[rdc] 2.6.28: add flashmap and image support for the sitecom wl-176. Thanks Daniel...

[openwrt.git] / target / linux / rdc / image / Makefile

diff --git a/target/linux/rdc/image/Makefile b/target/linux/rdc/image/Makefile
index 4da96b7..6d38253 100644 (file)
--- a/target/linux/rdc/image/Makefile
+++ b/target/linux/rdc/image/Makefile
@@ -1,5 +1,5 @@
-# 
-# Copyright (C) 2006 OpenWrt.org
+#
+# Copyright (C) 2006-2009 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -21,39 +21,78 @@ define trxalign/squashfs
 bs=1024
 endef
 
+define Image/Prepare/squashfs
+       $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
+endef
+
 define Image/Build/ar525w
        touch $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).img
        touch $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2)-web.img
-       mv $(KDIR)/root.$(1) $(KDIR)/root.tmp
-       dd of=$(KDIR)/root.$(1) if=$(KDIR)/root.tmp $(call trxalign/$(1)) conv=sync
-       $(RM) $(KDIR)/root.tmp
+       dd if=$(KDIR)/root.$(1) of=$(KDIR)/root.tmp $(call trxalign/$(1)) conv=sync
+       mv $(KDIR)/root.tmp $(KDIR)/root.$(1)
        $(STAGING_DIR_HOST)/bin/airlink -b 1 -j $(shell bash -c 'echo $$[$(3)]') $(KDIR)/bzImage $(KDIR)/root.$(1) $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).img
        $(STAGING_DIR_HOST)/bin/airlink -e -b 1 -j $(shell bash -c 'echo $$[$(3)]') $(KDIR)/bzImage $(KDIR)/root.$(1) $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2)-web.img
 endef
 
+define Image/Prepare/wl153/squashfs
+       dd if=/dev/null of=$(KDIR)/root.tmp seek=1 bs=32k
+       echo -n "0123456789abcdef0123" >> $(KDIR)/root.tmp
+       cat $(KDIR)/bzImage $(KDIR)/root.squashfs >> $(KDIR)/root.tmp
+       dd if=$(KDIR)/root.tmp of=$(KDIR)/root2.tmp bs=64k conv=sync
+       dd if=$(KDIR)/root2.tmp of=$(KDIR)/root.squashfs bs=1 skip=$$$$[0x$$$$(cat $(KDIR)/bzSize) + 0x8014]
+       $(call add_jffs2_mark,$(KDIR)/root.squashfs)
+endef
+
 define Image/Build/wl153
        ls -l $(KDIR)/bzImage | sed -r 's/^[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+([^[:blank:]]+).+$$$$/\1/' | xargs printf '%.8x' > $(KDIR)/bzSize
-       gzip -9c $(KDIR)/root.$(1) > $(KDIR)/root.$(1).gz
-       ls -l $(KDIR)/root.$(1).gz | sed -r 's/^[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+([^[:blank:]]+).+$$$$/\1/' | xargs printf '%.8x' > $(KDIR)/rdSize
+       $(call Image/Prepare/wl153/$(1))
+       ls -l $(KDIR)/root.$(1) | sed -r 's/^[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+([^[:blank:]]+).+$$$$/\1/' | xargs printf '%.8x' > $(KDIR)/rdSize
        echo -ne "\x$$$$(cut -c 7,8 < $(KDIR)/bzSize)\x$$$$(cut -c 5,6 < $(KDIR)/bzSize)\x$$$$(cut -c 3,4 < $(KDIR)/bzSize)\x$$$$(cut -c 1,2 < $(KDIR)/bzSize)" > $(KDIR)/bzSize.tmp
        echo -n 'CSYS' > $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).img
        cat $(KDIR)/bzSize.tmp >> $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).img
        echo -ne "\x$$$$(cut -c 7,8 < $(KDIR)/rdSize)\x$$$$(cut -c 5,6 < $(KDIR)/rdSize)\x$$$$(cut -c 3,4 < $(KDIR)/rdSize)\x$$$$(cut -c 1,2 < $(KDIR)/rdSize)WRRM" >> $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).img
-       cat $(KDIR)/bzSize.tmp $(KDIR)/bzImage $(KDIR)/root.$(1).gz >> $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).img
+       cat $(KDIR)/bzSize.tmp $(KDIR)/bzImage $(KDIR)/root.$(1) >> $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).img
        $(RM) $(KDIR)/bzSize.tmp $(KDIR)/bzSize $(KDIR)/rdSize
+       if [ `ls -l $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).img | sed -r 's/^[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+([^[:blank:]]+).+$$$$/\1/'` -gt $$$$((0xffff0000-0xffe08000)) ]; then mv $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).img $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).img.too_big; echo "#ERR image too big"; fi 
 endef
 
