+-int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
+- struct ssb_init_invariants *iv)
++static int ssb_pcmcia_get_mac(struct pcmcia_device *p_dev,
++ tuple_t *tuple,
++ void *priv)
++{
++ struct ssb_sprom *sprom = priv;
++
++ if (tuple->TupleData[0] != CISTPL_FUNCE_LAN_NODE_ID)
++ return -EINVAL;
++ if (tuple->TupleDataLen != ETH_ALEN + 2)
++ return -EINVAL;
++ if (tuple->TupleData[1] != ETH_ALEN)
++ return -EINVAL;
++ memcpy(sprom->il0mac, &tuple->TupleData[2], ETH_ALEN);
++ return 0;
++};
++
++static int ssb_pcmcia_do_get_invariants(struct pcmcia_device *p_dev,
++ tuple_t *tuple,
++ void *priv)
+ {
+- tuple_t tuple;
+- int res;
+- unsigned char buf[32];
++ struct ssb_init_invariants *iv = priv;
+ struct ssb_sprom *sprom = &iv->sprom;
+ struct ssb_boardinfo *bi = &iv->boardinfo;
+ const char *error_description;
+
++ GOTO_ERROR_ON(tuple->TupleDataLen < 1, "VEN tpl < 1");
++ switch (tuple->TupleData[0]) {
++ case SSB_PCMCIA_CIS_ID:
++ GOTO_ERROR_ON((tuple->TupleDataLen != 5) &&
++ (tuple->TupleDataLen != 7),
++ "id tpl size");
++ bi->vendor = tuple->TupleData[1] |
++ ((u16)tuple->TupleData[2] << 8);
++ break;
++ case SSB_PCMCIA_CIS_BOARDREV:
++ GOTO_ERROR_ON(tuple->TupleDataLen != 2,
++ "boardrev tpl size");
++ sprom->board_rev = tuple->TupleData[1];
++ break;
++ case SSB_PCMCIA_CIS_PA:
++ GOTO_ERROR_ON((tuple->TupleDataLen != 9) &&
++ (tuple->TupleDataLen != 10),
++ "pa tpl size");
++ sprom->pa0b0 = tuple->TupleData[1] |
++ ((u16)tuple->TupleData[2] << 8);
++ sprom->pa0b1 = tuple->TupleData[3] |
++ ((u16)tuple->TupleData[4] << 8);
++ sprom->pa0b2 = tuple->TupleData[5] |
++ ((u16)tuple->TupleData[6] << 8);
++ sprom->itssi_a = tuple->TupleData[7];
++ sprom->itssi_bg = tuple->TupleData[7];
++ sprom->maxpwr_a = tuple->TupleData[8];
++ sprom->maxpwr_bg = tuple->TupleData[8];
++ break;
++ case SSB_PCMCIA_CIS_OEMNAME:
++ /* We ignore this. */
++ break;
++ case SSB_PCMCIA_CIS_CCODE:
++ GOTO_ERROR_ON(tuple->TupleDataLen != 2,
++ "ccode tpl size");
++ sprom->country_code = tuple->TupleData[1];
++ break;
++ case SSB_PCMCIA_CIS_ANTENNA:
++ GOTO_ERROR_ON(tuple->TupleDataLen != 2,
++ "ant tpl size");
++ sprom->ant_available_a = tuple->TupleData[1];
++ sprom->ant_available_bg = tuple->TupleData[1];
++ break;
++ case SSB_PCMCIA_CIS_ANTGAIN:
++ GOTO_ERROR_ON(tuple->TupleDataLen != 2,
++ "antg tpl size");
++ sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1];
++ sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1];
++ sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1];
++ sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1];
++ sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1];
++ sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1];
++ sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1];
++ sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1];
++ break;
++ case SSB_PCMCIA_CIS_BFLAGS:
++ GOTO_ERROR_ON((tuple->TupleDataLen != 3) &&
