#
-# Copyright (C) 2006 OpenWrt.org
+# Copyright (C) 2006-2010 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
include $(INCLUDE_DIR)/image.mk
export PATH=$(TARGET_PATH):/sbin
+
+ifneq ($(CONFIG_TARGET_x86_olpc),y)
BOOTOPTS=$(strip $(subst ",, $(CONFIG_X86_GRUB_BOOTOPTS)))
ROOTPART=$(strip $(subst ",, $(CONFIG_X86_GRUB_ROOTPART)))
#"))")) # fix vim's broken syntax highlighting
+endif
+
+ifeq ($(CONFIG_TARGET_x86_olpc),y)
+ROOTPART=$(strip $(subst ",, $(CONFIG_OLPC_BOOTSCRIPT_ROOTPART)))
+endif
+#"))")) # fix vim's broken syntax highlighting
+
+GRUB_TERMINALS =
+GRUB_SERIAL_CONFIG =
+GRUB_TERMINAL_CONFIG =
+GRUB_CONSOLE_CMDLINE =
+
+ifeq ($(CONFIG_X86_GRUB_CONSOLE),y)
+GRUB_CONSOLE_CMDLINE += console=tty0
+GRUB_TERMINALS += console
+endif
+
+ifneq ($(CONFIG_X86_GRUB_SERIAL),)
+GRUB_CONSOLE_CMDLINE += console=$(strip $(subst ",, $(CONFIG_X86_GRUB_SERIAL))),$(CONFIG_X86_GRUB_BAUDRATE)n8
+GRUB_SERIAL_CONFIG = serial --unit=0 --speed=$(CONFIG_X86_GRUB_BAUDRATE) --word=8 --parity=no --stop=1
+GRUB_TERMINALS += serial
+endif
+
+ifneq ($(GRUB_TERMINALS),)
+GRUB_TERMINAL_CONFIG = terminal --timeout=2 $(GRUB_TERMINALS)
+endif
ifeq ($(CONFIG_X86_GRUB_IMAGES),y)
+ifneq ($(HOST_OS),Darwin)
define Image/cmdline/squashfs
- block2mtd.block2mtd=$(ROOTPART),65536,rootfs root=/dev/mtdblock0 rootfstype=squashfs init=/etc/preinit
+ block2mtd.block2mtd=$(ROOTPART),65536,rootfs root=/dev/mtdblock0 rootfstype=squashfs rootwait
endef
define Image/cmdline/jffs2-64k
- block2mtd.block2mtd=$(ROOTPART),65536,rootfs root=/dev/mtdblock0 rootfstype=jffs2 init=/etc/preinit
+ block2mtd.block2mtd=$(ROOTPART),65536,rootfs root=/dev/mtdblock0 rootfstype=jffs2 rootwait
endef
define Image/cmdline/jffs2-128k
- block2mtd.block2mtd=$(ROOTPART),131072,rootfs root=/dev/mtdblock0 rootfstype=jffs2 init=/etc/preinit
+ block2mtd.block2mtd=$(ROOTPART),131072,rootfs root=/dev/mtdblock0 rootfstype=jffs2 rootwait
endef
define Image/cmdline/ext2
- root=$(ROOTPART) rootfstype=ext2 init=/etc/preinit
+ root=$(ROOTPART) rootfstype=ext2 rootwait
endef
define Image/Build/grub
$(KDIR)/root.grub/boot/grub/
$(CP) $(KDIR)/bzImage $(KDIR)/root.grub/boot/vmlinuz
sed \
- -e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1))) $(BOOTOPTS)#g' \
- -e 's#@BAUDRATE@#$(CONFIG_X86_GRUB_BAUDRATE)#g' \
+ -e 's#@SERIAL_CONFIG@#$(strip $(GRUB_SERIAL_CONFIG))#g' \
+ -e 's#@TERMINAL_CONFIG@#$(strip $(GRUB_TERMINAL_CONFIG))#g' \
+ -e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1)) $(BOOTOPTS) $(GRUB_CONSOLE_CMDLINE))#g' \
./menu.lst > $(KDIR)/root.grub/boot/grub/menu.lst
- PADDING="$(CONFIG_X86_GRUB_IMAGES_PAD)" PATH="$(TARGET_PATH)" ./gen_image.sh $(BIN_DIR)/openwrt-$(BOARD)-$(1).image $(CONFIG_X86_GRUB_KERNELPART) $(KDIR)/root.grub $(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1)
