make opkg the default package manager, disable busybox ipkg from building by default
[openwrt.git] / package / base-files / files / lib / network / config.sh
index 98d6f13..13e1980 100755 (executable)
@@ -40,10 +40,11 @@ scan_interfaces() {
                                append interfaces "$CONFIG_SECTION"
                                config_get iftype "$CONFIG_SECTION" type
                                config_get ifname "$CONFIG_SECTION" ifname
-                               config_set "$CONFIG_SECTION" device "$ifname"
+                               config_get device "$CONFIG_SECTION" device
+                               config_set "$CONFIG_SECTION" device "${device:-$ifname}"
                                case "$iftype" in
                                        bridge)
-                                               config_set "$CONFIG_SECTION" ifnames "$ifname"
+                                               config_set "$CONFIG_SECTION" ifnames "${device:-$ifname}"
                                                config_set "$CONFIG_SECTION" ifname br-"$CONFIG_SECTION"
                                        ;;
                                esac
@@ -60,7 +61,19 @@ add_vlan() {
        [ "$1" = "$vif" ] || ifconfig "$1" >/dev/null 2>/dev/null || {
                ifconfig "$vif" up 2>/dev/null >/dev/null || add_vlan "$vif"
                $DEBUG vconfig add "$vif" "${1##*\.}"
+               return 0
        }
+       return 1
+}
+
+# sort the device list, drop duplicates
+sort_list() {
+       local arg="$*"
+       (
+               for item in $arg; do
+                       echo "$item"
+               done
+       ) | sort -u
 }
 
 # Create the interface, if necessary.
@@ -83,7 +96,7 @@ prepare_interface() {
        }
 
        # Setup VLAN interfaces
-       add_vlan "$iface"
+       add_vlan "$iface" && return 1
        ifconfig "$iface" 2>/dev/null >/dev/null || return 0
 
        # Setup bridging
@@ -93,6 +106,13 @@ prepare_interface() {
                bridge)
                        [ -x /usr/sbin/brctl ] && {
                                ifconfig "br-$config" 2>/dev/null >/dev/null && {
+                                       local newdevs=
+
+                                       config_get devices "$config" device
+                                       for dev in $(sort_list "$devices" "$iface"); do
+                                               append newdevs "$dev"
+                                       done
+                                       uci_set_state network "$config" device "$newdevs"
                                        $DEBUG brctl addif "br-$config" "$iface"
                                        # Bridge existed already. No further processing necesary
                                } || {
@@ -113,6 +133,75 @@ prepare_interface() {
        return 0
 }
 
+set_interface_ifname() {
+       local config="$1"
+       local ifname="$2"
+
+       config_get device "$1" device
+       uci_set_state network "$config" ifname "$ifname"
+       uci_set_state network "$config" device "$device"
+}
+
+setup_interface_static() {
+       local iface="$1"
+       local config="$2"
+
+       config_get ipaddr "$config" ipaddr
+       config_get netmask "$config" netmask
+       config_get ip6addr "$config" ip6addr
+       [ -z "$ipaddr" -o -z "$netmask" ] && [ -z "$ip6addr" ] && return 1
+       
+       config_get gateway "$config" gateway
+       config_get ip6gw "$config" ip6gw
+       config_get dns "$config" dns
+       config_get bcast "$config" broadcast
+       
+       [ -z "$ipaddr" ] || $DEBUG ifconfig "$iface" "$ipaddr" netmask "$netmask" broadcast "${bcast:-+}"
+       [ -z "$ip6addr" ] || $DEBUG ifconfig "$iface" add "$ip6addr"
+       [ -z "$gateway" ] || $DEBUG route add default gw "$gateway" dev "$iface"
+       [ -z "$ip6gw" ] || $DEBUG route -A inet6 add default gw "$ip6gw" dev "$iface"
+       [ -z "$dns" ] || {
+               for ns in $dns; do
+                       grep "$ns" /tmp/resolv.conf.auto 2>/dev/null >/dev/null || {
+                               echo "nameserver $ns" >> /tmp/resolv.conf.auto
+                       }
+               done
+       }
+
+       env -i ACTION="ifup" INTERFACE="$config" DEVICE="$iface" PROTO=static /sbin/hotplug-call "iface" &
+}
+
+setup_interface_alias() {
+       local config="$1"
+       local parent="$2"
+       local iface="$3"
+
+       config_get cfg "$config" interface
+       [ "$parent" == "$cfg" ] || return 0
+
+       # alias counter
+       config_get ctr "$parent" alias_count
+       ctr="$(($ctr + 1))"
+       config_set "$parent" alias_count "$ctr"
+
+       # alias list
+       config_get list "$parent" aliases
+       append list "$config"
+       config_set "$parent" aliases "$list"
+
+       set_interface_ifname "$config" "$iface:$ctr"
+       config_get proto "$config" proto
+       case "${proto:-static}" in
+               static)
+                       setup_interface_static "$iface:$ctr" "$config"
+               ;;
+               *) 
+                       echo "Unsupported type '$proto' for alias config '$config'"
+                       return 1
+               ;;
+       esac
+}
+
 setup_interface() {
        local iface="$1"
        local config="$2"
@@ -140,57 +229,35 @@ setup_interface() {
        config_get macaddr "$config" macaddr
        grep "$iface:" /proc/net/dev > /dev/null && \
                $DEBUG ifconfig "$iface" ${macaddr:+hw ether "$macaddr"} ${mtu:+mtu $mtu} up
-       uci set "/var/state/network.$config.ifname=$iface"
+       set_interface_ifname "$config" "$iface"
 
