return 0;
bad3:
ieee80211_ifdetach(ic);
-@@ -2351,16 +2354,6 @@
+@@ -2349,16 +2352,6 @@
}
if (status & HAL_INT_MIB) {
sc->sc_stats.ast_mib++;
/* Let the HAL handle the event. */
ath_hal_mibevent(ah, &sc->sc_halstats);
}
-@@ -2430,6 +2423,43 @@
+@@ -2428,6 +2421,43 @@
return flags;
}
/*
* Context: process context
*/
-@@ -2495,8 +2525,7 @@
+@@ -2493,8 +2523,7 @@
if (sc->sc_softled)
ath_hal_gpioCfgOutput(ah, sc->sc_ledpin);
/*
* This is needed only to setup initial state
-@@ -2532,7 +2561,7 @@
+@@ -2530,7 +2559,7 @@
* Enable MIB interrupts when there are hardware phy counters.
* Note we only do this (at the moment) for station mode.
*/
sc->sc_imask |= HAL_INT_MIB;
ath_hal_intrset(ah, sc->sc_imask);
-@@ -2789,9 +2818,7 @@
+@@ -2787,9 +2816,7 @@
EPRINTF(sc, "Unable to reset hardware: '%s' (HAL status %u)\n",
ath_get_hal_status_desc(status), status);
ath_update_txpow(sc); /* update tx power state */
ath_radar_update(sc);
ath_setdefantenna(sc, sc->sc_defant);
-@@ -4176,6 +4203,8 @@
+@@ -4174,6 +4201,8 @@
if (sc->sc_nmonvaps > 0)
rfilt |= (HAL_RX_FILTER_CONTROL | HAL_RX_FILTER_BEACON |
HAL_RX_FILTER_PROBEREQ | HAL_RX_FILTER_PROM);
if (sc->sc_curchan.privFlags & CHANNEL_DFS)
rfilt |= (HAL_RX_FILTER_PHYERR | HAL_RX_FILTER_PHYRADAR);
return rfilt;
-@@ -6526,9 +6555,6 @@
+@@ -6524,9 +6553,6 @@
rs->rs_rssi = 0;
len = rs->rs_datalen;
if (rs->rs_more) {
/*
-@@ -8880,9 +8906,7 @@
+@@ -8874,9 +8900,7 @@
if (sc->sc_softled)
ath_hal_gpioCfgOutput(ah, sc->sc_ledpin);
sc->sc_curchan = hchan;
ath_update_txpow(sc); /* update tx power state */
ath_radar_update(sc);
-@@ -10659,9 +10683,54 @@
+@@ -10653,9 +10677,54 @@
ATH_RP_IGNORED = 24,
ATH_RADAR_IGNORED = 25,
ATH_MAXVAPS = 26,
ATH_SYSCTL_DECL(ath_sysctl_halparam, ctl, write, filp, buffer, lenp, ppos)
{
struct ath_softc *sc = ctl->extra1;
-@@ -10847,6 +10916,11 @@
+@@ -10841,6 +10910,11 @@
case ATH_RADAR_IGNORED:
sc->sc_radar_ignored = val;
break;
default:
ret = -EINVAL;
break;
-@@ -10913,6 +10987,11 @@
+@@ -10907,6 +10981,11 @@
case ATH_RADAR_IGNORED:
val = sc->sc_radar_ignored;
break;
default:
ret = -EINVAL;
break;
-@@ -11090,6 +11169,24 @@
+@@ -11084,6 +11163,24 @@
.proc_handler = ath_sysctl_halparam,
.extra2 = (void *)ATH_RADAR_IGNORED,
},