+ PADDING="$(CONFIG_X86_GRUB_IMAGES_PAD)" PATH="$(TARGET_PATH)" ./gen_image_x86.sh $(BIN_DIR)/$(IMG_PREFIX)-$(1).image $(CONFIG_X86_GRUB_KERNELPART) $(KDIR)/root.grub $(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1)
$(call Image/Build/grub/$(1))
endef
-endif
-ifeq ($(CONFIG_X86_GRUB_IMAGES),y)
define Image/Prepare/grub
# for the image builder
$(CP) \
- $(STAGING_DIR_HOST)/usr/lib/grub/i386-pc/stage1 \
- $(STAGING_DIR_HOST)/usr/lib/grub/i386-pc/stage2 \
- $(STAGING_DIR_HOST)/usr/lib/grub/i386-pc/e2fs_stage1_5 \
+ $(STAGING_DIR_HOST)/usr/lib/grub/i386-*/stage1 \
+ $(STAGING_DIR_HOST)/usr/lib/grub/i386-*/stage2 \
+ $(STAGING_DIR_HOST)/usr/lib/grub/i386-*/e2fs_stage1_5 \
$(KDIR)/
endef
+else
+ define Image/Build/grub
+ PADDING="$(CONFIG_X86_GRUB_IMAGES_PAD)" PATH="$(TARGET_PATH)" NOGRUB=1 ./gen_image_x86.sh $(BIN_DIR)/$(IMG_PREFIX)-$(1).image $(CONFIG_X86_GRUB_KERNELPART) "" $(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1)
+ endef
+endif
endif
ifeq ($(CONFIG_X86_VDI_IMAGES),y)
define Image/Build/vdi
# left here because the image builder doesnt need these
ifeq ($(1),ext2)
- rm $(BIN_DIR)/openwrt-$(BOARD)-ext2.vdi || true
- vditool DD $(BIN_DIR)/openwrt-$(BOARD)-ext2.vdi $(BIN_DIR)/openwrt-$(BOARD)-ext2.image
+ rm $(BIN_DIR)/$(IMG_PREFIX)-ext2.vdi || true
+ VBoxManage convertfromraw -format VDI $(BIN_DIR)/$(IMG_PREFIX)-ext2.image $(BIN_DIR)/$(IMG_PREFIX)-ext2.vdi
+ endif
+ endef
+endif
+
+ifeq ($(CONFIG_X86_VMDK_IMAGES),y)
+ define Image/Build/vmdk
+ # left here because the image builder doesnt need these
+ ifeq ($(1),ext2)
+ rm $(BIN_DIR)/$(IMG_PREFIX)-ext2.vmdk || true
+ qemu-img convert -f raw $(BIN_DIR)/$(IMG_PREFIX)-ext2.image \
+ -O vmdk $(BIN_DIR)/$(IMG_PREFIX)-ext2.vmdk
endif
endef
endif
+ROOTDELAY=10
+
+ifeq ($(CONFIG_OLPC_BOOTSCRIPT_IMAGES),y)
+ define Image/cmdline/squashfs
+ block2mtd.block2mtd=$(ROOTPART),65536,rootfs root=/dev/mtdblock0 rootfstype=squashfs rootdelay=$(ROOTDELAY)
+ endef
+
+ define Image/cmdline/jffs2-64k
+ block2mtd.block2mtd=$(ROOTPART),65536,rootfs root=/dev/mtdblock0 rootfstype=jffs2 rootdelay=$(ROOTDELAY)
+ endef
+
+ define Image/cmdline/jffs2-128k
+ block2mtd.block2mtd=$(ROOTPART),131072,rootfs root=/dev/mtdblock0 rootfstype=jffs2 rootdelay=$(ROOTDELAY)
+ endef
+
+ define Image/cmdline/ext2
+ root=$(ROOTPART) rootfstype=ext2 rootwait
+ endef
+
+ define Image/Build/bootscript
+ # left here because the image builder doesnt need these
+ $(INSTALL_DIR) $(KDIR)/root.bootscript/boot
+ $(CP) $(KDIR)/bzImage $(KDIR)/root.bootscript/boot/vmlinuz
