ar71xx: add driver for the USB LED on the WNDR3700

[openwrt.git] / target / linux / rdc / image / Makefile

diff --git a/target/linux/rdc/image/Makefile b/target/linux/rdc/image/Makefile
index 3c7f476..f8082b0 100644 (file)
--- a/target/linux/rdc/image/Makefile
+++ b/target/linux/rdc/image/Makefile
@@ -1,5 +1,5 @@
-# 
-# Copyright (C) 2006 OpenWrt.org
+#
+# Copyright (C) 2006-2009 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -21,6 +21,10 @@ define trxalign/squashfs
 bs=1024
 endef
 
+define Image/Prepare/squashfs
+       $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
+endef
+
 define Image/Build/ar525w
        touch $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).img
        touch $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2)-web.img
@@ -30,17 +34,18 @@ define Image/Build/ar525w
        $(STAGING_DIR_HOST)/bin/airlink -e -b 1 -j $(shell bash -c 'echo $$[$(3)]') $(KDIR)/bzImage $(KDIR)/root.$(1) $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2)-web.img
 endef
 
-define Image/Build/wl153
-       ls -l $(KDIR)/bzImage | sed -r 's/^[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+([^[:blank:]]+).+$$$$/\1/' | xargs printf '%.8x' > $(KDIR)/bzSize
-       gzip -9c $(KDIR)/root.$(1) > $(KDIR)/root.$(1).gz
-       ls -l $(KDIR)/root.$(1).gz | sed -r 's/^[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+([^[:blank:]]+).+$$$$/\1/' | xargs printf '%.8x' > $(KDIR)/rdSize
-       echo -ne "\x$$$$(cut -c 7,8 < $(KDIR)/bzSize)\x$$$$(cut -c 5,6 < $(KDIR)/bzSize)\x$$$$(cut -c 3,4 < $(KDIR)/bzSize)\x$$$$(cut -c 1,2 < $(KDIR)/bzSize)" > $(KDIR)/bzSize.tmp
-       echo -n 'CSYS' > $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).img
-       cat $(KDIR)/bzSize.tmp >> $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).img
-       echo -ne "\x$$$$(cut -c 7,8 < $(KDIR)/rdSize)\x$$$$(cut -c 5,6 < $(KDIR)/rdSize)\x$$$$(cut -c 3,4 < $(KDIR)/rdSize)\x$$$$(cut -c 1,2 < $(KDIR)/rdSize)WRRM" >> $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).img
-       cat $(KDIR)/bzSize.tmp $(KDIR)/bzImage $(KDIR)/root.$(1).gz >> $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).img
-       $(RM) $(KDIR)/bzSize.tmp $(KDIR)/bzSize $(KDIR)/rdSize
-       if [ `ls -l $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).img | sed -r 's/^[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+([^[:blank:]]+).+$$$$/\1/'` -gt $$$$((0xffff0000-0xffe08000)) ]; then mv $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).img $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).img.too_big; echo "#ERR image too big"; fi 
+define Image/Postprocess/sitecom/squashfs
+       dd if=/dev/zero of=$(KDIR)/tmp2.img count=1 bs=32k #32k config data a start of flash
+       cat $(KDIR)/tmp.img >> $(KDIR)/tmp2.img
+       $(call prepare_generic_squashfs,$(KDIR)/tmp2.img)
+       dd if=$(KDIR)/tmp2.img of=$(KDIR)/tmp.img bs=32k skip=1
+endef
+
+define Image/Build/sitecom
+       $(TOPDIR)/target/linux/rdc/image/mkimg_sitecom.pl $(KDIR)/bzImage > $(KDIR)/tmp.img
+       cat $(KDIR)/root.$(1) >> $(KDIR)/tmp.img
+       $(call Image/Postprocess/sitecom/$(1))
+       cp $(KDIR)/tmp.img $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).img
 endef
 
 define Image/Build/dir450
@@ -51,6 +56,7 @@ define Image/Build/dir450
 endef
 
 define Image/Build/g570s
+       $(call Image/Prepare/$(1))
        mv $(KDIR)/root.$(1) $(KDIR)/root.tmp
        dd of=$(KDIR)/root.$(1) if=$(KDIR)/root.tmp $(call trxalign/$(1)) conv=sync
        $(CP) $(KDIR)/bzImage $(BIN_DIR)/openwrt-tftp-$(BOARD)-$(1)-$(2).img
@@ -61,7 +67,17 @@ define Image/Build/g570s
        $(RM) -r $(KDIR)/zyxel.tmp
 endef
 
+define Image/Prepare/amit/squashfs
+       echo -n "0123456789abcdef" > $(KDIR)/root.tmp
+       cat $(KDIR)/root.squashfs >> $(KDIR)/root.tmp
+       dd if=$(KDIR)/root.tmp of=$(KDIR)/root2.tmp bs=64k conv=sync
+       dd if=$(KDIR)/root2.tmp of=$(KDIR)/root.squashfs bs=1 skip=16
+       $(RM) $(KDIR)/root.tmp $(KDIR)/root2.tmp
+       $(call add_jffs2_mark,$(KDIR)/root.squashfs)
+endef
+
 define Image/Build/amit
+       $(call Image/Prepare/amit/$(1))
        if [ ! -x $(STAGING_DIR_HOST)/bin/amit_makebin ]; then echo "#ERR Please copy the AMIT \"makebin\" tool from http://mgb111.pradnik.net/ as $(STAGING_DIR_HOST)/bin/amit_makebin to build."; fi
        sh -c "mkdir -p $(KDIR)/amit.tmp/linux_src/arch/i386/boot $(KDIR)/amit.tmp/rom_disk && cd $(KDIR)/amit.tmp && ln -s ../../root.$(1) rom_disk/fs.img && ln -s ../../../../../bzImage linux_src/arch/i386/boot && $(STAGING_DIR_HOST)/bin/amit_makebin && mv upgrade.img $(BIN_DIR)/openwrt-$(BOARD)-$(1)-anas350.bin" || :
        $(RM) -r $(KDIR)/amit.tmp
@@ -74,7 +90,7 @@ endef
 
 define Image/Build
        $(CP) $(KDIR)/bzImage $(BIN_DIR)/openwrt-$(BOARD).bzImage
-       $(call Image/Build/$(PROFILE),$(1),$(PROFILE),$(patsubst jffs2-%k,%,$(1)))
+       $(call Image/Build/$(SUBTARGET),$(1),$(SUBTARGET),$(patsubst jffs2-%k,%,$(1)))
 ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
        $(call Image/Build/Initramfs)
 endif