Fix build on non-SMP machines of the remote GDB debugging (#2666)

[openwrt.git] / package / madwifi / Makefile

diff --git a/package/madwifi/Makefile b/package/madwifi/Makefile
index c832f57..952da7e 100644 (file)
--- a/package/madwifi/Makefile
+++ b/package/madwifi/Makefile
@@ -10,19 +10,18 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=madwifi
-PKG_VERSION:=r2362-20070522
+PKG_VERSION:=r2834-20071106
 PKG_BRANCH:=madwifi-ng
 PKG_RELEASE:=1
 
 PKG_SOURCE:=$(PKG_BRANCH)-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=http://snapshots.madwifi.org/$(PKG_BRANCH)
-PKG_MD5SUM:=7a7783ecf6596089afc4aeebdffb397b
+PKG_MD5SUM:=3de6b07146001b53bc45de5d3dd95bc2
+
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_BRANCH)-$(PKG_VERSION)
 
 include $(INCLUDE_DIR)/package.mk
 
-RATE_CONTROL:=minstrel
-
 ifeq ($(ARCH),mips)
   HAL_TARGET:=mips-be-elf
 endif
@@ -32,6 +31,9 @@ endif
 ifeq ($(ARCH),i386)
   HAL_TARGET:=i386-elf
 endif
+ifeq ($(ARCH),i686)
+  HAL_TARGET:=i386-elf
+endif
 ifeq ($(ARCH),armeb)
   HAL_TARGET:=xscale-be-elf
 endif
@@ -42,23 +44,34 @@ ifeq ($(ARCH),powerpc)
   HAL_TARGET:=powerpc-be-elf
 endif
 
-BUS:=PCI
-ifneq ($(CONFIG_LINUX_2_6_ATHEROS),)
+ifneq ($(CONFIG_TARGET_atheros),)
   BUS:=AHB
   HAL_TARGET:=ap51
-endif
-ifneq ($(CONFIG_LINUX_2_6_ARUBA),)
-  BUS:=PCI AHB # no suitable HAL for AHB yet.
+else
+  ifneq ($(CONFIG_PCI_SUPPORT),)
+    BUS:=PCI
+  endif
 endif
 
-BUS_MODULES:=
-ifeq ($(findstring AHB,$(BUS)),AHB)
-  BUS_MODULES+=$(PKG_BUILD_DIR)/ath/ath_ahb.$(LINUX_KMOD_SUFFIX)
-endif
-ifeq ($(findstring PCI,$(BUS)),PCI)
-  BUS_MODULES+=$(PKG_BUILD_DIR)/ath/ath_pci.$(LINUX_KMOD_SUFFIX)
+# XXX: remove this check later when we have PCI support properly detected on all targets
+ifneq ($(CONFIG_TARGET_uml),)
+ BUS:=
 endif
 
+RATE_CONTROL:=minstrel
+
+MADWIFI_FILES:= \
+       $(PKG_BUILD_DIR)/net80211/wlan.$(LINUX_KMOD_SUFFIX) \
+       $(PKG_BUILD_DIR)/net80211/wlan_scan_ap.$(LINUX_KMOD_SUFFIX) \
+       $(PKG_BUILD_DIR)/net80211/wlan_scan_sta.$(LINUX_KMOD_SUFFIX) \
+       $(PKG_BUILD_DIR)/ath_hal/ath_hal.$(LINUX_KMOD_SUFFIX) \
+       $(PKG_BUILD_DIR)/ath_rate/$(RATE_CONTROL)/ath_rate_$(RATE_CONTROL).$(LINUX_KMOD_SUFFIX) \
+       $(PKG_BUILD_DIR)/net80211/wlan_acl.$(LINUX_KMOD_SUFFIX) \
+       $(PKG_BUILD_DIR)/net80211/wlan_ccmp.$(LINUX_KMOD_SUFFIX) \
+       $(PKG_BUILD_DIR)/net80211/wlan_tkip.$(LINUX_KMOD_SUFFIX) \
+       $(PKG_BUILD_DIR)/net80211/wlan_wep.$(LINUX_KMOD_SUFFIX) \
+       $(PKG_BUILD_DIR)/net80211/wlan_xauth.$(LINUX_KMOD_SUFFIX) \
+
 MADWIFI_AUTOLOAD:= \
        wlan \
        wlan_scan_ap \
@@ -69,53 +82,57 @@ MADWIFI_AUTOLOAD:= \
        wlan_ccmp \
        wlan_tkip \
        wlan_wep \
-       wlan_xauth
+       wlan_xauth \
 
 ifeq ($(findstring AHB,$(BUS)),AHB)
-       MADWIFI_AUTOLOAD += ath_ahb
+       MADWIFI_FILES+= $(PKG_BUILD_DIR)/ath/ath_ahb.$(LINUX_KMOD_SUFFIX)
+       MADWIFI_AUTOLOAD+= ath_ahb
 endif
 ifeq ($(findstring PCI,$(BUS)),PCI)
-       MADWIFI_AUTOLOAD += ath_pci
+       MADWIFI_FILES+= $(PKG_BUILD_DIR)/ath/ath_pci.$(LINUX_KMOD_SUFFIX)
+       MADWIFI_AUTOLOAD+= ath_pci
 endif
 
