+--- a/arch/cris/Makefile
++++ b/arch/cris/Makefile
+@@ -33,7 +33,7 @@ endif
+
+ LD = $(CROSS_COMPILE)ld -mcrislinux
+
+-OBJCOPYFLAGS := -O binary -R .note -R .comment -S
++OBJCOPYFLAGS := -O binary -R .bss -R .note -R .note.gnu.build-id -R .comment -S
+
+ CPPFLAGS_vmlinux.lds = -DDRAM_VIRTUAL_BASE=0x$(CONFIG_ETRAX_DRAM_VIRTUAL_BASE)
+
--- a/arch/cris/arch-v10/boot/Makefile
+++ b/arch/cris/arch-v10/boot/Makefile
-@@ -2,7 +2,6 @@
+@@ -2,9 +2,6 @@
# arch/cris/arch-v10/boot/Makefile
#
-OBJCOPY = objcopy-cris
- OBJCOPYFLAGS = -O binary --remove-section=.bss
-
+-OBJCOPYFLAGS = -O binary --remove-section=.bss
+-
subdir- := compressed rescue
-@@ -14,7 +13,6 @@
+ targets := Image
+
+@@ -14,7 +11,6 @@ $(obj)/Image: vmlinux FORCE
$(obj)/compressed/vmlinux: $(obj)/Image FORCE
$(Q)$(MAKE) $(build)=$(obj)/compressed $@
@cp $< $@
--- a/arch/cris/arch-v10/boot/compressed/Makefile
+++ b/arch/cris/arch-v10/boot/compressed/Makefile
-@@ -2,12 +2,10 @@
+@@ -2,13 +2,9 @@
# arch/cris/arch-v10/boot/compressed/Makefile
#
-CC = gcc-cris -melf $(LINUXINCLUDE)
ccflags-y += -O2
-LD = ld-cris
-+LD = $(CROSS_COMPILE)ld -m criself
ldflags-y += -T $(obj)/decompress.ld
OBJECTS = $(obj)/head.o $(obj)/misc.o
-OBJCOPY = objcopy-cris
- OBJCOPYFLAGS = -O binary --remove-section=.bss
+-OBJCOPYFLAGS = -O binary --remove-section=.bss
quiet_cmd_image = BUILD $@
-@@ -22,10 +20,10 @@
+ cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@
+@@ -22,10 +18,10 @@ $(obj)/decompress.bin: $(obj)/decompress
$(call if_changed,objcopy)
$(obj)/head.o: $(obj)/head.S .config
- @$(CC) -D__ASSEMBLY__ -traditional -c $< -o $@
-+ @$(CC) -D__ASSEMBLY__ -traditional -Wa,--em=criself -c $< -o $@
++ @$(CC) -Iinclude -D__ASSEMBLY__ -traditional -Wa,--em=criself -c $< -o $@
$(obj)/misc.o: $(obj)/misc.c .config
- @$(CC) -D__KERNEL__ -c $< -o $@
-+ @$(CC) -D__KERNEL__ -Wa,--em=criself -c $< -o $@
++ @$(CC) -Iinclude -D__KERNEL__ -Wa,--em=criself -c $< -o $@
$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
$(call if_changed,image)
---- a/arch/cris/arch-v10/boot/compressed/misc.c
-+++ b/arch/cris/arch-v10/boot/compressed/misc.c
-@@ -5,7 +5,7 @@
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
-- * puts by Nick Holloway 1993, better puts by Martin Mares 1995
-+ * putstr by Nick Holloway 1993, better putstr by Martin Mares 1995
- * adaptation for Linux/CRIS Axis Communications AB, 1999
- *
- */
-@@ -99,12 +99,12 @@
- static void gzip_mark(void **);
- static void gzip_release(void **);
-
--static void puts(const char *);
-+static void putstr(const char *);
-
- /* the "heap" is put directly after the BSS ends, at end */
-
--extern int end;
--static long free_mem_ptr = (long)&end;
-+extern int _end;
-+static long free_mem_ptr = (long)&_end;
-
- #include "../../../../../lib/inflate.c"
-
-@@ -139,7 +139,7 @@
- /* decompressor info and error messages to serial console */
-
- static void
--puts(const char *s)
-+putstr(const char *s)
- {
- #ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
- while(*s) {
-@@ -209,9 +209,9 @@
- static void
- error(char *x)
- {
-- puts("\n\n");
-- puts(x);
-- puts("\n\n -- System halted\n");
-+ putstr("\n\n");
-+ putstr(x);
-+ putstr("\n\n -- System halted\n");
-
- while(1); /* Halt */
- }
-@@ -257,14 +257,7 @@
-
- makecrc();
-
-- __asm__ volatile ("move vr,%0" : "=rm" (revision));
-- if (revision < 10)
-- {
-- puts("You need an ETRAX 100LX to run linux 2.6\n");
-- while(1);
-- }
--
-- puts("Uncompressing Linux...\n");
-+ putstr("Uncompressing Linux...\n");
- gunzip();
-- puts("Done. Now booting the kernel.\n");
-+ putstr("Done. Now booting the kernel.\n");
- }
---- a/arch/cris/arch-v10/mm/init.c
-+++ b/arch/cris/arch-v10/mm/init.c
-@@ -184,6 +184,9 @@
-
- free_area_init_node(0, &contig_page_data, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
- }
-+void free_initrd_mem(unsigned long start, unsigned long end)
-+{
-+}
+--- a/arch/cris/arch-v10/boot/compressed/decompress.ld
++++ b/arch/cris/arch-v10/boot/compressed/decompress.ld
+@@ -1,4 +1,4 @@
+-OUTPUT_FORMAT(elf32-us-cris)
++OUTPUT_FORMAT(elf32-cris)
- /* Initialize remaps of some I/O-ports. It is important that this
- * is called before any driver is initialized.
