+--- a/drivers/ssb/Kconfig
++++ b/drivers/ssb/Kconfig
+@@ -66,6 +66,20 @@ config SSB_PCMCIAHOST
+
+ If unsure, say N
+
++config SSB_SDIOHOST_POSSIBLE
++ bool
++ depends on SSB && (MMC = y || MMC = SSB)
++ default y
++
++config SSB_SDIOHOST
++ bool "Support for SSB on SDIO-bus host"
++ depends on SSB_SDIOHOST_POSSIBLE
++ help
++ Support for a Sonics Silicon Backplane on top
++ of a SDIO device.
++
++ If unsure, say N
++
+ config SSB_SILENT
+ bool "No SSB kernel messages"
+ depends on SSB && EMBEDDED
+--- a/drivers/ssb/Makefile
++++ b/drivers/ssb/Makefile
+@@ -6,6 +6,7 @@ ssb-$(CONFIG_SSB_SPROM) += sprom.o
+ # host support
+ ssb-$(CONFIG_SSB_PCIHOST) += pci.o pcihost_wrapper.o
+ ssb-$(CONFIG_SSB_PCMCIAHOST) += pcmcia.o
++ssb-$(CONFIG_SSB_SDIOHOST) += sdio.o
+
+ # built-in drivers
+ ssb-y += driver_chipcommon.o
+--- a/drivers/ssb/b43_pci_bridge.c
++++ b/drivers/ssb/b43_pci_bridge.c
+@@ -5,12 +5,13 @@
+ * because of its small size we include it in the SSB core
+ * instead of creating a standalone module.
+ *
+- * Copyright 2007 Michael Buesch <mb@bu3sch.de>
++ * Copyright 2007 Michael Buesch <m@bues.ch>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+ #include <linux/pci.h>
++#include <linux/module.h>
+ #include <linux/ssb/ssb.h>
+
+ #include "ssb_private.h"
+@@ -24,6 +25,7 @@ static const struct pci_device_id b43_pc
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4312) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4315) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4318) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BCM_GVC, 0x4318) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) },
+--- a/drivers/ssb/driver_chipcommon.c
++++ b/drivers/ssb/driver_chipcommon.c
+@@ -3,7 +3,7 @@
+ * Broadcom ChipCommon core driver
+ *
+ * Copyright 2005, Broadcom Corporation
+- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+@@ -46,40 +46,66 @@ void ssb_chipco_set_clockmode(struct ssb
+ if (!ccdev)
+ return;
+ bus = ccdev->bus;
++
++ /* We support SLOW only on 6..9 */
++ if (ccdev->id.revision >= 10 && mode == SSB_CLKMODE_SLOW)
++ mode = SSB_CLKMODE_DYNAMIC;
++
++ if (cc->capabilities & SSB_CHIPCO_CAP_PMU)
++ return; /* PMU controls clockmode, separated function needed */
++ SSB_WARN_ON(ccdev->id.revision >= 20);
++
+ /* chipcommon cores prior to rev6 don't support dynamic clock control */
+ if (ccdev->id.revision < 6)
+ return;
+- /* chipcommon cores rev10 are a whole new ball game */
++
++ /* ChipCommon cores rev10+ need testing */
+ if (ccdev->id.revision >= 10)
+ return;
++
+ if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
+ return;
+
+ switch (mode) {
+- case SSB_CLKMODE_SLOW:
++ case SSB_CLKMODE_SLOW: /* For revs 6..9 only */
+ tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
+ tmp |= SSB_CHIPCO_SLOWCLKCTL_FSLOW;
+ chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
+ break;
+ case SSB_CLKMODE_FAST:
+- ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */
+- tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
+- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
+- tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL;
+- chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
++ if (ccdev->id.revision < 10) {
++ ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */
++ tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
++ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
++ tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL;
++ chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
++ } else {
++ chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL,
++ (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) |
++ SSB_CHIPCO_SYSCLKCTL_FORCEHT));
++ /* udelay(150); TODO: not available in early init */
++ }
+ break;
+ case SSB_CLKMODE_DYNAMIC:
+- tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
+- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
+- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL;
+- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
+- if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) != SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL)
+- tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
+- chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
+-
+- /* for dynamic control, we have to release our xtal_pu "force on" */
+- if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL)
+- ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0);
++ if (ccdev->id.revision < 10) {
++ tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
++ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
++ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL;
++ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
++ if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) !=
++ SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL)
++ tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
++ chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
++
++ /* For dynamic control, we have to release our xtal_pu
++ * "force on" */
++ if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL)
++ ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0);
++ } else {
++ chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL,
++ (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) &
++ ~SSB_CHIPCO_SYSCLKCTL_FORCEHT));
++ }
+ break;
+ default:
+ SSB_WARN_ON(1);
+@@ -209,6 +235,24 @@ static void chipco_powercontrol_init(str
+ }
+ }
+
++/* http://bcm-v4.sipsolutions.net/802.11/PmuFastPwrupDelay */
++static u16 pmu_fast_powerup_delay(struct ssb_chipcommon *cc)
++{
++ struct ssb_bus *bus = cc->dev->bus;
++
++ switch (bus->chip_id) {
++ case 0x4312:
++ case 0x4322:
++ case 0x4328:
++ return 7000;
++ case 0x4325:
++ /* TODO: */
++ default:
++ return 15000;
++ }
++}
++
++/* http://bcm-v4.sipsolutions.net/802.11/ClkctlFastPwrupDelay */
+ static void calc_fast_powerup_delay(struct ssb_chipcommon *cc)
+ {
+ struct ssb_bus *bus = cc->dev->bus;
+@@ -218,6 +262,12 @@ static void calc_fast_powerup_delay(stru
+
+ if (bus->bustype != SSB_BUSTYPE_PCI)
+ return;
++
++ if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
++ cc->fast_pwrup_delay = pmu_fast_powerup_delay(cc);
++ return;
++ }
++
+ if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
+ return;
+
+@@ -233,6 +283,15 @@ void ssb_chipcommon_init(struct ssb_chip
+ {
+ if (!cc->dev)
+ return; /* We don't have a ChipCommon */
++ if (cc->dev->id.revision >= 11)
++ cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
++ ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
++
++ if (cc->dev->id.revision >= 20) {
++ chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0);
++ chipco_write32(cc, SSB_CHIPCO_GPIOPULLDOWN, 0);
++ }
++
+ ssb_pmu_init(cc);
+ chipco_powercontrol_init(cc);
+ ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
+@@ -370,6 +429,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c
+ {
+ return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
+ }
++EXPORT_SYMBOL(ssb_chipco_gpio_control);
+
+ u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
+ {
--- a/drivers/ssb/driver_chipcommon_pmu.c
+++ b/drivers/ssb/driver_chipcommon_pmu.c
-@@ -28,6 +28,21 @@ static void ssb_chipco_pll_write(struct
+@@ -2,7 +2,7 @@
+ * Sonics Silicon Backplane
+ * Broadcom ChipCommon Power Management Unit driver
+ *
+- * Copyright 2009, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2009, Michael Buesch <m@bues.ch>
+ * Copyright 2007, Broadcom Corporation
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+@@ -28,6 +28,21 @@ static void ssb_chipco_pll_write(struct
chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value);
}
struct pmu0_plltab_entry {
u16 freq; /* Crystal frequency in kHz.*/
u8 xf; /* Crystal frequency value for PMU control */
-@@ -506,3 +521,82 @@ void ssb_pmu_init(struct ssb_chipcommon
+@@ -317,6 +332,12 @@ static void ssb_pmu_pll_init(struct ssb_
+ case 0x5354:
+ ssb_pmu0_pllinit_r0(cc, crystalfreq);
+ break;
++ case 0x4322:
++ if (cc->pmu.rev == 2) {
++ chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, 0x0000000A);
++ chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, 0x380005C0);
++ }
++ break;
+ default:
+ ssb_printk(KERN_ERR PFX
+ "ERROR: PLL init unknown for device %04X\n",
+@@ -396,12 +417,15 @@ static void ssb_pmu_resources_init(struc
+ u32 min_msk = 0, max_msk = 0;
+ unsigned int i;
+ const struct pmu_res_updown_tab_entry *updown_tab = NULL;
+- unsigned int updown_tab_size;
++ unsigned int updown_tab_size = 0;
+ const struct pmu_res_depend_tab_entry *depend_tab = NULL;
+- unsigned int depend_tab_size;
++ unsigned int depend_tab_size = 0;
+
+ switch (bus->chip_id) {
+ case 0x4312:
++ min_msk = 0xCBB;
++ break;
++ case 0x4322:
+ /* We keep the default settings:
+ * min_msk = 0xCBB
+ * max_msk = 0x7FFFF
+@@ -480,9 +504,9 @@ static void ssb_pmu_resources_init(struc
+ chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk);
+ }
+
++/* http://bcm-v4.sipsolutions.net/802.11/SSB/PmuInit */
+ void ssb_pmu_init(struct ssb_chipcommon *cc)
+ {
+- struct ssb_bus *bus = cc->dev->bus;
+ u32 pmucap;
+
+ if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU))
+@@ -494,15 +518,91 @@ void ssb_pmu_init(struct ssb_chipcommon
+ ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
+ cc->pmu.rev, pmucap);
+
+- if (cc->pmu.rev >= 1) {
+- if ((bus->chip_id == 0x4325) && (bus->chip_rev < 2)) {
+- chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
+- ~SSB_CHIPCO_PMU_CTL_NOILPONW);
+- } else {
+- chipco_set32(cc, SSB_CHIPCO_PMU_CTL,
+- SSB_CHIPCO_PMU_CTL_NOILPONW);
+- }
+- }
++ if (cc->pmu.rev == 1)
++ chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
++ ~SSB_CHIPCO_PMU_CTL_NOILPONW);
++ else
++ chipco_set32(cc, SSB_CHIPCO_PMU_CTL,
++ SSB_CHIPCO_PMU_CTL_NOILPONW);
ssb_pmu_pll_init(cc);
ssb_pmu_resources_init(cc);
}
+ return;
+ }
+
-+ ssb_chipco_regctl_maskset(cc, addr, ~(mask << shift),
-+ (voltage & mask) << shift);
++ ssb_chipco_regctl_maskset(cc, addr, ~(mask << shift),
++ (voltage & mask) << shift);
++}
++
++void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on)
++{
++ struct ssb_bus *bus = cc->dev->bus;
++ int ldo;
++
++ switch (bus->chip_id) {
++ case 0x4312:
++ ldo = SSB_PMURES_4312_PA_REF_LDO;
++ break;
++ case 0x4328:
++ ldo = SSB_PMURES_4328_PA_REF_LDO;
++ break;
++ case 0x5354:
++ ldo = SSB_PMURES_5354_PA_REF_LDO;
++ break;
++ default:
++ return;
++ }
++
++ if (on)
++ chipco_set32(cc, SSB_CHIPCO_PMU_MINRES_MSK, 1 << ldo);
++ else
++ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, ~(1 << ldo));
++ chipco_read32(cc, SSB_CHIPCO_PMU_MINRES_MSK); //SPEC FIXME found via mmiotrace - dummy read?
++}
++
++EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage);
++EXPORT_SYMBOL(ssb_pmu_set_ldo_paref);
+--- a/drivers/ssb/driver_gige.c
++++ b/drivers/ssb/driver_gige.c
+@@ -3,7 +3,7 @@
+ * Broadcom Gigabit Ethernet core driver
+ *
+ * Copyright 2008, Broadcom Corporation
+- * Copyright 2008, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2008, Michael Buesch <m@bues.ch>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+@@ -12,6 +12,7 @@
+ #include <linux/ssb/ssb_driver_gige.h>
+ #include <linux/pci.h>
+ #include <linux/pci_regs.h>
++#include <linux/slab.h>
+
+
+ /*
+@@ -105,8 +106,9 @@ void gige_pcicfg_write32(struct ssb_gige
+ gige_write32(dev, SSB_GIGE_PCICFG + offset, value);
+ }
+
+-static int ssb_gige_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+- int reg, int size, u32 *val)
++static int __devinit ssb_gige_pci_read_config(struct pci_bus *bus,
++ unsigned int devfn, int reg,
++ int size, u32 *val)
+ {
+ struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops);
+ unsigned long flags;
+@@ -135,8 +137,9 @@ static int ssb_gige_pci_read_config(stru
+ return PCIBIOS_SUCCESSFUL;
+ }
+
+-static int ssb_gige_pci_write_config(struct pci_bus *bus, unsigned int devfn,
+- int reg, int size, u32 val)
++static int __devinit ssb_gige_pci_write_config(struct pci_bus *bus,
++ unsigned int devfn, int reg,
++ int size, u32 val)
+ {
+ struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops);
+ unsigned long flags;
+@@ -165,7 +168,8 @@ static int ssb_gige_pci_write_config(str
+ return PCIBIOS_SUCCESSFUL;
+ }
+
+-static int ssb_gige_probe(struct ssb_device *sdev, const struct ssb_device_id *id)
++static int __devinit ssb_gige_probe(struct ssb_device *sdev,
++ const struct ssb_device_id *id)
+ {
+ struct ssb_gige *dev;
+ u32 base, tmslow, tmshigh;
+--- a/drivers/ssb/driver_mipscore.c
++++ b/drivers/ssb/driver_mipscore.c
+@@ -3,7 +3,7 @@
+ * Broadcom MIPS core driver
+ *
+ * Copyright 2005, Broadcom Corporation
+- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+@@ -270,7 +270,6 @@ void ssb_mipscore_init(struct ssb_mipsco
+ set_irq(dev, irq++);
+ }
+ break;
+- /* fallthrough */
+ case SSB_DEV_PCI:
+ case SSB_DEV_ETHERNET:
+ case SSB_DEV_ETHERNET_GBIT:
+@@ -281,6 +280,10 @@ void ssb_mipscore_init(struct ssb_mipsco
+ set_irq(dev, irq++);
+ break;
+ }
++ /* fallthrough */
++ case SSB_DEV_EXTIF:
++ set_irq(dev, 0);
++ break;
+ }
+ }
+ ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n");
+--- a/drivers/ssb/driver_pcicore.c
++++ b/drivers/ssb/driver_pcicore.c
+@@ -3,7 +3,7 @@
+ * Broadcom PCI-core driver
+ *
+ * Copyright 2005, Broadcom Corporation
+- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+@@ -15,6 +15,11 @@
+
+ #include "ssb_private.h"
+
++static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address);
++static void ssb_pcie_write(struct ssb_pcicore *pc, u32 address, u32 data);
++static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address);
++static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
++ u8 address, u16 data);
+
+ static inline
+ u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset)
+@@ -246,20 +251,12 @@ static struct pci_controller ssb_pcicore
+ .pci_ops = &ssb_pcicore_pciops,
+ .io_resource = &ssb_pcicore_io_resource,
+ .mem_resource = &ssb_pcicore_mem_resource,
+- .mem_offset = 0x24000000,
+ };
+
+-static u32 ssb_pcicore_pcibus_iobase = 0x100;
+-static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA;
+-
+ /* This function is called when doing a pci_enable_device().
+ * We must first check if the device is a device on the PCI-core bridge. */
+ int ssb_pcicore_plat_dev_init(struct pci_dev *d)
+ {
+- struct resource *res;
+- int pos, size;
+- u32 *base;
+-
+ if (d->bus->ops != &ssb_pcicore_pciops) {
+ /* This is not a device on the PCI-core bridge. */
+ return -ENODEV;
+@@ -268,27 +265,6 @@ int ssb_pcicore_plat_dev_init(struct pci
+ ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
+ pci_name(d));
+
+- /* Fix up resource bases */
+- for (pos = 0; pos < 6; pos++) {
+- res = &d->resource[pos];
+- if (res->flags & IORESOURCE_IO)
+- base = &ssb_pcicore_pcibus_iobase;
+- else
+- base = &ssb_pcicore_pcibus_membase;
+- res->flags |= IORESOURCE_PCI_FIXED;
+- if (res->end) {
+- size = res->end - res->start + 1;
+- if (*base & (size - 1))
+- *base = (*base + size) & ~(size - 1);
+- res->start = *base;
+- res->end = res->start + size - 1;
+- *base += size;
+- pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
+- }
+- /* Fix up PCI bridge BAR0 only */
+- if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0)
+- break;
+- }
+ /* Fix up interrupt lines */
+ d->irq = ssb_mips_irq(extpci_core->dev) + 2;
+ pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
+@@ -338,7 +314,7 @@ int ssb_pcicore_pcibios_map_irq(const st
+ return ssb_mips_irq(extpci_core->dev) + 2;
+ }
+
+-static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
++static void __devinit ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
+ {
+ u32 val;
+
+@@ -403,7 +379,7 @@ static void ssb_pcicore_init_hostmode(st
+ register_pci_controller(&ssb_pcicore_controller);
+ }
+
+-static int pcicore_is_in_hostmode(struct ssb_pcicore *pc)
++static int __devinit pcicore_is_in_hostmode(struct ssb_pcicore *pc)
+ {
+ struct ssb_bus *bus = pc->dev->bus;
+ u16 chipid_top;
+@@ -432,25 +408,137 @@ static int pcicore_is_in_hostmode(struct
+ }
+ #endif /* CONFIG_SSB_PCICORE_HOSTMODE */
+
++/**************************************************
++ * Workarounds.
++ **************************************************/
++
++static void __devinit ssb_pcicore_fix_sprom_core_index(struct ssb_pcicore *pc)
++{
++ u16 tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(0));
++ if (((tmp & 0xF000) >> 12) != pc->dev->core_index) {
++ tmp &= ~0xF000;
++ tmp |= (pc->dev->core_index << 12);
++ pcicore_write16(pc, SSB_PCICORE_SPROM(0), tmp);
++ }
++}
++
++static u8 ssb_pcicore_polarity_workaround(struct ssb_pcicore *pc)
++{
++ return (ssb_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80;
++}
++
++static void ssb_pcicore_serdes_workaround(struct ssb_pcicore *pc)
++{
++ const u8 serdes_pll_device = 0x1D;
++ const u8 serdes_rx_device = 0x1F;
++ u16 tmp;
++
++ ssb_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */,
++ ssb_pcicore_polarity_workaround(pc));
++ tmp = ssb_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */);
++ if (tmp & 0x4000)
++ ssb_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000);
++}
++
++static void ssb_pcicore_pci_setup_workarounds(struct ssb_pcicore *pc)
++{
++ struct ssb_device *pdev = pc->dev;
++ struct ssb_bus *bus = pdev->bus;
++ u32 tmp;
++
++ tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
++ tmp |= SSB_PCICORE_SBTOPCI_PREF;
++ tmp |= SSB_PCICORE_SBTOPCI_BURST;
++ pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
++
++ if (pdev->id.revision < 5) {
++ tmp = ssb_read32(pdev, SSB_IMCFGLO);
++ tmp &= ~SSB_IMCFGLO_SERTO;
++ tmp |= 2;
++ tmp &= ~SSB_IMCFGLO_REQTO;
++ tmp |= 3 << SSB_IMCFGLO_REQTO_SHIFT;
++ ssb_write32(pdev, SSB_IMCFGLO, tmp);
++ ssb_commit_settings(bus);
++ } else if (pdev->id.revision >= 11) {
++ tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
++ tmp |= SSB_PCICORE_SBTOPCI_MRM;
++ pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
++ }
++}
++
++static void ssb_pcicore_pcie_setup_workarounds(struct ssb_pcicore *pc)
++{
++ u32 tmp;
++ u8 rev = pc->dev->id.revision;
++
++ if (rev == 0 || rev == 1) {
++ /* TLP Workaround register. */
++ tmp = ssb_pcie_read(pc, 0x4);
++ tmp |= 0x8;
++ ssb_pcie_write(pc, 0x4, tmp);
++ }
++ if (rev == 1) {
++ /* DLLP Link Control register. */
++ tmp = ssb_pcie_read(pc, 0x100);
++ tmp |= 0x40;
++ ssb_pcie_write(pc, 0x100, tmp);
++ }
++
++ if (rev == 0) {
++ const u8 serdes_rx_device = 0x1F;
++
++ ssb_pcie_mdio_write(pc, serdes_rx_device,
++ 2 /* Timer */, 0x8128);
++ ssb_pcie_mdio_write(pc, serdes_rx_device,
++ 6 /* CDR */, 0x0100);
++ ssb_pcie_mdio_write(pc, serdes_rx_device,
++ 7 /* CDR BW */, 0x1466);
++ } else if (rev == 3 || rev == 4 || rev == 5) {
++ /* TODO: DLLP Power Management Threshold */
++ ssb_pcicore_serdes_workaround(pc);
++ /* TODO: ASPM */
++ } else if (rev == 7) {
++ /* TODO: No PLL down */
++ }
++
++ if (rev >= 6) {
++ /* Miscellaneous Configuration Fixup */
++ tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(5));
++ if (!(tmp & 0x8000))
++ pcicore_write16(pc, SSB_PCICORE_SPROM(5),
++ tmp | 0x8000);
++ }
++}
+
+ /**************************************************
+ * Generic and Clientmode operation code.