++ (tuple->TupleDataLen != 5),
++ "bfl tpl size");
++ sprom->boardflags_lo = tuple->TupleData[1] |
++ ((u16)tuple->TupleData[2] << 8);
++ break;
++ case SSB_PCMCIA_CIS_LEDS:
++ GOTO_ERROR_ON(tuple->TupleDataLen != 5,
++ "leds tpl size");
++ sprom->gpio0 = tuple->TupleData[1];
++ sprom->gpio1 = tuple->TupleData[2];
++ sprom->gpio2 = tuple->TupleData[3];
++ sprom->gpio3 = tuple->TupleData[4];
++ break;
++ }
++ return -ENOSPC; /* continue with next entry */
++
++error:
++ ssb_printk(KERN_ERR PFX
++ "PCMCIA: Failed to fetch device invariants: %s\n",
++ error_description);
++ return -ENODEV;
++}
++
++
++int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
++ struct ssb_init_invariants *iv)
++{
++ struct ssb_sprom *sprom = &iv->sprom;
++ int res;
++
+ memset(sprom, 0xFF, sizeof(*sprom));
+ sprom->revision = 1;
+ sprom->boardflags_lo = 0;
+ sprom->boardflags_hi = 0;
+
+ /* First fetch the MAC address. */
+- memset(&tuple, 0, sizeof(tuple));
+- tuple.DesiredTuple = CISTPL_FUNCE;
+- tuple.TupleData = buf;
+- tuple.TupleDataMax = sizeof(buf);
+- res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple);
+- GOTO_ERROR_ON(res != 0, "MAC first tpl");
+- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
+- GOTO_ERROR_ON(res != 0, "MAC first tpl data");
+- while (1) {
+- GOTO_ERROR_ON(tuple.TupleDataLen < 1, "MAC tpl < 1");
+- if (tuple.TupleData[0] == CISTPL_FUNCE_LAN_NODE_ID)
+- break;
+- res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple);
+- GOTO_ERROR_ON(res != 0, "MAC next tpl");
+- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
+- GOTO_ERROR_ON(res != 0, "MAC next tpl data");
++ res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE,
++ ssb_pcmcia_get_mac, sprom);
++ if (res != 0) {
++ ssb_printk(KERN_ERR PFX
++ "PCMCIA: Failed to fetch MAC address\n");
++ return -ENODEV;
+ }
+- GOTO_ERROR_ON(tuple.TupleDataLen != ETH_ALEN + 2, "MAC tpl size");
+- memcpy(sprom->il0mac, &tuple.TupleData[2], ETH_ALEN);
+
+ /* Fetch the vendor specific tuples. */
+- memset(&tuple, 0, sizeof(tuple));
+- tuple.DesiredTuple = SSB_PCMCIA_CIS;
+- tuple.TupleData = buf;
+- tuple.TupleDataMax = sizeof(buf);
+- res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple);
+- GOTO_ERROR_ON(res != 0, "VEN first tpl");
+- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
+- GOTO_ERROR_ON(res != 0, "VEN first tpl data");
+- while (1) {
+- GOTO_ERROR_ON(tuple.TupleDataLen < 1, "VEN tpl < 1");
+- switch (tuple.TupleData[0]) {
+- case SSB_PCMCIA_CIS_ID:
+- GOTO_ERROR_ON((tuple.TupleDataLen != 5) &&
+- (tuple.TupleDataLen != 7),
+- "id tpl size");
+- bi->vendor = tuple.TupleData[1] |
+- ((u16)tuple.TupleData[2] << 8);
+- break;
+- case SSB_PCMCIA_CIS_BOARDREV:
+- GOTO_ERROR_ON(tuple.TupleDataLen != 2,
+- "boardrev tpl size");
+- sprom->board_rev = tuple.TupleData[1];
+- break;
+- case SSB_PCMCIA_CIS_PA:
+- GOTO_ERROR_ON(tuple.TupleDataLen != 9,
