--- a/config.mk
+++ b/config.mk
-@@ -107,10 +107,10 @@ CONFIG_MAC80211_MESH=y
- CONFIG_CFG80211=m
+@@ -153,77 +153,77 @@ CONFIG_CFG80211_DEFAULT_PS=y
+ CONFIG_CFG80211_DEFAULT_PS_VALUE=1
# CONFIG_CFG80211_REG_DEBUG=y
-CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG=y
CONFIG_WIRELESS_OLD_REGULATORY=n
-@@ -127,56 +127,56 @@ CONFIG_ATH9K=m
+
+ # mac80211 test driver
+-CONFIG_MAC80211_HWSIM=m
++# CONFIG_MAC80211_HWSIM=m
+
+ # PCI Drivers
+ ifneq ($(CONFIG_PCI),)
+
+-CONFIG_ATH5K=m
++# CONFIG_ATH5K=m
+ # CONFIG_ATH5K_DEBUG=y
+-CONFIG_ATH5K_RFKILL=y
+-CONFIG_ATH9K=m
++# CONFIG_ATH5K_RFKILL=y
++# CONFIG_ATH9K=m
# CONFIG_ATH9K_DEBUG=y
-CONFIG_IWLWIFI=m
-CONFIG_IWLWIFI_LEDS=y
+-CONFIG_IWLWIFI_RFKILL=y
+-CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y
+# CONFIG_IWLWIFI=m
+# CONFIG_IWLWIFI_LEDS=y
- # CONFIG_IWLWIFI_RFKILL=y
--CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y
++# CONFIG_IWLWIFI_RFKILL=y
+# CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y
# CONFIG_IWLWIFI_DEBUG=y
# CONFIG_IWLWIFI_DEBUGFS=y
-CONFIG_IWLAGN=m
--CONFIG_IWL4965=y
+-CONFIG_COMPAT_IWL4965=y
-CONFIG_IWL5000=y
-CONFIG_IWL3945=m
-CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
+# CONFIG_IWLAGN=m
-+# CONFIG_IWL4965=y
++# CONFIG_COMPAT_IWL4965=y
+# CONFIG_IWL5000=y
+# CONFIG_IWL3945=m
+# CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
-CONFIG_B43_PCMCIA=y
-CONFIG_B43_PIO=y
-CONFIG_B43_LEDS=y
+-CONFIG_B43_RFKILL=y
+# CONFIG_B43=m
+# CONFIG_B43_HWRNG=y
+# CONFIG_B43_PCI_AUTOSELECT=y
+# CONFIG_B43_PCMCIA=y
+# CONFIG_B43_PIO=y
+# CONFIG_B43_LEDS=y
- # CONFIG_B43_RFKILL=y
++# CONFIG_B43_RFKILL=y
# CONFIG_B43_DEBUG=y
# CONFIG_B43_FORCE_PIO=y
-CONFIG_B43LEGACY_PCI_AUTOSELECT=y
-CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
-CONFIG_B43LEGACY_LEDS=y
+-CONFIG_B43LEGACY_RFKILL=y
+# CONFIG_B43LEGACY=m
+# CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+# CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+# CONFIG_B43LEGACY_LEDS=y
- # CONFIG_B43LEGACY_RFKILL=y
++# CONFIG_B43LEGACY_RFKILL=y
# CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
-CONFIG_B43LEGACY_PIO=y
# CONFIG_IPW2200_DEBUG=y
# The above enables use a second interface prefixed 'rtap'.
# Example usage:
-@@ -191,27 +191,27 @@ CONFIG_IPW2200_QOS=y
+@@ -238,46 +238,46 @@ CONFIG_IPW2200_QOS=y
#
# % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface
+# CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+# CONFIG_SSB_DRIVER_PCICORE=y
- CONFIG_P54_PCI=m
+-CONFIG_P54_PCI=m
++# CONFIG_P54_PCI=m
-CONFIG_B44=m
-CONFIG_B44_PCI_AUTOSELECT=y
+# CONFIG_ADM8211=m
+# CONFIG_PCMCIA_ATMEL=m
- CONFIG_RT2X00_LIB_PCI=m
- CONFIG_RT2400PCI=m
-@@ -227,24 +227,24 @@ CONFIG_RT61PCI=m
+-CONFIG_RT2X00_LIB_PCI=m
+-CONFIG_RT2400PCI=m
+-CONFIG_RT2500PCI=m
+-CONFIG_RT2800PCI=m
++# CONFIG_RT2X00_LIB_PCI=m
++# CONFIG_RT2400PCI=m
++# CONFIG_RT2500PCI=m
++# CONFIG_RT2800PCI=m
+ NEED_RT2X00=y
+
+ # Two rt2x00 drivers require firmware: rt61pci and rt73usb. They depend on
+ # CRC to check the firmware. We check here first for the PCI
+ # driver as we're in the PCI section.