+ **************************************************/
+
+-static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc)
++static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc)
+ {
++ struct ssb_device *pdev = pc->dev;
++ struct ssb_bus *bus = pdev->bus;
++
++ if (bus->bustype == SSB_BUSTYPE_PCI)
++ ssb_pcicore_fix_sprom_core_index(pc);
++
+ /* Disable PCI interrupts. */
+- ssb_write32(pc->dev, SSB_INTVEC, 0);
++ ssb_write32(pdev, SSB_INTVEC, 0);
++
++ /* Additional PCIe always once-executed workarounds */
++ if (pc->dev->id.coreid == SSB_DEV_PCIE) {
++ ssb_pcicore_serdes_workaround(pc);
++ /* TODO: ASPM */
++ /* TODO: Clock Request Update */
++ }
+ }
+
+-void ssb_pcicore_init(struct ssb_pcicore *pc)
++void __devinit ssb_pcicore_init(struct ssb_pcicore *pc)
+ {
+ struct ssb_device *dev = pc->dev;
+- struct ssb_bus *bus;
+
+ if (!dev)
+ return;
+- bus = dev->bus;
+ if (!ssb_device_is_enabled(dev))
+ ssb_device_enable(dev, 0);
+
+@@ -475,58 +563,104 @@ static void ssb_pcie_write(struct ssb_pc
+ pcicore_write32(pc, 0x134, data);
+ }
+
+-static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
+- u8 address, u16 data)
++static void ssb_pcie_mdio_set_phy(struct ssb_pcicore *pc, u8 phy)
+ {
+ const u16 mdio_control = 0x128;
+ const u16 mdio_data = 0x12C;
+ u32 v;
+ int i;
+
++ v = (1 << 30); /* Start of Transaction */
++ v |= (1 << 28); /* Write Transaction */
++ v |= (1 << 17); /* Turnaround */
++ v |= (0x1F << 18);
++ v |= (phy << 4);
++ pcicore_write32(pc, mdio_data, v);
++
++ udelay(10);
++ for (i = 0; i < 200; i++) {
++ v = pcicore_read32(pc, mdio_control);
++ if (v & 0x100 /* Trans complete */)
++ break;
++ msleep(1);
++ }
++}
++
++static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address)
++{
++ const u16 mdio_control = 0x128;
++ const u16 mdio_data = 0x12C;
++ int max_retries = 10;
++ u16 ret = 0;
++ u32 v;
++ int i;
++
+ v = 0x80; /* Enable Preamble Sequence */
+ v |= 0x2; /* MDIO Clock Divisor */
+ pcicore_write32(pc, mdio_control, v);
+
++ if (pc->dev->id.revision >= 10) {
++ max_retries = 200;
++ ssb_pcie_mdio_set_phy(pc, device);
++ }
++
+ v = (1 << 30); /* Start of Transaction */
+- v |= (1 << 28); /* Write Transaction */
++ v |= (1 << 29); /* Read Transaction */
+ v |= (1 << 17); /* Turnaround */
+- v |= (u32)device << 22;
++ if (pc->dev->id.revision < 10)
++ v |= (u32)device << 22;
+ v |= (u32)address << 18;
+- v |= data;
+ pcicore_write32(pc, mdio_data, v);
+ /* Wait for the device to complete the transaction */
+ udelay(10);
+- for (i = 0; i < 10; i++) {
++ for (i = 0; i < max_retries; i++) {
+ v = pcicore_read32(pc, mdio_control);
+- if (v & 0x100 /* Trans complete */)
++ if (v & 0x100 /* Trans complete */) {
++ udelay(10);
++ ret = pcicore_read32(pc, mdio_data);
+ break;
++ }
+ msleep(1);
+ }
+ pcicore_write32(pc, mdio_control, 0);
++ return ret;
+ }
+
+-static void ssb_broadcast_value(struct ssb_device *dev,
+- u32 address, u32 data)
++static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
++ u8 address, u16 data)
+ {
+- /* This is used for both, PCI and ChipCommon core, so be careful. */
+- BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR);
+- BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA);
++ const u16 mdio_control = 0x128;
++ const u16 mdio_data = 0x12C;
++ int max_retries = 10;
++ u32 v;
++ int i;
+
+- ssb_write32(dev, SSB_PCICORE_BCAST_ADDR, address);
+- ssb_read32(dev, SSB_PCICORE_BCAST_ADDR); /* flush */
+- ssb_write32(dev, SSB_PCICORE_BCAST_DATA, data);
+- ssb_read32(dev, SSB_PCICORE_BCAST_DATA); /* flush */
+-}
++ v = 0x80; /* Enable Preamble Sequence */
++ v |= 0x2; /* MDIO Clock Divisor */
++ pcicore_write32(pc, mdio_control, v);
+
+-static void ssb_commit_settings(struct ssb_bus *bus)
+-{
+- struct ssb_device *dev;
++ if (pc->dev->id.revision >= 10) {
++ max_retries = 200;
++ ssb_pcie_mdio_set_phy(pc, device);
++ }
+
+- dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev;
+- if (WARN_ON(!dev))
+- return;
+- /* This forces an update of the cached registers. */
+- ssb_broadcast_value(dev, 0xFD8, 0);
++ v = (1 << 30); /* Start of Transaction */
++ v |= (1 << 28); /* Write Transaction */
++ v |= (1 << 17); /* Turnaround */
++ if (pc->dev->id.revision < 10)
++ v |= (u32)device << 22;
++ v |= (u32)address << 18;
++ v |= data;
++ pcicore_write32(pc, mdio_data, v);
++ /* Wait for the device to complete the transaction */
++ udelay(10);
++ for (i = 0; i < max_retries; i++) {
++ v = pcicore_read32(pc, mdio_control);
++ if (v & 0x100 /* Trans complete */)
++ break;
++ msleep(1);
++ }
++ pcicore_write32(pc, mdio_control, 0);
+ }
+
+ int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
+@@ -551,13 +685,13 @@ int ssb_pcicore_dev_irqvecs_enable(struc
+ might_sleep_if(pdev->id.coreid != SSB_DEV_PCI);
+
+ /* Enable interrupts for this device. */
+- if (bus->host_pci &&
+- ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE))) {
++ if ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE)) {
+ u32 coremask;
+
+ /* Calculate the "coremask" for the device. */
+ coremask = (1 << dev->core_index);
+
++ SSB_WARN_ON(bus->bustype != SSB_BUSTYPE_PCI);
+ err = pci_read_config_dword(bus->host_pci, SSB_PCI_IRQMASK, &tmp);
+ if (err)
+ goto out;
+@@ -579,48 +713,10 @@ int ssb_pcicore_dev_irqvecs_enable(struc
+ if (pc->setup_done)
+ goto out;
+ if (pdev->id.coreid == SSB_DEV_PCI) {
+- tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
+- tmp |= SSB_PCICORE_SBTOPCI_PREF;
+- tmp |= SSB_PCICORE_SBTOPCI_BURST;
+- pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
+-
+- if (pdev->id.revision < 5) {
+- tmp = ssb_read32(pdev, SSB_IMCFGLO);
+- tmp &= ~SSB_IMCFGLO_SERTO;
+- tmp |= 2;
+- tmp &= ~SSB_IMCFGLO_REQTO;
+- tmp |= 3 << SSB_IMCFGLO_REQTO_SHIFT;
+- ssb_write32(pdev, SSB_IMCFGLO, tmp);
+- ssb_commit_settings(bus);
+- } else if (pdev->id.revision >= 11) {
+- tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
+- tmp |= SSB_PCICORE_SBTOPCI_MRM;
+- pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
+- }
++ ssb_pcicore_pci_setup_workarounds(pc);
+ } else {
+ WARN_ON(pdev->id.coreid != SSB_DEV_PCIE);
+- //TODO: Better make defines for all these magic PCIE values.
+- if ((pdev->id.revision == 0) || (pdev->id.revision == 1)) {
+- /* TLP Workaround register. */
+- tmp = ssb_pcie_read(pc, 0x4);
+- tmp |= 0x8;
+- ssb_pcie_write(pc, 0x4, tmp);
+- }
+- if (pdev->id.revision == 0) {
+- const u8 serdes_rx_device = 0x1F;
+-
+- ssb_pcie_mdio_write(pc, serdes_rx_device,
+- 2 /* Timer */, 0x8128);
+- ssb_pcie_mdio_write(pc, serdes_rx_device,
+- 6 /* CDR */, 0x0100);
+- ssb_pcie_mdio_write(pc, serdes_rx_device,
+- 7 /* CDR BW */, 0x1466);
+- } else if (pdev->id.revision == 1) {
+- /* DLLP Link Control register. */
+- tmp = ssb_pcie_read(pc, 0x100);
+- tmp |= 0x40;
+- ssb_pcie_write(pc, 0x100, tmp);
+- }
++ ssb_pcicore_pcie_setup_workarounds(pc);
+ }
+ pc->setup_done = 1;
+ out:
+--- a/drivers/ssb/main.c
++++ b/drivers/ssb/main.c
+@@ -3,7 +3,7 @@
+ * Subsystem core
+ *
+ * Copyright 2005, Broadcom Corporation
+- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+@@ -12,11 +12,14 @@
+
+ #include <linux/delay.h>
+ #include <linux/io.h>
++#include <linux/module.h>
+ #include <linux/ssb/ssb.h>
+ #include <linux/ssb/ssb_regs.h>
+ #include <linux/ssb/ssb_driver_gige.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/pci.h>
++#include <linux/mmc/sdio_func.h>
++#include <linux/slab.h>
+
+ #include <pcmcia/cs_types.h>
+ #include <pcmcia/cs.h>
+@@ -88,6 +91,25 @@ found:
+ }
+ #endif /* CONFIG_SSB_PCMCIAHOST */
+
++#ifdef CONFIG_SSB_SDIOHOST
++struct ssb_bus *ssb_sdio_func_to_bus(struct sdio_func *func)
++{
++ struct ssb_bus *bus;
++
++ ssb_buses_lock();
++ list_for_each_entry(bus, &buses, list) {
++ if (bus->bustype == SSB_BUSTYPE_SDIO &&
++ bus->host_sdio == func)
++ goto found;
++ }
++ bus = NULL;
++found:
++ ssb_buses_unlock();
++
++ return bus;
++}
++#endif /* CONFIG_SSB_SDIOHOST */
++
+ int ssb_for_each_bus_call(unsigned long data,
+ int (*func)(struct ssb_bus *bus, unsigned long data))
+ {
+@@ -120,6 +142,19 @@ static void ssb_device_put(struct ssb_de
+ put_device(dev->dev);
+ }
+
++static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv)
++{
++ if (drv)
++ get_driver(&drv->drv);
++ return drv;
++}
++
++static inline void ssb_driver_put(struct ssb_driver *drv)
++{
++ if (drv)
++ put_driver(&drv->drv);
++}
++
+ static int ssb_device_resume(struct device *dev)
+ {
+ struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
+@@ -190,90 +225,81 @@ int ssb_bus_suspend(struct ssb_bus *bus)
+ EXPORT_SYMBOL(ssb_bus_suspend);
+
+ #ifdef CONFIG_SSB_SPROM
+-int ssb_devices_freeze(struct ssb_bus *bus)
++/** ssb_devices_freeze - Freeze all devices on the bus.
++ *
++ * After freezing no device driver will be handling a device
++ * on this bus anymore. ssb_devices_thaw() must be called after
++ * a successful freeze to reactivate the devices.
++ *
++ * @bus: The bus.
++ * @ctx: Context structure. Pass this to ssb_devices_thaw().
++ */
++int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx)
+ {
+- struct ssb_device *dev;
+- struct ssb_driver *drv;
+- int err = 0;
+- int i;
+- pm_message_t state = PMSG_FREEZE;
++ struct ssb_device *sdev;
++ struct ssb_driver *sdrv;
++ unsigned int i;
++
++ memset(ctx, 0, sizeof(*ctx));
++ ctx->bus = bus;
++ SSB_WARN_ON(bus->nr_devices > ARRAY_SIZE(ctx->device_frozen));
+
+- /* First check that we are capable to freeze all devices. */
+ for (i = 0; i < bus->nr_devices; i++) {
+- dev = &(bus->devices[i]);
+- if (!dev->dev ||
+- !dev->dev->driver ||
+- !device_is_registered(dev->dev))
+- continue;
+- drv = drv_to_ssb_drv(dev->dev->driver);
+- if (!drv)
++ sdev = ssb_device_get(&bus->devices[i]);
++
++ if (!sdev->dev || !sdev->dev->driver ||
++ !device_is_registered(sdev->dev)) {
++ ssb_device_put(sdev);
+ continue;
+- if (!drv->suspend) {
+- /* Nope, can't suspend this one. */
+- return -EOPNOTSUPP;
+ }
+- }
+- /* Now suspend all devices */
+- for (i = 0; i < bus->nr_devices; i++) {
+- dev = &(bus->devices[i]);
+- if (!dev->dev ||
+- !dev->dev->driver ||
+- !device_is_registered(dev->dev))
+- continue;
+- drv = drv_to_ssb_drv(dev->dev->driver);
+- if (!drv)
++ sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver));
++ if (!sdrv || SSB_WARN_ON(!sdrv->remove)) {
++ ssb_device_put(sdev);
+ continue;
+- err = drv->suspend(dev, state);
+- if (err) {
+- ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n",
+- dev_name(dev->dev));
+- goto err_unwind;
+ }
++ sdrv->remove(sdev);
++ ctx->device_frozen[i] = 1;
+ }
+
+ return 0;
+-err_unwind:
+- for (i--; i >= 0; i--) {
+- dev = &(bus->devices[i]);
+- if (!dev->dev ||
+- !dev->dev->driver ||
+- !device_is_registered(dev->dev))
+- continue;
+- drv = drv_to_ssb_drv(dev->dev->driver);
+- if (!drv)
+- continue;
+- if (drv->resume)
+- drv->resume(dev);
+- }
+- return err;
+ }
+
+-int ssb_devices_thaw(struct ssb_bus *bus)
++/** ssb_devices_thaw - Unfreeze all devices on the bus.
++ *
++ * This will re-attach the device drivers and re-init the devices.
++ *
++ * @ctx: The context structure from ssb_devices_freeze()
++ */
++int ssb_devices_thaw(struct ssb_freeze_context *ctx)
+ {
+- struct ssb_device *dev;
+- struct ssb_driver *drv;
+- int err;
+- int i;
++ struct ssb_bus *bus = ctx->bus;
++ struct ssb_device *sdev;
++ struct ssb_driver *sdrv;
++ unsigned int i;
++ int err, result = 0;
+
+ for (i = 0; i < bus->nr_devices; i++) {
+- dev = &(bus->devices[i]);
+- if (!dev->dev ||
+- !dev->dev->driver ||
+- !device_is_registered(dev->dev))
++ if (!ctx->device_frozen[i])
+ continue;
+- drv = drv_to_ssb_drv(dev->dev->driver);
+- if (!drv)
++ sdev = &bus->devices[i];
++
++ if (SSB_WARN_ON(!sdev->dev || !sdev->dev->driver))
+ continue;
+- if (SSB_WARN_ON(!drv->resume))
++ sdrv = drv_to_ssb_drv(sdev->dev->driver);
++ if (SSB_WARN_ON(!sdrv || !sdrv->probe))
+ continue;
+- err = drv->resume(dev);
++
++ err = sdrv->probe(sdev, &sdev->id);
+ if (err) {
+ ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
+- dev_name(dev->dev));
++ dev_name(sdev->dev));
++ result = err;
+ }
++ ssb_driver_put(sdrv);
++ ssb_device_put(sdev);
+ }
+
+- return 0;
++ return result;
+ }
+ #endif /* CONFIG_SSB_SPROM */
+
+@@ -360,6 +386,35 @@ static int ssb_device_uevent(struct devi
+ ssb_dev->id.revision);
+ }
+
++#define ssb_config_attr(attrib, field, format_string) \
++static ssize_t \
++attrib##_show(struct device *dev, struct device_attribute *attr, char *buf) \
++{ \
++ return sprintf(buf, format_string, dev_to_ssb_dev(dev)->field); \
++}
++
++ssb_config_attr(core_num, core_index, "%u\n")
++ssb_config_attr(coreid, id.coreid, "0x%04x\n")
++ssb_config_attr(vendor, id.vendor, "0x%04x\n")
++ssb_config_attr(revision, id.revision, "%u\n")
++ssb_config_attr(irq, irq, "%u\n")
++static ssize_t
++name_show(struct device *dev, struct device_attribute *attr, char *buf)
++{
++ return sprintf(buf, "%s\n",
++ ssb_core_name(dev_to_ssb_dev(dev)->id.coreid));
++}
++
++static struct device_attribute ssb_device_attrs[] = {
++ __ATTR_RO(name),
++ __ATTR_RO(core_num),
++ __ATTR_RO(coreid),
++ __ATTR_RO(vendor),
++ __ATTR_RO(revision),
++ __ATTR_RO(irq),
++ __ATTR_NULL,
++};
++
+ static struct bus_type ssb_bustype = {
+ .name = "ssb",
+ .match = ssb_bus_match,
+@@ -369,6 +424,7 @@ static struct bus_type ssb_bustype = {
+ .suspend = ssb_device_suspend,
+ .resume = ssb_device_resume,
+ .uevent = ssb_device_uevent,
++ .dev_attrs = ssb_device_attrs,
+ };
+
+ static void ssb_buses_lock(void)
+@@ -461,6 +517,7 @@ static int ssb_devices_register(struct s
+ #ifdef CONFIG_SSB_PCIHOST
+ sdev->irq = bus->host_pci->irq;
+ dev->parent = &bus->host_pci->dev;
++ sdev->dma_dev = dev->parent;
+ #endif
+ break;
+ case SSB_BUSTYPE_PCMCIA:
+@@ -469,8 +526,14 @@ static int ssb_devices_register(struct s
+ dev->parent = &bus->host_pcmcia->dev;
+ #endif
+ break;
++ case SSB_BUSTYPE_SDIO:
++#ifdef CONFIG_SSB_SDIOHOST
++ dev->parent = &bus->host_sdio->dev;
++#endif
++ break;
+ case SSB_BUSTYPE_SSB:
+ dev->dma_mask = &dev->coherent_dma_mask;
++ sdev->dma_dev = dev;
+ break;
+ }
+
+@@ -497,7 +560,7 @@ error:
+ }
+
+ /* Needs ssb_buses_lock() */
+-static int ssb_attach_queued_buses(void)
++static int __devinit ssb_attach_queued_buses(void)
+ {
+ struct ssb_bus *bus, *n;
+ int err = 0;
+@@ -708,9 +771,9 @@ out:
+ return err;
+ }
+
+-static int ssb_bus_register(struct ssb_bus *bus,
+- ssb_invariants_func_t get_invariants,
+- unsigned long baseaddr)
++static int __devinit ssb_bus_register(struct ssb_bus *bus,
++ ssb_invariants_func_t get_invariants,
++ unsigned long baseaddr)
+ {
+ int err;
+
+@@ -724,12 +787,18 @@ static int ssb_bus_register(struct ssb_b
+ err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
+ if (err)
+ goto out;
++
++ /* Init SDIO-host device (if any), before the scan */
++ err = ssb_sdio_init(bus);
++ if (err)
++ goto err_disable_xtal;
++
+ ssb_buses_lock();
+ bus->busnumber = next_busnumber;
+ /* Scan for devices (cores) */
+ err = ssb_bus_scan(bus, baseaddr);
+ if (err)
+- goto err_disable_xtal;
++ goto err_sdio_exit;
+
+ /* Init PCI-host device (if any) */
+ err = ssb_pci_init(bus);
+@@ -776,6 +845,8 @@ err_pci_exit:
+ ssb_pci_exit(bus);
+ err_unmap:
+ ssb_iounmap(bus);
++err_sdio_exit:
++ ssb_sdio_exit(bus);
+ err_disable_xtal:
+ ssb_buses_unlock();
+ ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
+@@ -783,8 +854,8 @@ err_disable_xtal:
+ }
+
+ #ifdef CONFIG_SSB_PCIHOST
+-int ssb_bus_pcibus_register(struct ssb_bus *bus,
+- struct pci_dev *host_pci)
++int __devinit ssb_bus_pcibus_register(struct ssb_bus *bus,
++ struct pci_dev *host_pci)
+ {
+ int err;
+
+@@ -796,6 +867,9 @@ int ssb_bus_pcibus_register(struct ssb_b
+ if (!err) {
+ ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+ "PCI device %s\n", dev_name(&host_pci->dev));
++ } else {
++ ssb_printk(KERN_ERR PFX "Failed to register PCI version"
++ " of SSB with error %d\n", err);
+ }
+
+ return err;
+@@ -804,9 +878,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register);
+ #endif /* CONFIG_SSB_PCIHOST */
+
+ #ifdef CONFIG_SSB_PCMCIAHOST
+-int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
+- struct pcmcia_device *pcmcia_dev,
+- unsigned long baseaddr)
++int __devinit ssb_bus_pcmciabus_register(struct ssb_bus *bus,
++ struct pcmcia_device *pcmcia_dev,
++ unsigned long baseaddr)
+ {
+ int err;
+
+@@ -825,9 +899,32 @@ int ssb_bus_pcmciabus_register(struct ss
+ EXPORT_SYMBOL(ssb_bus_pcmciabus_register);
+ #endif /* CONFIG_SSB_PCMCIAHOST */
+
+-int ssb_bus_ssbbus_register(struct ssb_bus *bus,
+- unsigned long baseaddr,
+- ssb_invariants_func_t get_invariants)
++#ifdef CONFIG_SSB_SDIOHOST
++int __devinit ssb_bus_sdiobus_register(struct ssb_bus *bus,
++ struct sdio_func *func,
++ unsigned int quirks)
++{
++ int err;
++
++ bus->bustype = SSB_BUSTYPE_SDIO;
++ bus->host_sdio = func;
++ bus->ops = &ssb_sdio_ops;
++ bus->quirks = quirks;
++
++ err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
++ if (!err) {
++ ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
++ "SDIO device %s\n", sdio_func_id(func));
++ }
++
++ return err;
++}
++EXPORT_SYMBOL(ssb_bus_sdiobus_register);
++#endif /* CONFIG_SSB_PCMCIAHOST */
++
++int __devinit ssb_bus_ssbbus_register(struct ssb_bus *bus,
++ unsigned long baseaddr,
++ ssb_invariants_func_t get_invariants)
+ {
+ int err;
+
+@@ -908,8 +1005,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32
+ switch (plltype) {
+ case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
+ if (m & SSB_CHIPCO_CLK_T6_MMASK)
+- return SSB_CHIPCO_CLK_T6_M0;
+- return SSB_CHIPCO_CLK_T6_M1;
++ return SSB_CHIPCO_CLK_T6_M1;
++ return SSB_CHIPCO_CLK_T6_M0;
+ case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
+ case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
+ case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
+@@ -1024,23 +1121,22 @@ static u32 ssb_tmslow_reject_bitmask(str
+ {
+ u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV;
+
+- /* The REJECT bit changed position in TMSLOW between
+- * Backplane revisions. */
++ /* The REJECT bit seems to be different for Backplane rev 2.3 */
+ switch (rev) {
+ case SSB_IDLOW_SSBREV_22:
+- return SSB_TMSLOW_REJECT_22;
++ case SSB_IDLOW_SSBREV_24:
++ case SSB_IDLOW_SSBREV_26:
++ return SSB_TMSLOW_REJECT;
+ case SSB_IDLOW_SSBREV_23:
+ return SSB_TMSLOW_REJECT_23;
+- case SSB_IDLOW_SSBREV_24: /* TODO - find the proper REJECT bits */
+- case SSB_IDLOW_SSBREV_25: /* same here */
+- case SSB_IDLOW_SSBREV_26: /* same here */
++ case SSB_IDLOW_SSBREV_25: /* TODO - find the proper REJECT bit */
+ case SSB_IDLOW_SSBREV_27: /* same here */
+- return SSB_TMSLOW_REJECT_23; /* this is a guess */
++ return SSB_TMSLOW_REJECT; /* this is a guess */
+ default:
+ printk(KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev);
+ WARN_ON(1);
+ }
+- return (SSB_TMSLOW_REJECT_22 | SSB_TMSLOW_REJECT_23);
++ return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23);
+ }
+
+ int ssb_device_is_enabled(struct ssb_device *dev)
+@@ -1099,10 +1195,10 @@ void ssb_device_enable(struct ssb_device
+ }
+ EXPORT_SYMBOL(ssb_device_enable);
+
+-/* Wait for a bit in a register to get set or unset.
