define KernelPackage/ata-core
SUBMENU:=$(BLOCK_MENU)
TITLE:=Serial and Parallel ATA support
- DEPENDS:=@PCI_SUPPORT +kmod-scsi-core @(!TARGET_ubicom32||!TARGET_etrax||!TARGET_x86)
+ DEPENDS:=@PCI_SUPPORT +kmod-scsi-core @(!TARGET_ubicom32||!TARGET_etrax)
KCONFIG:=CONFIG_ATA
FILES:=$(LINUX_DIR)/drivers/ata/libata.ko
AUTOLOAD:=$(call AutoLoad,21,libata,1)
define AddDepends/ata
SUBMENU:=$(BLOCK_MENU)
- DEPENDS+=!TARGET_x86:kmod-ata-core $(1)
+ DEPENDS+=kmod-ata-core $(1)
endef
TITLE:=AHCI Serial ATA support
KCONFIG:=CONFIG_SATA_AHCI
FILES:=$(LINUX_DIR)/drivers/ata/ahci.ko
- AUTOLOAD:=$(call AutoLoad,41,ahci,1)
+ ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.35)),1)
+ FILES += $(LINUX_DIR)/drivers/ata/libahci.ko
+ AUTOLOAD:=$(call AutoLoad,41,libahci ahci,1)
+ else
+ AUTOLOAD:=$(call AutoLoad,41,ahci,1)
+ endif
$(call AddDepends/ata)
endef
$(eval $(call KernelPackage,ata-artop))
+define KernelPackage/ata-marvell-sata
+ TITLE:=Marvell Serial ATA support
+ KCONFIG:=CONFIG_SATA_MV
+ FILES:=$(LINUX_DIR)/drivers/ata/sata_mv.ko
+ AUTOLOAD:=$(call AutoLoad,41,sata_mv,1)
+ $(call AddDepends/ata)
+endef
+
+define KernelPackage/ata-marvell-sata/description
+ SATA support for marvell chipsets
+endef
+
+$(eval $(call KernelPackage,ata-marvell-sata))
+
+
define KernelPackage/ata-nvidia-sata
TITLE:=Nvidia Serial ATA support
KCONFIG:=CONFIG_SATA_NV
# to stop the config from asking the question.
# MIRROR is M because I've needed it for pvmove.
KCONFIG:= \
- CONFIG_BLK_DEV_MD=n \
- CONFIG_DM_DEBUG=n \
- CONFIG_DM_CRYPT=n \
- CONFIG_DM_UEVENT=n \
- CONFIG_DM_DELAY=n \
- CONFIG_DM_MULTIPATH=n \
- CONFIG_DM_ZERO=n \
- CONFIG_DM_SNAPSHOT=n \
- CONFIG_DM_LOG_USERSPACE=n \
- CONFIG_MD=y \
- CONFIG_BLK_DEV_DM \
- CONFIG_DM_MIRROR
+ CONFIG_BLK_DEV_MD=n \
+ CONFIG_DM_DEBUG=n \
+ CONFIG_DM_UEVENT=n \
+ CONFIG_DM_DELAY=n \
+ CONFIG_DM_MULTIPATH=n \
+ CONFIG_DM_ZERO=n \
+ CONFIG_DM_SNAPSHOT=n \
+ CONFIG_DM_LOG_USERSPACE=n \
+ CONFIG_MD=y \
+ CONFIG_BLK_DEV_DM \
+ CONFIG_DM_CRYPT \
+ CONFIG_DM_MIRROR
FILES:=$(LINUX_DIR)/drivers/md/dm-*.ko
- AUTOLOAD:=$(call AutoLoad,30,dm-mod dm-log dm-region-hash dm-mirror)
+ AUTOLOAD:=$(call AutoLoad,30,dm-mod dm-log dm-region-hash dm-mirror dm-crypt)
endef
define KernelPackage/dm/description
$(eval $(call KernelPackage,dm))
+define KernelPackage/md-mod
+ SUBMENU:=$(BLOCK_MENU)
+ TITLE:=MD RAID
+ KCONFIG:= \
+ CONFIG_MD=y \
+ CONFIG_BLK_DEV_MD=m \
+ CONFIG_MD_AUTODETECT=y \
+ CONFIG_MD_FAULTY=n
+ FILES:=$(LINUX_DIR)/drivers/md/md-mod.ko
+ AUTOLOAD:=$(call AutoLoad,27,md-mod)
+endef
+
+define KernelPackage/md-mod/description
+ Kernel RAID md module (md-mod.ko).