+- "pa tpl size");
+- sprom->pa0b0 = tuple.TupleData[1] |
+- ((u16)tuple.TupleData[2] << 8);
+- sprom->pa0b1 = tuple.TupleData[3] |
+- ((u16)tuple.TupleData[4] << 8);
+- sprom->pa0b2 = tuple.TupleData[5] |
+- ((u16)tuple.TupleData[6] << 8);
+- sprom->itssi_a = tuple.TupleData[7];
+- sprom->itssi_bg = tuple.TupleData[7];
+- sprom->maxpwr_a = tuple.TupleData[8];
+- sprom->maxpwr_bg = tuple.TupleData[8];
+- break;
+- case SSB_PCMCIA_CIS_OEMNAME:
+- /* We ignore this. */
+- break;
+- case SSB_PCMCIA_CIS_CCODE:
+- GOTO_ERROR_ON(tuple.TupleDataLen != 2,
+- "ccode tpl size");
+- sprom->country_code = tuple.TupleData[1];
+- break;
+- case SSB_PCMCIA_CIS_ANTENNA:
+- GOTO_ERROR_ON(tuple.TupleDataLen != 2,
+- "ant tpl size");
+- sprom->ant_available_a = tuple.TupleData[1];
+- sprom->ant_available_bg = tuple.TupleData[1];
+- break;
+- case SSB_PCMCIA_CIS_ANTGAIN:
+- GOTO_ERROR_ON(tuple.TupleDataLen != 2,
+- "antg tpl size");
+- sprom->antenna_gain.ghz24.a0 = tuple.TupleData[1];
+- sprom->antenna_gain.ghz24.a1 = tuple.TupleData[1];
+- sprom->antenna_gain.ghz24.a2 = tuple.TupleData[1];
+- sprom->antenna_gain.ghz24.a3 = tuple.TupleData[1];
+- sprom->antenna_gain.ghz5.a0 = tuple.TupleData[1];
+- sprom->antenna_gain.ghz5.a1 = tuple.TupleData[1];
+- sprom->antenna_gain.ghz5.a2 = tuple.TupleData[1];
+- sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1];
+- break;
+- case SSB_PCMCIA_CIS_BFLAGS:
+- GOTO_ERROR_ON(tuple.TupleDataLen != 3,
+- "bfl tpl size");
+- sprom->boardflags_lo = tuple.TupleData[1] |
+- ((u16)tuple.TupleData[2] << 8);
+- break;
+- case SSB_PCMCIA_CIS_LEDS:
+- GOTO_ERROR_ON(tuple.TupleDataLen != 5,
+- "leds tpl size");
+- sprom->gpio0 = tuple.TupleData[1];
+- sprom->gpio1 = tuple.TupleData[2];
+- sprom->gpio2 = tuple.TupleData[3];
+- sprom->gpio3 = tuple.TupleData[4];
+- break;
+- }
+- res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple);
+- if (res == -ENOSPC)
+- break;
+- GOTO_ERROR_ON(res != 0, "VEN next tpl");
+- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
+- GOTO_ERROR_ON(res != 0, "VEN next tpl data");
+- }
++ res = pcmcia_loop_tuple(bus->host_pcmcia, SSB_PCMCIA_CIS,
++ ssb_pcmcia_do_get_invariants, iv);
++ if ((res == 0) || (res == -ENOSPC))
++ return 0;
+
+- return 0;
+-error:
+ ssb_printk(KERN_ERR PFX
+- "PCMCIA: Failed to fetch device invariants: %s\n",
+- error_description);
++ "PCMCIA: Failed to fetch device invariants\n");
+ return -ENODEV;
+ }
+
+--- a/drivers/ssb/scan.c
++++ b/drivers/ssb/scan.c
+@@ -2,7 +2,7 @@
+ * Sonics Silicon Backplane
+ * Bus scanning
+ *
+- * Copyright (C) 2005-2007 Michael Buesch <mb@bu3sch.de>
++ * Copyright (C) 2005-2007 Michael Buesch <m@bues.ch>
+ * Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
+ * Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
+ * Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
+@@ -162,6 +162,8 @@ static u8 chipid_to_nrcores(u16 chipid)
