).trx: $(KDIR)/vmlinux.lzma
-       $(STAGING_DIR)/bin/trx -o $@ $(BUILD_DIR)/loader.gz $(KDIR)/vmlinux.lzma $(KDIR)/root.$(FS)
+$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).trx: $(KDIR)/vmlinux.lzma compile
+endif
+
+ifeq ($(FS),jffs2-8MB)
+TRXALIGN:=-a 0x20000
+endif
+ifeq ($(FS),jffs2-4MB)
+TRXALIGN:=-a 0x10000
+endif
+$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).trx:
+       $(STAGING_DIR)/bin/trx -o $@ $(BUILD_DIR)/loader.gz $(KDIR)/vmlinux.lzma $(TRXALIGN) $(KDIR)/root.$(FS)
+
+ifeq ($(KERNEL),2.6)
+FSNAME:=$(patsubst jffs2-%,jffs2,$(FS))
+
+ifneq ($(FS),jffs2-4MB)
+$(BIN_DIR)/openwrt-wgt634u-$(KERNEL)-$(FSNAME).bin: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).trx
+       dd if=$(BUILD_DIR)/loader.elf of=$@ bs=131072 conv=sync
+       cat $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).trx >> $@
+
+install: $(BIN_DIR)/openwrt-wgt634u-$(KERNEL)-$(FSNAME).bin
+endif
+endif
 
 ifeq ($(KERNEL),2.4)
 FSNAME:=$(patsubst jffs2-%,jffs2,$(FS))
 
 ifneq ($(FS),jffs2-8MB)
-$(BIN_DIR)/openwrt-wrt54g-$(FSNAME).bin: $(BIN_DIR)/openwrt-brcm-$(KERNEL)-$(FS).trx
-       $(STAGING_DIR)/bin/addpattern -2 -i $< -o $@ -g
-       $(SED) "1s,^W54S,W54G," $@
+$(BIN_DIR)/openwrt-wrt54g-$(FSNAME).bin: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).trx
+       $(STAGING_DIR)/bin/addpattern -4 -p W54G -v v4.20.6 -i $< -o $@ -g
 
 install: $(BIN_DIR)/openwrt-wrt54g-$(FSNAME).bin
 endif
 
 ifneq ($(FS),jffs2-4MB)
-$(BIN_DIR)/openwrt-wrt54gs-$(FSNAME).bin: $(BIN_DIR)/openwrt-brcm-$(KERNEL)-$(FS).trx
-       $(STAGING_DIR)/bin/addpattern -2 -i $< -o $@ -g
+$(BIN_DIR)/openwrt-wrt54gs-$(FSNAME).bin: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).trx
+       $(STAGING_DIR)/bin/addpattern -4 -p W54S -v v4.70.6 -i $< -o $@ -g
 
 install: $(BIN_DIR)/openwrt-wrt54gs-$(FSNAME).bin
 endif
 
-$(BIN_DIR)/openwrt-motorola-$(FS).bin: $(BIN_DIR)/openwrt-brcm-$(KERNEL)-$(FS).trx
+$(BIN_DIR)/openwrt-motorola-$(FS).bin: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).trx
        $(STAGING_DIR)/bin/motorola-bin $< $@
 install: $(BIN_DIR)/openwrt-motorola-$(FS).bin
 endif
 
+ifeq ($(IB),)
 clean: lzma-loader-clean
 prepare: lzma-loader-prepare
 compile: lzma-loader-compile
-install: compile $(BIN_DIR)/openwrt-brcm-$(KERNEL)-$(FS).trx
-       
+else
+clean:
+prepare:
+compile:
+endif
+install: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).trx
+install-ib:
+       mkdir -p $(IB_DIR)/staging_dir_$(ARCH)/bin
+       cp -fpR $(STAGING_DIR)/bin/addpattern $(STAGING_DIR)/bin/trx $(STAGING_DIR)/bin/motorola-bin $(IB_DIR)/staging_dir_$(ARCH)/bin
+       mkdir -p $(IB_DIR)/build_$(ARCH)/linux-$(KERNEL)-$(BOARD)
+       cp -fpR $(BUILD_DIR)/loader.gz $(IB_DIR)/build_$(ARCH)/
+       cp -fpR $(KDIR)/vmlinux.lzma $(IB_DIR)/build_$(ARCH)/linux-$(KERNEL)-$(BOARD)/