-
- mutex_unlock(&sc->mutex);
-+ ath9k_ps_restore(sc);
- }
-
- static u64 ath9k_get_tsf(struct ieee80211_hw *hw)
---- a/drivers/net/wireless/ath/ath9k/beacon.c
-+++ b/drivers/net/wireless/ath/ath9k/beacon.c
-@@ -392,14 +392,6 @@ void ath_beacon_tasklet(unsigned long da
- tsf += TU_TO_USEC(ah->config.sw_beacon_response_time);
- tsftu = TSF_TO_TU((tsf * ATH_BCBUF) >>32, tsf * ATH_BCBUF);
- slot = (tsftu % (intval * ATH_BCBUF)) / intval;
-- /*
-- * Reverse the slot order to get slot 0 on the TBTT offset that does
-- * not require TSF adjustment and other slots adding
-- * slot/ATH_BCBUF * beacon_int to timestamp. For example, with
-- * ATH_BCBUF = 4, we process beacon slots as follows: 3 2 1 0 3 2 1 ..
-- * and slot 0 is at correct offset to TBTT.
-- */
-- slot = ATH_BCBUF - slot - 1;
- vif = sc->beacon.bslot[slot];
-
- ath_dbg(common, ATH_DBG_BEACON,
-@@ -708,7 +700,7 @@ void ath_beacon_config(struct ath_softc
- if (cur_conf->dtim_period == 0)
- cur_conf->dtim_period = 1;
-
-- switch (iftype) {
-+ switch (sc->sc_ah->opmode) {
- case NL80211_IFTYPE_AP:
- ath_beacon_config_ap(sc, cur_conf);
- break;
---- a/net/mac80211/rx.c
-+++ b/net/mac80211/rx.c
-@@ -1585,7 +1585,7 @@ ieee80211_drop_unencrypted_mgmt(struct i
- }
-
- static int
--__ieee80211_data_to_8023(struct ieee80211_rx_data *rx)
-+__ieee80211_data_to_8023(struct ieee80211_rx_data *rx, bool *port_control)
+--- a/drivers/net/wireless/p54/txrx.c
++++ b/drivers/net/wireless/p54/txrx.c
+@@ -690,7 +690,7 @@ static void p54_tx_80211_header(struct p
+ if (!(info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ))
+ *flags |= P54_HDR_FLAG_DATA_OUT_SEQNR;
+
+- if (info->flags & IEEE80211_TX_CTL_POLL_RESPONSE)
++ if (info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER)
+ *flags |= P54_HDR_FLAG_DATA_OUT_NOCANCEL;
+
+ if (info->flags & IEEE80211_TX_CTL_CLEAR_PS_FILT)
+--- a/include/net/mac80211.h
++++ b/include/net/mac80211.h
+@@ -341,9 +341,9 @@ struct ieee80211_bss_conf {
+ * used to indicate that a frame was already retried due to PS
+ * @IEEE80211_TX_INTFL_DONT_ENCRYPT: completely internal to mac80211,
+ * used to indicate frame should not be encrypted
+- * @IEEE80211_TX_CTL_POLL_RESPONSE: This frame is a response to a poll
+- * frame (PS-Poll or uAPSD) and should be sent although the station
+- * is in powersave mode.
++ * @IEEE80211_TX_CTL_NO_PS_BUFFER: This frame is a response to a poll
++ * frame (PS-Poll or uAPSD) or a non-bufferable MMPDU and must
++ * be sent although the station is in powersave mode.
+ * @IEEE80211_TX_CTL_MORE_FRAMES: More frames will be passed to the
+ * transmit function after the current frame, this can be used
+ * by drivers to kick the DMA queue only if unset or when the
+@@ -399,7 +399,7 @@ enum mac80211_tx_control_flags {
+ IEEE80211_TX_INTFL_NEED_TXPROCESSING = BIT(14),
+ IEEE80211_TX_INTFL_RETRIED = BIT(15),
+ IEEE80211_TX_INTFL_DONT_ENCRYPT = BIT(16),
+- IEEE80211_TX_CTL_POLL_RESPONSE = BIT(17),
++ IEEE80211_TX_CTL_NO_PS_BUFFER = BIT(17),
+ IEEE80211_TX_CTL_MORE_FRAMES = BIT(18),
+ IEEE80211_TX_INTFL_RETRANSMISSION = BIT(19),
+ /* hole at 20, use later */
+@@ -425,7 +425,7 @@ enum mac80211_tx_control_flags {
+ IEEE80211_TX_CTL_SEND_AFTER_DTIM | IEEE80211_TX_CTL_AMPDU | \
+ IEEE80211_TX_STAT_TX_FILTERED | IEEE80211_TX_STAT_ACK | \
+ IEEE80211_TX_STAT_AMPDU | IEEE80211_TX_STAT_AMPDU_NO_BACK | \
+- IEEE80211_TX_CTL_RATE_CTRL_PROBE | IEEE80211_TX_CTL_POLL_RESPONSE | \
++ IEEE80211_TX_CTL_RATE_CTRL_PROBE | IEEE80211_TX_CTL_NO_PS_BUFFER | \
+ IEEE80211_TX_CTL_MORE_FRAMES | IEEE80211_TX_CTL_LDPC | \
+ IEEE80211_TX_CTL_STBC | IEEE80211_TX_STATUS_EOSP)
+
+@@ -1634,7 +1634,7 @@ void ieee80211_free_txskb(struct ieee802
+ * the station sends a PS-Poll or a uAPSD trigger frame, mac80211
+ * will inform the driver of this with the @allow_buffered_frames
+ * callback; this callback is optional. mac80211 will then transmit
+- * the frames as usual and set the %IEEE80211_TX_CTL_POLL_RESPONSE
++ * the frames as usual and set the %IEEE80211_TX_CTL_NO_PS_BUFFER
+ * on each frame. The last frame in the service period (or the only
+ * response to a PS-Poll) also has %IEEE80211_TX_STATUS_EOSP set to
+ * indicate that it ends the service period; as this frame must have
+@@ -1642,6 +1642,9 @@ void ieee80211_free_txskb(struct ieee802
+ * When TX status is reported for this frame, the service period is
+ * marked has having ended and a new one can be started by the peer.
