ramips: rt288x: add support for the Belkin F5D8235-4 v1 board

[openwrt.git] / target / linux / ramips / files / arch / mips / ralink / rt305x / mach-whr-g300n.c

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-whr-g300n.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-whr-g300n.c
index 4e0e810..49ab0fd 100644 (file)
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-whr-g300n.c
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-whr-g300n.c
@@ -63,7 +63,7 @@ static struct mtd_partition whr_g300n_partitions[] = {
                .offset = 0x3f0000,
                .size   = 0x010000,
        }, {
-               .name   = "openwrt",
+               .name   = "firmware",
                .offset = 0x050000,
                .size   = 0x3a0000,
        }
@@ -97,14 +97,14 @@ static struct gpio_button whr_g300n_gpio_buttons[] __initdata = {
        {
                .desc           = "reset",
                .type           = EV_KEY,
-               .code           = BTN_0,
+               .code           = KEY_RESTART,
                .threshold      = 3,
                .gpio           = WHR_G300N_GPIO_BUTTON_RESET,
                .active_low     = 1,
        }, {
                .desc           = "aoss",
                .type           = EV_KEY,
-               .code           = BTN_1,
+               .code           = KEY_WPS_BUTTON,
                .threshold      = 3,
                .gpio           = WHR_G300N_GPIO_BUTTON_AOSS,
                .active_low     = 1,
@@ -130,6 +130,7 @@ static void __init whr_g300n_init(void)
        rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
 
        rt305x_register_flash(0, &whr_g300n_flash_data);
+       rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
        rt305x_register_ethernet();
        ramips_register_gpio_leds(-1, ARRAY_SIZE(whr_g300n_leds_gpio),
                                  whr_g300n_leds_gpio);
@@ -137,6 +138,7 @@ static void __init whr_g300n_init(void)
                                     ARRAY_SIZE(whr_g300n_gpio_buttons),
                                     whr_g300n_gpio_buttons);
        rt305x_register_wifi();
+       rt305x_register_wdt();
 }
 
 MIPS_MACHINE(RAMIPS_MACH_WHR_G300N, "WHR-G300N", "Buffalo WHR-G300N",