ar71xx: add kmod-ledtrig-usbdev for the MZK-W04NU profile as well
[openwrt.git] / target / linux / generic / files / drivers / net / phy / ar8216.c
index 4ae61da..93c961c 100644 (file)
@@ -52,7 +52,6 @@ struct ar8216_priv {
        u8 vlan_tagged;
        u16 pvid[AR8216_NUM_PORTS];
 };
-static struct switch_dev athdev;
 
 #define to_ar8216(_dev) container_of(_dev, struct ar8216_priv, dev)
 
@@ -330,8 +329,8 @@ static struct switch_attr ar8216_port[] = {
 static struct switch_attr ar8216_vlan[] = {
        {
                .type = SWITCH_TYPE_INT,
-               .name = "pvid",
-               .description = "VLAN ID",
+               .name = "vid",
+               .description = "VLAN ID (0-4094)",
                .set = ar8216_set_vid,
                .get = ar8216_get_vid,
                .max = 4094,
@@ -631,11 +630,34 @@ ar8216_reset_switch(struct switch_dev *dev)
        return ar8216_hw_apply(dev);
 }
 
+
+static const struct switch_dev_ops ar8216_ops = {
+       .attr_global = {
+               .attr = ar8216_globals,
+               .n_attr = ARRAY_SIZE(ar8216_globals),
+       },
+       .attr_port = {
+               .attr = ar8216_port,
+               .n_attr = ARRAY_SIZE(ar8216_port),
+       },
+       .attr_vlan = {
+               .attr = ar8216_vlan,
+               .n_attr = ARRAY_SIZE(ar8216_vlan),
+       },
+       .get_port_pvid = ar8216_get_pvid,
+       .set_port_pvid = ar8216_set_pvid,
+       .get_vlan_ports = ar8216_get_ports,
+       .set_vlan_ports = ar8216_set_ports,
+       .apply_config = ar8216_hw_apply,
+       .reset_switch = ar8216_reset_switch,
+};
+
 static int
 ar8216_config_init(struct phy_device *pdev)
 {
        struct ar8216_priv *priv;
        struct net_device *dev = pdev->attached_dev;
+       struct switch_dev *swdev;
        int ret;
 
        priv = kzalloc(sizeof(struct ar8216_priv), GFP_KERNEL);
@@ -667,14 +689,22 @@ ar8216_config_init(struct phy_device *pdev)
        mutex_init(&priv->reg_mutex);
        priv->read = ar8216_mii_read;
        priv->write = ar8216_mii_write;
-       memcpy(&priv->dev, &athdev, sizeof(struct switch_dev));
+
        pdev->priv = priv;
 
+       swdev = &priv->dev;
+       swdev->cpu_port = AR8216_PORT_CPU;
+       swdev->ops = &ar8216_ops;
+
        if (priv->chip == AR8316) {
-               priv->dev.name = "Atheros AR8316";
-               priv->dev.vlans = AR8X16_MAX_VLANS;
+               swdev->name = "Atheros AR8316";
+               swdev->vlans = AR8X16_MAX_VLANS;
                /* port 5 connected to the other mac, therefore unusable */
-               priv->dev.ports = (AR8216_NUM_PORTS - 1);
+               swdev->ports = (AR8216_NUM_PORTS - 1);
+       } else {
+               swdev->name = "Atheros AR8216";
+               swdev->vlans = AR8216_NUM_VLANS;
+               swdev->ports = AR8216_NUM_PORTS;
        }
 
        if ((ret = register_switch(&priv->dev, pdev->attached_dev)) < 0) {
@@ -782,32 +812,6 @@ ar8216_remove(struct phy_device *pdev)
        kfree(priv);
 }
 
-/* template */
-static struct switch_dev athdev = {
-       .name = "Atheros AR8216",
-       .cpu_port = AR8216_PORT_CPU,
-       .ports = AR8216_NUM_PORTS,
-       .vlans = AR8216_NUM_VLANS,
-       .attr_global = {
-               .attr = ar8216_globals,
-               .n_attr = ARRAY_SIZE(ar8216_globals),
-       },
-       .attr_port = {
-               .attr = ar8216_port,
-               .n_attr = ARRAY_SIZE(ar8216_port),
-       },
-       .attr_vlan = {
-               .attr = ar8216_vlan,
-               .n_attr = ARRAY_SIZE(ar8216_vlan),
-       },
-       .get_port_pvid = ar8216_get_pvid,
-       .set_port_pvid = ar8216_set_pvid,
-       .get_vlan_ports = ar8216_get_ports,
-       .set_vlan_ports = ar8216_set_ports,
-       .apply_config = ar8216_hw_apply,
-       .reset_switch = ar8216_reset_switch,
-};
-
 static struct phy_driver ar8216_driver = {
        .phy_id         = 0x004d0000,
        .name           = "Atheros AR8216/AR8316",
This page took 0.034206 seconds and 4 git commands to generate.