++ baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
++ if (baselen > skb->len)
++ return;
++
++ ieee802_11_parse_elems(mgmt->u.probe_resp.variable,
++ skb->len - baselen, &elems);
++
++ rates = ieee80211_sta_get_rates(local, &elems, band);
++
++ rcu_read_lock();
++
++ sta = sta_info_get(sdata, sdata->u.wds.remote_addr);
++
++ if (!sta) {
++ rcu_read_unlock();
++ sta = sta_info_alloc(sdata, sdata->u.wds.remote_addr,
++ GFP_KERNEL);
++ if (!sta)
++ return;
++
++ new = true;
++ }
++
++ sta->last_rx = jiffies;
++ sta->sta.supp_rates[local->hw.conf.channel->band] = rates;
++
++ if (elems.ht_cap_elem)
++ ieee80211_ht_cap_ie_to_sta_ht_cap(sband,
++ elems.ht_cap_elem, &sta->sta.ht_cap);
++
++ if (elems.wmm_param)
++ set_sta_flags(sta, WLAN_STA_WME);
++
++ if (new) {
++ sta->flags = WLAN_STA_AUTHORIZED;
++ rate_control_rate_init(sta);
++ sta_info_insert_rcu(sta);
++ }
++
++ rcu_read_unlock();
++}
++
+ static void ieee80211_iface_work(struct work_struct *work)
+ {
+ struct ieee80211_sub_if_data *sdata =
+@@ -822,6 +863,9 @@ static void ieee80211_iface_work(struct
+ break;
+ ieee80211_mesh_rx_queued_mgmt(sdata, skb);
+ break;
++ case NL80211_IFTYPE_WDS:
++ ieee80211_wds_rx_queued_mgmt(sdata, skb);
++ break;
+ default:
+ WARN(1, "frame for unexpected interface type");
+ break;
+--- a/net/mac80211/rx.c
++++ b/net/mac80211/rx.c
+@@ -2137,7 +2137,8 @@ ieee80211_rx_h_action(struct ieee80211_r
+ */
+ if (sdata->vif.type != NL80211_IFTYPE_STATION &&
+ sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
+- sdata->vif.type != NL80211_IFTYPE_AP)
++ sdata->vif.type != NL80211_IFTYPE_AP &&
++ sdata->vif.type != NL80211_IFTYPE_WDS)
+ break;
+
+ /* verify action_code is present */
+@@ -2335,13 +2336,14 @@ ieee80211_rx_h_mgmt(struct ieee80211_rx_
+
+ if (!ieee80211_vif_is_mesh(&sdata->vif) &&
+ sdata->vif.type != NL80211_IFTYPE_ADHOC &&
+- sdata->vif.type != NL80211_IFTYPE_STATION)
++ sdata->vif.type != NL80211_IFTYPE_STATION &&
++ sdata->vif.type != NL80211_IFTYPE_WDS)
+ return RX_DROP_MONITOR;
+
+ switch (stype) {
+ case cpu_to_le16(IEEE80211_STYPE_BEACON):
+ case cpu_to_le16(IEEE80211_STYPE_PROBE_RESP):
+- /* process for all: mesh, mlme, ibss */
++ /* process for all: mesh, mlme, ibss, wds */
+ break;
+ case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
+ case cpu_to_le16(IEEE80211_STYPE_DISASSOC):
+@@ -2680,10 +2682,16 @@ static int prepare_for_handlers(struct i
+ }
+ break;
+ case NL80211_IFTYPE_WDS:
+- if (bssid || !ieee80211_is_data(hdr->frame_control))
+- return 0;
+ if (compare_ether_addr(sdata->u.wds.remote_addr, hdr->addr2))
+ return 0;
++
++ if (ieee80211_is_data(hdr->frame_control) ||
++ ieee80211_is_action(hdr->frame_control)) {
++ if (compare_ether_addr(sdata->vif.addr, hdr->addr1))
++ return 0;
++ } else if (!ieee80211_is_beacon(hdr->frame_control))
++ return 0;
++
+ break;
+ default:
+ /* should never get here */
+--- a/net/mac80211/sta_info.h
++++ b/net/mac80211/sta_info.h
+@@ -31,7 +31,6 @@
+ * frames.
+ * @WLAN_STA_ASSOC_AP: We're associated to that station, it is an AP.
+ * @WLAN_STA_WME: Station is a QoS-STA.
+- * @WLAN_STA_WDS: Station is one of our WDS peers.
+ * @WLAN_STA_CLEAR_PS_FILT: Clear PS filter in hardware (using the
+ * IEEE80211_TX_CTL_CLEAR_PS_FILT control flag) when the next
+ * frame to this station is transmitted.
+@@ -54,7 +53,6 @@ enum ieee80211_sta_info_flags {
+ WLAN_STA_SHORT_PREAMBLE = 1<<4,
+ WLAN_STA_ASSOC_AP = 1<<5,
+ WLAN_STA_WME = 1<<6,
+- WLAN_STA_WDS = 1<<7,
+ WLAN_STA_CLEAR_PS_FILT = 1<<9,
+ WLAN_STA_MFP = 1<<10,
+ WLAN_STA_BLOCK_BA = 1<<11,
+--- a/drivers/net/wireless/ath/ath9k/debug.h
++++ b/drivers/net/wireless/ath/ath9k/debug.h
+@@ -116,6 +116,7 @@ struct ath_tx_stats {
+ u32 tx_bytes_all;
+ u32 queued;
+ u32 completed;
++ u32 xretries;
+ u32 a_aggr;
+ u32 a_queued_hw;
+ u32 a_queued_sw;
+--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
++++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+@@ -4645,10 +4645,16 @@ static void ar9003_hw_set_power_per_rate
+ case 1:
+ break;
+ case 2:
+- scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
++ if (scaledPower > REDUCE_SCALED_POWER_BY_TWO_CHAIN)
++ scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
++ else
++ scaledPower = 0;
+ break;
+ case 3:
+- scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
++ if (scaledPower > REDUCE_SCALED_POWER_BY_THREE_CHAIN)
++ scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
++ else
++ scaledPower = 0;
+ break;
projects / openwrt.git / blobdiff