++/* Wait for bitmask in a register to get set or cleared.
+ * timeout is in units of ten-microseconds */
+-static int ssb_wait_bit(struct ssb_device *dev, u16 reg, u32 bitmask,
+- int timeout, int set)
++static int ssb_wait_bits(struct ssb_device *dev, u16 reg, u32 bitmask,
++ int timeout, int set)
+ {
+ int i;
+ u32 val;
+@@ -1110,7 +1206,7 @@ static int ssb_wait_bit(struct ssb_devic
+ for (i = 0; i < timeout; i++) {
+ val = ssb_read32(dev, reg);
+ if (set) {
+- if (val & bitmask)
++ if ((val & bitmask) == bitmask)
+ return 0;
+ } else {
+ if (!(val & bitmask))
+@@ -1127,20 +1223,38 @@ static int ssb_wait_bit(struct ssb_devic
+
+ void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags)
+ {
+- u32 reject;
++ u32 reject, val;
+
+ if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET)
+ return;
+
+ reject = ssb_tmslow_reject_bitmask(dev);
+- ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK);
+- ssb_wait_bit(dev, SSB_TMSLOW, reject, 1000, 1);
+- ssb_wait_bit(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);
+- ssb_write32(dev, SSB_TMSLOW,
+- SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
+- reject | SSB_TMSLOW_RESET |
+- core_specific_flags);
+- ssb_flush_tmslow(dev);
++
++ if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_CLOCK) {
++ ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK);
++ ssb_wait_bits(dev, SSB_TMSLOW, reject, 1000, 1);
++ ssb_wait_bits(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);
++
++ if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) {
++ val = ssb_read32(dev, SSB_IMSTATE);
++ val |= SSB_IMSTATE_REJECT;
++ ssb_write32(dev, SSB_IMSTATE, val);
++ ssb_wait_bits(dev, SSB_IMSTATE, SSB_IMSTATE_BUSY, 1000,
++ 0);
++ }
++
++ ssb_write32(dev, SSB_TMSLOW,
++ SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
++ reject | SSB_TMSLOW_RESET |
++ core_specific_flags);
++ ssb_flush_tmslow(dev);
++
++ if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) {
++ val = ssb_read32(dev, SSB_IMSTATE);
++ val &= ~SSB_IMSTATE_REJECT;
++ ssb_write32(dev, SSB_IMSTATE, val);
++ }
++ }
+
+ ssb_write32(dev, SSB_TMSLOW,
+ reject | SSB_TMSLOW_RESET |
+@@ -1149,13 +1263,34 @@ void ssb_device_disable(struct ssb_devic
+ }
+ EXPORT_SYMBOL(ssb_device_disable);
+
++/* Some chipsets need routing known for PCIe and 64-bit DMA */
++static bool ssb_dma_translation_special_bit(struct ssb_device *dev)
++{
++ u16 chip_id = dev->bus->chip_id;
++
++ if (dev->id.coreid == SSB_DEV_80211) {
++ return (chip_id == 0x4322 || chip_id == 43221 ||
++ chip_id == 43231 || chip_id == 43222);
++ }
++
++ return 0;
++}
++
+ u32 ssb_dma_translation(struct ssb_device *dev)
+ {
+ switch (dev->bus->bustype) {
+ case SSB_BUSTYPE_SSB:
+ return 0;
+ case SSB_BUSTYPE_PCI:
+- return SSB_PCI_DMA;
++ if (dev->bus->host_pci->is_pcie &&
++ ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) {
++ return SSB_PCIE_DMA_H32;
++ } else {
++ if (ssb_dma_translation_special_bit(dev))
++ return SSB_PCIE_DMA_H32;
++ else
++ return SSB_PCI_DMA;
++ }
+ default:
+ __ssb_dma_not_implemented(dev);
+ }
+@@ -1272,20 +1407,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown);
+
+ int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl)
+ {
+- struct ssb_chipcommon *cc;
+ int err;
+ enum ssb_clkmode mode;
+
+ err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
+ if (err)
+ goto error;
+- cc = &bus->chipco;
+- mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST;
+- ssb_chipco_set_clockmode(cc, mode);
+
+ #ifdef CONFIG_SSB_DEBUG
+ bus->powered_up = 1;
+ #endif
++
++ mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST;
++ ssb_chipco_set_clockmode(&bus->chipco, mode);
++
+ return 0;
+ error:
+ ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
+@@ -1293,6 +1428,37 @@ error:
+ }
+ EXPORT_SYMBOL(ssb_bus_powerup);
+
++static void ssb_broadcast_value(struct ssb_device *dev,
++ u32 address, u32 data)
++{
++#ifdef CONFIG_SSB_DRIVER_PCICORE
++ /* This is used for both, PCI and ChipCommon core, so be careful. */
++ BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR);
++ BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA);
++#endif
++
++ ssb_write32(dev, SSB_CHIPCO_BCAST_ADDR, address);
++ ssb_read32(dev, SSB_CHIPCO_BCAST_ADDR); /* flush */
++ ssb_write32(dev, SSB_CHIPCO_BCAST_DATA, data);
++ ssb_read32(dev, SSB_CHIPCO_BCAST_DATA); /* flush */
++}
++
++void ssb_commit_settings(struct ssb_bus *bus)
++{
++ struct ssb_device *dev;
++
++#ifdef CONFIG_SSB_DRIVER_PCICORE
++ dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev;
++#else
++ dev = bus->chipco.dev;
++#endif
++ if (WARN_ON(!dev))
++ return;
++ /* This forces an update of the cached registers. */
++ ssb_broadcast_value(dev, 0xFD8, 0);
++}
++EXPORT_SYMBOL(ssb_commit_settings);
++
+ u32 ssb_admatch_base(u32 adm)
+ {
+ u32 base = 0;
+@@ -1358,8 +1524,10 @@ static int __init ssb_modinit(void)
+ ssb_buses_lock();
+ err = ssb_attach_queued_buses();
+ ssb_buses_unlock();
+- if (err)
++ if (err) {
+ bus_unregister(&ssb_bustype);
++ goto out;
++ }
+
+ err = b43_pci_ssb_bridge_init();
+ if (err) {
+@@ -1375,7 +1543,7 @@ static int __init ssb_modinit(void)
+ /* don't fail SSB init because of this */
+ err = 0;
+ }
+-
++out:
+ return err;
+ }
+ /* ssb must be initialized after PCI but before the ssb drivers.
+--- a/drivers/ssb/pci.c
++++ b/drivers/ssb/pci.c
+@@ -1,7 +1,7 @@
+ /*
+ * Sonics Silicon Backplane PCI-Hostbus related functions.
+ *
+- * Copyright (C) 2005-2006 Michael Buesch <mb@bu3sch.de>
++ * Copyright (C) 2005-2006 Michael Buesch <m@bues.ch>
+ * Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
+ * Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
+ * Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
+@@ -17,6 +17,7 @@
+
+ #include <linux/ssb/ssb.h>
+ #include <linux/ssb/ssb_regs.h>
++#include <linux/slab.h>
+ #include <linux/pci.h>
+ #include <linux/delay.h>
+
+@@ -167,10 +168,16 @@ err_pci:
+ }
+
+ /* Get the word-offset for a SSB_SPROM_XXX define. */
+-#define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16))
++#define SPOFF(offset) ((offset) / sizeof(u16))
+ /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
+-#define SPEX(_outvar, _offset, _mask, _shift) \
++#define SPEX16(_outvar, _offset, _mask, _shift) \
+ out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
++#define SPEX32(_outvar, _offset, _mask, _shift) \
++ out->_outvar = ((((u32)in[SPOFF((_offset)+2)] << 16 | \
++ in[SPOFF(_offset)]) & (_mask)) >> (_shift))
++#define SPEX(_outvar, _offset, _mask, _shift) \
++ SPEX16(_outvar, _offset, _mask, _shift)
++
+
+ static inline u8 ssb_crc8(u8 crc, u8 data)
+ {
+@@ -247,7 +254,7 @@ static int sprom_do_read(struct ssb_bus
+ int i;
+
+ for (i = 0; i < bus->sprom_size; i++)
+- sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2));
++ sprom[i] = ioread16(bus->mmio + bus->sprom_offset + (i * 2));
+
+ return 0;
+ }
+@@ -278,7 +285,7 @@ static int sprom_do_write(struct ssb_bus
+ ssb_printk("75%%");
+ else if (i % 2)
+ ssb_printk(".");
+- writew(sprom[i], bus->mmio + SSB_SPROM_BASE + (i * 2));
++ writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
+ mmiowb();
+ msleep(20);
+ }
+@@ -399,6 +406,46 @@ static void sprom_extract_r123(struct ss
+ out->antenna_gain.ghz5.a3 = gain;
+ }
+
++/* Revs 4 5 and 8 have partially shared layout */
++static void sprom_extract_r458(struct ssb_sprom *out, const u16 *in)
++{
++ SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01,
++ SSB_SPROM4_TXPID2G0, SSB_SPROM4_TXPID2G0_SHIFT);
++ SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01,
++ SSB_SPROM4_TXPID2G1, SSB_SPROM4_TXPID2G1_SHIFT);
++ SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23,
++ SSB_SPROM4_TXPID2G2, SSB_SPROM4_TXPID2G2_SHIFT);
++ SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23,
++ SSB_SPROM4_TXPID2G3, SSB_SPROM4_TXPID2G3_SHIFT);
++
++ SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01,
++ SSB_SPROM4_TXPID5GL0, SSB_SPROM4_TXPID5GL0_SHIFT);
++ SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01,
++ SSB_SPROM4_TXPID5GL1, SSB_SPROM4_TXPID5GL1_SHIFT);
++ SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23,
++ SSB_SPROM4_TXPID5GL2, SSB_SPROM4_TXPID5GL2_SHIFT);
++ SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23,
++ SSB_SPROM4_TXPID5GL3, SSB_SPROM4_TXPID5GL3_SHIFT);
++
++ SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01,
++ SSB_SPROM4_TXPID5G0, SSB_SPROM4_TXPID5G0_SHIFT);
++ SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01,
++ SSB_SPROM4_TXPID5G1, SSB_SPROM4_TXPID5G1_SHIFT);
++ SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23,
++ SSB_SPROM4_TXPID5G2, SSB_SPROM4_TXPID5G2_SHIFT);
++ SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23,
++ SSB_SPROM4_TXPID5G3, SSB_SPROM4_TXPID5G3_SHIFT);
++
++ SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01,
++ SSB_SPROM4_TXPID5GH0, SSB_SPROM4_TXPID5GH0_SHIFT);
++ SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01,
++ SSB_SPROM4_TXPID5GH1, SSB_SPROM4_TXPID5GH1_SHIFT);
++ SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23,
++ SSB_SPROM4_TXPID5GH2, SSB_SPROM4_TXPID5GH2_SHIFT);
++ SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23,
++ SSB_SPROM4_TXPID5GH3, SSB_SPROM4_TXPID5GH3_SHIFT);
++}
++
+ static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
+ {
+ int i;
+@@ -421,10 +468,14 @@ static void sprom_extract_r45(struct ssb
+ SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0);
+ SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
+ SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0);
++ SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0);
++ SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0);
+ } else {
+ SPEX(country_code, SSB_SPROM5_CCODE, 0xFFFF, 0);
+ SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0);
+ SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0);
++ SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0);
++ SPEX(boardflags2_hi, SSB_SPROM5_BFL2HI, 0xFFFF, 0);
+ }
+ SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
+ SSB_SPROM4_ANTAVAIL_A_SHIFT);
+@@ -464,22 +515,32 @@ static void sprom_extract_r45(struct ssb
+ memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
+ sizeof(out->antenna_gain.ghz5));
+
++ sprom_extract_r458(out, in);
++
+ /* TODO - get remaining rev 4 stuff needed */
+ }
+
+ static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
+ {
+ int i;
+- u16 v;
++ u16 v, o;
++ u16 pwr_info_offset[] = {
++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
++ };
++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
++ ARRAY_SIZE(out->core_pwr_info));
+
+ /* extract the MAC address */
+ for (i = 0; i < 3; i++) {
+- v = in[SPOFF(SSB_SPROM1_IL0MAC) + i];
++ v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
+ *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+ }
+ SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0);
+ SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
+ SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0);
++ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0);
++ SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, 0xFFFF, 0);
+ SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A,
+ SSB_SPROM8_ANTAVAIL_A_SHIFT);
+ SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG,
+@@ -490,12 +551,55 @@ static void sprom_extract_r8(struct ssb_
+ SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0);
+ SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A,
+ SSB_SPROM8_ITSSI_A_SHIFT);
++ SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0);
++ SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK,
++ SSB_SPROM8_MAXP_AL_SHIFT);
+ SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0);
+ SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1,
+ SSB_SPROM8_GPIOA_P1_SHIFT);
+ SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0);
+ SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3,
+ SSB_SPROM8_GPIOB_P3_SHIFT);
++ SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0);
++ SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G,
++ SSB_SPROM8_TRI5G_SHIFT);
++ SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0);
++ SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH,
++ SSB_SPROM8_TRI5GH_SHIFT);
++ SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, 0);
++ SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G,
++ SSB_SPROM8_RXPO5G_SHIFT);
++ SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0);
++ SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G,
++ SSB_SPROM8_RSSISMC2G_SHIFT);
++ SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G,
++ SSB_SPROM8_RSSISAV2G_SHIFT);
++ SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G,
++ SSB_SPROM8_BXA2G_SHIFT);
++ SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0);
++ SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G,
++ SSB_SPROM8_RSSISMC5G_SHIFT);
++ SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G,
++ SSB_SPROM8_RSSISAV5G_SHIFT);
++ SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G,
++ SSB_SPROM8_BXA5G_SHIFT);
++ SPEX(pa0b0, SSB_SPROM8_PA0B0, 0xFFFF, 0);
++ SPEX(pa0b1, SSB_SPROM8_PA0B1, 0xFFFF, 0);
++ SPEX(pa0b2, SSB_SPROM8_PA0B2, 0xFFFF, 0);
++ SPEX(pa1b0, SSB_SPROM8_PA1B0, 0xFFFF, 0);
++ SPEX(pa1b1, SSB_SPROM8_PA1B1, 0xFFFF, 0);
++ SPEX(pa1b2, SSB_SPROM8_PA1B2, 0xFFFF, 0);
++ SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, 0xFFFF, 0);
++ SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, 0xFFFF, 0);
++ SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, 0xFFFF, 0);
++ SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, 0xFFFF, 0);
++ SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, 0xFFFF, 0);
++ SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, 0xFFFF, 0);
++ SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, 0xFFFF, 0);
++ SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, 0xFFFFFFFF, 0);
++ SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, 0xFFFFFFFF, 0);
++ SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, 0xFFFFFFFF, 0);
++ SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
+
+ /* Extract the antenna gain values. */
+ SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01,
+@@ -509,6 +613,63 @@ static void sprom_extract_r8(struct ssb_
+ memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
+ sizeof(out->antenna_gain.ghz5));
+
++ /* Extract cores power info info */
++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
++ o = pwr_info_offset[i];
++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT);
++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
++ SSB_SPROM8_2G_MAXP, 0);
++
++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0);
++
++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT);
++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
++ SSB_SPROM8_5G_MAXP, 0);
++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP,
++ SSB_SPROM8_5GH_MAXP, 0);
++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP,
++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT);
++
++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0);
++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0);
++ }
++
++ /* Extract FEM info */
++ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G,
++ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
++ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G,
++ SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT);
++ SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G,
++ SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT);
++ SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G,
++ SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT);
++ SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G,
++ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
++
++ SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G,
++ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
++ SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G,
++ SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT);
++ SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G,
++ SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT);
++ SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G,
++ SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT);
++ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G,
++ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
++
++ sprom_extract_r458(out, in);
++
+ /* TODO - get remaining rev 8 stuff needed */
+ }
+
+@@ -521,36 +682,34 @@ static int sprom_extract(struct ssb_bus
+ ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
+ memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */
+ memset(out->et1mac, 0xFF, 6);
++
+ if ((bus->chip_id & 0xFF00) == 0x4400) {
+ /* Workaround: The BCM44XX chip has a stupid revision
+ * number stored in the SPROM.
+ * Always extract r1. */
+ out->revision = 1;
++ ssb_dprintk(KERN_DEBUG PFX "SPROM treated as revision %d\n", out->revision);
++ }
++
++ switch (out->revision) {
++ case 1:
++ case 2:
++ case 3:
+ sprom_extract_r123(out, in);
+- } else if (bus->chip_id == 0x4321) {
+- /* the BCM4328 has a chipid == 0x4321 and a rev 4 SPROM */
+- out->revision = 4;
++ break;
++ case 4:
++ case 5:
+ sprom_extract_r45(out, in);
+- } else {
+- switch (out->revision) {
+- case 1:
+- case 2:
+- case 3:
+- sprom_extract_r123(out, in);
+- break;
+- case 4:
+- case 5:
+- sprom_extract_r45(out, in);
+- break;
+- case 8:
+- sprom_extract_r8(out, in);
+- break;
+- default:
+- ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
+- " revision %d detected. Will extract"
+- " v1\n", out->revision);
+- sprom_extract_r123(out, in);
+- }
++ break;
++ case 8:
++ sprom_extract_r8(out, in);
++ break;
++ default:
++ ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
++ " revision %d detected. Will extract"
++ " v1\n", out->revision);
++ out->revision = 1;
++ sprom_extract_r123(out, in);
+ }
+
+ if (out->boardflags_lo == 0xFFFF)
+@@ -564,13 +723,34 @@ static int sprom_extract(struct ssb_bus
+ static int ssb_pci_sprom_get(struct ssb_bus *bus,
+ struct ssb_sprom *sprom)
+ {
+- const struct ssb_sprom *fallback;
+- int err = -ENOMEM;
++ int err;
+ u16 *buf;
+
++ if (!ssb_is_sprom_available(bus)) {
++ ssb_printk(KERN_ERR PFX "No SPROM available!\n");
++ return -ENODEV;
++ }
++ if (bus->chipco.dev) { /* can be unavailable! */
++ /*
++ * get SPROM offset: SSB_SPROM_BASE1 except for
++ * chipcommon rev >= 31 or chip ID is 0x4312 and
++ * chipcommon status & 3 == 2
++ */
++ if (bus->chipco.dev->id.revision >= 31)
++ bus->sprom_offset = SSB_SPROM_BASE31;
++ else if (bus->chip_id == 0x4312 &&
++ (bus->chipco.status & 0x03) == 2)
++ bus->sprom_offset = SSB_SPROM_BASE31;
++ else
++ bus->sprom_offset = SSB_SPROM_BASE1;
++ } else {
++ bus->sprom_offset = SSB_SPROM_BASE1;
++ }
++ ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset);
++
+ buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
+ if (!buf)
+- goto out;
++ return -ENOMEM;
+ bus->sprom_size = SSB_SPROMSIZE_WORDS_R123;
+ sprom_do_read(bus, buf);
+ err = sprom_check_crc(buf, bus->sprom_size);
+@@ -580,17 +760,24 @@ static int ssb_pci_sprom_get(struct ssb_
+ buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
+ GFP_KERNEL);
+ if (!buf)
+- goto out;
++ return -ENOMEM;
+ bus->sprom_size = SSB_SPROMSIZE_WORDS_R4;
+ sprom_do_read(bus, buf);
+ err = sprom_check_crc(buf, bus->sprom_size);
+ if (err) {
+ /* All CRC attempts failed.
+ * Maybe there is no SPROM on the device?