+ *
++ * Additionally, non-bufferable MMPDUs can also be transmitted by
++ * mac80211 with the %IEEE80211_TX_CTL_NO_PS_BUFFER set in them.
++ *
+ * Another race condition can happen on some devices like iwlwifi
+ * when there are frames queued for the station and it wakes up
+ * or polls; the frames that are already queued could end up being
+@@ -2140,7 +2143,7 @@ enum ieee80211_frame_release_type {
+ * @allow_buffered_frames: Prepare device to allow the given number of frames
+ * to go out to the given station. The frames will be sent by mac80211
+ * via the usual TX path after this call. The TX information for frames
+- * released will also have the %IEEE80211_TX_CTL_POLL_RESPONSE flag set
++ * released will also have the %IEEE80211_TX_CTL_NO_PS_BUFFER flag set
+ * and the last one will also have %IEEE80211_TX_STATUS_EOSP set. In case
+ * frames from multiple TIDs are released and the driver might reorder
+ * them between the TIDs, it must set the %IEEE80211_TX_STATUS_EOSP flag
+--- a/net/mac80211/agg-rx.c
++++ b/net/mac80211/agg-rx.c
+@@ -187,6 +187,8 @@ static void ieee80211_send_addba_resp(st
+ memcpy(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN);
+ else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
+ memcpy(mgmt->bssid, sdata->u.ibss.bssid, ETH_ALEN);
++ else if (sdata->vif.type == NL80211_IFTYPE_WDS)
++ memcpy(mgmt->bssid, da, ETH_ALEN);
+
+ mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+ IEEE80211_STYPE_ACTION);
+--- a/net/mac80211/agg-tx.c
++++ b/net/mac80211/agg-tx.c
+@@ -81,7 +81,8 @@ static void ieee80211_send_addba_request
+ memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
+ if (sdata->vif.type == NL80211_IFTYPE_AP ||
+ sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
+- sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
++ sdata->vif.type == NL80211_IFTYPE_MESH_POINT ||
++ sdata->vif.type == NL80211_IFTYPE_WDS)
+ memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
+ else if (sdata->vif.type == NL80211_IFTYPE_STATION)
+ memcpy(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN);
+@@ -471,6 +472,7 @@ int ieee80211_start_tx_ba_session(struct
+ sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
+ sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
+ sdata->vif.type != NL80211_IFTYPE_AP &&
++ sdata->vif.type != NL80211_IFTYPE_WDS &&
+ sdata->vif.type != NL80211_IFTYPE_ADHOC)
+ return -EINVAL;
+
+--- a/net/mac80211/debugfs_sta.c
++++ b/net/mac80211/debugfs_sta.c
+@@ -63,11 +63,11 @@ static ssize_t sta_flags_read(struct fil
+ test_sta_flag(sta, WLAN_STA_##flg) ? #flg "\n" : ""
+
+ int res = scnprintf(buf, sizeof(buf),
+- "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s",
++ "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s",
+ TEST(AUTH), TEST(ASSOC), TEST(PS_STA),
+ TEST(PS_DRIVER), TEST(AUTHORIZED),
+ TEST(SHORT_PREAMBLE),
+- TEST(WME), TEST(WDS), TEST(CLEAR_PS_FILT),
++ TEST(WME), TEST(CLEAR_PS_FILT),
+ TEST(MFP), TEST(BLOCK_BA), TEST(PSPOLL),
+ TEST(UAPSD), TEST(SP), TEST(TDLS_PEER),
+ TEST(TDLS_PEER_AUTH), TEST(4ADDR_EVENT),
+--- a/net/mac80211/iface.c
++++ b/net/mac80211/iface.c
+@@ -178,7 +178,6 @@ static int ieee80211_do_open(struct net_
projects / openwrt.git / blobdiff