+ ifneq ($(CONFIG_CRC_ITU_T),)
+-CONFIG_RT61PCI=m
++# CONFIG_RT61PCI=m
NEED_RT2X00_FIRMWARE=y
endif
endif
## end of PCI
-
+@@ -285,22 +285,22 @@ endif
ifneq ($(CONFIG_PCMCIA),)
+ ifeq ($(shell test $(KERNEL_SUBLEVEL) -le 26 && echo yes),yes)
+-CONFIG_LIBERTAS=n
+-CONFIG_LIBERTAS_CS=n
++# CONFIG_LIBERTAS=n
++# CONFIG_LIBERTAS_CS=n
+ else
-CONFIG_LIBERTAS_CS=m
-NEED_LIBERTAS=y
+# CONFIG_LIBERTAS_CS=m
+# NEED_LIBERTAS=y
+ endif
endif
## end of PCMCIA
# USB Drivers
ifneq ($(CONFIG_USB),)
-@@ -258,21 +258,21 @@ CONFIG_ZD1211RW=m
+-CONFIG_ZD1211RW=m
++# CONFIG_ZD1211RW=m
+ # CONFIG_ZD1211RW_DEBUG=y
+
+ # Sorry, rndis_wlan uses cancel_work_sync which is new and can't be done in compat...
+@@ -310,55 +310,55 @@ CONFIG_ZD1211RW=m
# is only wireless RNDIS chip known to date.
# Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER
# it also requires new RNDIS_HOST and CDC_ETHER modules which we add
+# CONFIG_USB_NET_CDCETHER=m
- CONFIG_P54_USB=m
+-CONFIG_P54_USB=m
-CONFIG_RTL8187=m
++# CONFIG_P54_USB=m
+# CONFIG_RTL8187=m
-CONFIG_AT76C50X_USB=m
+# CONFIG_AT76C50X_USB=m
- # Activate AR9170 support only on kernel >= 2.6.29.
- # The needed USB poison feature was added in this kernel release.
- ifeq ($(shell test $(KERNEL_SUBLEVEL) -ge 29 && echo yes),yes)
+ ifeq ($(shell test $(KERNEL_SUBLEVEL) -ge 28 && echo yes),yes)
-CONFIG_AR9170_USB=m
-CONFIG_AR9170_LEDS=y
+# CONFIG_AR9170_USB=m
endif
# RT2500USB does not require firmware
-@@ -286,24 +286,24 @@ CONFIG_RT73USB=m
+-CONFIG_RT2500USB=m
+-CONFIG_RT2800USB=m
+-CONFIG_RT2X00_LIB_USB=m
++# CONFIG_RT2500USB=m
++# CONFIG_RT2800USB=m
++# CONFIG_RT2X00_LIB_USB=m
+ NEED_RT2X00=y
+ # RT73USB requires firmware
+ ifneq ($(CONFIG_CRC_ITU_T),)
+-CONFIG_RT73USB=m
++# CONFIG_RT73USB=m
NEED_RT2X00_FIRMWARE=y
endif
+ ifeq ($(shell test $(KERNEL_SUBLEVEL) -le 26 && echo yes),yes)
+-CONFIG_LIBERTAS_THINFIRM_USB=n
+-CONFIG_LIBERTAS_USB=n
+-NEED_LIBERTAS=n
++# CONFIG_LIBERTAS_THINFIRM_USB=n
++# CONFIG_LIBERTAS_USB=n
++# NEED_LIBERTAS=n
+ else
-CONFIG_LIBERTAS_THINFIRM_USB=m
-CONFIG_LIBERTAS_USB=m
-NEED_LIBERTAS=y
+# CONFIG_LIBERTAS_THINFIRM_USB=m
+# CONFIG_LIBERTAS_USB=m
+# NEED_LIBERTAS=y
+ endif
endif # end of USB driver list
ifneq ($(CONFIG_SPI_MASTER),)
--CONFIG_WL12XX=m
+-CONFIG_WL1251=m
+-CONFIG_P54_SPI=m
++# CONFIG_WL1251=m
++# CONFIG_P54_SPI=m
+
+ ifeq ($(shell test $(KERNEL_SUBLEVEL) -le 26 && echo yes),yes)
+-CONFIG_LIBERTAS_SPI=n
+-NEED_LIBERTAS=n
++# CONFIG_LIBERTAS_SPI=n
++# NEED_LIBERTAS=n
+ else
-CONFIG_LIBERTAS_SPI=m
-NEED_LIBERTAS=y
-+# CONFIG_WL12XX=m
+# CONFIG_LIBERTAS_SPI=m
+# NEED_LIBERTAS=y
+ endif
endif # end of SPI driver list
-
+@@ -366,17 +366,17 @@ endif # end of SPI driver list
ifneq ($(CONFIG_MMC),)
+ ifeq ($(shell test $(KERNEL_SUBLEVEL) -le 26 && echo yes),yes)
+-CONFIG_LIBERTAS_SDIO=n
+-NEED_LIBERTAS=n
++# CONFIG_LIBERTAS_SDIO=n
++# NEED_LIBERTAS=n
+ else
-CONFIG_LIBERTAS_SDIO=m
-NEED_LIBERTAS=y
+# CONFIG_LIBERTAS_SDIO=m
+# NEED_LIBERTAS=y
+ endif
- endif # end of SDIO driver list
+ # Activate iwmc3200wifi support only on kernel >= 2.6.29.