+- * If we have a fallback, use that. */
+- fallback = ssb_get_fallback_sprom();
+- if (fallback) {
+- memcpy(sprom, fallback, sizeof(*sprom));
++ * Now we ask the arch code if there is some sprom
++ * available for this device in some other storage */
++ err = ssb_fill_sprom_with_fallback(bus, sprom);
++ if (err) {
++ ssb_printk(KERN_WARNING PFX "WARNING: Using"
++ " fallback SPROM failed (err %d)\n",
++ err);
++ } else {
++ ssb_dprintk(KERN_DEBUG PFX "Using SPROM"
++ " revision %d provided by"
++ " platform.\n", sprom->revision);
+ err = 0;
+ goto out_free;
+ }
+@@ -602,19 +789,15 @@ static int ssb_pci_sprom_get(struct ssb_
+
+ out_free:
+ kfree(buf);
+-out:
+ return err;
+ }
+
+ static void ssb_pci_get_boardinfo(struct ssb_bus *bus,
+ struct ssb_boardinfo *bi)
+ {
+- pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_VENDOR_ID,
+- &bi->vendor);
+- pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_ID,
+- &bi->type);
+- pci_read_config_word(bus->host_pci, PCI_REVISION_ID,
+- &bi->rev);
++ bi->vendor = bus->host_pci->subsystem_vendor;
++ bi->type = bus->host_pci->subsystem_device;
++ bi->rev = bus->host_pci->revision;
+ }
+
+ int ssb_pci_get_invariants(struct ssb_bus *bus,
+--- a/drivers/ssb/pcihost_wrapper.c
++++ b/drivers/ssb/pcihost_wrapper.c
+@@ -6,12 +6,13 @@
+ * Copyright (c) 2005 Stefano Brivio <st3@riseup.net>
+ * Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org>
+ * Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>
+- * Copyright (c) 2005-2007 Michael Buesch <mbuesch@freenet.de>
++ * Copyright (c) 2005-2007 Michael Buesch <m@bues.ch>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+ #include <linux/pci.h>
++#include <linux/slab.h>
+ #include <linux/ssb/ssb.h>
+
+
+@@ -52,12 +53,13 @@ static int ssb_pcihost_resume(struct pci
+ # define ssb_pcihost_resume NULL
+ #endif /* CONFIG_PM */
+
+-static int ssb_pcihost_probe(struct pci_dev *dev,
+- const struct pci_device_id *id)
++static int __devinit ssb_pcihost_probe(struct pci_dev *dev,
++ const struct pci_device_id *id)
+ {
+ struct ssb_bus *ssb;
+ int err = -ENOMEM;
+ const char *name;
++ u32 val;
+
+ ssb = kzalloc(sizeof(*ssb), GFP_KERNEL);
+ if (!ssb)
+@@ -73,6 +75,12 @@ static int ssb_pcihost_probe(struct pci_
+ goto err_pci_disable;
+ pci_set_master(dev);
+
++ /* Disable the RETRY_TIMEOUT register (0x41) to keep
++ * PCI Tx retries from interfering with C3 CPU state */
++ pci_read_config_dword(dev, 0x40, &val);
++ if ((val & 0x0000ff00) != 0)
++ pci_write_config_dword(dev, 0x40, val & 0xffff00ff);
++
+ err = ssb_bus_pcibus_register(ssb, dev);
+ if (err)
+ goto err_pci_release_regions;
+@@ -102,7 +110,7 @@ static void ssb_pcihost_remove(struct pc
+ pci_set_drvdata(dev, NULL);
+ }
+
+-int ssb_pcihost_register(struct pci_driver *driver)
++int __devinit ssb_pcihost_register(struct pci_driver *driver)
+ {
+ driver->probe = ssb_pcihost_probe;
+ driver->remove = ssb_pcihost_remove;
+--- a/drivers/ssb/pcmcia.c
++++ b/drivers/ssb/pcmcia.c
+@@ -3,7 +3,7 @@
+ * PCMCIA-Hostbus related functions
+ *
+ * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
+- * Copyright 2007-2008 Michael Buesch <mb@bu3sch.de>
++ * Copyright 2007-2008 Michael Buesch <m@bues.ch>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+@@ -617,136 +617,140 @@ static int ssb_pcmcia_sprom_check_crc(co
+ } \
+ } while (0)
+
+-int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
+- struct ssb_init_invariants *iv)
++static int ssb_pcmcia_get_mac(struct pcmcia_device *p_dev,
++ tuple_t *tuple,
++ void *priv)
++{
++ struct ssb_sprom *sprom = priv;
++
++ if (tuple->TupleData[0] != CISTPL_FUNCE_LAN_NODE_ID)
++ return -EINVAL;
++ if (tuple->TupleDataLen != ETH_ALEN + 2)
++ return -EINVAL;
++ if (tuple->TupleData[1] != ETH_ALEN)
++ return -EINVAL;
++ memcpy(sprom->il0mac, &tuple->TupleData[2], ETH_ALEN);
++ return 0;
++};
++
++static int ssb_pcmcia_do_get_invariants(struct pcmcia_device *p_dev,
++ tuple_t *tuple,
++ void *priv)
+ {
+- tuple_t tuple;
+- int res;
+- unsigned char buf[32];
++ struct ssb_init_invariants *iv = priv;
+ struct ssb_sprom *sprom = &iv->sprom;
+ struct ssb_boardinfo *bi = &iv->boardinfo;
+ const char *error_description;
+
++ GOTO_ERROR_ON(tuple->TupleDataLen < 1, "VEN tpl < 1");
++ switch (tuple->TupleData[0]) {
++ case SSB_PCMCIA_CIS_ID:
++ GOTO_ERROR_ON((tuple->TupleDataLen != 5) &&
++ (tuple->TupleDataLen != 7),
++ "id tpl size");
++ bi->vendor = tuple->TupleData[1] |
++ ((u16)tuple->TupleData[2] << 8);
++ break;
++ case SSB_PCMCIA_CIS_BOARDREV:
++ GOTO_ERROR_ON(tuple->TupleDataLen != 2,
++ "boardrev tpl size");
++ sprom->board_rev = tuple->TupleData[1];
++ break;
++ case SSB_PCMCIA_CIS_PA:
++ GOTO_ERROR_ON((tuple->TupleDataLen != 9) &&
++ (tuple->TupleDataLen != 10),
++ "pa tpl size");
++ sprom->pa0b0 = tuple->TupleData[1] |
++ ((u16)tuple->TupleData[2] << 8);
++ sprom->pa0b1 = tuple->TupleData[3] |
++ ((u16)tuple->TupleData[4] << 8);
++ sprom->pa0b2 = tuple->TupleData[5] |
++ ((u16)tuple->TupleData[6] << 8);
++ sprom->itssi_a = tuple->TupleData[7];
++ sprom->itssi_bg = tuple->TupleData[7];
++ sprom->maxpwr_a = tuple->TupleData[8];
++ sprom->maxpwr_bg = tuple->TupleData[8];
++ break;
++ case SSB_PCMCIA_CIS_OEMNAME:
++ /* We ignore this. */
++ break;
++ case SSB_PCMCIA_CIS_CCODE:
++ GOTO_ERROR_ON(tuple->TupleDataLen != 2,
++ "ccode tpl size");
++ sprom->country_code = tuple->TupleData[1];
++ break;
++ case SSB_PCMCIA_CIS_ANTENNA:
++ GOTO_ERROR_ON(tuple->TupleDataLen != 2,
++ "ant tpl size");
++ sprom->ant_available_a = tuple->TupleData[1];
++ sprom->ant_available_bg = tuple->TupleData[1];
++ break;
++ case SSB_PCMCIA_CIS_ANTGAIN:
++ GOTO_ERROR_ON(tuple->TupleDataLen != 2,
++ "antg tpl size");
++ sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1];
++ sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1];
++ sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1];
++ sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1];
++ sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1];
++ sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1];
++ sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1];
++ sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1];
++ break;
++ case SSB_PCMCIA_CIS_BFLAGS:
++ GOTO_ERROR_ON((tuple->TupleDataLen != 3) &&
++ (tuple->TupleDataLen != 5),
++ "bfl tpl size");
++ sprom->boardflags_lo = tuple->TupleData[1] |
++ ((u16)tuple->TupleData[2] << 8);
++ break;
++ case SSB_PCMCIA_CIS_LEDS:
++ GOTO_ERROR_ON(tuple->TupleDataLen != 5,
++ "leds tpl size");
++ sprom->gpio0 = tuple->TupleData[1];
++ sprom->gpio1 = tuple->TupleData[2];
++ sprom->gpio2 = tuple->TupleData[3];
++ sprom->gpio3 = tuple->TupleData[4];
++ break;
++ }
++ return -ENOSPC; /* continue with next entry */
++
++error:
++ ssb_printk(KERN_ERR PFX
++ "PCMCIA: Failed to fetch device invariants: %s\n",
++ error_description);
++ return -ENODEV;
++}
++
++
++int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
++ struct ssb_init_invariants *iv)
++{
++ struct ssb_sprom *sprom = &iv->sprom;
++ int res;
++
+ memset(sprom, 0xFF, sizeof(*sprom));
+ sprom->revision = 1;
+ sprom->boardflags_lo = 0;
+ sprom->boardflags_hi = 0;
+
+ /* First fetch the MAC address. */
+- memset(&tuple, 0, sizeof(tuple));
+- tuple.DesiredTuple = CISTPL_FUNCE;
+- tuple.TupleData = buf;
+- tuple.TupleDataMax = sizeof(buf);
+- res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple);
+- GOTO_ERROR_ON(res != 0, "MAC first tpl");
+- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
+- GOTO_ERROR_ON(res != 0, "MAC first tpl data");
+- while (1) {
+- GOTO_ERROR_ON(tuple.TupleDataLen < 1, "MAC tpl < 1");
+- if (tuple.TupleData[0] == CISTPL_FUNCE_LAN_NODE_ID)
+- break;
+- res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple);
+- GOTO_ERROR_ON(res != 0, "MAC next tpl");
+- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
+- GOTO_ERROR_ON(res != 0, "MAC next tpl data");
++ res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE,
++ ssb_pcmcia_get_mac, sprom);
++ if (res != 0) {
++ ssb_printk(KERN_ERR PFX
++ "PCMCIA: Failed to fetch MAC address\n");
++ return -ENODEV;
+ }
+- GOTO_ERROR_ON(tuple.TupleDataLen != ETH_ALEN + 2, "MAC tpl size");
+- memcpy(sprom->il0mac, &tuple.TupleData[2], ETH_ALEN);
+
+ /* Fetch the vendor specific tuples. */
+- memset(&tuple, 0, sizeof(tuple));
+- tuple.DesiredTuple = SSB_PCMCIA_CIS;
+- tuple.TupleData = buf;
+- tuple.TupleDataMax = sizeof(buf);
+- res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple);
+- GOTO_ERROR_ON(res != 0, "VEN first tpl");
+- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
+- GOTO_ERROR_ON(res != 0, "VEN first tpl data");
+- while (1) {
+- GOTO_ERROR_ON(tuple.TupleDataLen < 1, "VEN tpl < 1");
+- switch (tuple.TupleData[0]) {
+- case SSB_PCMCIA_CIS_ID:
+- GOTO_ERROR_ON((tuple.TupleDataLen != 5) &&
+- (tuple.TupleDataLen != 7),
+- "id tpl size");
+- bi->vendor = tuple.TupleData[1] |
+- ((u16)tuple.TupleData[2] << 8);
+- break;
+- case SSB_PCMCIA_CIS_BOARDREV:
+- GOTO_ERROR_ON(tuple.TupleDataLen != 2,
+- "boardrev tpl size");
+- sprom->board_rev = tuple.TupleData[1];
+- break;
+- case SSB_PCMCIA_CIS_PA:
+- GOTO_ERROR_ON((tuple.TupleDataLen != 9) &&
+- (tuple.TupleDataLen != 10),
+- "pa tpl size");
+- sprom->pa0b0 = tuple.TupleData[1] |
+- ((u16)tuple.TupleData[2] << 8);
+- sprom->pa0b1 = tuple.TupleData[3] |
+- ((u16)tuple.TupleData[4] << 8);
+- sprom->pa0b2 = tuple.TupleData[5] |
+- ((u16)tuple.TupleData[6] << 8);
+- sprom->itssi_a = tuple.TupleData[7];
+- sprom->itssi_bg = tuple.TupleData[7];
+- sprom->maxpwr_a = tuple.TupleData[8];
+- sprom->maxpwr_bg = tuple.TupleData[8];
+- break;
+- case SSB_PCMCIA_CIS_OEMNAME:
+- /* We ignore this. */
+- break;
+- case SSB_PCMCIA_CIS_CCODE:
+- GOTO_ERROR_ON(tuple.TupleDataLen != 2,
+- "ccode tpl size");
+- sprom->country_code = tuple.TupleData[1];
+- break;
+- case SSB_PCMCIA_CIS_ANTENNA:
+- GOTO_ERROR_ON(tuple.TupleDataLen != 2,
+- "ant tpl size");
+- sprom->ant_available_a = tuple.TupleData[1];
+- sprom->ant_available_bg = tuple.TupleData[1];
+- break;
+- case SSB_PCMCIA_CIS_ANTGAIN:
+- GOTO_ERROR_ON(tuple.TupleDataLen != 2,
+- "antg tpl size");
+- sprom->antenna_gain.ghz24.a0 = tuple.TupleData[1];
+- sprom->antenna_gain.ghz24.a1 = tuple.TupleData[1];
+- sprom->antenna_gain.ghz24.a2 = tuple.TupleData[1];
+- sprom->antenna_gain.ghz24.a3 = tuple.TupleData[1];
+- sprom->antenna_gain.ghz5.a0 = tuple.TupleData[1];
+- sprom->antenna_gain.ghz5.a1 = tuple.TupleData[1];
+- sprom->antenna_gain.ghz5.a2 = tuple.TupleData[1];
+- sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1];
+- break;
+- case SSB_PCMCIA_CIS_BFLAGS:
+- GOTO_ERROR_ON((tuple.TupleDataLen != 3) &&
+- (tuple.TupleDataLen != 5),
+- "bfl tpl size");
+- sprom->boardflags_lo = tuple.TupleData[1] |
+- ((u16)tuple.TupleData[2] << 8);
+- break;
+- case SSB_PCMCIA_CIS_LEDS:
+- GOTO_ERROR_ON(tuple.TupleDataLen != 5,
+- "leds tpl size");
+- sprom->gpio0 = tuple.TupleData[1];
+- sprom->gpio1 = tuple.TupleData[2];
+- sprom->gpio2 = tuple.TupleData[3];
+- sprom->gpio3 = tuple.TupleData[4];
+- break;
+- }
+- res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple);
+- if (res == -ENOSPC)
+- break;
+- GOTO_ERROR_ON(res != 0, "VEN next tpl");
+- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
+- GOTO_ERROR_ON(res != 0, "VEN next tpl data");
+- }
++ res = pcmcia_loop_tuple(bus->host_pcmcia, SSB_PCMCIA_CIS,
++ ssb_pcmcia_do_get_invariants, iv);
++ if ((res == 0) || (res == -ENOSPC))
++ return 0;
+
+- return 0;
+-error:
+ ssb_printk(KERN_ERR PFX
+- "PCMCIA: Failed to fetch device invariants: %s\n",
+- error_description);
++ "PCMCIA: Failed to fetch device invariants\n");
+ return -ENODEV;
+ }
+
+--- a/drivers/ssb/scan.c
++++ b/drivers/ssb/scan.c
+@@ -2,7 +2,7 @@
+ * Sonics Silicon Backplane
+ * Bus scanning
+ *
+- * Copyright (C) 2005-2007 Michael Buesch <mb@bu3sch.de>
++ * Copyright (C) 2005-2007 Michael Buesch <m@bues.ch>
+ * Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
+ * Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
+ * Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
+@@ -162,6 +162,8 @@ static u8 chipid_to_nrcores(u16 chipid)
+ static u32 scan_read32(struct ssb_bus *bus, u8 current_coreidx,
+ u16 offset)
+ {
++ u32 lo, hi;
++
+ switch (bus->bustype) {
+ case SSB_BUSTYPE_SSB:
+ offset += current_coreidx * SSB_CORE_SIZE;
+@@ -174,7 +176,12 @@ static u32 scan_read32(struct ssb_bus *b
+ offset -= 0x800;
+ } else
+ ssb_pcmcia_switch_segment(bus, 0);
+- break;
++ lo = readw(bus->mmio + offset);
++ hi = readw(bus->mmio + offset + 2);
++ return lo | (hi << 16);
++ case SSB_BUSTYPE_SDIO:
++ offset += current_coreidx * SSB_CORE_SIZE;
++ return ssb_sdio_scan_read32(bus, offset);
+ }
+ return readl(bus->mmio + offset);
+ }
+@@ -188,6 +195,8 @@ static int scan_switchcore(struct ssb_bu
+ return ssb_pci_switch_coreidx(bus, coreidx);
+ case SSB_BUSTYPE_PCMCIA:
+ return ssb_pcmcia_switch_coreidx(bus, coreidx);
++ case SSB_BUSTYPE_SDIO:
++ return ssb_sdio_scan_switch_coreidx(bus, coreidx);
+ }
+ return 0;
+ }
+@@ -206,6 +215,8 @@ void ssb_iounmap(struct ssb_bus *bus)
+ SSB_BUG_ON(1); /* Can't reach this code. */
+ #endif
+ break;
++ case SSB_BUSTYPE_SDIO:
++ break;
+ }
+ bus->mmio = NULL;
+ bus->mapped_device = NULL;
+@@ -230,6 +241,10 @@ static void __iomem *ssb_ioremap(struct
+ SSB_BUG_ON(1); /* Can't reach this code. */
+ #endif
+ break;
++ case SSB_BUSTYPE_SDIO:
++ /* Nothing to ioremap in the SDIO case, just fake it */
++ mmio = (void __iomem *)baseaddr;
++ break;
+ }
+
+ return mmio;
+@@ -245,7 +260,10 @@ static int we_support_multiple_80211_cor
+ #ifdef CONFIG_SSB_PCIHOST
+ if (bus->bustype == SSB_BUSTYPE_PCI) {
+ if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM &&
+- bus->host_pci->device == 0x4324)
++ ((bus->host_pci->device == 0x4313) ||
++ (bus->host_pci->device == 0x431A) ||
++ (bus->host_pci->device == 0x4321) ||
++ (bus->host_pci->device == 0x4324)))
+ return 1;
+ }
+ #endif /* CONFIG_SSB_PCIHOST */
+@@ -294,8 +312,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ } else {
+ if (bus->bustype == SSB_BUSTYPE_PCI) {
+ bus->chip_id = pcidev_to_chipid(bus->host_pci);
+- pci_read_config_word(bus->host_pci, PCI_REVISION_ID,
+- &bus->chip_rev);
++ bus->chip_rev = bus->host_pci->revision;
+ bus->chip_package = 0;
+ } else {
+ bus->chip_id = 0x4710;
+@@ -339,7 +356,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ dev->bus = bus;
+ dev->ops = bus->ops;
+
+- ssb_dprintk(KERN_INFO PFX
++ printk(KERN_DEBUG PFX
+ "Core %d found: %s "
+ "(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n",
+ i, ssb_core_name(dev->id.coreid),
+@@ -407,6 +424,16 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ bus->pcicore.dev = dev;
+ #endif /* CONFIG_SSB_DRIVER_PCICORE */
+ break;
++ case SSB_DEV_ETHERNET:
++ if (bus->bustype == SSB_BUSTYPE_PCI) {
++ if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM &&
++ (bus->host_pci->device & 0xFF00) == 0x4300) {
++ /* This is a dangling ethernet core on a
++ * wireless device. Ignore it. */
++ continue;
++ }
++ }
++ break;
+ default:
+ break;
+ }
+--- /dev/null
++++ b/drivers/ssb/sdio.c
+@@ -0,0 +1,610 @@
++/*
++ * Sonics Silicon Backplane
++ * SDIO-Hostbus related functions
++ *
++ * Copyright 2009 Albert Herranz <albert_herranz@yahoo.es>
++ *
++ * Based on drivers/ssb/pcmcia.c
++ * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
++ * Copyright 2007-2008 Michael Buesch <m@bues.ch>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ *
++ */
++
++#include <linux/ssb/ssb.h>
++#include <linux/delay.h>
++#include <linux/io.h>
++#include <linux/etherdevice.h>
++#include <linux/mmc/sdio_func.h>
++
++#include "ssb_private.h"
++
++/* Define the following to 1 to enable a printk on each coreswitch. */
++#define SSB_VERBOSE_SDIOCORESWITCH_DEBUG 0
++
++
++/* Hardware invariants CIS tuples */
++#define SSB_SDIO_CIS 0x80
++#define SSB_SDIO_CIS_SROMREV 0x00
++#define SSB_SDIO_CIS_ID 0x01
++#define SSB_SDIO_CIS_BOARDREV 0x02
++#define SSB_SDIO_CIS_PA 0x03
++#define SSB_SDIO_CIS_PA_PA0B0_LO 0
++#define SSB_SDIO_CIS_PA_PA0B0_HI 1
++#define SSB_SDIO_CIS_PA_PA0B1_LO 2
++#define SSB_SDIO_CIS_PA_PA0B1_HI 3
++#define SSB_SDIO_CIS_PA_PA0B2_LO 4
++#define SSB_SDIO_CIS_PA_PA0B2_HI 5
++#define SSB_SDIO_CIS_PA_ITSSI 6
++#define SSB_SDIO_CIS_PA_MAXPOW 7
++#define SSB_SDIO_CIS_OEMNAME 0x04
++#define SSB_SDIO_CIS_CCODE 0x05
++#define SSB_SDIO_CIS_ANTENNA 0x06
++#define SSB_SDIO_CIS_ANTGAIN 0x07
++#define SSB_SDIO_CIS_BFLAGS 0x08
++#define SSB_SDIO_CIS_LEDS 0x09
++
++#define CISTPL_FUNCE_LAN_NODE_ID 0x04 /* same as in PCMCIA */
++
++
++/*
++ * Function 1 miscellaneous registers.
