scan_broadcom() {
local device="$1"
local wds
- local adhoc sta apmode
- local adhoc_if sta_if ap_if
+ local adhoc sta apmode mon
+ local adhoc_if sta_if ap_if mon_if
+ local _c=0
config_get vifs "$device" vifs
for vif in $vifs; do
config_get mode "$vif" mode
+ _c=$(($_c + 1))
case "$mode" in
adhoc)
adhoc=1
;;
wds)
config_get addr "$vif" bssid
- [ -z "$addr" ] || append wds "$addr"
+ [ -z "$addr" ] || {
+ addr=$(echo "$addr" | tr 'A-F' 'a-f')
+ append wds "$addr"
+ }
+ ;;
+ monitor)
+ mon=1
+ mon_if="$vif"
;;
*) echo "$device($vif): Invalid mode";;
esac
config_set "$device" wds "$wds"
local _c=
- for vif in ${adhoc_if:-$sta_if $ap_if}; do
+ for vif in ${adhoc_if:-$sta_if $ap_if $mon_if}; do
config_set "$vif" ifname "wl0${_c:+.$_c}"
_c=$((${_c:-0} + 1))
done
- config_set "$device" vifs "${adhoc_if:-$sta_if $ap_if}"
+ config_set "$device" vifs "${adhoc_if:-$sta_if $ap_if $mon_if}"
ifdown="down"
for vif in 0 1 2 3; do
ap=1
infra=1
- mssid=1
+ if [ "$_c" -gt 1 ]; then
+ mssid=1
+ else
+ mssid=
+ fi
apsta=0
radio=1
- case "$adhoc:$sta:$apmode" in
+ monitor=0
+ passive=0
+ case "$adhoc:$sta:$apmode:$mon" in
1*)
ap=0
- mssid=0
+ mssid=
infra=0
;;
- :1:1)
+ :1:1:)
apsta=1
wet=1
;;
- :1:)
+ :1::)
+ wet=1
+ ap=0
+ mssid=
+ ;;
+ :::1)
wet=1
ap=0
- mssid=0
+ mssid=
+ monitor=1
+ passive=1
;;
::)
radio=0
}
disable_broadcom() {
+ set_wifi_down "$1"
wlc down
(
include /lib/network
config_get vifs "$device" vifs
config_get distance "$device" distance
config_get slottime "$device" slottime
+ config_get rxant "$device" rxant
+ config_get txant "$device" txant
+ config_get_bool frameburst "$device" frameburst
+ config_get macfilter "$device" macfilter
+ config_get maclist "$device" maclist
+ config_get macaddr "$device" macaddr
local vif_pre_up vif_post_up vif_do_up
_c=0
} || {
slottime="${slottime:--1}"
}
+
+ case "$macfilter" in
+ allow|2)
+ macfilter=2;
+ ;;
+ deny|1)
+ macfilter=1;
+ ;;
+ disable|none|0)
+ macfilter=0;
+ ;;
+ esac
for vif in $vifs; do
config_get mode "$vif" mode
append vif_pre_up "vif $_c" "$N"
append vif_post_up "vif $_c" "$N"
+ append vif_do_up "vif $_c" "$N"
[ "$mode" = "sta" ] || {
- config_get_bool hidden "$vif" hidden 1
+ config_get_bool hidden "$vif" hidden 0
append vif_pre_up "closed $hidden" "$N"
- config_get_bool isolate "$vif" isolate
+ config_get_bool isolate "$vif" isolate 0
append vif_pre_up "ap_isolate $isolate" "$N"
}
config_get k "$vif" key$knr
[ -n "$k" ] || continue
[ "$defkey" = "$knr" ] && def="=" || def=""
- append vif_pre_up "wepkey $def$knr,$k" "$N"
+ append vif_do_up "wepkey $def$knr,$k" "$N"
done
;;
"");;
- *) append vif_pre_up "wepkey =1,$key" "$N";;
+ *) append vif_do_up "wepkey =1,$key" "$N";;
esac
;;
*psk*|*PSK*)
wsec_r=1
config_get key "$vif" key
case "$enc" in
- wpa2*|WPA2*|PSK2*|psk2*) auth=128; wsec=4;;
+ wpa*+wpa2*|WPA*+WPA2*|*psk+*psk2|*PSK+*PSK2) auth=132; wsec=6;;
+ wpa2*|WPA2*|*PSK2|*psk2) auth=128; wsec=4;;
*) auth=4; wsec=2;;
esac
eval "${vif}_key=\"\$key\""
config_get server "$vif" server
config_get port "$vif" port