+ static u32 scan_read32(struct ssb_bus *bus, u8 current_coreidx,
+ u16 offset)
+ {
++ u32 lo, hi;
++
+ switch (bus->bustype) {
+ case SSB_BUSTYPE_SSB:
+ offset += current_coreidx * SSB_CORE_SIZE;
+@@ -174,7 +176,12 @@ static u32 scan_read32(struct ssb_bus *b
+ offset -= 0x800;
+ } else
+ ssb_pcmcia_switch_segment(bus, 0);
+- break;
++ lo = readw(bus->mmio + offset);
++ hi = readw(bus->mmio + offset + 2);
++ return lo | (hi << 16);
++ case SSB_BUSTYPE_SDIO:
++ offset += current_coreidx * SSB_CORE_SIZE;
++ return ssb_sdio_scan_read32(bus, offset);
+ }
+ return readl(bus->mmio + offset);
+ }
+@@ -188,6 +195,8 @@ static int scan_switchcore(struct ssb_bu
+ return ssb_pci_switch_coreidx(bus, coreidx);
+ case SSB_BUSTYPE_PCMCIA:
+ return ssb_pcmcia_switch_coreidx(bus, coreidx);
++ case SSB_BUSTYPE_SDIO:
++ return ssb_sdio_scan_switch_coreidx(bus, coreidx);
+ }
+ return 0;
+ }
+@@ -206,6 +215,8 @@ void ssb_iounmap(struct ssb_bus *bus)
+ SSB_BUG_ON(1); /* Can't reach this code. */
+ #endif
+ break;
++ case SSB_BUSTYPE_SDIO:
++ break;
+ }
+ bus->mmio = NULL;
+ bus->mapped_device = NULL;
+@@ -230,6 +241,10 @@ static void __iomem *ssb_ioremap(struct
+ SSB_BUG_ON(1); /* Can't reach this code. */
+ #endif
+ break;
++ case SSB_BUSTYPE_SDIO:
++ /* Nothing to ioremap in the SDIO case, just fake it */
++ mmio = (void __iomem *)baseaddr;
++ break;
+ }
+
+ return mmio;
+@@ -245,7 +260,10 @@ static int we_support_multiple_80211_cor
+ #ifdef CONFIG_SSB_PCIHOST
+ if (bus->bustype == SSB_BUSTYPE_PCI) {
+ if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM &&
+- bus->host_pci->device == 0x4324)
++ ((bus->host_pci->device == 0x4313) ||
++ (bus->host_pci->device == 0x431A) ||
++ (bus->host_pci->device == 0x4321) ||
++ (bus->host_pci->device == 0x4324)))
+ return 1;
+ }
+ #endif /* CONFIG_SSB_PCIHOST */
+@@ -294,8 +312,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ } else {
+ if (bus->bustype == SSB_BUSTYPE_PCI) {
+ bus->chip_id = pcidev_to_chipid(bus->host_pci);
+- pci_read_config_word(bus->host_pci, PCI_REVISION_ID,
+- &bus->chip_rev);
++ bus->chip_rev = bus->host_pci->revision;
+ bus->chip_package = 0;
+ } else {
+ bus->chip_id = 0x4710;
+@@ -339,7 +356,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ dev->bus = bus;
+ dev->ops = bus->ops;
+
+- ssb_dprintk(KERN_INFO PFX
++ printk(KERN_DEBUG PFX
+ "Core %d found: %s "
+ "(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n",
+ i, ssb_core_name(dev->id.coreid),
+@@ -407,6 +424,16 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ bus->pcicore.dev = dev;
+ #endif /* CONFIG_SSB_DRIVER_PCICORE */
+ break;
++ case SSB_DEV_ETHERNET:
++ if (bus->bustype == SSB_BUSTYPE_PCI) {
++ if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM &&
++ (bus->host_pci->device & 0xFF00) == 0x4300) {
++ /* This is a dangling ethernet core on a
++ * wireless device. Ignore it. */
++ continue;
++ }
++ }