++ *
++ * Definitions match src/include/sbsdio.h from the
++ * Android Open Source Project
++ * http://android.git.kernel.org/?p=platform/system/wlan/broadcom.git
++ *
++ */
++#define SBSDIO_FUNC1_SBADDRLOW 0x1000a /* SB Address window Low (b15) */
++#define SBSDIO_FUNC1_SBADDRMID 0x1000b /* SB Address window Mid (b23-b16) */
++#define SBSDIO_FUNC1_SBADDRHIGH 0x1000c /* SB Address window High (b24-b31) */
++
++/* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */
++#define SBSDIO_SBADDRLOW_MASK 0x80 /* Valid address bits in SBADDRLOW */
++#define SBSDIO_SBADDRMID_MASK 0xff /* Valid address bits in SBADDRMID */
++#define SBSDIO_SBADDRHIGH_MASK 0xff /* Valid address bits in SBADDRHIGH */
++
++#define SBSDIO_SB_OFT_ADDR_MASK 0x7FFF /* sb offset addr is <= 15 bits, 32k */
++
++/* REVISIT: this flag doesn't seem to matter */
++#define SBSDIO_SB_ACCESS_2_4B_FLAG 0x8000 /* forces 32-bit SB access */
++
++
++/*
++ * Address map within the SDIO function address space (128K).
++ *
++ * Start End Description
++ * ------- ------- ------------------------------------------
++ * 0x00000 0x0ffff selected backplane address window (64K)
++ * 0x10000 0x1ffff backplane control registers (max 64K)
++ *
++ * The current address window is configured by writing to registers
++ * SBADDRLOW, SBADDRMID and SBADDRHIGH.
++ *
++ * In order to access the contents of a 32-bit Silicon Backplane address
++ * the backplane address window must be first loaded with the highest
++ * 16 bits of the target address. Then, an access must be done to the
++ * SDIO function address space using the lower 15 bits of the address.
++ * Bit 15 of the address must be set when doing 32 bit accesses.
++ *
++ * 10987654321098765432109876543210
++ * WWWWWWWWWWWWWWWWW SB Address Window
++ * OOOOOOOOOOOOOOOO Offset within SB Address Window
++ * a 32-bit access flag
++ */
++
++
++/*
++ * SSB I/O via SDIO.
++ *
++ * NOTE: SDIO address @addr is 17 bits long (SDIO address space is 128K).
++ */
++
++static inline struct device *ssb_sdio_dev(struct ssb_bus *bus)
++{
++ return &bus->host_sdio->dev;
++}
++
++/* host claimed */
++static int ssb_sdio_writeb(struct ssb_bus *bus, unsigned int addr, u8 val)
++{
++ int error = 0;
++
++ sdio_writeb(bus->host_sdio, val, addr, &error);
++ if (unlikely(error)) {
++ dev_dbg(ssb_sdio_dev(bus), "%08X <- %02x, error %d\n",
++ addr, val, error);
++ }
++
++ return error;
++}
++
++#if 0
++static u8 ssb_sdio_readb(struct ssb_bus *bus, unsigned int addr)
++{
++ u8 val;
++ int error = 0;
++
++ val = sdio_readb(bus->host_sdio, addr, &error);
++ if (unlikely(error)) {
++ dev_dbg(ssb_sdio_dev(bus), "%08X -> %02x, error %d\n",
++ addr, val, error);
++ }
++
++ return val;
++}
++#endif
++
++/* host claimed */
++static int ssb_sdio_set_sbaddr_window(struct ssb_bus *bus, u32 address)
++{
++ int error;
++
++ error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRLOW,
++ (address >> 8) & SBSDIO_SBADDRLOW_MASK);
++ if (error)
++ goto out;
++ error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRMID,
++ (address >> 16) & SBSDIO_SBADDRMID_MASK);
++ if (error)
++ goto out;
++ error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRHIGH,
++ (address >> 24) & SBSDIO_SBADDRHIGH_MASK);
++ if (error)
++ goto out;
++ bus->sdio_sbaddr = address;
++out:
++ if (error) {
++ dev_dbg(ssb_sdio_dev(bus), "failed to set address window"
++ " to 0x%08x, error %d\n", address, error);
++ }
++
++ return error;
++}
++
++/* for enumeration use only */
++u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset)
++{
++ u32 val;
++ int error;
++
++ sdio_claim_host(bus->host_sdio);
++ val = sdio_readl(bus->host_sdio, offset, &error);
++ sdio_release_host(bus->host_sdio);
++ if (unlikely(error)) {
++ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %08x, error %d\n",
++ bus->sdio_sbaddr >> 16, offset, val, error);
++ }
++
++ return val;
++}
++
++/* for enumeration use only */
++int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx)
++{
++ u32 sbaddr;
++ int error;
++
++ sbaddr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE;
++ sdio_claim_host(bus->host_sdio);
++ error = ssb_sdio_set_sbaddr_window(bus, sbaddr);
++ sdio_release_host(bus->host_sdio);
++ if (error) {
++ dev_err(ssb_sdio_dev(bus), "failed to switch to core %u,"
++ " error %d\n", coreidx, error);
++ goto out;
++ }
++out:
++ return error;
++}
++
++/* host must be already claimed */
++int ssb_sdio_switch_core(struct ssb_bus *bus, struct ssb_device *dev)
++{
++ u8 coreidx = dev->core_index;
++ u32 sbaddr;
++ int error = 0;
++
++ sbaddr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE;
++ if (unlikely(bus->sdio_sbaddr != sbaddr)) {
++#if SSB_VERBOSE_SDIOCORESWITCH_DEBUG
++ dev_info(ssb_sdio_dev(bus),
++ "switching to %s core, index %d\n",
++ ssb_core_name(dev->id.coreid), coreidx);
++#endif
++ error = ssb_sdio_set_sbaddr_window(bus, sbaddr);
++ if (error) {
++ dev_dbg(ssb_sdio_dev(bus), "failed to switch to"
++ " core %u, error %d\n", coreidx, error);
++ goto out;
++ }
++ bus->mapped_device = dev;
++ }
++
++out:
++ return error;
++}
++
++static u8 ssb_sdio_read8(struct ssb_device *dev, u16 offset)
++{
++ struct ssb_bus *bus = dev->bus;
++ u8 val = 0xff;
++ int error = 0;
++
++ sdio_claim_host(bus->host_sdio);
++ if (unlikely(ssb_sdio_switch_core(bus, dev)))
++ goto out;
++ offset |= bus->sdio_sbaddr & 0xffff;
++ offset &= SBSDIO_SB_OFT_ADDR_MASK;
++ val = sdio_readb(bus->host_sdio, offset, &error);
++ if (error) {
++ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %02x, error %d\n",
++ bus->sdio_sbaddr >> 16, offset, val, error);
++ }
++out:
++ sdio_release_host(bus->host_sdio);
++
++ return val;
++}
++
++static u16 ssb_sdio_read16(struct ssb_device *dev, u16 offset)
++{
++ struct ssb_bus *bus = dev->bus;
++ u16 val = 0xffff;
++ int error = 0;
++
++ sdio_claim_host(bus->host_sdio);
++ if (unlikely(ssb_sdio_switch_core(bus, dev)))
++ goto out;
++ offset |= bus->sdio_sbaddr & 0xffff;
++ offset &= SBSDIO_SB_OFT_ADDR_MASK;
++ val = sdio_readw(bus->host_sdio, offset, &error);
++ if (error) {
++ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %04x, error %d\n",
++ bus->sdio_sbaddr >> 16, offset, val, error);
++ }
++out:
++ sdio_release_host(bus->host_sdio);
++
++ return val;
++}
++
++static u32 ssb_sdio_read32(struct ssb_device *dev, u16 offset)
++{
++ struct ssb_bus *bus = dev->bus;
++ u32 val = 0xffffffff;
++ int error = 0;
++
++ sdio_claim_host(bus->host_sdio);
++ if (unlikely(ssb_sdio_switch_core(bus, dev)))
++ goto out;
++ offset |= bus->sdio_sbaddr & 0xffff;
++ offset &= SBSDIO_SB_OFT_ADDR_MASK;
++ offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
++ val = sdio_readl(bus->host_sdio, offset, &error);
++ if (error) {
++ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %08x, error %d\n",
++ bus->sdio_sbaddr >> 16, offset, val, error);
++ }
++out:
++ sdio_release_host(bus->host_sdio);
++
++ return val;
++}
++
++#ifdef CONFIG_SSB_BLOCKIO
++static void ssb_sdio_block_read(struct ssb_device *dev, void *buffer,
++ size_t count, u16 offset, u8 reg_width)
++{
++ size_t saved_count = count;
++ struct ssb_bus *bus = dev->bus;
++ int error = 0;
++
++ sdio_claim_host(bus->host_sdio);
++ if (unlikely(ssb_sdio_switch_core(bus, dev))) {
++ error = -EIO;
++ memset(buffer, 0xff, count);
++ goto err_out;
++ }
++ offset |= bus->sdio_sbaddr & 0xffff;
++ offset &= SBSDIO_SB_OFT_ADDR_MASK;
++
++ switch (reg_width) {
++ case sizeof(u8): {
++ error = sdio_readsb(bus->host_sdio, buffer, offset, count);
++ break;
++ }
++ case sizeof(u16): {
++ SSB_WARN_ON(count & 1);
++ error = sdio_readsb(bus->host_sdio, buffer, offset, count);
++ break;
++ }
++ case sizeof(u32): {
++ SSB_WARN_ON(count & 3);
++ offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
++ error = sdio_readsb(bus->host_sdio, buffer, offset, count);
++ break;
++ }
++ default:
++ SSB_WARN_ON(1);
++ }
++ if (!error)
++ goto out;
++
++err_out:
++ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%zu), error %d\n",
++ bus->sdio_sbaddr >> 16, offset, reg_width, saved_count, error);
++out:
++ sdio_release_host(bus->host_sdio);
++}
++#endif /* CONFIG_SSB_BLOCKIO */
++
++static void ssb_sdio_write8(struct ssb_device *dev, u16 offset, u8 val)
++{
++ struct ssb_bus *bus = dev->bus;
++ int error = 0;
++
++ sdio_claim_host(bus->host_sdio);
++ if (unlikely(ssb_sdio_switch_core(bus, dev)))
++ goto out;
++ offset |= bus->sdio_sbaddr & 0xffff;
++ offset &= SBSDIO_SB_OFT_ADDR_MASK;
++ sdio_writeb(bus->host_sdio, val, offset, &error);
++ if (error) {
++ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %02x, error %d\n",
++ bus->sdio_sbaddr >> 16, offset, val, error);
++ }
++out:
++ sdio_release_host(bus->host_sdio);
++}
++
++static void ssb_sdio_write16(struct ssb_device *dev, u16 offset, u16 val)
++{
++ struct ssb_bus *bus = dev->bus;
++ int error = 0;
++
++ sdio_claim_host(bus->host_sdio);
++ if (unlikely(ssb_sdio_switch_core(bus, dev)))
++ goto out;
++ offset |= bus->sdio_sbaddr & 0xffff;
++ offset &= SBSDIO_SB_OFT_ADDR_MASK;
++ sdio_writew(bus->host_sdio, val, offset, &error);
++ if (error) {
++ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %04x, error %d\n",
++ bus->sdio_sbaddr >> 16, offset, val, error);
++ }
++out:
++ sdio_release_host(bus->host_sdio);
++}
++
++static void ssb_sdio_write32(struct ssb_device *dev, u16 offset, u32 val)
++{
++ struct ssb_bus *bus = dev->bus;
++ int error = 0;
++
++ sdio_claim_host(bus->host_sdio);
++ if (unlikely(ssb_sdio_switch_core(bus, dev)))
++ goto out;
++ offset |= bus->sdio_sbaddr & 0xffff;
++ offset &= SBSDIO_SB_OFT_ADDR_MASK;
++ offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
++ sdio_writel(bus->host_sdio, val, offset, &error);
++ if (error) {
++ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %08x, error %d\n",
++ bus->sdio_sbaddr >> 16, offset, val, error);
++ }
++ if (bus->quirks & SSB_QUIRK_SDIO_READ_AFTER_WRITE32)
++ sdio_readl(bus->host_sdio, 0, &error);
++out:
++ sdio_release_host(bus->host_sdio);
++}
++
++#ifdef CONFIG_SSB_BLOCKIO
++static void ssb_sdio_block_write(struct ssb_device *dev, const void *buffer,
++ size_t count, u16 offset, u8 reg_width)
++{
++ size_t saved_count = count;
++ struct ssb_bus *bus = dev->bus;
++ int error = 0;
++
++ sdio_claim_host(bus->host_sdio);
++ if (unlikely(ssb_sdio_switch_core(bus, dev))) {
++ error = -EIO;
++ memset((void *)buffer, 0xff, count);
++ goto err_out;
++ }
++ offset |= bus->sdio_sbaddr & 0xffff;
++ offset &= SBSDIO_SB_OFT_ADDR_MASK;
++
++ switch (reg_width) {
++ case sizeof(u8):
++ error = sdio_writesb(bus->host_sdio, offset,
++ (void *)buffer, count);
++ break;
++ case sizeof(u16):
++ SSB_WARN_ON(count & 1);
++ error = sdio_writesb(bus->host_sdio, offset,
++ (void *)buffer, count);
++ break;
++ case sizeof(u32):
++ SSB_WARN_ON(count & 3);
++ offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
++ error = sdio_writesb(bus->host_sdio, offset,
++ (void *)buffer, count);
++ break;
++ default:
++ SSB_WARN_ON(1);
++ }
++ if (!error)
++ goto out;
++
++err_out:
++ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%zu), error %d\n",
++ bus->sdio_sbaddr >> 16, offset, reg_width, saved_count, error);
++out:
++ sdio_release_host(bus->host_sdio);
++}
++
++#endif /* CONFIG_SSB_BLOCKIO */
++
++/* Not "static", as it's used in main.c */
++const struct ssb_bus_ops ssb_sdio_ops = {
++ .read8 = ssb_sdio_read8,
++ .read16 = ssb_sdio_read16,
++ .read32 = ssb_sdio_read32,
++ .write8 = ssb_sdio_write8,
++ .write16 = ssb_sdio_write16,
++ .write32 = ssb_sdio_write32,
++#ifdef CONFIG_SSB_BLOCKIO
++ .block_read = ssb_sdio_block_read,
++ .block_write = ssb_sdio_block_write,
++#endif
++};
++
++#define GOTO_ERROR_ON(condition, description) do { \
++ if (unlikely(condition)) { \
++ error_description = description; \
++ goto error; \
++ } \
++ } while (0)
++
++int ssb_sdio_get_invariants(struct ssb_bus *bus,
++ struct ssb_init_invariants *iv)
++{
++ struct ssb_sprom *sprom = &iv->sprom;
++ struct ssb_boardinfo *bi = &iv->boardinfo;
++ const char *error_description = "none";
++ struct sdio_func_tuple *tuple;
++ void *mac;
++
++ memset(sprom, 0xFF, sizeof(*sprom));
++ sprom->boardflags_lo = 0;
++ sprom->boardflags_hi = 0;
++
++ tuple = bus->host_sdio->tuples;
++ while (tuple) {
++ switch (tuple->code) {
++ case 0x22: /* extended function */
++ switch (tuple->data[0]) {
++ case CISTPL_FUNCE_LAN_NODE_ID:
++ GOTO_ERROR_ON((tuple->size != 7) &&
++ (tuple->data[1] != 6),
++ "mac tpl size");
++ /* fetch the MAC address. */
++ mac = tuple->data + 2;
++ memcpy(sprom->il0mac, mac, ETH_ALEN);
++ memcpy(sprom->et1mac, mac, ETH_ALEN);
++ break;
++ default:
++ break;
++ }
++ break;
++ case 0x80: /* vendor specific tuple */
++ switch (tuple->data[0]) {
++ case SSB_SDIO_CIS_SROMREV:
++ GOTO_ERROR_ON(tuple->size != 2,
++ "sromrev tpl size");
++ sprom->revision = tuple->data[1];
++ break;
++ case SSB_SDIO_CIS_ID:
++ GOTO_ERROR_ON((tuple->size != 5) &&
++ (tuple->size != 7),
++ "id tpl size");
++ bi->vendor = tuple->data[1] |
++ (tuple->data[2]<<8);
++ break;
++ case SSB_SDIO_CIS_BOARDREV:
++ GOTO_ERROR_ON(tuple->size != 2,
++ "boardrev tpl size");
++ sprom->board_rev = tuple->data[1];
++ break;
++ case SSB_SDIO_CIS_PA:
++ GOTO_ERROR_ON((tuple->size != 9) &&
++ (tuple->size != 10),
++ "pa tpl size");
++ sprom->pa0b0 = tuple->data[1] |
++ ((u16)tuple->data[2] << 8);
++ sprom->pa0b1 = tuple->data[3] |
++ ((u16)tuple->data[4] << 8);
++ sprom->pa0b2 = tuple->data[5] |
++ ((u16)tuple->data[6] << 8);
++ sprom->itssi_a = tuple->data[7];
++ sprom->itssi_bg = tuple->data[7];
++ sprom->maxpwr_a = tuple->data[8];
++ sprom->maxpwr_bg = tuple->data[8];
++ break;
++ case SSB_SDIO_CIS_OEMNAME:
++ /* Not present */
++ break;
++ case SSB_SDIO_CIS_CCODE:
++ GOTO_ERROR_ON(tuple->size != 2,
++ "ccode tpl size");
++ sprom->country_code = tuple->data[1];
++ break;
++ case SSB_SDIO_CIS_ANTENNA:
++ GOTO_ERROR_ON(tuple->size != 2,
++ "ant tpl size");
++ sprom->ant_available_a = tuple->data[1];
++ sprom->ant_available_bg = tuple->data[1];
++ break;
++ case SSB_SDIO_CIS_ANTGAIN:
++ GOTO_ERROR_ON(tuple->size != 2,
++ "antg tpl size");
++ sprom->antenna_gain.ghz24.a0 = tuple->data[1];
++ sprom->antenna_gain.ghz24.a1 = tuple->data[1];
++ sprom->antenna_gain.ghz24.a2 = tuple->data[1];
++ sprom->antenna_gain.ghz24.a3 = tuple->data[1];
++ sprom->antenna_gain.ghz5.a0 = tuple->data[1];
++ sprom->antenna_gain.ghz5.a1 = tuple->data[1];
++ sprom->antenna_gain.ghz5.a2 = tuple->data[1];
++ sprom->antenna_gain.ghz5.a3 = tuple->data[1];
++ break;
++ case SSB_SDIO_CIS_BFLAGS:
++ GOTO_ERROR_ON((tuple->size != 3) &&
++ (tuple->size != 5),
++ "bfl tpl size");
++ sprom->boardflags_lo = tuple->data[1] |
++ ((u16)tuple->data[2] << 8);
++ break;
++ case SSB_SDIO_CIS_LEDS:
++ GOTO_ERROR_ON(tuple->size != 5,
++ "leds tpl size");
++ sprom->gpio0 = tuple->data[1];
++ sprom->gpio1 = tuple->data[2];
++ sprom->gpio2 = tuple->data[3];
++ sprom->gpio3 = tuple->data[4];
++ break;
++ default:
++ break;
++ }
++ break;
++ default:
++ break;
++ }
++ tuple = tuple->next;
++ }
++
++ return 0;
++error:
++ dev_err(ssb_sdio_dev(bus), "failed to fetch device invariants: %s\n",
++ error_description);
++ return -ENODEV;
++}
++
++void ssb_sdio_exit(struct ssb_bus *bus)
++{
++ if (bus->bustype != SSB_BUSTYPE_SDIO)
++ return;
++ /* Nothing to do here. */
+}
+
-+void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on)
++int ssb_sdio_init(struct ssb_bus *bus)
+{
-+ struct ssb_bus *bus = cc->dev->bus;
-+ int ldo;
++ if (bus->bustype != SSB_BUSTYPE_SDIO)
++ return 0;
+
-+ switch (bus->chip_id) {
-+ case 0x4312:
-+ ldo = SSB_PMURES_4312_PA_REF_LDO;
-+ break;
-+ case 0x4328:
-+ ldo = SSB_PMURES_4328_PA_REF_LDO;
-+ break;
-+ case 0x5354:
-+ ldo = SSB_PMURES_5354_PA_REF_LDO;
-+ break;
-+ default:
-+ return;
-+ }
++ bus->sdio_sbaddr = ~0;
+
-+ if (on)
-+ chipco_set32(cc, SSB_CHIPCO_PMU_MINRES_MSK, 1 << ldo);
-+ else
-+ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, ~(1 << ldo));
-+ chipco_read32(cc, SSB_CHIPCO_PMU_MINRES_MSK); //SPEC FIXME found via mmiotrace - dummy read?