case "$enc" in
+ wpa*+wpa2*|WPA*+WPA2*) auth=66; wsec=6;;
wpa2*|WPA2*) auth=64; wsec=4;;
*) auth=2; wsec=2;;
esac
eval "${vif}_key=\"\$key\""
- nasopts="-r \"\$${vif}_key\" -h $server -p $port"
+ nasopts="-r \"\$${vif}_key\" -h $server -p ${port:-1812}"
;;
esac
- append vif_post_up "wsec $wsec" "$N"
- append vif_post_up "wpa_auth $auth" "$N"
- append vif_post_up "wsec_restrict $wsec_r" "$N"
- append vif_post_up "eap_restrict $eap_r" "$N"
+ append vif_do_up "wsec $wsec" "$N"
+ append vif_do_up "wpa_auth $auth" "$N"
+ append vif_do_up "wsec_restrict $wsec_r" "$N"
+ append vif_do_up "eap_restrict $eap_r" "$N"
config_get ssid "$vif" ssid
- append vif_post_up "vlan_mode 0"
+ append vif_post_up "vlan_mode 0" "$N"
append vif_post_up "ssid $ssid" "$N"
- case "$mode" in
- sta|adhoc) append vif_do_up "ssid $ssid" "$N";;
- esac
+ append vif_do_up "ssid $ssid" "$N"
+
+ [ "$mode" = "monitor" ] && {
+ append vif_post_up "monitor $monitor" "$N"
+ append vif_post_up "passive $passive" "$N"
+ }
append vif_post_up "enabled 1" "$N"
config_get ifname "$vif" ifname
- append if_up "ifconfig $ifname up" ";$N"
+ #append if_up "ifconfig $ifname up" ";$N"
+ [ -z "$macaddr" ] || append if_up "ifconfig $ifname hw ether $macaddr" ";$N"
local net_cfg bridge
net_cfg="$(find_net_config "$vif")"
[ -z "$net_cfg" ] || {
bridge="$(bridge_interface "$net_cfg")"
append if_up "start_net '$ifname' '$net_cfg'" ";$N"
+ append if_up "set_wifi_up '$vif' '$ifname'" ";$N"
}
[ -z "$nasopts" ] || {
eval "${vif}_ssid=\"\$ssid\""
- mode="-A"
- [ "$vif" = "$sta_if" ] && mode="-S"
- [ -z "$nas" ] || nas_cmd="${nas_cmd:+$nas_cmd$N}$nas -P /var/run/nas.$ifname.pid -H 34954 ${bridge:+ -l $bridge} -i $ifname $mode -m $auth -w $wsec -s \"\$${vif}_ssid\" -g 3600 $nasopts &"
+ nas_mode="-A"
+ use_nas=1
+ [ "$mode" = "sta" ] && {
+ nas_mode="-S"
+ [ -z "$bridge" ] || {
+ append vif_post_up "supplicant 1" "$N"
+ append vif_post_up "passphrase $key" "$N"
+
+ use_nas=0
+ }
+ }
+ [ -z "$nas" -o "$use_nas" = "0" ] || nas_cmd="${nas_cmd:+$nas_cmd$N}$nas -P /var/run/nas.$ifname.pid -H 34954 ${bridge:+ -l $bridge} -i $ifname $nas_mode -m $auth -w $wsec -s \"\$${vif}_ssid\" -g 3600 $nasopts &"
}
_c=$(($_c + 1))
done
$ifdown
ap $ap
-mssid $mssid
+${mssid:+mssid $mssid}
apsta $apsta
infra $infra
${wet:+wet 1}
+802.11d 0
+802.11h 0
+rxant ${rxant:-3}
+txant ${txant:-3}
+monitor ${monitor:-0}
+passive ${passive:-0}
radio ${radio:-1}
-macfilter 0
-maclist none
-wds ${wds:-none}
-${channel:-channel $channel}
+macfilter ${macfilter:-0}
+maclist ${maclist:-none}
+wds none
+${wds:+wds $wds}
country ${country:-IL0}
+${channel:+channel $channel}
maxassoc ${maxassoc:-128}
slottime ${slottime:--1}
+${frameburst:+frameburst $frameburst}
$vif_pre_up
up
option type broadcom
option channel 5
+ # REMOVE THIS LINE TO ENABLE WIFI:
+ option disabled 1
+
config wifi-iface
option device wl0
+ option network lan
option mode ap
option ssid OpenWrt
- option hidden 0
option encryption none
-
EOF
}
projects / openwrt.git / blobdiff