#
-# Copyright (C) 2008 OpenWrt.org
+# Copyright (C) 2008-2011 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
-IMGNAME:=$(BIN_DIR)/openwrt-$(BOARD)
-
define imgname
-$(IMGNAME)-$(2)-$(patsubst jffs2-%,jffs2,$(1))
+$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)
endef
-VMLINUX:=$(IMGNAME)-vmlinux
-UIMAGE:=$(IMGNAME)-uImage
+VMLINUX:=$(IMG_PREFIX)-vmlinux
+UIMAGE:=$(IMG_PREFIX)-uImage
ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
- VMLINUX:=$(IMGNAME)-vmlinux-initramfs
- UIMAGE:=$(IMGNAME)-uImage-initramfs
+ VMLINUX:=$(IMG_PREFIX)-vmlinux-initramfs
+ UIMAGE:=$(IMG_PREFIX)-uImage-initramfs
endif
-ifeq ($(CONFIG_RALINK_RT305X),y)
+ifeq ($(CONFIG_RALINK_RT288X),y)
define kernel_entry
--a 0x80000000 -e 0x80000000
+-a 0x88000000 -e 0x88000000
endef
else
define kernel_entry
--a 0x88000000 -e 0x88000000
+-a 0x80000000 -e 0x80000000
endef
endif
+define CompressLzma
+ $(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(2)
+endef
+
+define PatchKernelLzma
+ cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(1)
+ $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux-$(1) '$(strip $(2))'
+ $(call CompressLzma,$(KDIR)/vmlinux-$(1),$(KDIR)/vmlinux-$(1).bin.lzma)
+endef
+
+define MkImage
+ mkimage -A mips -O linux -T kernel -C $(1) $(call kernel_entry)\
+ -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+ -d $(2) $(3)
+endef
+
define Image/BuildKernel
- cp $(KDIR)/vmlinux.elf $(VMLINUX).elf
- cp $(KDIR)/vmlinux $(VMLINUX).bin
- $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux -lc1 -lp2 -pb2 $(KDIR)/vmlinux.lzma
+ cp $(KDIR)/vmlinux.elf $(BIN_DIR)/$(VMLINUX).elf
+ cp $(KDIR)/vmlinux $(BIN_DIR)/$(VMLINUX).bin
+ $(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma)
+ $(call MkImage,lzma,$(KDIR)/vmlinux.bin.lzma,$(KDIR)/uImage.lzma)
+ cp $(KDIR)/uImage.lzma $(BIN_DIR)/$(UIMAGE).bin
+endef
+
+define BuildFirmware/Generic
+ $(call PatchKernelLzma,$(2),$(3) $($(4)))
+ $(call MkImage,lzma,"$(KDIR)/vmlinux-$(2).bin.lzma","$(KDIR)/vmlinux-$(2).uImage")
+ if [ `stat -c%s "$(KDIR)/vmlinux-$(2).uImage"` -gt $(5) ]; then \
+ echo "Warning: $(KDIR)/vmlinux-$(2).uImage is too big"; \
+ else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(6) ]; then \
+ echo "Warning: $(KDIR)/root.$(1) is too big"; \
+ else \
+ ( \
+ dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(5) conv=sync; \
+ dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
+ ) > $(call imgname,$(1),$(2))-sysupgrade.bin; \
+ fi; fi
+endef
+
+define BuildFirmware/Buffalo
+ $(call PatchKernelLzma,$(2),board=$(3) $($(4)))
+ $(call MkImage,lzma,"$(KDIR)/vmlinux-$(2).bin.lzma","$(KDIR)/vmlinux-$(2).uImage")
+ if [ `stat -c%s "$(KDIR)/vmlinux-$(2).uImage"` -gt $(5) ]; then \
+ echo "Warning: $(KDIR)/vmlinux-$(2).uImage is too big"; \
+ else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(6) ]; then \
+ echo "Warning: $(KDIR)/root.$(1) is too big"; \
+ else \
+ buffalo-enc -p $(3) -v 1.76 \
+ -i $(KDIR)/vmlinux-$(2).uImage \
+ -o $(KDIR)/vmlinux-$(2).uImage.enc; \
+ buffalo-enc -p $(3) -v 1.76 \
+ -i $(KDIR)/root.$(1) \
+ -o $(KDIR)/root.$(2).enc; \
+ buffalo-tag -b $(3) -p $(3) -a ram -v 1.76 -m 1.01 \
+ -l mlang8 -f 1 -r EU \
+ -i $(KDIR)/vmlinux-$(2).uImage.enc \
+ -i $(KDIR)/root.$(2).enc \
+ -o $(call imgname,$(1),$(2))-factory-EU.bin; \
+ fi; fi
+endef
+
+define BuildFirmware/NW718
+ $(call PatchKernelLzma,$(2),$(3) $($(4)))
mkimage -A mips -O linux -T kernel -C lzma $(call kernel_entry) \
- -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
- -d $(KDIR)/vmlinux.lzma $(KDIR)/uImage.lzma
- cp $(KDIR)/uImage.lzma $(UIMAGE).bin
+ -n "ARA1B4NCRNW718;1" \