++ return 0;
+}
-+
-+EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage);
-+EXPORT_SYMBOL(ssb_pmu_set_ldo_paref);
---- a/drivers/ssb/main.c
-+++ b/drivers/ssb/main.c
-@@ -469,6 +469,8 @@ static int ssb_devices_register(struct s
- dev->parent = &bus->host_pcmcia->dev;
- #endif
- break;
-+ case SSB_BUSTYPE_SDIO:
-+ break;
- case SSB_BUSTYPE_SSB:
- dev->dma_mask = &dev->coherent_dma_mask;
- break;
-@@ -1358,8 +1360,10 @@ static int __init ssb_modinit(void)
- ssb_buses_lock();
- err = ssb_attach_queued_buses();
- ssb_buses_unlock();
-- if (err)
-+ if (err) {
- bus_unregister(&ssb_bustype);
-+ goto out;
-+ }
+--- a/drivers/ssb/sprom.c
++++ b/drivers/ssb/sprom.c
+@@ -2,7 +2,7 @@
+ * Sonics Silicon Backplane
+ * Common SPROM support routines
+ *
+- * Copyright (C) 2005-2008 Michael Buesch <mb@bu3sch.de>
++ * Copyright (C) 2005-2008 Michael Buesch <m@bues.ch>
+ * Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
+ * Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
+ * Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
+@@ -14,9 +14,10 @@
+ #include "ssb_private.h"
- err = b43_pci_ssb_bridge_init();
+ #include <linux/ctype.h>
++#include <linux/slab.h>
+
+
+-static const struct ssb_sprom *fallback_sprom;
++static int(*get_fallback_sprom)(struct ssb_bus *dev, struct ssb_sprom *out);
+
+
+ static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len,
+@@ -102,6 +103,7 @@ ssize_t ssb_attr_sprom_store(struct ssb_
+ u16 *sprom;
+ int res = 0, err = -ENOMEM;
+ size_t sprom_size_words = bus->sprom_size;
++ struct ssb_freeze_context freeze;
+
+ sprom = kcalloc(bus->sprom_size, sizeof(u16), GFP_KERNEL);
+ if (!sprom)
+@@ -123,18 +125,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_
+ err = -ERESTARTSYS;
+ if (mutex_lock_interruptible(&bus->sprom_mutex))
+ goto out_kfree;
+- err = ssb_devices_freeze(bus);
+- if (err == -EOPNOTSUPP) {
+- ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze devices. "
+- "No suspend support. Is CONFIG_PM enabled?\n");
+- goto out_unlock;
+- }
++ err = ssb_devices_freeze(bus, &freeze);
if (err) {
-@@ -1375,7 +1379,7 @@ static int __init ssb_modinit(void)
- /* don't fail SSB init because of this */
- err = 0;
+ ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n");
+ goto out_unlock;
}
--
-+out:
- return err;
+ res = sprom_write(bus, sprom);
+- err = ssb_devices_thaw(bus);
++ err = ssb_devices_thaw(&freeze);
+ if (err)
+ ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n");
+ out_unlock:
+@@ -148,34 +145,56 @@ out:
}
- /* ssb must be initialized after PCI but before the ssb drivers.
---- a/drivers/ssb/pci.c
-+++ b/drivers/ssb/pci.c
-@@ -169,8 +169,14 @@ err_pci:
- /* Get the word-offset for a SSB_SPROM_XXX define. */
- #define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16))
- /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
--#define SPEX(_outvar, _offset, _mask, _shift) \
-+#define SPEX16(_outvar, _offset, _mask, _shift) \
- out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
-+#define SPEX32(_outvar, _offset, _mask, _shift) \
-+ out->_outvar = ((((u32)in[SPOFF((_offset)+2)] << 16 | \
-+ in[SPOFF(_offset)]) & (_mask)) >> (_shift))
-+#define SPEX(_outvar, _offset, _mask, _shift) \
-+ SPEX16(_outvar, _offset, _mask, _shift)
-+
- static inline u8 ssb_crc8(u8 crc, u8 data)
+ /**
+- * ssb_arch_set_fallback_sprom - Set a fallback SPROM for use if no SPROM is found.
+- *
+- * @sprom: The SPROM data structure to register.
++ * ssb_arch_register_fallback_sprom - Registers a method providing a
++ * fallback SPROM if no SPROM is found.
+ *
+- * With this function the architecture implementation may register a fallback
+- * SPROM data structure. The fallback is only used for PCI based SSB devices,
+- * where no valid SPROM can be found in the shadow registers.
++ * @sprom_callback: The callback function.
+ *
+- * This function is useful for weird architectures that have a half-assed SSB device
+- * hardwired to their PCI bus.
++ * With this function the architecture implementation may register a
++ * callback handler which fills the SPROM data structure. The fallback is
++ * only used for PCI based SSB devices, where no valid SPROM can be found
++ * in the shadow registers.
++ *
++ * This function is useful for weird architectures that have a half-assed
++ * SSB device hardwired to their PCI bus.
++ *
++ * Note that it does only work with PCI attached SSB devices. PCMCIA
++ * devices currently don't use this fallback.
++ * Architectures must provide the SPROM for native SSB devices anyway, so
++ * the fallback also isn't used for native devices.
+ *
+- * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently
+- * don't use this fallback.
+- * Architectures must provide the SPROM for native SSB devices anyway,
+- * so the fallback also isn't used for native devices.
+- *
+- * This function is available for architecture code, only. So it is not exported.
++ * This function is available for architecture code, only. So it is not
++ * exported.
+ */
+-int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom)
++int ssb_arch_register_fallback_sprom(int (*sprom_callback)(struct ssb_bus *bus,
++ struct ssb_sprom *out))
{
-@@ -474,12 +480,14 @@ static void sprom_extract_r8(struct ssb_
+- if (fallback_sprom)
++ if (get_fallback_sprom)
+ return -EEXIST;
+- fallback_sprom = sprom;
++ get_fallback_sprom = sprom_callback;
- /* extract the MAC address */
- for (i = 0; i < 3; i++) {
-- v = in[SPOFF(SSB_SPROM1_IL0MAC) + i];
-+ v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
- }
- SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0);
- SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
- SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0);
-+ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0);
-+ SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, 0xFFFF, 0);
- SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A,
- SSB_SPROM8_ANTAVAIL_A_SHIFT);
- SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG,
-@@ -490,12 +498,55 @@ static void sprom_extract_r8(struct ssb_
- SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0);
- SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A,
- SSB_SPROM8_ITSSI_A_SHIFT);
-+ SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0);
-+ SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK,
-+ SSB_SPROM8_MAXP_AL_SHIFT);
- SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0);
- SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1,
- SSB_SPROM8_GPIOA_P1_SHIFT);
- SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0);
- SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3,
- SSB_SPROM8_GPIOB_P3_SHIFT);
-+ SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0);
-+ SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G,
-+ SSB_SPROM8_TRI5G_SHIFT);
-+ SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0);
-+ SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH,
-+ SSB_SPROM8_TRI5GH_SHIFT);
-+ SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, 0);
-+ SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G,
-+ SSB_SPROM8_RXPO5G_SHIFT);
-+ SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0);
-+ SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G,
-+ SSB_SPROM8_RSSISMC2G_SHIFT);
-+ SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G,
-+ SSB_SPROM8_RSSISAV2G_SHIFT);
-+ SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G,
-+ SSB_SPROM8_BXA2G_SHIFT);
-+ SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0);
-+ SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G,
-+ SSB_SPROM8_RSSISMC5G_SHIFT);
-+ SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G,
-+ SSB_SPROM8_RSSISAV5G_SHIFT);
-+ SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G,
-+ SSB_SPROM8_BXA5G_SHIFT);
-+ SPEX(pa0b0, SSB_SPROM8_PA0B0, 0xFFFF, 0);
-+ SPEX(pa0b1, SSB_SPROM8_PA0B1, 0xFFFF, 0);
-+ SPEX(pa0b2, SSB_SPROM8_PA0B2, 0xFFFF, 0);
-+ SPEX(pa1b0, SSB_SPROM8_PA1B0, 0xFFFF, 0);
-+ SPEX(pa1b1, SSB_SPROM8_PA1B1, 0xFFFF, 0);
-+ SPEX(pa1b2, SSB_SPROM8_PA1B2, 0xFFFF, 0);
-+ SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, 0xFFFF, 0);
-+ SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, 0xFFFF, 0);
-+ SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, 0xFFFF, 0);
-+ SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, 0xFFFF, 0);
-+ SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, 0xFFFF, 0);
-+ SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, 0xFFFF, 0);
-+ SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, 0xFFFF, 0);
-+ SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, 0xFFFFFFFF, 0);
-+ SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, 0xFFFFFFFF, 0);
-+ SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, 0xFFFFFFFF, 0);
-+ SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
+ return 0;
+ }
- /* Extract the antenna gain values. */
- SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01,
-@@ -549,6 +600,7 @@ static int sprom_extract(struct ssb_bus
- ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
- " revision %d detected. Will extract"
- " v1\n", out->revision);
-+ out->revision = 1;
- sprom_extract_r123(out, in);
- }
- }
---- a/drivers/ssb/scan.c
-+++ b/drivers/ssb/scan.c
-@@ -175,6 +175,8 @@ static u32 scan_read32(struct ssb_bus *b
- } else
- ssb_pcmcia_switch_segment(bus, 0);
- break;
-+ case SSB_BUSTYPE_SDIO:
-+ break;
- }
- return readl(bus->mmio + offset);
+-const struct ssb_sprom *ssb_get_fallback_sprom(void)
++int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, struct ssb_sprom *out)
+ {
+- return fallback_sprom;
++ if (!get_fallback_sprom)
++ return -ENOENT;
++
++ return get_fallback_sprom(bus, out);
++}
++
++/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
++bool ssb_is_sprom_available(struct ssb_bus *bus)
++{
++ /* status register only exists on chipcomon rev >= 11 and we need check
++ for >= 31 only */
++ /* this routine differs from specs as we do not access SPROM directly
++ on PCMCIA */
++ if (bus->bustype == SSB_BUSTYPE_PCI &&
++ bus->chipco.dev && /* can be unavailable! */
++ bus->chipco.dev->id.revision >= 31)
++ return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM;
++
++ return true;
}
-@@ -188,6 +190,8 @@ static int scan_switchcore(struct ssb_bu
- return ssb_pci_switch_coreidx(bus, coreidx);
- case SSB_BUSTYPE_PCMCIA:
- return ssb_pcmcia_switch_coreidx(bus, coreidx);
-+ case SSB_BUSTYPE_SDIO:
-+ break;
- }
+--- a/drivers/ssb/ssb_private.h
++++ b/drivers/ssb/ssb_private.h
+@@ -114,6 +114,46 @@ static inline int ssb_pcmcia_init(struct
+ }
+ #endif /* CONFIG_SSB_PCMCIAHOST */
+
++/* sdio.c */
++#ifdef CONFIG_SSB_SDIOHOST
++extern int ssb_sdio_get_invariants(struct ssb_bus *bus,
++ struct ssb_init_invariants *iv);
++
++extern u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset);
++extern int ssb_sdio_switch_core(struct ssb_bus *bus, struct ssb_device *dev);
++extern int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx);
++extern int ssb_sdio_hardware_setup(struct ssb_bus *bus);
++extern void ssb_sdio_exit(struct ssb_bus *bus);
++extern int ssb_sdio_init(struct ssb_bus *bus);
++
++extern const struct ssb_bus_ops ssb_sdio_ops;
++#else /* CONFIG_SSB_SDIOHOST */
++static inline u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset)
++{
++ return 0;
++}
++static inline int ssb_sdio_switch_core(struct ssb_bus *bus,
++ struct ssb_device *dev)
++{
++ return 0;
++}
++static inline int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx)
++{
++ return 0;
++}
++static inline int ssb_sdio_hardware_setup(struct ssb_bus *bus)
++{
++ return 0;
++}
++static inline void ssb_sdio_exit(struct ssb_bus *bus)
++{
++}
++static inline int ssb_sdio_init(struct ssb_bus *bus)
++{
++ return 0;
++}
++#endif /* CONFIG_SSB_SDIOHOST */
++
+
+ /* scan.c */
+ extern const char *ssb_core_name(u16 coreid);
+@@ -131,24 +171,33 @@ ssize_t ssb_attr_sprom_store(struct ssb_
+ const char *buf, size_t count,
+ int (*sprom_check_crc)(const u16 *sprom, size_t size),
+ int (*sprom_write)(struct ssb_bus *bus, const u16 *sprom));
+-extern const struct ssb_sprom *ssb_get_fallback_sprom(void);
++extern int ssb_fill_sprom_with_fallback(struct ssb_bus *bus,
++ struct ssb_sprom *out);
+
+
+ /* core.c */
+ extern u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m);
+-extern int ssb_devices_freeze(struct ssb_bus *bus);
+-extern int ssb_devices_thaw(struct ssb_bus *bus);
+ extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev);
+ int ssb_for_each_bus_call(unsigned long data,
+ int (*func)(struct ssb_bus *bus, unsigned long data));
+ extern struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev);
+
++struct ssb_freeze_context {
++ /* Pointer to the bus */
++ struct ssb_bus *bus;
++ /* Boolean list to indicate whether a device is frozen on this bus. */
++ bool device_frozen[SSB_MAX_NR_CORES];
++};
++extern int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx);
++extern int ssb_devices_thaw(struct ssb_freeze_context *ctx);
++
++
+
+ /* b43_pci_bridge.c */
+ #ifdef CONFIG_SSB_B43_PCI_BRIDGE
+ extern int __init b43_pci_ssb_bridge_init(void);
+ extern void __exit b43_pci_ssb_bridge_exit(void);
+-#else /* CONFIG_SSB_B43_PCI_BRIDGR */
++#else /* CONFIG_SSB_B43_PCI_BRIDGE */
+ static inline int b43_pci_ssb_bridge_init(void)
+ {
return 0;
+@@ -156,6 +205,6 @@ static inline int b43_pci_ssb_bridge_ini
+ static inline void b43_pci_ssb_bridge_exit(void)
+ {
}
-@@ -206,6 +210,8 @@ void ssb_iounmap(struct ssb_bus *bus)
- SSB_BUG_ON(1); /* Can't reach this code. */
- #endif
- break;
-+ case SSB_BUSTYPE_SDIO:
-+ break;
- }
- bus->mmio = NULL;
- bus->mapped_device = NULL;
-@@ -230,6 +236,8 @@ static void __iomem *ssb_ioremap(struct
- SSB_BUG_ON(1); /* Can't reach this code. */
- #endif
- break;
-+ case SSB_BUSTYPE_SDIO:
-+ break;
- }
+-#endif /* CONFIG_SSB_PCIHOST */
++#endif /* CONFIG_SSB_B43_PCI_BRIDGE */
- return mmio;
+ #endif /* LINUX_SSB_PRIVATE_H_ */
+--- a/include/linux/pci_ids.h
++++ b/include/linux/pci_ids.h
+@@ -2017,6 +2017,7 @@
+ #define PCI_DEVICE_ID_AFAVLAB_P030 0x2182
+ #define PCI_SUBDEVICE_ID_AFAVLAB_P061 0x2150
+
++#define PCI_VENDOR_ID_BCM_GVC 0x14a4
+ #define PCI_VENDOR_ID_BROADCOM 0x14e4
+ #define PCI_DEVICE_ID_TIGON3_5752 0x1600
+ #define PCI_DEVICE_ID_TIGON3_5752M 0x1601
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
-@@ -27,24 +27,54 @@ struct ssb_sprom {
+@@ -16,6 +16,12 @@ struct pcmcia_device;
+ struct ssb_bus;
+ struct ssb_driver;
+
++struct ssb_sprom_core_pwr_info {
++ u8 itssi_2g, itssi_5g;
++ u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh;
++ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3];
++};
++
+ struct ssb_sprom {
+ u8 revision;
+ u8 il0mac[6]; /* MAC address for 802.11b/g */
+@@ -25,26 +31,64 @@ struct ssb_sprom {
+ u8 et1phyaddr; /* MII address for enet1 */
+ u8 et0mdcport; /* MDIO for enet0 */
u8 et1mdcport; /* MDIO for enet1 */
- u8 board_rev; /* Board revision number from SPROM. */
+- u8 board_rev; /* Board revision number from SPROM. */
++ u16 board_rev; /* Board revision number from SPROM. */
u8 country_code; /* Country Code */
- u8 ant_available_a; /* A-PHY antenna available bits (up to 4) */
- u8 ant_available_bg; /* B/G-PHY antenna available bits (up to 4) */
++ u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */
++ u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */
+ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */
+ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */
u16 pa0b0;
+ u8 tri5gl; /* 5.2GHz TX isolation */
+ u8 tri5g; /* 5.3GHz TX isolation */
+ u8 tri5gh; /* 5.8GHz TX isolation */
++ u8 txpid2g[4]; /* 2GHz TX power index */
++ u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */
++ u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */
++ u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */
+ u8 rxpo2g; /* 2GHz RX power offset */
+ u8 rxpo5g; /* 5GHz RX power offset */
+ u8 rssisav2g; /* 2GHz RSSI params */
+ u16 boardflags2_lo; /* Board flags (bits 32-47) */
+ u16 boardflags2_hi; /* Board flags (bits 48-63) */
+ /* TODO store board flags in a single u64 */
++
++ struct ssb_sprom_core_pwr_info core_pwr_info[4];
/* Antenna gain values for up to 4 antennas
* on each band. Values in dBm/4 (Q5.2). Negative gain means the
-@@ -58,7 +88,7 @@ struct ssb_sprom {
+@@ -58,14 +102,23 @@ struct ssb_sprom {
} ghz5; /* 5GHz band */
} antenna_gain;
- /* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */
++ struct {
++ struct {
++ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut;
++ } ghz2;
++ struct {
++ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut;
++ } ghz5;
++ } fem;
++
+ /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
};
/* Information about the PCB the circuitry is soldered on. */
-@@ -208,6 +238,7 @@ enum ssb_bustype {
+ struct ssb_boardinfo {
+ u16 vendor;
+ u16 type;
+- u16 rev;
++ u8 rev;
+ };
+
+
+@@ -137,7 +190,7 @@ struct ssb_device {
+ * is an optimization. */
+ const struct ssb_bus_ops *ops;
+
+- struct device *dev;
++ struct device *dev, *dma_dev;
+
+ struct ssb_bus *bus;
+ struct ssb_device_id id;
+@@ -195,10 +248,9 @@ struct ssb_driver {
+ #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv)
+
+ extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner);
+-static inline int ssb_driver_register(struct ssb_driver *drv)
+-{
+- return __ssb_driver_register(drv, THIS_MODULE);
+-}
++#define ssb_driver_register(drv) \
++ __ssb_driver_register(drv, THIS_MODULE)
++
+ extern void ssb_driver_unregister(struct ssb_driver *drv);
+
+
+@@ -208,6 +260,7 @@ enum ssb_bustype {
SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */
SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */
SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */
};
/* board_vendor */
-@@ -240,8 +271,12 @@ struct ssb_bus {
+@@ -238,20 +291,33 @@ struct ssb_bus {
+
+ const struct ssb_bus_ops *ops;
- /* The core in the basic address register window. (PCI bus only) */
+- /* The core in the basic address register window. (PCI bus only) */
++ /* The core currently mapped into the MMIO window.
++ * Not valid on all host-buses. So don't use outside of SSB. */
struct ssb_device *mapped_device;
- /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
- u8 mapped_pcmcia_seg;
/* Lock for core and segment switching.
* On PCMCIA-host busses this is used to protect the whole MMIO access. */
spinlock_t bar_lock;
-@@ -252,6 +287,11 @@ struct ssb_bus {
- struct pci_dev *host_pci;
- /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
- struct pcmcia_device *host_pcmcia;
-+ /* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */
-+ struct sdio_func *host_sdio;
+
+- /* The bus this backplane is running on. */
++ /* The host-bus this backplane is running on. */
+ enum ssb_bustype bustype;
+- /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */
+- struct pci_dev *host_pci;
+- /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
+- struct pcmcia_device *host_pcmcia;
++ /* Pointers to the host-bus. Check bustype before using any of these pointers. */
++ union {
++ /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */
++ struct pci_dev *host_pci;
++ /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
++ struct pcmcia_device *host_pcmcia;
++ /* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */
++ struct sdio_func *host_sdio;
++ };
+
+ /* See enum ssb_quirks */
+ unsigned int quirks;
#ifdef CONFIG_SSB_SPROM
/* Mutex to protect the SPROM writing. */
-@@ -306,6 +346,11 @@ struct ssb_bus {
+@@ -260,7 +326,8 @@ struct ssb_bus {
+
+ /* ID information about the Chip. */
+ u16 chip_id;
+- u16 chip_rev;
++ u8 chip_rev;
++ u16 sprom_offset;
+ u16 sprom_size; /* number of words in sprom */
+ u8 chip_package;
+
+@@ -306,6 +373,11 @@ struct ssb_bus {
#endif /* DEBUG */
};
/* The initialization-invariants. */
struct ssb_init_invariants {
/* Versioning information about the PCB. */
+@@ -336,12 +408,23 @@ extern int ssb_bus_pcmciabus_register(st
+ struct pcmcia_device *pcmcia_dev,
+ unsigned long baseaddr);
+ #endif /* CONFIG_SSB_PCMCIAHOST */
++#ifdef CONFIG_SSB_SDIOHOST
++extern int ssb_bus_sdiobus_register(struct ssb_bus *bus,
++ struct sdio_func *sdio_func,
++ unsigned int quirks);
++#endif /* CONFIG_SSB_SDIOHOST */
++
+
+ extern void ssb_bus_unregister(struct ssb_bus *bus);
+
++/* Does the device have an SPROM? */
++extern bool ssb_is_sprom_available(struct ssb_bus *bus);
++
+ /* Set a fallback SPROM.
+ * See kdoc at the function definition for complete documentation. */
+-extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
++extern int ssb_arch_register_fallback_sprom(
++ int (*sprom_callback)(struct ssb_bus *bus,
++ struct ssb_sprom *out));
+
+ /* Suspend a SSB bus.
+ * Call this from the parent bus suspend routine. */
+@@ -612,6 +695,7 @@ extern int ssb_bus_may_powerdown(struct
+ * Otherwise static always-on powercontrol will be used. */
+ extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
+
++extern void ssb_commit_settings(struct ssb_bus *bus);
+
+ /* Various helper functions */
+ extern u32 ssb_admatch_base(u32 adm);
--- a/include/linux/ssb/ssb_driver_chipcommon.h
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
-@@ -629,5 +629,15 @@ extern int ssb_chipco_serial_init(struct
+@@ -8,7 +8,7 @@
+ * gpio interface, extbus, and support for serial and parallel flashes.
+ *
+ * Copyright 2005, Broadcom Corporation
+- * Copyright 2006, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2006, Michael Buesch <m@bues.ch>
+ *
+ * Licensed under the GPL version 2. See COPYING for details.