+ # iwmc3200wifi uses new netdev_ops api no supported by old kernel.
+ ifeq ($(shell test $(KERNEL_SUBLEVEL) -ge 29 && echo yes),yes)
+-CONFIG_IWM=m
++# CONFIG_IWM=m
+ # CONFIG_IWM_DEBUG=y
+ endif
-@@ -333,13 +333,13 @@ CONFIG_ATH_COMMON=m
+@@ -384,12 +384,12 @@ endif # end of SDIO driver list
+
+ # Common rt2x00 requirements
+ ifeq ($(NEED_RT2X00),y)
+-CONFIG_RT2X00=m
++# CONFIG_RT2X00=m
+ CONFIG_RT2X00_LIB=m
+ CONFIG_RT2X00_LIB_HT=y
+ CONFIG_RT2X00_LIB_FIRMWARE=y
+ CONFIG_RT2X00_LIB_CRYPTO=y
+-CONFIG_RT2X00_LIB_RFKILL=y
++# CONFIG_RT2X00_LIB_RFKILL=y
+ CONFIG_RT2X00_LIB_LEDS=y
+ # CONFIG_RT2X00_LIB_DEBUGFS=y
+ # CONFIG_RT2X00_DEBUG=y
+@@ -400,30 +400,30 @@ CONFIG_RT2X00_LIB_FIRMWARE=y
+ endif
+ # p54
+-CONFIG_P54_COMMON=m
++# CONFIG_P54_COMMON=m
+ CONFIG_P54_LEDS=y
+
+ # Atheros
+-CONFIG_ATH_COMMON=m
++# CONFIG_ATH_COMMON=m
+
+-CONFIG_WL12XX=y
+-CONFIG_WL1251=m
+-CONFIG_WL1251_SPI=m
+-CONFIG_WL1251_SDIO=m
+-CONFIG_WL1271=m
++# CONFIG_WL12XX=y
++# CONFIG_WL1251=m
++# CONFIG_WL1251_SPI=m
++# CONFIG_WL1251_SDIO=m
++# CONFIG_WL1271=m
# Sonics Silicon Backplane
-CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB_SPROM=y
# CONFIG_SSB_DEBUG=y
+ ifeq ($(shell test $(KERNEL_SUBLEVEL) -le 26 && echo yes),yes)
+-CONFIG_LIBERTAS=n
++# CONFIG_LIBERTAS=n
+ else
ifeq ($(NEED_LIBERTAS),y)
-CONFIG_LIBERTAS_THINFIRM=m
+-CONFIG_LIBERTAS=m
+# CONFIG_LIBERTAS_THINFIRM=m
- CONFIG_LIBERTAS=m
++# CONFIG_LIBERTAS=m
# CONFIG_LIBERTAS_DEBUG=y
endif
+ endif
+@@ -431,8 +431,8 @@ endif
+ # We need the backported rfkill module on kernel < 2.6.31.
+ # In more recent kernel versions use the in kernel rfkill module.
+ ifeq ($(shell test $(KERNEL_SUBLEVEL) -le 30 && echo yes),yes)
+-CONFIG_RFKILL_BACKPORT=m
+-CONFIG_RFKILL_BACKPORT_LEDS=y
+-CONFIG_RFKILL_BACKPORT_INPUT=y
++# CONFIG_RFKILL_BACKPORT=m
++# CONFIG_RFKILL_BACKPORT_LEDS=y
++# CONFIG_RFKILL_BACKPORT_INPUT=y
+ endif
+