++ break;
+ default:
+ break;
+ }
+--- /dev/null
++++ b/drivers/ssb/sdio.c
+@@ -0,0 +1,610 @@
++/*
++ * Sonics Silicon Backplane
++ * SDIO-Hostbus related functions
++ *
++ * Copyright 2009 Albert Herranz <albert_herranz@yahoo.es>
++ *
++ * Based on drivers/ssb/pcmcia.c
++ * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
++ * Copyright 2007-2008 Michael Buesch <m@bues.ch>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ *
++ */
++
++#include <linux/ssb/ssb.h>
++#include <linux/delay.h>
++#include <linux/io.h>
++#include <linux/etherdevice.h>
++#include <linux/mmc/sdio_func.h>
++
++#include "ssb_private.h"
++
++/* Define the following to 1 to enable a printk on each coreswitch. */
++#define SSB_VERBOSE_SDIOCORESWITCH_DEBUG 0
++
++
++/* Hardware invariants CIS tuples */
++#define SSB_SDIO_CIS 0x80
++#define SSB_SDIO_CIS_SROMREV 0x00
++#define SSB_SDIO_CIS_ID 0x01
++#define SSB_SDIO_CIS_BOARDREV 0x02
++#define SSB_SDIO_CIS_PA 0x03
++#define SSB_SDIO_CIS_PA_PA0B0_LO 0
++#define SSB_SDIO_CIS_PA_PA0B0_HI 1
++#define SSB_SDIO_CIS_PA_PA0B1_LO 2
++#define SSB_SDIO_CIS_PA_PA0B1_HI 3
++#define SSB_SDIO_CIS_PA_PA0B2_LO 4
++#define SSB_SDIO_CIS_PA_PA0B2_HI 5
++#define SSB_SDIO_CIS_PA_ITSSI 6
++#define SSB_SDIO_CIS_PA_MAXPOW 7
++#define SSB_SDIO_CIS_OEMNAME 0x04
++#define SSB_SDIO_CIS_CCODE 0x05
++#define SSB_SDIO_CIS_ANTENNA 0x06
++#define SSB_SDIO_CIS_ANTGAIN 0x07
++#define SSB_SDIO_CIS_BFLAGS 0x08
++#define SSB_SDIO_CIS_LEDS 0x09
++
++#define CISTPL_FUNCE_LAN_NODE_ID 0x04 /* same as in PCMCIA */
++
++
++/*
++ * Function 1 miscellaneous registers.
++ *
++ * Definitions match src/include/sbsdio.h from the
++ * Android Open Source Project
++ * http://android.git.kernel.org/?p=platform/system/wlan/broadcom.git
++ *
++ */
++#define SBSDIO_FUNC1_SBADDRLOW 0x1000a /* SB Address window Low (b15) */
++#define SBSDIO_FUNC1_SBADDRMID 0x1000b /* SB Address window Mid (b23-b16) */
++#define SBSDIO_FUNC1_SBADDRHIGH 0x1000c /* SB Address window High (b24-b31) */
++
++/* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */
++#define SBSDIO_SBADDRLOW_MASK 0x80 /* Valid address bits in SBADDRLOW */
++#define SBSDIO_SBADDRMID_MASK 0xff /* Valid address bits in SBADDRMID */
++#define SBSDIO_SBADDRHIGH_MASK 0xff /* Valid address bits in SBADDRHIGH */
++
++#define SBSDIO_SB_OFT_ADDR_MASK 0x7FFF /* sb offset addr is <= 15 bits, 32k */
++
++/* REVISIT: this flag doesn't seem to matter */
++#define SBSDIO_SB_ACCESS_2_4B_FLAG 0x8000 /* forces 32-bit SB access */
++
++
++/*
++ * Address map within the SDIO function address space (128K).
++ *
++ * Start End Description
++ * ------- ------- ------------------------------------------
++ * 0x00000 0x0ffff selected backplane address window (64K)
++ * 0x10000 0x1ffff backplane control registers (max 64K)
++ *
++ * The current address window is configured by writing to registers
++ * SBADDRLOW, SBADDRMID and SBADDRHIGH.