+ */
+@@ -53,6 +53,7 @@
+ #define SSB_CHIPCO_CAP_64BIT 0x08000000 /* 64-bit Backplane */
+ #define SSB_CHIPCO_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */
+ #define SSB_CHIPCO_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */
++#define SSB_CHIPCO_CAP_SPROM 0x40000000 /* SPROM present */
+ #define SSB_CHIPCO_CORECTL 0x0008
+ #define SSB_CHIPCO_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */
+ #define SSB_CHIPCO_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
+@@ -122,6 +123,8 @@
+ #define SSB_CHIPCO_FLASHDATA 0x0048
+ #define SSB_CHIPCO_BCAST_ADDR 0x0050
+ #define SSB_CHIPCO_BCAST_DATA 0x0054
++#define SSB_CHIPCO_GPIOPULLUP 0x0058 /* Rev >= 20 only */
++#define SSB_CHIPCO_GPIOPULLDOWN 0x005C /* Rev >= 20 only */
+ #define SSB_CHIPCO_GPIOIN 0x0060
+ #define SSB_CHIPCO_GPIOOUT 0x0064
+ #define SSB_CHIPCO_GPIOOUTEN 0x0068
+@@ -130,6 +133,9 @@
+ #define SSB_CHIPCO_GPIOIRQ 0x0074
+ #define SSB_CHIPCO_WATCHDOG 0x0080
+ #define SSB_CHIPCO_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */
++#define SSB_CHIPCO_GPIOTIMER_OFFTIME 0x0000FFFF
++#define SSB_CHIPCO_GPIOTIMER_OFFTIME_SHIFT 0
++#define SSB_CHIPCO_GPIOTIMER_ONTIME 0xFFFF0000
+ #define SSB_CHIPCO_GPIOTIMER_ONTIME_SHIFT 16
+ #define SSB_CHIPCO_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */
+ #define SSB_CHIPCO_CLOCK_N 0x0090
+@@ -188,8 +194,10 @@
+ #define SSB_CHIPCO_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */
+ #define SSB_CHIPCO_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */
+ #define SSB_CHIPCO_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */
+-#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00010000 /* HT available */
+-#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00020000 /* APL available */
++#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00010000 /* ALP available */
++#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00020000 /* HT available */
++#define SSB_CHIPCO_CLKCTLST_4328A0_HAVEHT 0x00010000 /* 4328a0 has reversed bits */
++#define SSB_CHIPCO_CLKCTLST_4328A0_HAVEALP 0x00020000 /* 4328a0 has reversed bits */
+ #define SSB_CHIPCO_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */
+ #define SSB_CHIPCO_UART0_DATA 0x0300
+ #define SSB_CHIPCO_UART0_IMR 0x0304
+@@ -385,6 +393,7 @@
+
+
+ /** Chip specific Chip-Status register contents. */
++#define SSB_CHIPCO_CHST_4322_SPROM_EXISTS 0x00000040 /* SPROM present */
+ #define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL 0x00000003
+ #define SSB_CHIPCO_CHST_4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */
+ #define SSB_CHIPCO_CHST_4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */
+@@ -398,6 +407,18 @@
+ #define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT 4
+ #define SSB_CHIPCO_CHST_4325_PMUTOP_2B 0x00000200 /* 1 for 2b, 0 for to 2a */
+
++/** Macros to determine SPROM presence based on Chip-Status register. */
++#define SSB_CHIPCO_CHST_4312_SPROM_PRESENT(status) \
++ ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
++ SSB_CHIPCO_CHST_4325_OTP_SEL)
++#define SSB_CHIPCO_CHST_4322_SPROM_PRESENT(status) \
++ (status & SSB_CHIPCO_CHST_4322_SPROM_EXISTS)
++#define SSB_CHIPCO_CHST_4325_SPROM_PRESENT(status) \
++ (((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
++ SSB_CHIPCO_CHST_4325_DEFCIS_SEL) && \
++ ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
++ SSB_CHIPCO_CHST_4325_OTP_SEL))
++
+
+
+ /** Clockcontrol masks and values **/
+@@ -564,6 +585,7 @@ struct ssb_chipcommon_pmu {
+ struct ssb_chipcommon {
+ struct ssb_device *dev;
+ u32 capabilities;
++ u32 status;
+ /* Fast Powerup Delay constant */
+ u16 fast_pwrup_delay;
+ struct ssb_chipcommon_pmu pmu;
+@@ -629,5 +651,15 @@ extern int ssb_chipco_serial_init(struct
/* PMU support */
extern void ssb_pmu_init(struct ssb_chipcommon *cc);
#endif /* LINUX_SSB_CHIPCO_H_ */
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
-@@ -162,7 +162,7 @@
+@@ -85,6 +85,8 @@
+ #define SSB_IMSTATE_AP_RSV 0x00000030 /* Reserved */
+ #define SSB_IMSTATE_IBE 0x00020000 /* In Band Error */
+ #define SSB_IMSTATE_TO 0x00040000 /* Timeout */
++#define SSB_IMSTATE_BUSY 0x01800000 /* Busy (Backplane rev >= 2.3 only) */
++#define SSB_IMSTATE_REJECT 0x02000000 /* Reject (Backplane rev >= 2.3 only) */
+ #define SSB_INTVEC 0x0F94 /* SB Interrupt Mask */
+ #define SSB_INTVEC_PCI 0x00000001 /* Enable interrupts for PCI */
+ #define SSB_INTVEC_ENET0 0x00000002 /* Enable interrupts for enet 0 */
+@@ -95,7 +97,7 @@
+ #define SSB_INTVEC_ENET1 0x00000040 /* Enable interrupts for enet 1 */
+ #define SSB_TMSLOW 0x0F98 /* SB Target State Low */
+ #define SSB_TMSLOW_RESET 0x00000001 /* Reset */
+-#define SSB_TMSLOW_REJECT_22 0x00000002 /* Reject (Backplane rev 2.2) */
++#define SSB_TMSLOW_REJECT 0x00000002 /* Reject (Standard Backplane) */
+ #define SSB_TMSLOW_REJECT_23 0x00000004 /* Reject (Backplane rev 2.3) */
+ #define SSB_TMSLOW_CLOCK 0x00010000 /* Clock Enable */
+ #define SSB_TMSLOW_FGC 0x00020000 /* Force Gated Clocks On */
+@@ -162,7 +164,7 @@
/* SPROM shadow area. If not otherwise noted, fields are
* two bytes wide. Note that the SPROM can _only_ be read
*/
#define SSB_SPROMSIZE_WORDS 64
#define SSB_SPROMSIZE_BYTES (SSB_SPROMSIZE_WORDS * sizeof(u16))
-@@ -327,8 +327,11 @@
+@@ -170,26 +172,27 @@
+ #define SSB_SPROMSIZE_WORDS_R4 220
+ #define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
+ #define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
+-#define SSB_SPROM_BASE 0x1000
+-#define SSB_SPROM_REVISION 0x107E
++#define SSB_SPROM_BASE1 0x1000
++#define SSB_SPROM_BASE31 0x0800
++#define SSB_SPROM_REVISION 0x007E
+ #define SSB_SPROM_REVISION_REV 0x00FF /* SPROM Revision number */
+ #define SSB_SPROM_REVISION_CRC 0xFF00 /* SPROM CRC8 value */
+ #define SSB_SPROM_REVISION_CRC_SHIFT 8
+
+ /* SPROM Revision 1 */
+-#define SSB_SPROM1_SPID 0x1004 /* Subsystem Product ID for PCI */
+-#define SSB_SPROM1_SVID 0x1006 /* Subsystem Vendor ID for PCI */
+-#define SSB_SPROM1_PID 0x1008 /* Product ID for PCI */
+-#define SSB_SPROM1_IL0MAC 0x1048 /* 6 bytes MAC address for 802.11b/g */
+-#define SSB_SPROM1_ET0MAC 0x104E /* 6 bytes MAC address for Ethernet */
+-#define SSB_SPROM1_ET1MAC 0x1054 /* 6 bytes MAC address for 802.11a */
+-#define SSB_SPROM1_ETHPHY 0x105A /* Ethernet PHY settings */
++#define SSB_SPROM1_SPID 0x0004 /* Subsystem Product ID for PCI */
++#define SSB_SPROM1_SVID 0x0006 /* Subsystem Vendor ID for PCI */
++#define SSB_SPROM1_PID 0x0008 /* Product ID for PCI */
++#define SSB_SPROM1_IL0MAC 0x0048 /* 6 bytes MAC address for 802.11b/g */
++#define SSB_SPROM1_ET0MAC 0x004E /* 6 bytes MAC address for Ethernet */
++#define SSB_SPROM1_ET1MAC 0x0054 /* 6 bytes MAC address for 802.11a */
++#define SSB_SPROM1_ETHPHY 0x005A /* Ethernet PHY settings */
+ #define SSB_SPROM1_ETHPHY_ET0A 0x001F /* MII Address for enet0 */
+ #define SSB_SPROM1_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */
+ #define SSB_SPROM1_ETHPHY_ET1A_SHIFT 5
+ #define SSB_SPROM1_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
+ #define SSB_SPROM1_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
+-#define SSB_SPROM1_BINF 0x105C /* Board info */
++#define SSB_SPROM1_BINF 0x005C /* Board info */
+ #define SSB_SPROM1_BINF_BREV 0x00FF /* Board Revision */
+ #define SSB_SPROM1_BINF_CCODE 0x0F00 /* Country Code */
+ #define SSB_SPROM1_BINF_CCODE_SHIFT 8
+@@ -197,63 +200,63 @@
+ #define SSB_SPROM1_BINF_ANTBG_SHIFT 12
+ #define SSB_SPROM1_BINF_ANTA 0xC000 /* Available A-PHY antennas */
+ #define SSB_SPROM1_BINF_ANTA_SHIFT 14
+-#define SSB_SPROM1_PA0B0 0x105E
+-#define SSB_SPROM1_PA0B1 0x1060
+-#define SSB_SPROM1_PA0B2 0x1062
+-#define SSB_SPROM1_GPIOA 0x1064 /* General Purpose IO pins 0 and 1 */
++#define SSB_SPROM1_PA0B0 0x005E
++#define SSB_SPROM1_PA0B1 0x0060
++#define SSB_SPROM1_PA0B2 0x0062
++#define SSB_SPROM1_GPIOA 0x0064 /* General Purpose IO pins 0 and 1 */
+ #define SSB_SPROM1_GPIOA_P0 0x00FF /* Pin 0 */
+ #define SSB_SPROM1_GPIOA_P1 0xFF00 /* Pin 1 */
+ #define SSB_SPROM1_GPIOA_P1_SHIFT 8
+-#define SSB_SPROM1_GPIOB 0x1066 /* General Purpuse IO pins 2 and 3 */
++#define SSB_SPROM1_GPIOB 0x0066 /* General Purpuse IO pins 2 and 3 */
+ #define SSB_SPROM1_GPIOB_P2 0x00FF /* Pin 2 */
+ #define SSB_SPROM1_GPIOB_P3 0xFF00 /* Pin 3 */
+ #define SSB_SPROM1_GPIOB_P3_SHIFT 8
+-#define SSB_SPROM1_MAXPWR 0x1068 /* Power Amplifier Max Power */
++#define SSB_SPROM1_MAXPWR 0x0068 /* Power Amplifier Max Power */
+ #define SSB_SPROM1_MAXPWR_BG 0x00FF /* B-PHY and G-PHY (in dBm Q5.2) */
+ #define SSB_SPROM1_MAXPWR_A 0xFF00 /* A-PHY (in dBm Q5.2) */
+ #define SSB_SPROM1_MAXPWR_A_SHIFT 8
+-#define SSB_SPROM1_PA1B0 0x106A
+-#define SSB_SPROM1_PA1B1 0x106C
+-#define SSB_SPROM1_PA1B2 0x106E
+-#define SSB_SPROM1_ITSSI 0x1070 /* Idle TSSI Target */
++#define SSB_SPROM1_PA1B0 0x006A
++#define SSB_SPROM1_PA1B1 0x006C
++#define SSB_SPROM1_PA1B2 0x006E
++#define SSB_SPROM1_ITSSI 0x0070 /* Idle TSSI Target */
+ #define SSB_SPROM1_ITSSI_BG 0x00FF /* B-PHY and G-PHY*/
+ #define SSB_SPROM1_ITSSI_A 0xFF00 /* A-PHY */
+ #define SSB_SPROM1_ITSSI_A_SHIFT 8
+-#define SSB_SPROM1_BFLLO 0x1072 /* Boardflags (low 16 bits) */
+-#define SSB_SPROM1_AGAIN 0x1074 /* Antenna Gain (in dBm Q5.2) */
++#define SSB_SPROM1_BFLLO 0x0072 /* Boardflags (low 16 bits) */
++#define SSB_SPROM1_AGAIN 0x0074 /* Antenna Gain (in dBm Q5.2) */
+ #define SSB_SPROM1_AGAIN_BG 0x00FF /* B-PHY and G-PHY */
+ #define SSB_SPROM1_AGAIN_BG_SHIFT 0
+ #define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */
+ #define SSB_SPROM1_AGAIN_A_SHIFT 8
+
+ /* SPROM Revision 2 (inherits from rev 1) */
+-#define SSB_SPROM2_BFLHI 0x1038 /* Boardflags (high 16 bits) */
+-#define SSB_SPROM2_MAXP_A 0x103A /* A-PHY Max Power */
++#define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */
++#define SSB_SPROM2_MAXP_A 0x003A /* A-PHY Max Power */
+ #define SSB_SPROM2_MAXP_A_HI 0x00FF /* Max Power High */
+ #define SSB_SPROM2_MAXP_A_LO 0xFF00 /* Max Power Low */
+ #define SSB_SPROM2_MAXP_A_LO_SHIFT 8
+-#define SSB_SPROM2_PA1LOB0 0x103C /* A-PHY PowerAmplifier Low Settings */
+-#define SSB_SPROM2_PA1LOB1 0x103E /* A-PHY PowerAmplifier Low Settings */
+-#define SSB_SPROM2_PA1LOB2 0x1040 /* A-PHY PowerAmplifier Low Settings */
+-#define SSB_SPROM2_PA1HIB0 0x1042 /* A-PHY PowerAmplifier High Settings */
+-#define SSB_SPROM2_PA1HIB1 0x1044 /* A-PHY PowerAmplifier High Settings */
+-#define SSB_SPROM2_PA1HIB2 0x1046 /* A-PHY PowerAmplifier High Settings */
+-#define SSB_SPROM2_OPO 0x1078 /* OFDM Power Offset from CCK Level */
++#define SSB_SPROM2_PA1LOB0 0x003C /* A-PHY PowerAmplifier Low Settings */
++#define SSB_SPROM2_PA1LOB1 0x003E /* A-PHY PowerAmplifier Low Settings */
++#define SSB_SPROM2_PA1LOB2 0x0040 /* A-PHY PowerAmplifier Low Settings */
++#define SSB_SPROM2_PA1HIB0 0x0042 /* A-PHY PowerAmplifier High Settings */
++#define SSB_SPROM2_PA1HIB1 0x0044 /* A-PHY PowerAmplifier High Settings */
++#define SSB_SPROM2_PA1HIB2 0x0046 /* A-PHY PowerAmplifier High Settings */
++#define SSB_SPROM2_OPO 0x0078 /* OFDM Power Offset from CCK Level */
+ #define SSB_SPROM2_OPO_VALUE 0x00FF
+ #define SSB_SPROM2_OPO_UNUSED 0xFF00
+-#define SSB_SPROM2_CCODE 0x107C /* Two char Country Code */
++#define SSB_SPROM2_CCODE 0x007C /* Two char Country Code */
+
+ /* SPROM Revision 3 (inherits most data from rev 2) */
+-#define SSB_SPROM3_IL0MAC 0x104A /* 6 bytes MAC address for 802.11b/g */
+-#define SSB_SPROM3_OFDMAPO 0x102C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
+-#define SSB_SPROM3_OFDMALPO 0x1030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
+-#define SSB_SPROM3_OFDMAHPO 0x1034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
+-#define SSB_SPROM3_GPIOLDC 0x1042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
++#define SSB_SPROM3_OFDMAPO 0x002C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
++#define SSB_SPROM3_OFDMALPO 0x0030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
++#define SSB_SPROM3_OFDMAHPO 0x0034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
++#define SSB_SPROM3_GPIOLDC 0x0042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
+ #define SSB_SPROM3_GPIOLDC_OFF 0x0000FF00 /* Off Count */
+ #define SSB_SPROM3_GPIOLDC_OFF_SHIFT 8
+ #define SSB_SPROM3_GPIOLDC_ON 0x00FF0000 /* On Count */
+ #define SSB_SPROM3_GPIOLDC_ON_SHIFT 16
+-#define SSB_SPROM3_CCKPO 0x1078 /* CCK Power Offset */
++#define SSB_SPROM3_IL0MAC 0x004A /* 6 bytes MAC address for 802.11b/g */
++#define SSB_SPROM3_CCKPO 0x0078 /* CCK Power Offset */
+ #define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */
+ #define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */
+ #define SSB_SPROM3_CCKPO_2M_SHIFT 4
+@@ -264,104 +267,291 @@
+ #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
+
+ /* SPROM Revision 4 */
+-#define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for a/b/g/n */
+-#define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings ?? */
++#define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */
++#define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */
++#define SSB_SPROM4_BFL2LO 0x0048 /* Board flags 2 (low 16 bits) */
++#define SSB_SPROM4_BFL2HI 0x004A /* Board flags 2 Hi */
++#define SSB_SPROM4_IL0MAC 0x004C /* 6 byte MAC address for a/b/g/n */
++#define SSB_SPROM4_CCODE 0x0052 /* Country Code (2 bytes) */
++#define SSB_SPROM4_GPIOA 0x0056 /* Gen. Purpose IO # 0 and 1 */
++#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */
++#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */
++#define SSB_SPROM4_GPIOA_P1_SHIFT 8
++#define SSB_SPROM4_GPIOB 0x0058 /* Gen. Purpose IO # 2 and 3 */
++#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */
++#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */
++#define SSB_SPROM4_GPIOB_P3_SHIFT 8
++#define SSB_SPROM4_ETHPHY 0x005A /* Ethernet PHY settings ?? */
+ #define SSB_SPROM4_ETHPHY_ET0A 0x001F /* MII Address for enet0 */
+ #define SSB_SPROM4_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */
+ #define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5
+ #define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
+ #define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
+-#define SSB_SPROM4_CCODE 0x1052 /* Country Code (2 bytes) */
+-#define SSB_SPROM4_ANTAVAIL 0x105D /* Antenna available bitfields */
+-#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */
+-#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0
+-#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */
+-#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8
+-#define SSB_SPROM4_BFLLO 0x1044 /* Boardflags (low 16 bits) */
+-#define SSB_SPROM4_AGAIN01 0x105E /* Antenna Gain (in dBm Q5.2) */
++#define SSB_SPROM4_ANTAVAIL 0x005D /* Antenna available bitfields */
++#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */
++#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0
++#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */
++#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8
++#define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */
+ #define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */
+ #define SSB_SPROM4_AGAIN0_SHIFT 0
+ #define SSB_SPROM4_AGAIN1 0xFF00 /* Antenna 1 */
+ #define SSB_SPROM4_AGAIN1_SHIFT 8
+-#define SSB_SPROM4_AGAIN23 0x1060
++#define SSB_SPROM4_AGAIN23 0x0060
+ #define SSB_SPROM4_AGAIN2 0x00FF /* Antenna 2 */
+ #define SSB_SPROM4_AGAIN2_SHIFT 0
+ #define SSB_SPROM4_AGAIN3 0xFF00 /* Antenna 3 */
+ #define SSB_SPROM4_AGAIN3_SHIFT 8
+-#define SSB_SPROM4_BFLHI 0x1046 /* Board Flags Hi */
+-#define SSB_SPROM4_MAXP_BG 0x1080 /* Max Power BG in path 1 */
++#define SSB_SPROM4_TXPID2G01 0x0062 /* TX Power Index 2GHz */
++#define SSB_SPROM4_TXPID2G0 0x00FF
++#define SSB_SPROM4_TXPID2G0_SHIFT 0
++#define SSB_SPROM4_TXPID2G1 0xFF00
++#define SSB_SPROM4_TXPID2G1_SHIFT 8
++#define SSB_SPROM4_TXPID2G23 0x0064 /* TX Power Index 2GHz */
++#define SSB_SPROM4_TXPID2G2 0x00FF
++#define SSB_SPROM4_TXPID2G2_SHIFT 0
++#define SSB_SPROM4_TXPID2G3 0xFF00
++#define SSB_SPROM4_TXPID2G3_SHIFT 8
++#define SSB_SPROM4_TXPID5G01 0x0066 /* TX Power Index 5GHz middle subband */
++#define SSB_SPROM4_TXPID5G0 0x00FF
++#define SSB_SPROM4_TXPID5G0_SHIFT 0
++#define SSB_SPROM4_TXPID5G1 0xFF00
++#define SSB_SPROM4_TXPID5G1_SHIFT 8
++#define SSB_SPROM4_TXPID5G23 0x0068 /* TX Power Index 5GHz middle subband */
++#define SSB_SPROM4_TXPID5G2 0x00FF
++#define SSB_SPROM4_TXPID5G2_SHIFT 0
++#define SSB_SPROM4_TXPID5G3 0xFF00
++#define SSB_SPROM4_TXPID5G3_SHIFT 8
++#define SSB_SPROM4_TXPID5GL01 0x006A /* TX Power Index 5GHz low subband */
++#define SSB_SPROM4_TXPID5GL0 0x00FF
++#define SSB_SPROM4_TXPID5GL0_SHIFT 0
++#define SSB_SPROM4_TXPID5GL1 0xFF00
++#define SSB_SPROM4_TXPID5GL1_SHIFT 8
