[adm5120] use mips_machine code

[openwrt.git] / target / linux / adm5120 / files / include / asm-mips / mach-adm5120 / adm5120_switch.h

diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h
index c3af94b..91adc5b 100644 (file)
--- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h
+++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h
@@ -1,40 +1,29 @@
 /*
- *  $Id$
- *
  *  ADM5120 ethernet switch definitions
  *
  *  This header file defines the hardware registers of the ADM5120 SoC
  *  built-in Ethernet switch.
  *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version 2
- *  of the License, or (at your option) any later version.
+ *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
  *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
  *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the
- *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
- *  Boston, MA  02110-1301, USA.
  */
 
-#ifndef _ADM5120_SWITCH_H_
-#define _ADM5120_SWITCH_H_
+#ifndef _MACH_ADM5120_SWITCH_H
+#define _MACH_ADM5120_SWITCH_H
 
-#define BIT(at)                (1 << (at))
-#define BITMASK(len)   ((1 << (len))-1)
+#ifndef BIT
+#  define BIT(at)      (1 << (at))
+#endif
+#define BITMASK(len)   (BIT(len)-1)
 
 #define SW_READ_REG(r)         __raw_readl( \
-       (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + SWITCH_REG_ ## r)
+       (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + r)
 #define SW_WRITE_REG(r, v)     __raw_writel((v), \
-       (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + SWITCH_REG_ ## r)
+       (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + r)
 
 /* Switch register offsets */
 #define SWITCH_REG_CODE                0x0000
@@ -141,6 +130,9 @@
 #define CPUP_CONF_DCPUP                BIT(0)  /* Disable CPU port */
 #define CPUP_CONF_CRCP         BIT(1)  /* CRC padding from CPU */
 #define CPUP_CONF_BTM          BIT(2)  /* Bridge Testing Mode */
+#define CPUP_CONF_DUNP_SHIFT   9       /* Disable Unknown Packets for portX */
+#define CPUP_CONF_DMCP_SHIFT   16      /* Disable Mcast Packets form portX */
+#define CPUP_CONF_DBCP_SHIFT   24      /* Disable Bcast Packets form portX */
 
 /* PORT_CONF0 register bits */
 #define PORT_CONF0_DP_SHIFT    0       /* Disable Port */
@@ -156,6 +148,26 @@
 #define SEND_TRIG_STL          BIT(0)  /* Send Trigger Low */
 #define SEND_TRIG_STH          BIT(1)  /* Send Trigger High */
 
+/* MAC_WT0 register bits */
+#define MAC_WT0_MAWC           BIT(0)  /* MAC address write command */
+#define MAC_WT0_MWD_SHIFT      1
+#define MAC_WT0_MWD            BIT(1)  /* MAC write done */
+#define MAC_WT0_WFB            BIT(2)  /* Write Filter Bit */
+#define MAC_WT0_WVN_SHIFT      3       /* Write Vlan Number shift */
+#define MAC_WT0_WVE            BIT(6)  /* Write VLAN enable */
+#define MAC_WT0_WPMN_SHIFT     7
+#define MAC_WT0_WAF_SHIFT      13      /* Write Age Field shift */
+#define MAC_WT0_WAF_EMPTY      0
+#define MAC_WT0_WAF_STATIC     7       /* age: static */
+#define MAC_WT0_MAC0_SHIFT     16
+#define MAC_WT0_MAC1_SHIFT     24
+
+/* MAC_WT1 register bits */
+#define MAC_WT1_MAC2_SHIFT     0
+#define MAC_WT1_MAC3_SHIFT     8
+#define MAC_WT1_MAC4_SHIFT     16
+#define MAC_WT1_MAC5_SHIFT     24
+
 /* BW_CNTL0/BW_CNTL1 register bits */
 #define BW_CNTL_DISABLE                0x00
 #define BW_CNTL_64K            0x01
@@ -198,6 +210,9 @@
 /* PHY_CNTL2_RMAE is bad in datasheet */
 #define PHY_CNTL2_RMAE         BIT(31) /* Recommended MCC Average enable */
 
+/* PHY_CNTL3 register bits */
+#define PHY_CNTL3_RNT          BIT(10) /* Recommend Normal Threshold */
+
 /* PORT_TH register bits */
 #define PORT_TH_PPT_MASK       BITMASK(8)      /* Per Port Threshold */
 #define PORT_TH_CPUT_SHIFT     8               /* CPU Port Buffer Threshold */
@@ -221,6 +236,11 @@
 #define GPIO_CONF0_OE_MASK     (0xFF << GPIO_CONF0_OE_SHIFT)
 #define GPIO_CONF0_OV_MASK     (0xFF << GPIO_CONF0_OV_SHIFT)
 
+/* GPIO_CONF2 register bits */
+#define GPIO_CONF2_CSX0                BIT(4)  /* enable CSX0:INTX0 on GPIO 1:2 */
+#define GPIO_CONF2_CSX1                BIT(5)  /* enable CSX1:INTX1 on GPIO 3:4 */
+#define GPIO_CONF2_EW          BIT(6)  /* enable wait state pin for CSX0/1 */
+
 /* INT_STATUS/INT_MASK register bits */
 #define SWITCH_INT_SHD         BIT(0)  /* Send High Done */
 #define SWITCH_INT_SLD         BIT(1)  /* Send Low Done */
@@ -277,4 +297,4 @@
 #define LED1_IV_SHIFT          13      /* LED1 input value shift */
 #define LED2_IV_SHIFT          14      /* LED2 input value shift */
 
-#endif /* _ADM5120_SWITCH_H_ */
+#endif /* _MACH_ADM5120_SWITCH_H */