+ You will need to select at least one RAID level module below.
+endef
+
+$(eval $(call KernelPackage,md-mod))
+
+
+define KernelPackage/md/Depends
+ SUBMENU:=$(BLOCK_MENU)
+ DEPENDS:=kmod-md-mod $(1)
+endef
+
+
+define KernelPackage/md-linear
+$(call KernelPackage/md/Depends,)
+ TITLE:=RAID Linear Module
+ KCONFIG:=CONFIG_MD_LINEAR=m
+ FILES:=$(LINUX_DIR)/drivers/md/linear.ko
+ AUTOLOAD:=$(call AutoLoad,28,linear)
+endef
+
+define KernelPackage/md-linear/description
+ RAID "Linear" or "Append" driver module (linear.ko)
+endef
+
+$(eval $(call KernelPackage,md-linear))
+
+
+define KernelPackage/md-raid0
+$(call KernelPackage/md/Depends,)
+ TITLE:=RAID0 Module
+ KCONFIG:=CONFIG_MD_RAID0=m
+ FILES:=$(LINUX_DIR)/drivers/md/raid0.ko
+ AUTOLOAD:=$(call AutoLoad,28,raid0)
+endef
+
+define KernelPackage/md-raid0/description
+ RAID Level 0 (Striping) driver module (raid0.ko)
+endef
+
+$(eval $(call KernelPackage,md-raid0))
+
+
+define KernelPackage/md-raid1
+$(call KernelPackage/md/Depends,)
+ TITLE:=RAID1 Module
+ KCONFIG:=CONFIG_MD_RAID1=m
+ FILES:=$(LINUX_DIR)/drivers/md/raid1.ko
+ AUTOLOAD:=$(call AutoLoad,28,raid1)
+endef
+
+define KernelPackage/md-raid1/description
+ RAID Level 1 (Mirroring) driver (raid1.ko)
+endef
+
+$(eval $(call KernelPackage,md-raid1))
+
+
+define KernelPackage/md-raid10
+$(call KernelPackage/md/Depends,)
+ TITLE:=RAID10 Module
+ KCONFIG:=CONFIG_MD_RAID10=m
+ FILES:=$(LINUX_DIR)/drivers/md/raid10.ko
+ AUTOLOAD:=$(call AutoLoad,28,raid10)
+endef
+
+define KernelPackage/md-raid10/description
+ RAID Level 10 (Mirroring+Striping) driver module (raid10.ko)
+endef
+
+$(eval $(call KernelPackage,md-raid10))
+
+
+define KernelPackage/md-raid456
+$(call KernelPackage/md/Depends,)
+ TITLE:=RAID Level 456 Driver
+ KCONFIG:= \
+ CONFIG_XOR_BLOCKS=m \
+ CONFIG_ASYNC_CORE=m \
+ CONFIG_ASYNC_MEMCPY=m \
+ CONFIG_ASYNC_XOR=m \
+ CONFIG_ASYNC_PQ=m \
+ CONFIG_ASYNC_RAID6_RECOV=m \
+ CONFIG_ASYNC_RAID6_TEST=n \
+ CONFIG_MD_RAID6_PQ=m \
+ CONFIG_MD_RAID456=m \
+ CONFIG_MULTICORE_RAID456=n
+ FILES:= \
+ $(LINUX_DIR)/crypto/xor.ko \
+ $(LINUX_DIR)/crypto/async_tx/async_tx.ko \
+ $(LINUX_DIR)/crypto/async_tx/async_memcpy.ko \
+ $(LINUX_DIR)/crypto/async_tx/async_xor.ko \
+ $(LINUX_DIR)/crypto/async_tx/async_pq.ko \
+ $(LINUX_DIR)/crypto/async_tx/async_raid6_recov.ko \
+ $(LINUX_DIR)/drivers/md/raid456.ko
+ # Additional files with kernel-dependent locations or presence
+ # For Linux >= 2.6.36
+ ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.36)), 1)
+ FILES+= \
+ $(LINUX_DIR)/lib/raid6/raid6_pq.ko
+ # For Linux < 2.6.36
+ else
+ FILES+= \
+ $(LINUX_DIR)/drivers/md/raid6_pq.ko
+ endif
+ AUTOLOAD:=$(call AutoLoad,28, xor async_tx async_memcpy async_xor raid6_pq async_pq async_raid6_recov raid456)
+endef
+
