ramips: rt3883: change eeprom file name

[openwrt.git] / target / linux / ramips / files / arch / mips / ralink / rt305x / mach-whr-g300n.c

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-whr-g300n.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-whr-g300n.c
index 4e0e810..fdcd6b3 100644 (file)
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-whr-g300n.c
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-whr-g300n.c
@@ -31,9 +31,9 @@
 #define WHR_G300N_GPIO_BUTTON_ROUTER_ON                8       /* active low */
 #define WHR_G300N_GPIO_BUTTON_ROUTER_OFF       11      /* active low */
 
-#define WHR_G300N_BUTTONS_POLL_INTERVAL                20
+#define WHR_G300N_KEYS_POLL_INTERVAL           20
+#define WHR_G300N_KEYS_DEBOUNCE_INTERVAL       (3 * WHR_G300N_KEYS_POLL_INTERVAL)
 
-#ifdef CONFIG_MTD_PARTITIONS
 static struct mtd_partition whr_g300n_partitions[] = {
        {
                .name   = "u-boot",
@@ -63,19 +63,11 @@ static struct mtd_partition whr_g300n_partitions[] = {
                .offset = 0x3f0000,
                .size   = 0x010000,
        }, {
-               .name   = "openwrt",
+               .name   = "firmware",
                .offset = 0x050000,
                .size   = 0x3a0000,
        }
 };
-#endif /* CONFIG_MTD_PARTITIONS */
-
-static struct physmap_flash_data whr_g300n_flash_data = {
-#ifdef CONFIG_MTD_PARTITIONS
-       .nr_parts       = ARRAY_SIZE(whr_g300n_partitions),
-       .parts          = whr_g300n_partitions,
-#endif
-};
 
 static struct gpio_led whr_g300n_leds_gpio[] __initdata = {
        {
@@ -93,33 +85,33 @@ static struct gpio_led whr_g300n_leds_gpio[] __initdata = {
        }
 };
 
-static struct gpio_button whr_g300n_gpio_buttons[] __initdata = {
+static struct gpio_keys_button whr_g300n_gpio_buttons[] __initdata = {
        {
                .desc           = "reset",
                .type           = EV_KEY,
-               .code           = BTN_0,
-               .threshold      = 3,
+               .code           = KEY_RESTART,
+               .debounce_interval = WHR_G300N_KEYS_DEBOUNCE_INTERVAL,
                .gpio           = WHR_G300N_GPIO_BUTTON_RESET,
                .active_low     = 1,
        }, {
                .desc           = "aoss",
                .type           = EV_KEY,
-               .code           = BTN_1,
-               .threshold      = 3,
+               .code           = KEY_WPS_BUTTON,
+               .debounce_interval = WHR_G300N_KEYS_DEBOUNCE_INTERVAL,
                .gpio           = WHR_G300N_GPIO_BUTTON_AOSS,
                .active_low     = 1,
        }, {
                .desc           = "router-off",
                .type           = EV_KEY,
                .code           = BTN_2,
-               .threshold      = 3,
+               .debounce_interval = WHR_G300N_KEYS_DEBOUNCE_INTERVAL,
                .gpio           = WHR_G300N_GPIO_BUTTON_ROUTER_OFF,
                .active_low     = 1,
        }, {
                .desc           = "router-on",
                .type           = EV_KEY,
                .code           = BTN_3,
-               .threshold      = 3,
+               .debounce_interval = WHR_G300N_KEYS_DEBOUNCE_INTERVAL,
                .gpio           = WHR_G300N_GPIO_BUTTON_ROUTER_ON,
                .active_low     = 1,
        }
@@ -129,14 +121,19 @@ static void __init whr_g300n_init(void)
 {
        rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
 
-       rt305x_register_flash(0, &whr_g300n_flash_data);
+       rt305x_flash0_data.nr_parts = ARRAY_SIZE(whr_g300n_partitions);
+       rt305x_flash0_data.parts = whr_g300n_partitions;
+       rt305x_register_flash(0);
+
+       rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
        rt305x_register_ethernet();
        ramips_register_gpio_leds(-1, ARRAY_SIZE(whr_g300n_leds_gpio),
                                  whr_g300n_leds_gpio);
-       ramips_register_gpio_buttons(-1, WHR_G300N_BUTTONS_POLL_INTERVAL,
+       ramips_register_gpio_buttons(-1, WHR_G300N_KEYS_POLL_INTERVAL,
                                     ARRAY_SIZE(whr_g300n_gpio_buttons),
                                     whr_g300n_gpio_buttons);
        rt305x_register_wifi();
+       rt305x_register_wdt();
 }
 
 MIPS_MACHINE(RAMIPS_MACH_WHR_G300N, "WHR-G300N", "Buffalo WHR-G300N",