+ MEMORY
+ {
--- a/arch/cris/arch-v10/boot/compressed/head.S
+++ b/arch/cris/arch-v10/boot/compressed/head.S
@@ -10,13 +10,14 @@
beq dram_init_finished
nop
-@@ -36,91 +37,91 @@
+@@ -36,91 +37,91 @@ dram_init_finished:
;; Initiate the PA and PB ports
+cmd_line_addr:
.dword 0
#include "../../lib/hw_settings.S"
---- a/arch/cris/arch-v10/boot/compressed/decompress.ld
-+++ b/arch/cris/arch-v10/boot/compressed/decompress.ld
-@@ -1,4 +1,4 @@
--OUTPUT_FORMAT(elf32-us-cris)
-+OUTPUT_FORMAT(elf32-cris)
+--- a/arch/cris/arch-v10/boot/compressed/misc.c
++++ b/arch/cris/arch-v10/boot/compressed/misc.c
+@@ -5,7 +5,7 @@
+ * adapted for Linux.
+ *
+ * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
+- * puts by Nick Holloway 1993, better puts by Martin Mares 1995
++ * putstr by Nick Holloway 1993, better putstr by Martin Mares 1995
+ * adaptation for Linux/CRIS Axis Communications AB, 1999
+ *
+ */
+@@ -99,12 +99,12 @@ static void error(char *m);
+ static void gzip_mark(void **);
+ static void gzip_release(void **);
+
+-static void puts(const char *);
++static void putstr(const char *);
- MEMORY
- {
+ /* the "heap" is put directly after the BSS ends, at end */
+
+-extern int end;
+-static long free_mem_ptr = (long)&end;
++extern int _end;
++static long free_mem_ptr = (long)&_end;
+
+ #include "../../../../../lib/inflate.c"
+
+@@ -139,7 +139,7 @@ static void gzip_release(void **ptr)
+ /* decompressor info and error messages to serial console */
+
+ static void
+-puts(const char *s)
++putstr(const char *s)
+ {
+ #ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
+ while(*s) {
+@@ -209,9 +209,9 @@ flush_window()
+ static void
+ error(char *x)
+ {
+- puts("\n\n");
+- puts(x);
+- puts("\n\n -- System halted\n");
++ putstr("\n\n");
++ putstr(x);
++ putstr("\n\n -- System halted\n");
+
+ while(1); /* Halt */
+ }
+@@ -257,14 +257,7 @@ decompress_kernel()
+
+ makecrc();
+
+- __asm__ volatile ("move vr,%0" : "=rm" (revision));
+- if (revision < 10)
+- {
+- puts("You need an ETRAX 100LX to run linux 2.6\n");
+- while(1);
+- }
+-
+- puts("Uncompressing Linux...\n");
++ putstr("Uncompressing Linux...\n");
+ gunzip();
+- puts("Done. Now booting the kernel.\n");
++ putstr("Done. Now booting the kernel.\n");
+ }
+--- a/arch/cris/arch-v10/mm/init.c
++++ b/arch/cris/arch-v10/mm/init.c
+@@ -184,6 +184,9 @@ paging_init(void)
+
+ free_area_init_node(0, &contig_page_data, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
+ }
++void free_initrd_mem(unsigned long start, unsigned long end)
++{
++}
+
+ /* Initialize remaps of some I/O-ports. It is important that this
+ * is called before any driver is initialized.
projects / openwrt.git / blobdiff