+define KernelPackage/md-raid456/description
+ RAID Level 4,5,6 kernel module (raid456.ko)
+
+ Includes the following modules required by
+ raid456.ko:
+ xor.ko
+ async_tx.ko
+ async_xor.ko
+ async_memcpy.ko
+ async_pq.ko
+ async_raid5_recov.ko
+ raid6_pq.ko
+endef
+
+$(eval $(call KernelPackage,md-raid456))
+
+
+define KernelPackage/md-multipath
+$(call KernelPackage/md/Depends,)
+ TITLE:=MD Multipath Module
+ KCONFIG:=CONFIG_MD_MULTIPATH=m
+ FILES:=$(LINUX_DIR)/drivers/md/multipath.ko
+ AUTOLOAD:=$(call AutoLoad,29,multipath)
+endef
+
+define KernelPackage/md-multipath/description
+ Multipath driver module (multipath.ko)
+endef
+
+$(eval $(call KernelPackage,md-multipath))
+
+
define KernelPackage/ide-core
SUBMENU:=$(BLOCK_MENU)
TITLE:=IDE (ATA/ATAPI) device support
CONFIG_IDE_GD \
CONFIG_IDE_GD_ATA=y \
CONFIG_IDE_GD_ATAPI=n \
+ CONFIG_IDEPCI_PCIBUS_ORDER=y \
CONFIG_BLK_DEV_IDEDMA_PCI=y \
CONFIG_BLK_DEV_IDEPCI=y
FILES:= \
- $(LINUX_DIR)/drivers/ide/ide-core.ko
+ $(LINUX_DIR)/drivers/ide/ide-core.ko \
+ $(LINUX_DIR)/drivers/ide/ide-gd_mod.ko
AUTOLOAD:= \
- $(call AutoLoad,20,ide-core,1)
-endef
-
-define KernelPackage/ide-core/2.4
- FILES+= \
- $(LINUX_DIR)/drivers/ide/ide-detect.ko \
- $(LINUX_DIR)/drivers/ide/ide-disk.ko
- AUTOLOAD+= \
- $(call AutoLoad,35,ide-detect,1) \
- $(call AutoLoad,40,ide-disk,1)
-endef
-
-define KernelPackage/ide-core/2.6
- FILES+= \
- $(LINUX_DIR)/drivers/ide/ide-gd_mod.ko
- AUTOLOAD+= \
+ $(call AutoLoad,20,ide-core,1) \
$(call AutoLoad,40,ide-gd_mod,1)
endef
Kernel support for IDE, useful for usb mass storage devices (e.g. on WL-HDD)
Includes:
- ide-core
- - ide-detect
- - ide-gd_mod (or ide-disk)
+ - ide-gd_mod
endef
$(eval $(call KernelPackage,ide-core))
DEPENDS:=@PCI_SUPPORT
TITLE:=Kernel support for generic PCI IDE chipsets
KCONFIG:=CONFIG_BLK_DEV_GENERIC
+ FILES:=$(LINUX_DIR)/drivers/ide/ide-pci-generic.ko
+ AUTOLOAD:=$(call AutoLoad,30,ide-pci-generic,1)
$(call AddDepends/ide)
endef
-define KernelPackage/ide-generic/2.4
- FILES+= \
- $(LINUX_DIR)/drivers/ide/pci/generic.ko
- AUTOLOAD+= \
- $(call AutoLoad,30,generic,1)
-endef
-
-define KernelPackage/ide-generic/2.6
- FILES+= \
- $(LINUX_DIR)/drivers/ide/ide-pci-generic.ko
- AUTOLOAD+= \
- $(call AutoLoad,30,ide-pci-generic,1)
-endef
-
$(eval $(call KernelPackage,ide-generic))
$(call AddDepends/ide)
endef
-define KernelPackage/ide-aec62xx/2.4
- FILES:=$(LINUX_DIR)/drivers/ide/pci/aec62xx.ko
-endef
-
define KernelPackage/ide-aec62xx/description
Support for Acard AEC62xx (Artop ATP8xx) IDE controllers.
endef
$(call AddDepends/ide)
endef
-define KernelPackage/ide-pdc202xx/2.4
- FILES:=$(LINUX_DIR)/drivers/ide/pci/pdc202xx_old.ko
-endef
-
define KernelPackage/ide-pdc202xx/description
Support for the Promise Ultra 33/66/100 (PDC202{46|62|65|67|68}) IDE
controllers.
