/*
* Ralink RT305x SoC specific setup
*
- * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* Parts of this file are based on Ralink's 2.6.21 BSP
#include <linux/init.h>
#include <linux/module.h>
+#include <asm/mach-ralink/common.h>
+#include <asm/mach-ralink/ramips_gpio.h>
#include <asm/mach-ralink/rt305x.h>
#include <asm/mach-ralink/rt305x_regs.h>
-unsigned char rt305x_sys_type[RT305X_SYS_TYPE_LEN];
-
-unsigned long rt305x_cpu_freq;
-EXPORT_SYMBOL_GPL(rt305x_cpu_freq);
-
-unsigned long rt305x_sys_freq;
-EXPORT_SYMBOL_GPL(rt305x_sys_freq);
-
-void __iomem * rt305x_intc_base;
void __iomem * rt305x_sysc_base;
void __iomem * rt305x_memc_base;
n1 = rt305x_sysc_rr(SYSC_REG_CHIP_NAME1);
id = rt305x_sysc_rr(SYSC_REG_CHIP_ID);
- snprintf(rt305x_sys_type, RT305X_SYS_TYPE_LEN,
+ snprintf(ramips_sys_type, RAMIPS_SYS_TYPE_LEN,
"Ralink %c%c%c%c%c%c%c%c id:%u rev:%u",
(char) (n0 & 0xff), (char) ((n0 >> 8) & 0xff),
(char) ((n0 >> 16) & 0xff), (char) ((n0 >> 24) & 0xff),
(id & CHIP_ID_REV_MASK));
}
-void __init rt305x_detect_sys_freq(void)
+static struct ramips_gpio_chip rt305x_gpio_chips[] = {
+ {
+ .chip = {
+ .label = "RT305X-GPIO0",
+ .base = 0,
+ .ngpio = 24,
+ },
+ .regs = {
+ [RAMIPS_GPIO_REG_INT] = 0x00,
+ [RAMIPS_GPIO_REG_EDGE] = 0x04,
+ [RAMIPS_GPIO_REG_RENA] = 0x08,
+ [RAMIPS_GPIO_REG_FENA] = 0x0c,
+ [RAMIPS_GPIO_REG_DATA] = 0x20,
+ [RAMIPS_GPIO_REG_DIR] = 0x24,
+ [RAMIPS_GPIO_REG_POL] = 0x28,
+ [RAMIPS_GPIO_REG_SET] = 0x2c,
+ [RAMIPS_GPIO_REG_RESET] = 0x30,
+ [RAMIPS_GPIO_REG_TOGGLE] = 0x34,
+ },
+ .map_base = RT305X_PIO_BASE,
+ .map_size = RT305X_PIO_SIZE,
+ },
+ {
+ .chip = {
+ .label = "RT305X-GPIO1",
+ .base = 24,
+ .ngpio = 16,
+ },
+ .regs = {
+ [RAMIPS_GPIO_REG_INT] = 0x38,
+ [RAMIPS_GPIO_REG_EDGE] = 0x3c,
+ [RAMIPS_GPIO_REG_RENA] = 0x40,
+ [RAMIPS_GPIO_REG_FENA] = 0x44,
+ [RAMIPS_GPIO_REG_DATA] = 0x48,
+ [RAMIPS_GPIO_REG_DIR] = 0x4c,
+ [RAMIPS_GPIO_REG_POL] = 0x50,
+ [RAMIPS_GPIO_REG_SET] = 0x54,
+ [RAMIPS_GPIO_REG_RESET] = 0x58,
+ [RAMIPS_GPIO_REG_TOGGLE] = 0x5c,
+ },
+ .map_base = RT305X_PIO_BASE,
+ .map_size = RT305X_PIO_SIZE,
+ },
+ {
+ .chip = {
+ .label = "RT305X-GPIO2",
+ .base = 40,
+ .ngpio = 12,
+ },
+ .regs = {
+ [RAMIPS_GPIO_REG_INT] = 0x60,
+ [RAMIPS_GPIO_REG_EDGE] = 0x64,
+ [RAMIPS_GPIO_REG_RENA] = 0x68,
+ [RAMIPS_GPIO_REG_FENA] = 0x6c,