+ -d "$(KDIR)/vmlinux-$(2).bin.lzma" \
+ "$(KDIR)/vmlinux-$(2).uImage"
+ if [ `stat -c%s "$(KDIR)/vmlinux-$(2).uImage"` -gt $(5) ]; then \
+ echo "Warning: $(KDIR)/vmlinux-$(2).uImage is too big"; \
+ else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(6) ]; then \
+ echo "Warning: $(KDIR)/root.$(1) is too big"; \
+ else \
+ ( \
+ dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(5) conv=sync; \
+ dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
+ ) > $(call imgname,$(1),$(2))-factory.bin; \
+ fi; fi
endef
+define BuildFirmware/Edimax
+ mkedimaximg -i $(call imgname,$(1),$(2))-sysupgrade.bin \
+ -o $(call imgname,$(1),$(2))-factory.bin \
+ -s $(3) -m $(4) -f $(5) -S $(6)
+endef
+
+mtdlayout_4M=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
+define Image/Build/Template/GENERIC_4M
+ $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_4M,851968,3014656)
+endef
+
+mtdlayout_8M=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),7040k(rootfs),7872k@0x50000(firmware)
+define Image/Build/Template/GENERIC_8M
+ $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_8M,851968,7208960)
+endef
+
+mtdlayout_dir300b1=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
+mtd_dir300b1_kernel_part_size=851968
+mtd_dir300b1_rootfs_part_size=3014656
+define Image/Build/Template/DIR300B1
+ $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_dir300b1,$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size))
+ mkwrgimg -s $(4) -d /dev/mtdblock/2 \
+ -i $(call imgname,$(1),$(2))-sysupgrade.bin \
+ -o $(call imgname,$(1),$(2))-factory.bin
+endef
+
+mtdlayout_nw718=mtdparts=spi0.0:192k(u-boot)ro,128k(config)ro,64k(factory)ro,832k(kernel),2880k(rootfs),3712k@0x60000(firmware)
+define Image/Build/Template/NW718
+ $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_nw718,851968,2949120)
+ $(call BuildFirmware/NW718,$(1),$(2),board=$(3),mtdlayout_nw718,851968,2949120)
+endef
+
+define Image/Build/Profile/DIR300B1
+ $(call Image/Build/Template/DIR300B1,$(1),dir-300-b1,DIR-300-B1,wrgn23_dlwbr_dir300b)
+ $(call Image/Build/Template/DIR300B1,$(1),dir-600-b1,DIR-600-B1,wrgn23_dlwbr_dir600b)
+ $(call Image/Build/Template/DIR300B1,$(1),dir-600-b2,DIR-600-B2,wrgn23_dlwbr_dir600b)
+endef
+
+mtdlayout_rtg32b1=mtdparts=spi0.0:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
+mtd_rtg32b1_kernel_part_size=851968
+mtd_rtg32b1_rootfs_part_size=3014656
+define Image/Build/Template/RTG32B1
+ $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_rtg32b1,$(mtd_rtg32b1_kernel_part_size),$(mtd_rtg32b1_rootfs_part_size))
+endef
+
+define Image/Build/Profile/RTG32B1
+ $(call Image/Build/Template/RTG32B1,$(1),rt-g32-b1,RT-G32-B1)
+endef
+
+define Image/Build/Profile/FONERA20N
+ $(call Image/Build/Template/GENERIC_8M,$(1),fonera20n,FONERA20N)
+ $(call BuildFirmware/Edimax,$(1),fonera20n,RSDK,NL1T,0x50000,0xc0000)
+endef
+
+define Image/Build/Profile/BC2
+ $(call Image/Build/Template/GENERIC_8M,$(1),bc2,BC2)
+endef
+
+define Image/Build/Profile/NBG419N
+ $(call Image/Build/Template/GENERIC_4M,$(1),nbg-419n,NBG-419N)
+endef
+
+define Image/Build/Profile/NW718
+ $(call Image/Build/Template/NW718,$(1),nw718,NW718)
+endef
+
+define Image/Build/Profile/PWH2004
+ $(call Image/Build/Template/GENERIC_8M,$(1),pwh2004,PWH2004)
+endef
+
+define Image/Build/Profile/V22RW2X2
+ $(call Image/Build/Template/GENERIC_4M,$(1),v22rw-2x2,V22RW-2X2)
+endef
+
+mtdlayout_whrg300n=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,960k(kernel),2752k(rootfs),64k(user)ro,3712k@0x50000(firmware)
+define Image/Build/Profile/WHRG300N
+ $(call Image/Build/Template/GENERIC_4M,$(1),whr-g300n,WHR-G300N)