$(eval $(call KernelPackage,ide-it821x))
+define KernelPackage/cs5535
+ TITLE:=NSC/AMD CS5535 chipset support
+ DEPENDS:=@TARGET_x86
+ KCONFIG:=CONFIG_BLK_DEV_CS5535
+ FILES=$(LINUX_DIR)/drivers/ide/cs5535.ko
+ AUTOLOAD:=$(call AutoLoad,30,cs5535,1)
+ $(call AddDepends/ide)
+endef
+
+define KernelPackage/cs5535/description
+ Kernel module for the NSC/AMD CS5535 companion chip
+endef
+
+$(eval $(call KernelPackage,cs5535))
+
+
+define KernelPackage/cs5536
+ TITLE:=AMD CS5536 chipset support
+ DEPENDS:=@TARGET_x86
+ KCONFIG:=CONFIG_BLK_DEV_CS5536
+ FILES=$(LINUX_DIR)/drivers/ide/cs5536.ko
+ AUTOLOAD:=$(call AutoLoad,30,cs5536,1)
+ $(call AddDepends/ide)
+endef
+
+define KernelPackage/cs5536/description
+ Kernel module for the AMD CS5536 Geode LX companion chip
+endef
+
+$(eval $(call KernelPackage,cs5536))
+
+
+define KernelPackage/pata-cs5535
+ TITLE:=CS5535 PATA support
+ DEPENDS:=@TARGET_x86 @PCI_SUPPORT
+ KCONFIG:=CONFIG_PATA_CS5535
+ FILES=$(LINUX_DIR)/drivers/ata/pata_cs5535.ko
+ AUTOLOAD:=$(call AutoLoad,30,pata_cs5535,1)
+ $(call AddDepends/ata)
+endef
+
+define KernelPackage/pata-cs5535/description
+ Kernel module for the NSC/AMD CS5535 companion chip
+endef
+
+$(eval $(call KernelPackage,pata-cs5535))
+
+
+define KernelPackage/pata-cs5536
+ TITLE:=CS5536 PATA support
+ DEPENDS:=@TARGET_x86 @PCI_SUPPORT
+ KCONFIG:=CONFIG_PATA_CS5536
+ FILES=$(LINUX_DIR)/drivers/ata/pata_cs5536.ko
+ AUTOLOAD:=$(call AutoLoad,30,pata_cs5536,1)
+ $(call AddDepends/ata)
+endef
+
+define KernelPackage/pata-cs5536/description
+ Kernel module for the AMD CS5536 Geode LX companion chip
+endef
+
+$(eval $(call KernelPackage,pata-cs5536))
+
+
define KernelPackage/libsas
SUBMENU:=$(BLOCK_MENU)
TITLE:=SAS Domain Transport Attributes
TITLE:=Marvell 88SE6440 SAS/SATA driver
DEPENDS:=@TARGET_x86 +kmod-libsas
KCONFIG:=CONFIG_SCSI_MVSAS
- ifneq ($(CONFIG_LINUX_2_6_25)$(CONFIG_LINUX_2_6_30),)
+ ifneq ($(CONFIG_LINUX_2_6_30),)
FILES:=$(LINUX_DIR)/drivers/scsi/mvsas.ko
else
FILES:=$(LINUX_DIR)/drivers/scsi/mvsas/mvsas.ko
define KernelPackage/scsi-core
SUBMENU:=$(BLOCK_MENU)
TITLE:=SCSI device support
- DEPENDS:=@!TARGET_x86
KCONFIG:= \
CONFIG_SCSI \
CONFIG_BLK_DEV_SD
define KernelPackage/scsi-generic
SUBMENU:=$(BLOCK_MENU)
TITLE:=Kernel support for SCSI generic
+ DEPENDS:=+kmod-scsi-core
KCONFIG:= \
CONFIG_CHR_DEV_SG
FILES:= \
endef
$(eval $(call KernelPackage,scsi-generic))
+
+
+define KernelPackage/scsi-cdrom
+ SUBMENU:=$(BLOCK_MENU)
+ TITLE:=Kernel support for CD / DVD drives
+ DEPENDS:=+kmod-scsi-core
+ KCONFIG:= \
+ CONFIG_BLK_DEV_SR \
+ CONFIG_BLK_DEV_SR_VENDOR=n
+ FILES:= \
+ $(LINUX_DIR)/drivers/cdrom/cdrom.ko \
+ $(LINUX_DIR)/drivers/scsi/sr_mod.ko
+ AUTOLOAD:=$(call AutoLoad,30,cdrom) $(call AutoLoad,45,sr_mod)
+endef
+
+$(eval $(call KernelPackage,scsi-cdrom))
+
projects / openwrt.git / blobdiff