++ *
++ * In order to access the contents of a 32-bit Silicon Backplane address
++ * the backplane address window must be first loaded with the highest
++ * 16 bits of the target address. Then, an access must be done to the
++ * SDIO function address space using the lower 15 bits of the address.
++ * Bit 15 of the address must be set when doing 32 bit accesses.
++ *
++ * 10987654321098765432109876543210
++ * WWWWWWWWWWWWWWWWW SB Address Window
++ * OOOOOOOOOOOOOOOO Offset within SB Address Window
++ * a 32-bit access flag
++ */
++
++
++/*
++ * SSB I/O via SDIO.
++ *
++ * NOTE: SDIO address @addr is 17 bits long (SDIO address space is 128K).
++ */
++
++static inline struct device *ssb_sdio_dev(struct ssb_bus *bus)
++{
++ return &bus->host_sdio->dev;
++}
++
++/* host claimed */
++static int ssb_sdio_writeb(struct ssb_bus *bus, unsigned int addr, u8 val)
++{
++ int error = 0;
++
++ sdio_writeb(bus->host_sdio, val, addr, &error);
++ if (unlikely(error)) {
++ dev_dbg(ssb_sdio_dev(bus), "%08X <- %02x, error %d\n",
++ addr, val, error);
++ }
++
++ return error;
++}
++
++#if 0
++static u8 ssb_sdio_readb(struct ssb_bus *bus, unsigned int addr)
++{
++ u8 val;
++ int error = 0;
++
++ val = sdio_readb(bus->host_sdio, addr, &error);
++ if (unlikely(error)) {
++ dev_dbg(ssb_sdio_dev(bus), "%08X -> %02x, error %d\n",
++ addr, val, error);
++ }
++
++ return val;
++}
++#endif
++
++/* host claimed */
++static int ssb_sdio_set_sbaddr_window(struct ssb_bus *bus, u32 address)
++{
++ int error;
++
++ error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRLOW,
++ (address >> 8) & SBSDIO_SBADDRLOW_MASK);
++ if (error)
++ goto out;
++ error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRMID,
++ (address >> 16) & SBSDIO_SBADDRMID_MASK);
++ if (error)
++ goto out;
++ error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRHIGH,
++ (address >> 24) & SBSDIO_SBADDRHIGH_MASK);
++ if (error)
++ goto out;
++ bus->sdio_sbaddr = address;
++out:
++ if (error) {
++ dev_dbg(ssb_sdio_dev(bus), "failed to set address window"
++ " to 0x%08x, error %d\n", address, error);
++ }
++
++ return error;
++}
++
++/* for enumeration use only */
++u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset)
++{
++ u32 val;
++ int error;
++
++ sdio_claim_host(bus->host_sdio);
++ val = sdio_readl(bus->host_sdio, offset, &error);
++ sdio_release_host(bus->host_sdio);
++ if (unlikely(error)) {
++ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %08x, error %d\n",
++ bus->sdio_sbaddr >> 16, offset, val, error);
++ }
++
++ return val;
++}
++
++/* for enumeration use only */
++int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx)
++{
++ u32 sbaddr;
++ int error;
++
++ sbaddr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE;
++ sdio_claim_host(bus->host_sdio);
++ error = ssb_sdio_set_sbaddr_window(bus, sbaddr);
++ sdio_release_host(bus->host_sdio);
++ if (error) {
++ dev_err(ssb_sdio_dev(bus), "failed to switch to core %u,"
++ " error %d\n", coreidx, error);
++ goto out;
++ }
++out:
++ return error;
++}
++
++/* host must be already claimed */
++int ssb_sdio_switch_core(struct ssb_bus *bus, struct ssb_device *dev)
