[toolchain] uClibc: fix build error on ARM targets (closes #5473)

[openwrt.git] / package / madwifi / Makefile

diff --git a/package/madwifi/Makefile b/package/madwifi/Makefile
index dddf82d..5e6273c 100644 (file)
--- a/package/madwifi/Makefile
+++ b/package/madwifi/Makefile
@@ -4,7 +4,6 @@
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
-# $Id$
 
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
@@ -16,7 +15,7 @@ ifneq ($(CONFIG_MADWIFI_UPSTREAM),)
   PKG_RELEASE:=2
 
   PKG_SOURCE:=madwifi-$(PKG_VERSION).tar.gz
-  PKG_SOURCE_URL:=http://downloads.sourceforge.net/madwifi/
+  PKG_SOURCE_URL:=@SF/madwifi
   PKG_MD5SUM:=399d20de8d855a59f20058857c2178ad
 
   PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/madwifi-$(PKG_VERSION)
@@ -31,7 +30,7 @@ else
   PKG_SOURCE_PROTO:=svn
   PKG_SOURCE_VERSION:=$(PKG_REV)
   PKG_SOURCE_SUBDIR:=$(if $(PKG_BRANCH),$(PKG_BRANCH),madwifi-trunk)-$(PKG_VERSION)
-  PKG_SOURCE_URL:=http://svn.madwifi.org/madwifi/$(if $(PKG_BRANCH),branches/$(PKG_BRANCH),trunk)
+  PKG_SOURCE_URL:=http://madwifi-project.org/svn/madwifi/$(if $(PKG_BRANCH),branches/$(PKG_BRANCH),trunk)
   PKG_SOURCE:=$(PKG_SOURCE_SUBDIR).tar.gz
 
   PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(if $(PKG_BRANCH),$(PKG_BRANCH),madwifi-trunk)-$(PKG_VERSION)
@@ -39,10 +38,28 @@ else
   PATCH_DIR=./patches
 endif
 
+HAL_VERSION:=20090508
+HAL_FILE:=ath_hal-$(HAL_VERSION).tgz
+HAL_MD5SUM:=4ab7ae8bdb96c0be388c98bf8f92d5ca
+
 PKG_BUILD_DEPENDS:=wprobe
 
 include $(INCLUDE_DIR)/package.mk
 
+ifdef CONFIG_MADWIFI_COMPRESSION
+  COMPRESSION:=1
+else
+  COMPRESSION:=0
+endif
+
+define Download/hal
+  FILE:=$(HAL_FILE)
+  URL:=http://mirror2.openwrt.org/sources
+  MD5SUM:=$(HAL_MD5SUM)
+endef
+$(eval $(call Download,hal))
+
+
 ifneq ($(CONFIG_TARGET_atheros),)
   BUS:=AHB
 else
@@ -51,11 +68,6 @@ else
   endif
 endif
 
-# XXX: remove this check later when we have PCI support properly detected on all targets
-ifneq ($(CONFIG_TARGET_ar7)$(CONFIG_TARGET_uml),)
-  BUS:=
-endif
-
 ifneq ($(CONFIG_CPU_MIPS32_R2),)
   ifeq ($(ARCH),mips)
     HAL_TARGET:=mips32r2-be-elf
@@ -89,7 +101,7 @@ endif
 ifeq ($(ARCH),powerpc)
   HAL_TARGET:=powerpc-be-elf
 endif
-ifeq ($(BOARD),storm)
+ifeq ($(BOARD),gemini)
   HAL_TARGET:=armv4-le-elf$(if $(CONFIG_EABI_SUPPORT),gnueabi)
 endif
 ifneq ($(CONFIG_TARGET_atheros),)
@@ -145,7 +157,7 @@ ifeq ($(findstring PCI,$(BUS)),PCI)
   MADWIFI_AUTOLOAD+= ath_pci
 endif
 
-MADWIFI_APPLETS:=80211stats athchans athctrl athkey athstats wlanconfig ath_info
+MADWIFI_APPLETS:=80211stats athchans athkey athstats wlanconfig ath_info
 ifdef CONFIG_MADWIFI_DEBUG
   MADWIFI_APPLETS += athdebug 80211debug
 endif
@@ -156,8 +168,8 @@ endif
 define KernelPackage/madwifi
   SUBMENU:=Wireless Drivers
   TITLE:=Driver for Atheros wireless chipsets
-  URL:=http://madwifi.org/
-  DEPENDS:=+wireless-tools @PCI_SUPPORT||TARGET_atheros @!TARGET_ar7 @!TARGET_avr32 @!TARGET_etrax @!TARGET_uml @LINUX_2_6
+  URL:=http://madwifi-project.org/
+  DEPENDS:=+wireless-tools @PCI_SUPPORT||TARGET_atheros @!TARGET_avr32 @!TARGET_etrax @LINUX_2_6
   FILES:=$(MADWIFI_FILES)
   AUTOLOAD:=$(call AutoLoad,50,$(MADWIFI_AUTOLOAD))
 endef
@@ -177,12 +189,13 @@ MADWIFI_INC = \
        -I$(PKG_BUILD_DIR)/ath \
        -I$(PKG_BUILD_DIR)/ath_hal \
        -I$(PKG_BUILD_DIR)/net80211 \
-       -I$(STAGING_DIR)/usr/include \
+       -I$(STAGING_DIR)/usr/include/wprobe \
        -include $(PKG_BUILD_DIR)/include/compat.h
 
 MAKE_ARGS:= \
        PATH="$(TARGET_PATH)" \
        ARCH="$(LINUX_KARCH)" \
+       ARCH-y="$(LINUX_KARCH)" \
        CROSS_COMPILE="$(TARGET_CROSS)" \
        TARGET="$(HAL_TARGET)" \
        TOOLPREFIX="$(KERNEL_CROSS)" \
@@ -190,6 +203,7 @@ MAKE_ARGS:= \
        KERNELPATH="$(LINUX_DIR)" \
        LDOPTS="--no-warn-mismatch " \
        ATH_RATE="ath_rate/$(RATE_CONTROL)" \
+       ATH_CAP_SUPERG_COMP="$(COMPRESSION)" \
        DO_MULTI=1 \
        INCS="$(MADWIFI_INC)" \
        $(if $(CONFIG_MADWIFI_DEBUG),,DEBUG=) WARNINGS="-Wno-unused"
@@ -198,14 +212,10 @@ MAKE_VARS:= \
        COPTS="-DCONFIG_ATHEROS_RATE_DEFAULT='\"$(RATE_CONTROL)\"' -DATH_REVERSE_ENGINEERING=1" \
 
 ifeq ($(CONFIG_MADWIFI_UPSTREAM),)
-  HALFILE:=$(lastword $(sort $(wildcard ./ath_hal-*.tgz)))
-endif
-
-ifneq ($(HALFILE),)
   define Build/Prepare/HAL
        rm -rf $(PKG_BUILD_DIR)/tmp
        mkdir -p $(PKG_BUILD_DIR)/tmp
-       tar xvzf $(HALFILE) -C $(PKG_BUILD_DIR)/tmp
+       tar xvzf $(DL_DIR)/$(HAL_FILE) -C $(PKG_BUILD_DIR)/tmp
        $(CP) $(PKG_BUILD_DIR)/tmp/ath_hal*/* $(PKG_BUILD_DIR)/hal/
        rm -rf $(PKG_BUILD_DIR)/tmp
   endef