+ sed -e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1))) $(BOOTOPTS)#g' \
+ ./olpc.fth > $(KDIR)/root.bootscript/boot/olpc.fth
+ PADDING="$(CONFIG_OLPC_BOOTSCRIPT_IMAGES_PAD)" PATH="$(TARGET_PATH)" ./gen_image_olpc.sh $(BIN_DIR)/$(IMG_PREFIX)-$(1).image $(CONFIG_OLPC_BOOTSCRIPT_KERNELPART) $(KDIR)/root.bootscript $(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1)
+ endef
+endif
define Image/Prepare
$(CP) $(LINUX_DIR)/arch/x86/boot/bzImage $(KDIR)/bzImage
+ifeq ($(CONFIG_TARGET_x86_olpc),y)
+ $(call Image/Prepare/bootscript)
+else
$(call Image/Prepare/grub)
+endif
endef
-
+
define Image/Build/squashfs
$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
endef
define Image/Build/iso
+ $(INSTALL_DIR) $(KDIR)/root.grub/boot/grub
$(CP) \
- $(STAGING_DIR_HOST)/usr/lib/grub/i386-pc/stage2_eltorito \
+ $(STAGING_DIR_HOST)/usr/lib/grub/i386-openwrt/stage2_eltorito \
$(KDIR)/root.grub/boot/grub/stage2_eltorito
- sed -i \
- -e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1))) $(BOOTOPTS)#g' \
- -e 's#@BAUDRATE@#$(CONFIG_X86_GRUB_BAUDRATE)#g' \
+ sed \
+ -e 's#@SERIAL_CONFIG@#$(strip $(GRUB_SERIAL_CONFIG))#g' \
+ -e 's#@TERMINAL_CONFIG@#$(strip $(GRUB_TERMINAL_CONFIG))#g' \
+ -e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1)) $(BOOTOPTS) $(GRUB_CONSOLE_CMDLINE))#g' \
-e 's#(hd0,0)#(cd)#g' \
- $(KDIR)/root.grub/boot/grub/menu.lst
+ ./menu.lst > $(KDIR)/root.grub/boot/grub/menu.lst
$(CP) $(KDIR)/bzImage $(KDIR)/root.grub/boot/vmlinuz
mkisofs -R -b boot/grub/stage2_eltorito -no-emul-boot -boot-load-size 4 -boot-info-table \
-o $(KDIR)/root.iso $(KDIR)/root.grub
endef
define Image/BuildKernel
- $(CP) $(KDIR)/bzImage $(BIN_DIR)/openwrt-$(BOARD)-vmlinuz
+ $(CP) $(KDIR)/bzImage $(BIN_DIR)/$(IMG_PREFIX)-vmlinuz
endef
define Image/Build
$(call Image/Build/$(1))
+ $(call Image/Build/bootscript,$(1))
+ ifneq ($(1),iso)
$(call Image/Build/grub,$(1))
$(call Image/Build/vdi,$(1))
- $(CP) $(KDIR)/root.$(1) $(BIN_DIR)/openwrt-$(BOARD)-$(1).fs
- $(CP) $(KDIR)/bzImage $(BIN_DIR)/openwrt-$(BOARD)-vmlinuz
+ $(call Image/Build/vmdk,$(1))
+ endif
+ $(CP) $(KDIR)/root.$(1) $(BIN_DIR)/$(IMG_PREFIX)-$(1).fs
+ $(CP) $(KDIR)/bzImage $(BIN_DIR)/$(IMG_PREFIX)-vmlinuz
+ ifeq ($(1),ext2)
+ gzip -f9 $(BIN_DIR)/$(IMG_PREFIX)-$(1).image
+ endif
endef
$(eval $(call BuildImage))
ifeq ($(CONFIG_X86_VDI_IMAGES),y)
- $(eval $(call RequireCommand,vditool, \
- You need vditool to generate VirtualBox images. \
+ $(eval $(call RequireCommand,VBoxManage, \
+ You need VBoxManage to generate VirtualBox images. \
))
endif
+ifeq ($(CONFIG_X86_VMDK_IMAGES),y)
+ $(eval $(call RequireCommand,qemu-img, \
+ You need qemu-img to generate VMware images. \
+ ))
+endif
projects / openwrt.git / blobdiff