+ $(call BuildFirmware/Buffalo,$(1),whr-g300n,WHR-G300N,mtdlayout_whrg300n,983040,3801088)
+ ( \
+ echo -n -e "# Airstation FirmWare\nrun u_fw\nreset\n\n" | \
+ dd bs=512 count=1 conv=sync; \
+ dd if=$(call imgname,$(1),whr-g300n)-sysupgrade.bin; \
+ ) > $(KDIR)/whr-g300n-tftp.tmp
+ buffalo-tftp -i $(KDIR)/whr-g300n-tftp.tmp \
+ -o $(call imgname,$(1),whr-g300n)-tftp.bin
+endef
+
+define Image/Build/Profile/HW5503G
+ $(call Image/Build/Template/GENERIC_8M,$(1),hw550-3g,HW550-3G)
+endef
+
+define Image/Build/Profile/MOFI35003GN
+ $(call Image/Build/Template/GENERIC_8M,$(1),mofi3500-3gn,MOFI3500-3GN)
+endef
+
+define Image/Build/Profile/WCR150GN
+ $(call Image/Build/Template/GENERIC_4M,$(1),wcr150gn,WCR150GN)
+endef
+
+
+mtdlayout_argus_atp52b=mtdparts=physmap-flash.0:192k(bootloader)ro,64k(config),64k(factory),1152k(kernel),6656k(rootfs),7808k@0x50000(firmware)
+mtd_argus_atp52b_kernel_part_size=1179648
+mtd_argus_atp52b_rootfs_part_size=6815744
+define Image/Build/Template/ARGUS_ATP52B
+ $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_argus_atp52b,$(mtd_argus_atp52b_kernel_part_size),$(mtd_argus_atp52b_rootfs_part_size))
+endef
+
+define Image/Build/Profile/ARGUS_ATP52B
+ $(call Image/Build/Template/ARGUS_ATP52B,$(1),argus_atp52b,ARGUS_ATP52B)
+endef
+
+mtdlayout_f5d8235=mtdparts=physmap-flash.0:320k(u-boot)ro,1536k(kernel),6208k(rootfs),64k(nvram),64k(factory),7744k@0x50000(firmware)
+mtd_f5d8235_kernel_part_size=1572864
+mtd_f5d8235_rootfs_part_size=6356992
+define Image/Build/Template/F5D8235V2
+ $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_f5d8235,$(mtd_f5d8235_kernel_part_size),$(mtd_f5d8235_rootfs_part_size))
+endef
+
+define Image/Build/Profile/F5D8235V2
+ $(call Image/Build/Template/F5D8235V2,$(1),f5d8235v2,F5D8235_V2)
+endef
+
+
+mtdlayout_wr5123gn=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
+mtdlayout_wr5123gn8m=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),7040k(rootfs),7872k@0x50000(firmware)
+define Image/Build/Profile/WR5123GN
+ $(call BuildFirmware/Generic,$(1),wr512-3gn-4M,board="WR512-3GN",mtdlayout_wr5123gn,851968,3014656)
+ $(call BuildFirmware/Generic,$(1),wr512-3gn-8M,board="WR512-3GN",mtdlayout_wr5123gn8m,851968,7208960)
+endef
+
+
+ifeq ($(CONFIG_RALINK_RT305X),y)
+define Image/Build/Profile/Default
+ $(call Image/Build/Profile/ARGUS_ATP52B,$(1))
+ $(call Image/Build/Profile/BC2,$(1))
+ $(call Image/Build/Profile/DIR300B1,$(1))
+ $(call Image/Build/Profile/RTG32B1,$(1))
+ $(call Image/Build/Profile/FONERA20N,$(1))
+ $(call Image/Build/Profile/V22RW2X2,$(1))
+ $(call Image/Build/Profile/NBG419N,$(1))
+ $(call Image/Build/Profile/NW718,$(1))
+ $(call Image/Build/Profile/PWH2004,$(1))
+ $(call Image/Build/Profile/WHRG300N,$(1))
+ $(call Image/Build/Profile/WCR150GN,$(1))
+ $(call Image/Build/Profile/F5D8235V2,$(1))
+ $(call Image/Build/Profile/HW5503G,$(1))
+ $(call Image/Build/Profile/MOFI35003GN,$(1))
+ $(call Image/Build/Profile/WR5123GN,$(1))
+endef
+endif
+
+
+define Image/Build/Profile/RTN15
+ $(call Image/Build/Template/GENERIC_4M,$(1),rt-n15,RT-N15)
+endef
+
+ifeq ($(CONFIG_RALINK_RT288X),y)
+define Image/Build/Profile/Default
+ $(call Image/Build/Profile/RTN15,$(1))
+endef
+endif
+
define Image/Build/squashfs
$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
endef
define Image/Build
$(call Image/Build/$(1))
- ( \
- dd if=$(KDIR)/uImage.lzma bs=1024k conv=sync; \
- dd if=$(KDIR)/root.$(1) bs=65536 conv=sync; \
- ) > $(BIN_DIR)/openwrt-$(BOARD)-$(1).img
+ dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
+ $(call Image/Build/Profile/$(PROFILE),$(1))
endef
$(eval $(call BuildImage))
projects / openwrt.git / blobdiff