[au1000] prevent error messages on the requesting of the GPIO buttons

[openwrt.git] / target / linux / brcm47xx / config-2.6.28

diff --git a/target/linux/brcm47xx/config-2.6.28 b/target/linux/brcm47xx/config-2.6.28
index 71ff7df..fd7ffee 100644 (file)
--- a/target/linux/brcm47xx/config-2.6.28
+++ b/target/linux/brcm47xx/config-2.6.28
@@ -14,13 +14,14 @@ CONFIG_B44_PCICORE_AUTOSELECT=y
 CONFIG_B44_PCI_AUTOSELECT=y
 CONFIG_BASE_SMALL=0
 CONFIG_BCM47XX=y
+CONFIG_BCM47XX_WDT=y
 CONFIG_BITREVERSE=y
 # CONFIG_BSD_DISKLABEL is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_CEVT_R4K=y
 CONFIG_CFE=y
 CONFIG_CLASSIC_RCU=y
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200"
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_PREFETCH=y
@@ -56,8 +57,6 @@ CONFIG_DEVPORT=y
 # CONFIG_DM9000 is not set
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_DMA_NONCOHERENT=y
-# CONFIG_FIXED_PHY is not set
-# CONFIG_FREEZER is not set
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_GENERIC_CMOS_UPDATE=y
@@ -69,7 +68,6 @@ CONFIG_HARDWARE_WATCHPOINTS=y
 CONFIG_HAS_DMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
-# CONFIG_HAVE_AOUT is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_HAVE_IDE=y
@@ -80,20 +78,12 @@ CONFIG_HZ=250
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_I2C is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
 # CONFIG_IDE is not set
 CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_POLLDEV=y
 # CONFIG_IP_ROUTE_VERBOSE is not set
 CONFIG_IRQ_CPU=y
 # CONFIG_ISDN is not set
 CONFIG_KALLSYMS=y
-CONFIG_KMOD=y
-# CONFIG_LEDS_ALIX is not set
 CONFIG_LEDS_GPIO=y
 # CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MACH_ALCHEMY is not set
@@ -103,8 +93,6 @@ CONFIG_LEDS_GPIO=y
 # CONFIG_MACH_TX39XX is not set
 # CONFIG_MACH_TX49XX is not set
 # CONFIG_MACH_VR41XX is not set
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_TMIO is not set
 # CONFIG_MIKROTIK_RB532 is not set
 CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
@@ -115,61 +103,16 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_SIM is not set
-CONFIG_MTD=y
-# CONFIG_MTD_ABSENT is not set
 CONFIG_MTD_BCM47XX=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_MTD_BLOCK2MTD is not set
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_CHAR=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_ONENAND is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_SLRAM is not set
 # CONFIG_NATSEMI is not set
-# CONFIG_NF_DEFRAG_IPV4 is not set
 # CONFIG_NO_IOPORT is not set
 # CONFIG_NXP_STB220 is not set
 # CONFIG_NXP_STB225 is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
-# CONFIG_PAGE_SIZE_16KB is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_PAGE_SIZE_8KB is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_PCSPKR_PLATFORM is not set
 CONFIG_PHYLIB=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_PNX8550_JBS is not set
@@ -178,11 +121,6 @@ CONFIG_PHYLIB=y
 # CONFIG_PROC_KCORE is not set
 # CONFIG_PROM_EMU is not set
 # CONFIG_R6040 is not set
-CONFIG_RFKILL=y
-CONFIG_RFKILL_INPUT=y
-CONFIG_RFKILL_LEDS=y
-CONFIG_RTC_LIB=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
@@ -214,10 +152,8 @@ CONFIG_SSB_EMBEDDED=y
 CONFIG_SSB_PCICORE_HOSTMODE=y
 CONFIG_SSB_PCIHOST=y
 CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_POSSIBLE=y
 CONFIG_SSB_SERIAL=y
 CONFIG_SSB_SPROM=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
@@ -225,8 +161,10 @@ CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 # CONFIG_TC35815 is not set
 CONFIG_TICK_ONESHOT=y
 CONFIG_TRAD_SIGNALS=y
+CONFIG_USB_EHCI_HCD_SSB=y
+CONFIG_USB_OHCI_HCD_SSB=y
 CONFIG_USB_SUPPORT=y
 # CONFIG_VGASTATE is not set
 # CONFIG_VIA_RHINE is not set
-# CONFIG_WATCHDOG is not set
+CONFIG_WATCHDOG_NOWAYOUT=y
 CONFIG_ZONE_DMA_FLAG=0