ramips: use uncached address in detect_mem_size

[openwrt.git] / target / linux / ramips / files / arch / mips / ralink / rt305x / mach-dir-300-revb.c

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-300-revb.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-300-revb.c
index dd2a5f4..70a2245 100644 (file)
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-300-revb.c
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-300-revb.c
@@ -31,7 +31,6 @@
 
 #define DIR_300B_BUTTONS_POLL_INTERVAL 20
 
-#ifdef CONFIG_MTD_PARTITIONS
 static struct mtd_partition dir_300b_partitions[] = {
        {
                .name   = "u-boot",
@@ -51,37 +50,34 @@ static struct mtd_partition dir_300b_partitions[] = {
        }, {
                .name   = "kernel",
                .offset = 0x050000,
-               .size   = 0x090000,
+               .size   = 0x0d0000,
        }, {
                .name   = "rootfs",
-               .offset = 0x140000,
-               .size   = 0x2B0000,
+               .offset = 0x120000,
+               .size   = 0x2e0000,
        }, {
-               .name   = "openwrt",
+               .name   = "firmware",
                .offset = 0x050000,
-               .size   = 0x3a0000,
+               .size   = 0x3b0000,
        }
 };
-#endif /* CONFIG_MTD_PARTITIONS */
 
 static struct physmap_flash_data dir_300b_flash_data = {
-#ifdef CONFIG_MTD_PARTITIONS
        .nr_parts       = ARRAY_SIZE(dir_300b_partitions),
        .parts          = dir_300b_partitions,
-#endif
 };
 
 static struct gpio_led dir_300b_leds_gpio[] __initdata = {
        {
-               .name           = "dir-300b:amber:status",
+               .name           = "d-link:amber:status",
                .gpio           = DIR_300B_GPIO_LED_STATUS_AMBER,
                .active_low     = 1,
        }, {
-               .name           = "dir-300b:green:status",
+               .name           = "d-link:green:status",
                .gpio           = DIR_300B_GPIO_LED_STATUS_GREEN,
                .active_low     = 1,
        }, {
-               .name           = "dir-300b:blue:wps",
+               .name           = "d-link:blue:wps",
                .gpio           = DIR_300B_GPIO_LED_WPS,
                .active_low     = 1,
        }
@@ -91,14 +87,14 @@ static struct gpio_button dir_300b_gpio_buttons[] __initdata = {
        {
                .desc           = "reset",
                .type           = EV_KEY,
-               .code           = BTN_0,
+               .code           = KEY_RESTART,
                .threshold      = 3,
                .gpio           = DIR_300B_GPIO_BUTTON_RESET,
                .active_low     = 1,
        }, {
                .desc           = "wps",
                .type           = EV_KEY,
-               .code           = BTN_1,
+               .code           = KEY_WPS_BUTTON,
                .threshold      = 3,
                .gpio           = DIR_300B_GPIO_BUTTON_WPS,
                .active_low     = 1,
@@ -110,13 +106,22 @@ static void __init dir_300b_init(void)
        rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
 
        rt305x_register_flash(0, &dir_300b_flash_data);
+       rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
        rt305x_register_ethernet();
        ramips_register_gpio_leds(-1, ARRAY_SIZE(dir_300b_leds_gpio),
                                  dir_300b_leds_gpio);
        ramips_register_gpio_buttons(-1, DIR_300B_BUTTONS_POLL_INTERVAL,
                                     ARRAY_SIZE(dir_300b_gpio_buttons),
                                     dir_300b_gpio_buttons);
+       rt305x_register_wifi();
+       rt305x_register_wdt();
 }
 
-MIPS_MACHINE(RAMIPS_MACH_DIR_300_REVB, "DIR-300-revB", "D-Link DIR-300 revB",
+MIPS_MACHINE(RAMIPS_MACH_DIR_300_B1, "DIR-300-B1", "D-Link DIR-300 B1",
+            dir_300b_init);
+
+MIPS_MACHINE(RAMIPS_MACH_DIR_600_B1, "DIR-600-B1", "D-Link DIR-600 B1",
+            dir_300b_init);
+
+MIPS_MACHINE(RAMIPS_MACH_DIR_600_B2, "DIR-600-B2", "D-Link DIR-600 B2",
             dir_300b_init);