++#define SSB_SPROM4_TXPID5GL23 0x006C /* TX Power Index 5GHz low subband */
++#define SSB_SPROM4_TXPID5GL2 0x00FF
++#define SSB_SPROM4_TXPID5GL2_SHIFT 0
++#define SSB_SPROM4_TXPID5GL3 0xFF00
++#define SSB_SPROM4_TXPID5GL3_SHIFT 8
++#define SSB_SPROM4_TXPID5GH01 0x006E /* TX Power Index 5GHz high subband */
++#define SSB_SPROM4_TXPID5GH0 0x00FF
++#define SSB_SPROM4_TXPID5GH0_SHIFT 0
++#define SSB_SPROM4_TXPID5GH1 0xFF00
++#define SSB_SPROM4_TXPID5GH1_SHIFT 8
++#define SSB_SPROM4_TXPID5GH23 0x0070 /* TX Power Index 5GHz high subband */
++#define SSB_SPROM4_TXPID5GH2 0x00FF
++#define SSB_SPROM4_TXPID5GH2_SHIFT 0
++#define SSB_SPROM4_TXPID5GH3 0xFF00
++#define SSB_SPROM4_TXPID5GH3_SHIFT 8
++#define SSB_SPROM4_MAXP_BG 0x0080 /* Max Power BG in path 1 */
+ #define SSB_SPROM4_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */
+ #define SSB_SPROM4_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
+ #define SSB_SPROM4_ITSSI_BG_SHIFT 8
+-#define SSB_SPROM4_MAXP_A 0x108A /* Max Power A in path 1 */
++#define SSB_SPROM4_MAXP_A 0x008A /* Max Power A in path 1 */
+ #define SSB_SPROM4_MAXP_A_MASK 0x00FF /* Mask for Max Power A */
+ #define SSB_SPROM4_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */
+ #define SSB_SPROM4_ITSSI_A_SHIFT 8
+-#define SSB_SPROM4_GPIOA 0x1056 /* Gen. Purpose IO # 0 and 1 */
+-#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */
+-#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */
+-#define SSB_SPROM4_GPIOA_P1_SHIFT 8
+-#define SSB_SPROM4_GPIOB 0x1058 /* Gen. Purpose IO # 2 and 3 */
+-#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */
+-#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */
+-#define SSB_SPROM4_GPIOB_P3_SHIFT 8
+-#define SSB_SPROM4_PA0B0 0x1082 /* The paXbY locations are */
+-#define SSB_SPROM4_PA0B1 0x1084 /* only guesses */
+-#define SSB_SPROM4_PA0B2 0x1086
+-#define SSB_SPROM4_PA1B0 0x108E
+-#define SSB_SPROM4_PA1B1 0x1090
+-#define SSB_SPROM4_PA1B2 0x1092
++#define SSB_SPROM4_PA0B0 0x0082 /* The paXbY locations are */
++#define SSB_SPROM4_PA0B1 0x0084 /* only guesses */
++#define SSB_SPROM4_PA0B2 0x0086
++#define SSB_SPROM4_PA1B0 0x008E
++#define SSB_SPROM4_PA1B1 0x0090
++#define SSB_SPROM4_PA1B2 0x0092
+
+ /* SPROM Revision 5 (inherits most data from rev 4) */
+-#define SSB_SPROM5_BFLLO 0x104A /* Boardflags (low 16 bits) */
+-#define SSB_SPROM5_BFLHI 0x104C /* Board Flags Hi */
+-#define SSB_SPROM5_IL0MAC 0x1052 /* 6 byte MAC address for a/b/g/n */
+-#define SSB_SPROM5_CCODE 0x1044 /* Country Code (2 bytes) */
+-#define SSB_SPROM5_GPIOA 0x1076 /* Gen. Purpose IO # 0 and 1 */
++#define SSB_SPROM5_CCODE 0x0044 /* Country Code (2 bytes) */
++#define SSB_SPROM5_BFLLO 0x004A /* Boardflags (low 16 bits) */
++#define SSB_SPROM5_BFLHI 0x004C /* Board Flags Hi */
++#define SSB_SPROM5_BFL2LO 0x004E /* Board flags 2 (low 16 bits) */
++#define SSB_SPROM5_BFL2HI 0x0050 /* Board flags 2 Hi */
++#define SSB_SPROM5_IL0MAC 0x0052 /* 6 byte MAC address for a/b/g/n */
++#define SSB_SPROM5_GPIOA 0x0076 /* Gen. Purpose IO # 0 and 1 */
+ #define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */
+ #define SSB_SPROM5_GPIOA_P1 0xFF00 /* Pin 1 */
+ #define SSB_SPROM5_GPIOA_P1_SHIFT 8
+-#define SSB_SPROM5_GPIOB 0x1078 /* Gen. Purpose IO # 2 and 3 */
++#define SSB_SPROM5_GPIOB 0x0078 /* Gen. Purpose IO # 2 and 3 */
+ #define SSB_SPROM5_GPIOB_P2 0x00FF /* Pin 2 */
+ #define SSB_SPROM5_GPIOB_P3 0xFF00 /* Pin 3 */
#define SSB_SPROM5_GPIOB_P3_SHIFT 8
/* SPROM Revision 8 */
-#define SSB_SPROM8_BFLLO 0x1084 /* Boardflags (low 16 bits) */
-#define SSB_SPROM8_BFLHI 0x1086 /* Boardflags Hi */
-+#define SSB_SPROM8_BOARDREV 0x1082 /* Board revision */
-+#define SSB_SPROM8_BFLLO 0x1084 /* Board flags (bits 0-15) */
-+#define SSB_SPROM8_BFLHI 0x1086 /* Board flags (bits 16-31) */
-+#define SSB_SPROM8_BFL2LO 0x1088 /* Board flags (bits 32-47) */
-+#define SSB_SPROM8_BFL2HI 0x108A /* Board flags (bits 48-63) */
- #define SSB_SPROM8_IL0MAC 0x108C /* 6 byte MAC address */
- #define SSB_SPROM8_CCODE 0x1092 /* 2 byte country code */
- #define SSB_SPROM8_ANTAVAIL 0x109C /* Antenna available bitfields*/
-@@ -354,14 +357,63 @@
- #define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */
- #define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */
- #define SSB_SPROM8_GPIOB_P3_SHIFT 8
+-#define SSB_SPROM8_IL0MAC 0x108C /* 6 byte MAC address */
+-#define SSB_SPROM8_CCODE 0x1092 /* 2 byte country code */
+-#define SSB_SPROM8_ANTAVAIL 0x109C /* Antenna available bitfields*/
+-#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */
+-#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8
+-#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */
+-#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0
+-#define SSB_SPROM8_AGAIN01 0x109E /* Antenna Gain (in dBm Q5.2) */
++#define SSB_SPROM8_BOARDREV 0x0082 /* Board revision */
++#define SSB_SPROM8_BFLLO 0x0084 /* Board flags (bits 0-15) */
++#define SSB_SPROM8_BFLHI 0x0086 /* Board flags (bits 16-31) */
++#define SSB_SPROM8_BFL2LO 0x0088 /* Board flags (bits 32-47) */
++#define SSB_SPROM8_BFL2HI 0x008A /* Board flags (bits 48-63) */
++#define SSB_SPROM8_IL0MAC 0x008C /* 6 byte MAC address */
++#define SSB_SPROM8_CCODE 0x0092 /* 2 byte country code */
++#define SSB_SPROM8_GPIOA 0x0096 /*Gen. Purpose IO # 0 and 1 */
++#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */
++#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */
++#define SSB_SPROM8_GPIOA_P1_SHIFT 8
++#define SSB_SPROM8_GPIOB 0x0098 /* Gen. Purpose IO # 2 and 3 */
++#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */
++#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */
++#define SSB_SPROM8_GPIOB_P3_SHIFT 8
++#define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/
++#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */
++#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8
++#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */
++#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0
++#define SSB_SPROM8_AGAIN01 0x009E /* Antenna Gain (in dBm Q5.2) */
+ #define SSB_SPROM8_AGAIN0 0x00FF /* Antenna 0 */
+ #define SSB_SPROM8_AGAIN0_SHIFT 0
+ #define SSB_SPROM8_AGAIN1 0xFF00 /* Antenna 1 */
+ #define SSB_SPROM8_AGAIN1_SHIFT 8
+-#define SSB_SPROM8_AGAIN23 0x10A0
++#define SSB_SPROM8_AGAIN23 0x00A0
+ #define SSB_SPROM8_AGAIN2 0x00FF /* Antenna 2 */
+ #define SSB_SPROM8_AGAIN2_SHIFT 0
+ #define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */
+ #define SSB_SPROM8_AGAIN3_SHIFT 8
+-#define SSB_SPROM8_GPIOA 0x1096 /*Gen. Purpose IO # 0 and 1 */
+-#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */
+-#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */
+-#define SSB_SPROM8_GPIOA_P1_SHIFT 8
+-#define SSB_SPROM8_GPIOB 0x1098 /* Gen. Purpose IO # 2 and 3 */
+-#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */
+-#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */
+-#define SSB_SPROM8_GPIOB_P3_SHIFT 8
-#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power BG in path 1 */
-#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */
-+#define SSB_SPROM8_RSSIPARM2G 0x10A4 /* RSSI params for 2GHz */
++#define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */
+#define SSB_SPROM8_RSSISMF2G 0x000F
+#define SSB_SPROM8_RSSISMC2G 0x00F0
+#define SSB_SPROM8_RSSISMC2G_SHIFT 4
+#define SSB_SPROM8_RSSISAV2G_SHIFT 8
+#define SSB_SPROM8_BXA2G 0x1800
+#define SSB_SPROM8_BXA2G_SHIFT 11
-+#define SSB_SPROM8_RSSIPARM5G 0x10A6 /* RSSI params for 5GHz */
++#define SSB_SPROM8_RSSIPARM5G 0x00A6 /* RSSI params for 5GHz */
+#define SSB_SPROM8_RSSISMF5G 0x000F
+#define SSB_SPROM8_RSSISMC5G 0x00F0
+#define SSB_SPROM8_RSSISMC5G_SHIFT 4
+#define SSB_SPROM8_RSSISAV5G_SHIFT 8
+#define SSB_SPROM8_BXA5G 0x1800
+#define SSB_SPROM8_BXA5G_SHIFT 11
-+#define SSB_SPROM8_TRI25G 0x10A8 /* TX isolation 2.4&5.3GHz */
++#define SSB_SPROM8_TRI25G 0x00A8 /* TX isolation 2.4&5.3GHz */
+#define SSB_SPROM8_TRI2G 0x00FF /* TX isolation 2.4GHz */
+#define SSB_SPROM8_TRI5G 0xFF00 /* TX isolation 5.3GHz */
+#define SSB_SPROM8_TRI5G_SHIFT 8
-+#define SSB_SPROM8_TRI5GHL 0x10AA /* TX isolation 5.2/5.8GHz */
++#define SSB_SPROM8_TRI5GHL 0x00AA /* TX isolation 5.2/5.8GHz */
+#define SSB_SPROM8_TRI5GL 0x00FF /* TX isolation 5.2GHz */
+#define SSB_SPROM8_TRI5GH 0xFF00 /* TX isolation 5.8GHz */
+#define SSB_SPROM8_TRI5GH_SHIFT 8
-+#define SSB_SPROM8_RXPO 0x10AC /* RX power offsets */
++#define SSB_SPROM8_RXPO 0x00AC /* RX power offsets */
+#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */
+#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */
+#define SSB_SPROM8_RXPO5G_SHIFT 8
-+#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power 2GHz in path 1 */
++#define SSB_SPROM8_FEM2G 0x00AE
++#define SSB_SPROM8_FEM5G 0x00B0
++#define SSB_SROM8_FEM_TSSIPOS 0x0001
++#define SSB_SROM8_FEM_TSSIPOS_SHIFT 0
++#define SSB_SROM8_FEM_EXTPA_GAIN 0x0006
++#define SSB_SROM8_FEM_EXTPA_GAIN_SHIFT 1
++#define SSB_SROM8_FEM_PDET_RANGE 0x00F8
++#define SSB_SROM8_FEM_PDET_RANGE_SHIFT 3
++#define SSB_SROM8_FEM_TR_ISO 0x0700
++#define SSB_SROM8_FEM_TR_ISO_SHIFT 8
++#define SSB_SROM8_FEM_ANTSWLUT 0xF800
++#define SSB_SROM8_FEM_ANTSWLUT_SHIFT 11
++#define SSB_SPROM8_THERMAL 0x00B2
++#define SSB_SPROM8_MPWR_RAWTS 0x00B4
++#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6
++#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8
++#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA
++
++/* There are 4 blocks with power info sharing the same layout */
++#define SSB_SROM8_PWR_INFO_CORE0 0x00C0
++#define SSB_SROM8_PWR_INFO_CORE1 0x00E0
++#define SSB_SROM8_PWR_INFO_CORE2 0x0100
++#define SSB_SROM8_PWR_INFO_CORE3 0x0120
++
++#define SSB_SROM8_2G_MAXP_ITSSI 0x00
++#define SSB_SPROM8_2G_MAXP 0x00FF
++#define SSB_SPROM8_2G_ITSSI 0xFF00
++#define SSB_SPROM8_2G_ITSSI_SHIFT 8
++#define SSB_SROM8_2G_PA_0 0x02 /* 2GHz power amp settings */
++#define SSB_SROM8_2G_PA_1 0x04
++#define SSB_SROM8_2G_PA_2 0x06
++#define SSB_SROM8_5G_MAXP_ITSSI 0x08 /* 5GHz ITSSI and 5.3GHz Max Power */
++#define SSB_SPROM8_5G_MAXP 0x00FF
++#define SSB_SPROM8_5G_ITSSI 0xFF00
++#define SSB_SPROM8_5G_ITSSI_SHIFT 8
++#define SSB_SPROM8_5GHL_MAXP 0x0A /* 5.2GHz and 5.8GHz Max Power */
++#define SSB_SPROM8_5GH_MAXP 0x00FF
++#define SSB_SPROM8_5GL_MAXP 0xFF00
++#define SSB_SPROM8_5GL_MAXP_SHIFT 8
++#define SSB_SROM8_5G_PA_0 0x0C /* 5.3GHz power amp settings */
++#define SSB_SROM8_5G_PA_1 0x0E
++#define SSB_SROM8_5G_PA_2 0x10
++#define SSB_SROM8_5GL_PA_0 0x12 /* 5.2GHz power amp settings */
++#define SSB_SROM8_5GL_PA_1 0x14
++#define SSB_SROM8_5GL_PA_2 0x16
++#define SSB_SROM8_5GH_PA_0 0x18 /* 5.8GHz power amp settings */
++#define SSB_SROM8_5GH_PA_1 0x1A
++#define SSB_SROM8_5GH_PA_2 0x1C
++
++/* TODO: Make it deprecated */
++#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */
+#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
#define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
#define SSB_SPROM8_ITSSI_BG_SHIFT 8
-#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power A in path 1 */
-#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power A */
-+#define SSB_SPROM8_PA0B0 0x10C2 /* 2GHz power amp settings */
-+#define SSB_SPROM8_PA0B1 0x10C4
-+#define SSB_SPROM8_PA0B2 0x10C6
-+#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power 5.3GHz */
++#define SSB_SPROM8_PA0B0 0x00C2 /* 2GHz power amp settings */
++#define SSB_SPROM8_PA0B1 0x00C4
++#define SSB_SPROM8_PA0B2 0x00C6
++#define SSB_SPROM8_MAXP_A 0x00C8 /* Max Power 5.3GHz */
+#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power 5.3GHz */
#define SSB_SPROM8_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */
#define SSB_SPROM8_ITSSI_A_SHIFT 8
-+#define SSB_SPROM8_MAXP_AHL 0x10CA /* Max Power 5.2/5.8GHz */
++#define SSB_SPROM8_MAXP_AHL 0x00CA /* Max Power 5.2/5.8GHz */
+#define SSB_SPROM8_MAXP_AH_MASK 0x00FF /* Mask for Max Power 5.8GHz */
+#define SSB_SPROM8_MAXP_AL_MASK 0xFF00 /* Mask for Max Power 5.2GHz */
+#define SSB_SPROM8_MAXP_AL_SHIFT 8
-+#define SSB_SPROM8_PA1B0 0x10CC /* 5.3GHz power amp settings */
-+#define SSB_SPROM8_PA1B1 0x10CE
-+#define SSB_SPROM8_PA1B2 0x10D0
-+#define SSB_SPROM8_PA1LOB0 0x10D2 /* 5.2GHz power amp settings */
-+#define SSB_SPROM8_PA1LOB1 0x10D4
-+#define SSB_SPROM8_PA1LOB2 0x10D6
-+#define SSB_SPROM8_PA1HIB0 0x10D8 /* 5.8GHz power amp settings */
-+#define SSB_SPROM8_PA1HIB1 0x10DA
-+#define SSB_SPROM8_PA1HIB2 0x10DC
-+#define SSB_SPROM8_CCK2GPO 0x1140 /* CCK power offset */
-+#define SSB_SPROM8_OFDM2GPO 0x1142 /* 2.4GHz OFDM power offset */
-+#define SSB_SPROM8_OFDM5GPO 0x1146 /* 5.3GHz OFDM power offset */
-+#define SSB_SPROM8_OFDM5GLPO 0x114A /* 5.2GHz OFDM power offset */
-+#define SSB_SPROM8_OFDM5GHPO 0x114E /* 5.8GHz OFDM power offset */
++#define SSB_SPROM8_PA1B0 0x00CC /* 5.3GHz power amp settings */
++#define SSB_SPROM8_PA1B1 0x00CE
++#define SSB_SPROM8_PA1B2 0x00D0
++#define SSB_SPROM8_PA1LOB0 0x00D2 /* 5.2GHz power amp settings */
++#define SSB_SPROM8_PA1LOB1 0x00D4
++#define SSB_SPROM8_PA1LOB2 0x00D6
++#define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */
++#define SSB_SPROM8_PA1HIB1 0x00DA
++#define SSB_SPROM8_PA1HIB2 0x00DC
++
++#define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */
++#define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */
++#define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */
++#define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */
++#define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */
++
++/* Values for boardflags_lo read from SPROM */
++#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */
++#define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */
++#define SSB_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */
++#define SSB_BFL_RSSI 0x0008 /* software calculates nrssi slope. */
++#define SSB_BFL_ENETSPI 0x0010 /* has ephy roboswitch spi */
++#define SSB_BFL_XTAL_NOSLOW 0x0020 /* no slow clock available */
++#define SSB_BFL_CCKHIPWR 0x0040 /* can do high power CCK transmission */
++#define SSB_BFL_ENETADM 0x0080 /* has ADMtek switch */
++#define SSB_BFL_ENETVLAN 0x0100 /* can do vlan */
++#define SSB_BFL_AFTERBURNER 0x0200 /* supports Afterburner mode */
++#define SSB_BFL_NOPCI 0x0400 /* board leaves PCI floating */
++#define SSB_BFL_FEM 0x0800 /* supports the Front End Module */
++#define SSB_BFL_EXTLNA 0x1000 /* has an external LNA */
++#define SSB_BFL_HGPA 0x2000 /* had high gain PA */
++#define SSB_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */
++#define SSB_BFL_ALTIQ 0x8000 /* alternate I/Q settings */
++
++/* Values for boardflags_hi read from SPROM */
++#define SSB_BFH_NOPA 0x0001 /* has no PA */
++#define SSB_BFH_RSSIINV 0x0002 /* RSSI uses positive slope (not TSSI) */
++#define SSB_BFH_PAREF 0x0004 /* uses the PARef LDO */
++#define SSB_BFH_3TSWITCH 0x0008 /* uses a triple throw switch shared with bluetooth */
++#define SSB_BFH_PHASESHIFT 0x0010 /* can support phase shifter */
++#define SSB_BFH_BUCKBOOST 0x0020 /* has buck/booster */
++#define SSB_BFH_FEM_BT 0x0040 /* has FEM and switch to share antenna with bluetooth */
++
++/* Values for boardflags2_lo read from SPROM */
++#define SSB_BFL2_RXBB_INT_REG_DIS 0x0001 /* external RX BB regulator present */
++#define SSB_BFL2_APLL_WAR 0x0002 /* alternative A-band PLL settings implemented */
++#define SSB_BFL2_TXPWRCTRL_EN 0x0004 /* permits enabling TX Power Control */
++#define SSB_BFL2_2X4_DIV 0x0008 /* 2x4 diversity switch */
++#define SSB_BFL2_5G_PWRGAIN 0x0010 /* supports 5G band power gain */
++#define SSB_BFL2_PCIEWAR_OVR 0x0020 /* overrides ASPM and Clkreq settings */
++#define SSB_BFL2_CAESERS_BRD 0x0040 /* is Caesers board (unused) */
++#define SSB_BFL2_BTC3WIRE 0x0080 /* used 3-wire bluetooth coexist */
++#define SSB_BFL2_SKWRKFEM_BRD 0x0100 /* 4321mcm93 uses Skyworks FEM */
++#define SSB_BFL2_SPUR_WAR 0x0200 /* has a workaround for clock-harmonic spurs */
++#define SSB_BFL2_GPLL_WAR 0x0400 /* altenative G-band PLL settings implemented */
/* Values for SSB_SPROM1_BINF_CCODE */
enum {
+--- a/drivers/ssb/driver_extif.c
++++ b/drivers/ssb/driver_extif.c
+@@ -3,7 +3,7 @@
+ * Broadcom EXTIF core driver
+ *
+ * Copyright 2005, Broadcom Corporation
+- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
+ * Copyright 2006, 2007, Felix Fietkau <nbd@openwrt.org>
+ * Copyright 2007, Aurelien Jarno <aurelien@aurel32.net>
+ *
+--- a/drivers/ssb/embedded.c
++++ b/drivers/ssb/embedded.c
+@@ -3,7 +3,7 @@
+ * Embedded systems support code
+ *
+ * Copyright 2005-2008, Broadcom Corporation
+- * Copyright 2006-2008, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2006-2008, Michael Buesch <m@bues.ch>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
projects / openwrt.git / blobdiff