 define KernelPackage/madwifi
   SUBMENU:=Wireless Drivers
   TITLE:=Driver for Atheros wireless chipsets
-  DEPENDS:=+wireless-tools
-  DESCRIPTION:=\
-       This package contains a driver for Atheros 802.11a/b/g chipsets.
   URL:=http://madwifi.org/
-  VERSION:=$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE)
-  FILES:= \
-               $(PKG_BUILD_DIR)/ath_hal/ath_hal.$(LINUX_KMOD_SUFFIX) \
-               $(BUS_MODULES) \
-               $(PKG_BUILD_DIR)/ath_rate/$(RATE_CONTROL)/ath_rate_$(RATE_CONTROL).$(LINUX_KMOD_SUFFIX) \
-               $(PKG_BUILD_DIR)/net80211/wlan*.$(LINUX_KMOD_SUFFIX)
+  DEPENDS:=+wireless-tools @PCI_SUPPORT||TARGET_atheros @!TARGET_avr32 @!TARGET_etrax @!TARGET_uml
+  FILES:=$(MADWIFI_FILES)
   AUTOLOAD:=$(call AutoLoad,50,$(MADWIFI_AUTOLOAD))
 endef
 
-MADWIFI_MAKEOPTS= -C $(PKG_BUILD_DIR) \
-               PATH="$(TARGET_PATH)" \
-               ARCH="$(LINUX_KARCH)" \
-               CROSS_COMPILE="$(TARGET_CROSS)" \
-               TARGET="$(HAL_TARGET)" \
-               TOOLPREFIX="$(KERNEL_CROSS)" \
-               TOOLPATH="$(KERNEL_CROSS)" \
-               KERNELPATH="$(LINUX_DIR)" \
-               LDOPTS="--no-warn-mismatch " \
-               ATH_RATE="ath_rate/$(RATE_CONTROL)" \
-               WARNINGS="" \
-               DOMULTI=1
+define KernelPackage/madwifi/description
+ This package contains a driver for Atheros 802.11a/b/g chipsets.
+endef
+
+MAKE_ARGS:= \
+       PATH="$(TARGET_PATH)" \
+       ARCH="$(LINUX_KARCH)" \
+       CROSS_COMPILE="$(TARGET_CROSS)" \
+       TARGET="$(HAL_TARGET)" \
+       TOOLPREFIX="$(KERNEL_CROSS)" \
+       TOOLPATH="$(KERNEL_CROSS)" \
+       KERNELPATH="$(LINUX_DIR)" \
+       LDOPTS="--no-warn-mismatch " \
+       ATH_RATE="ath_rate/$(RATE_CONTROL)" \
+       WARNINGS="" \
+       DOMULTI=1
+
+MAKE_VARS:= \
+       COPTS="-DCONFIG_ATHEROS_RATE_DEFAULT='\"$(RATE_CONTROL)\"'" \
 
 ifeq ($(findstring AHB,$(BUS)),AHB)
   define Build/Compile/ahb
-       COPTS="-DCONFIG_ATHEROS_RATE_DEFAULT='\"$(RATE_CONTROL)\"'" $(MAKE) $(MADWIFI_MAKEOPTS) BUS="AHB" modules
+       $(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) BUS="AHB" modules
+       $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) CFLAGS="$(TARGET_CFLAGS)" tools
   endef
 endif
 
 ifeq ($(findstring PCI,$(BUS)),PCI)
   define Build/Compile/pci
-       COPTS="-DCONFIG_ATHEROS_RATE_DEFAULT='\"$(RATE_CONTROL)\"'" $(MAKE) $(MADWIFI_MAKEOPTS) BUS="PCI" modules
+       $(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) BUS="PCI" modules
+       $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) CFLAGS="$(TARGET_CFLAGS)" tools
   endef
 endif
 
@@ -126,20 +143,17 @@ endef
 define Build/Compile
        $(call Build/Compile/ahb)
        $(call Build/Compile/pci)
-       $(MAKE) $(MADWIFI_MAKEOPTS) \
-               CFLAGS="$(TARGET_CFLAGS)" \
-               tools
 endef
 
 define Build/InstallDev
-       mkdir -p $(STAGING_DIR)/usr/include/madwifi
-       $(CP) $(PKG_BUILD_DIR)/include $(STAGING_DIR)/usr/include/madwifi/
-       mkdir -p $(STAGING_DIR)/usr/include/madwifi/net80211
-       $(CP) $(PKG_BUILD_DIR)/net80211/*.h $(STAGING_DIR)/usr/include/madwifi/net80211/
+       mkdir -p $(1)/usr/include/madwifi
+       $(CP) $(PKG_BUILD_DIR)/include $(1)/usr/include/madwifi/
+       mkdir -p $(1)/usr/include/madwifi/net80211
+       $(CP) $(PKG_BUILD_DIR)/net80211/*.h $(1)/usr/include/madwifi/net80211/
 endef
 
 define Build/UninstallDev
-       rm -rf  $(STAGING_DIR)/usr/include/madwifi
+       rm -rf $(1)/usr/include/madwifi
 endef
 
 define KernelPackage/madwifi/install