+ [RAMIPS_GPIO_REG_DATA] = 0x70,
+ [RAMIPS_GPIO_REG_DIR] = 0x74,
+ [RAMIPS_GPIO_REG_POL] = 0x78,
+ [RAMIPS_GPIO_REG_SET] = 0x7c,
+ [RAMIPS_GPIO_REG_RESET] = 0x80,
+ [RAMIPS_GPIO_REG_TOGGLE] = 0x84,
+ },
+ .map_base = RT305X_PIO_BASE,
+ .map_size = RT305X_PIO_SIZE,
+ },
+};
+
+static struct ramips_gpio_data rt305x_gpio_data = {
+ .chips = rt305x_gpio_chips,
+ .num_chips = ARRAY_SIZE(rt305x_gpio_chips),
+};
+
+static void rt305x_gpio_reserve(int first, int last)
+{
+ for (; first <= last; first++)
+ gpio_request(first, "reserved");
+}
+
+void __init rt305x_gpio_init(u32 mode)
{
- u32 t;
+ u32 t;
- t = rt305x_sysc_rr(SYSC_REG_SYSTEM_CONFIG);
- t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK);
+ rt305x_sysc_wr(mode, SYSC_REG_GPIO_MODE);
+ ramips_gpio_init(&rt305x_gpio_data);
+ if ((mode & RT305X_GPIO_MODE_I2C) == 0)
+ rt305x_gpio_reserve(RT305X_GPIO_I2C_SD, RT305X_GPIO_I2C_SCLK);
+
+ if ((mode & RT305X_GPIO_MODE_SPI) == 0)
+ rt305x_gpio_reserve(RT305X_GPIO_SPI_EN, RT305X_GPIO_SPI_CLK);
+
+ t = mode >> RT305X_GPIO_MODE_UART0_SHIFT;
+ t &= RT305X_GPIO_MODE_UART0_MASK;
switch (t) {
- case SYSTEM_CONFIG_CPUCLK_320:
- rt305x_cpu_freq = 320000000;
+ case RT305X_GPIO_MODE_UARTF:
+ case RT305X_GPIO_MODE_PCM_UARTF:
+ case RT305X_GPIO_MODE_PCM_I2S:
+ case RT305X_GPIO_MODE_I2S_UARTF:
+ rt305x_gpio_reserve(RT305X_GPIO_7, RT305X_GPIO_14);
break;
- case SYSTEM_CONFIG_CPUCLK_384:
- rt305x_cpu_freq = 384000000;
+ case RT305X_GPIO_MODE_PCM_GPIO:
+ rt305x_gpio_reserve(RT305X_GPIO_10, RT305X_GPIO_14);
+ break;
+ case RT305X_GPIO_MODE_GPIO_UARTF:
+ case RT305X_GPIO_MODE_GPIO_I2S:
+ rt305x_gpio_reserve(RT305X_GPIO_7, RT305X_GPIO_10);
break;
}
- rt305x_sys_freq = rt305x_cpu_freq / 3;
+ if ((mode & RT305X_GPIO_MODE_UART1) == 0)
+ rt305x_gpio_reserve(RT305X_GPIO_UART1_TXD,
+ RT305X_GPIO_UART1_RXD);
+
+ if ((mode & RT305X_GPIO_MODE_JTAG) == 0)
+ rt305x_gpio_reserve(RT305X_GPIO_JTAG_TDO, RT305X_GPIO_JTAG_TDI);
+
+ if ((mode & RT305X_GPIO_MODE_MDIO) == 0)
+ rt305x_gpio_reserve(RT305X_GPIO_MDIO_MDC,
+ RT305X_GPIO_MDIO_MDIO);
+
+ if ((mode & RT305X_GPIO_MODE_SDRAM) == 0)
+ rt305x_gpio_reserve(RT305X_GPIO_SDRAM_MD16,
+ RT305X_GPIO_SDRAM_MD31);
+
+ if ((mode & RT305X_GPIO_MODE_RGMII) == 0)
+ rt305x_gpio_reserve(RT305X_GPIO_GE0_TXD0,
+ RT305X_GPIO_GE0_RXCLK);
}
projects / openwrt.git / blobdiff