        pidfile="/var/run/$iface.pid"
        case "$proto" in
                static)
-                       config_get ipaddr "$config" ipaddr
-                       config_get netmask "$config" netmask
-                       config_get ip6addr "$config" ip6addr
-                       [ -z "$ipaddr" -o -z "$netmask" ] && [ -z "$ip6addr" ] && return 1
-                       
-                       config_get gateway "$config" gateway
-                       config_get ip6gw "$config" ip6gw
-                       config_get dns "$config" dns
-                       config_get bcast "$config" broadcast
-                       
-                       [ -z "$ipaddr" ] || $DEBUG ifconfig "$iface" "$ipaddr" netmask "$netmask" broadcast "${bcast:-+}"
-                       [ -z "$ip6addr" ] || $DEBUG ifconfig "$iface" add "$ip6addr"
-                       [ -z "$gateway" ] || $DEBUG route add default gw "$gateway"
-                       [ -z "$ip6gw" ] || $DEBUG route -A inet6 add default gw "$ip6gw"
-                       [ -z "$dns" ] || {
-                               for ns in $dns; do
-                                       grep "$ns" /tmp/resolv.conf.auto 2>/dev/null >/dev/null || {
-                                               echo "nameserver $ns" >> /tmp/resolv.conf.auto
-                                       }
-                               done
-                       }
-
-                       env -i ACTION="ifup" INTERFACE="$config" DEVICE="$iface" PROTO=static /sbin/hotplug-call "iface" &
+                       setup_interface_static "$iface" "$config"
                ;;
                dhcp)
                        # prevent udhcpc from starting more than once
                        lock "/var/lock/dhcp-$iface"
                        pid="$(cat "$pidfile" 2>/dev/null)"
-                       [ -d "/proc/$pid" ] && grep udhcpc "/proc/${pid}/cmdline" >/dev/null 2>/dev/null && {
+                       if [ -d "/proc/$pid" ] && grep udhcpc "/proc/${pid}/cmdline" >/dev/null 2>/dev/null; then
                                lock -u "/var/lock/dhcp-$iface"
-                               return 0
-                       }
+                       else
 
-                       config_get ipaddr "$config" ipaddr
-                       config_get netmask "$config" netmask
-                       config_get hostname "$config" hostname
-                       config_get proto1 "$config" proto
-                       config_get clientid "$config" clientid
+                               config_get ipaddr "$config" ipaddr
+                               config_get netmask "$config" netmask
+                               config_get hostname "$config" hostname
+                               config_get proto1 "$config" proto
+                               config_get clientid "$config" clientid
 
-                       [ -z "$ipaddr" ] || \
-                               $DEBUG ifconfig "$iface" "$ipaddr" ${netmask:+netmask "$netmask"}
+                               [ -z "$ipaddr" ] || \
+                                       $DEBUG ifconfig "$iface" "$ipaddr" ${netmask:+netmask "$netmask"}
 
-                       # don't stay running in background if dhcp is not the main proto on the interface (e.g. when using pptp)
-                       [ ."$proto1" != ."$proto" ] && dhcpopts="-n -q"
-                       $DEBUG eval udhcpc -t 0 -i "$iface" ${ipaddr:+-r $ipaddr} ${hostname:+-H $hostname} ${clientid:+-c $clientid} -b -p "$pidfile" ${dhcpopts:- -R &}
-                       lock -u "/var/lock/dhcp-$iface"
+                               # don't stay running in background if dhcp is not the main proto on the interface (e.g. when using pptp)
+                               [ ."$proto1" != ."$proto" ] && dhcpopts="-n -q"
+                               $DEBUG eval udhcpc -t 0 -i "$iface" ${ipaddr:+-r $ipaddr} ${hostname:+-H $hostname} ${clientid:+-c $clientid} -b -p "$pidfile" ${dhcpopts:- -R &}
+                               lock -u "/var/lock/dhcp-$iface"
+                       fi
                ;;
                *)
                        if ( eval "type setup_interface_$proto" ) >/dev/null 2>/dev/null; then
@@ -201,6 +268,11 @@ setup_interface() {
                        fi
                ;;
        esac
+       config_set "$config" aliases ""
+       config_set "$config" alias_count 0
+       config_foreach setup_interface_alias alias "$config" "$iface"
+       config_get aliases "$config" aliases
+       [ -z "$aliases" ] || uci_set_state network "$config" aliases "$aliases"
 }
 
 unbridge() {
This page took 0.026513 seconds and 4 git commands to generate.