 define Image/Build/dir450
        touch $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).img
+       dd if=$(KDIR)/root.$(1) of=$(KDIR)/root.tmp $(call trxalign/$(1)) conv=sync
+       mv $(KDIR)/root.tmp $(KDIR)/root.$(1)
+       $(CP) $(KDIR)/root.$(1) $(BIN_DIR)/onlyrootfs-$(BOARD)-$(1)-$(2).img
+endef
+
+define Image/Build/g570s
+       $(call Image/Prepare/$(1))
        mv $(KDIR)/root.$(1) $(KDIR)/root.tmp
        dd of=$(KDIR)/root.$(1) if=$(KDIR)/root.tmp $(call trxalign/$(1)) conv=sync
-       $(RM) $(KDIR)/root.tmp
-       cp $(KDIR)/root.$(1) $(BIN_DIR)/onlyrootfs-$(BOARD)-$(1)-$(2).img
+       $(CP) $(KDIR)/bzImage $(BIN_DIR)/openwrt-tftp-$(BOARD)-$(1)-$(2).img
+       dd of=$(BIN_DIR)/openwrt-tftp-$(BOARD)-$(1)-$(2).img if=/dev/null bs=1024 seek=1024
+       cat $(KDIR)/root.$(1) >> $(BIN_DIR)/openwrt-tftp-$(BOARD)-$(1)-$(2).img
+       if [ ! -x $(STAGING_DIR_HOST)/bin/zyxel_combine ]; then echo "#ERR Please copy the ZyXEL \"combine\" tool as $(STAGING_DIR_HOST)/bin/zyxel_combine to build."; fi
+       sh -c "mkdir $(KDIR)/zyxel.tmp && cd $(KDIR)/zyxel.tmp && mv ../root.tmp initrd.bin && cp ../bzImage kernel.bin && $(STAGING_DIR_HOST)/bin/zyxel_combine -mcf kernel.bin initrd.bin && mv image $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).rmt" || :
+       $(RM) -r $(KDIR)/zyxel.tmp
+endef
+
+define Image/Build/amit
+       $(call Image/Prepare/$(1))
+       if [ ! -x $(STAGING_DIR_HOST)/bin/amit_makebin ]; then echo "#ERR Please copy the AMIT \"makebin\" tool from http://mgb111.pradnik.net/ as $(STAGING_DIR_HOST)/bin/amit_makebin to build."; fi
+       sh -c "mkdir -p $(KDIR)/amit.tmp/linux_src/arch/i386/boot $(KDIR)/amit.tmp/rom_disk && cd $(KDIR)/amit.tmp && ln -s ../../root.$(1) rom_disk/fs.img && ln -s ../../../../../bzImage linux_src/arch/i386/boot && $(STAGING_DIR_HOST)/bin/amit_makebin && mv upgrade.img $(BIN_DIR)/openwrt-$(BOARD)-$(1)-anas350.bin" || :
+       $(RM) -r $(KDIR)/amit.tmp
+       $(STAGING_DIR_HOST)/bin/makeamitbin -o $(BIN_DIR)/openwrt-$(BOARD)-$(1)-ar360w3g.bin -1 ALK_ATG001 -2 Atropos linux3g $(KDIR)/bzImage ramdisk3g $(KDIR)/root.$(1)
+endef
+
+define Image/Build/Initramfs
+       $(CP) $(KDIR)/bzImage $(BIN_DIR)/openwrt-$(BOARD)-ramfs.bzImage
 endef
 
 define Image/Build
        $(CP) $(KDIR)/bzImage $(BIN_DIR)/openwrt-$(BOARD).bzImage
        $(call Image/Build/$(PROFILE),$(1),$(PROFILE),$(patsubst jffs2-%k,%,$(1)))
+ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
+       $(call Image/Build/Initramfs)
+endif
 endef
 
 $(eval $(call BuildImage))