++{
++ u8 coreidx = dev->core_index;
++ u32 sbaddr;
++ int error = 0;
++
++ sbaddr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE;
++ if (unlikely(bus->sdio_sbaddr != sbaddr)) {
++#if SSB_VERBOSE_SDIOCORESWITCH_DEBUG
++ dev_info(ssb_sdio_dev(bus),
++ "switching to %s core, index %d\n",
++ ssb_core_name(dev->id.coreid), coreidx);
++#endif
++ error = ssb_sdio_set_sbaddr_window(bus, sbaddr);
++ if (error) {
++ dev_dbg(ssb_sdio_dev(bus), "failed to switch to"
++ " core %u, error %d\n", coreidx, error);
++ goto out;
++ }
++ bus->mapped_device = dev;
++ }
++
++out:
++ return error;
++}
++
++static u8 ssb_sdio_read8(struct ssb_device *dev, u16 offset)
++{
++ struct ssb_bus *bus = dev->bus;
++ u8 val = 0xff;
++ int error = 0;
++
++ sdio_claim_host(bus->host_sdio);
++ if (unlikely(ssb_sdio_switch_core(bus, dev)))
++ goto out;
++ offset |= bus->sdio_sbaddr & 0xffff;
++ offset &= SBSDIO_SB_OFT_ADDR_MASK;
++ val = sdio_readb(bus->host_sdio, offset, &error);
++ if (error) {
++ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %02x, error %d\n",
++ bus->sdio_sbaddr >> 16, offset, val, error);
++ }
++out:
++ sdio_release_host(bus->host_sdio);
++
++ return val;
++}
++
++static u16 ssb_sdio_read16(struct ssb_device *dev, u16 offset)
++{
++ struct ssb_bus *bus = dev->bus;
++ u16 val = 0xffff;
++ int error = 0;
++
++ sdio_claim_host(bus->host_sdio);
++ if (unlikely(ssb_sdio_switch_core(bus, dev)))
++ goto out;
++ offset |= bus->sdio_sbaddr & 0xffff;
++ offset &= SBSDIO_SB_OFT_ADDR_MASK;
++ val = sdio_readw(bus->host_sdio, offset, &error);
++ if (error) {
++ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %04x, error %d\n",
++ bus->sdio_sbaddr >> 16, offset, val, error);
++ }
++out:
++ sdio_release_host(bus->host_sdio);
++
++ return val;
++}
++
++static u32 ssb_sdio_read32(struct ssb_device *dev, u16 offset)
++{
++ struct ssb_bus *bus = dev->bus;
++ u32 val = 0xffffffff;
++ int error = 0;
++
++ sdio_claim_host(bus->host_sdio);
++ if (unlikely(ssb_sdio_switch_core(bus, dev)))
++ goto out;
++ offset |= bus->sdio_sbaddr & 0xffff;
++ offset &= SBSDIO_SB_OFT_ADDR_MASK;
++ offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
++ val = sdio_readl(bus->host_sdio, offset, &error);
++ if (error) {
++ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %08x, error %d\n",
++ bus->sdio_sbaddr >> 16, offset, val, error);
++ }
++out:
++ sdio_release_host(bus->host_sdio);
++
++ return val;
++}
++
++#ifdef CONFIG_SSB_BLOCKIO
++static void ssb_sdio_block_read(struct ssb_device *dev, void *buffer,
++ size_t count, u16 offset, u8 reg_width)
++{
++ size_t saved_count = count;
++ struct ssb_bus *bus = dev->bus;
++ int error = 0;
++
++ sdio_claim_host(bus->host_sdio);
++ if (unlikely(ssb_sdio_switch_core(bus, dev))) {
++ error = -EIO;
++ memset(buffer, 0xff, count);
++ goto err_out;
++ }
++ offset |= bus->sdio_sbaddr & 0xffff;
++ offset &= SBSDIO_SB_OFT_ADDR_MASK;
++
++ switch (reg_width) {
++ case sizeof(u8): {
++ error = sdio_readsb(bus->host_sdio, buffer, offset, count);
++ break;
++ }
++ case sizeof(u16): {
++ SSB_WARN_ON(count & 1);
++ error = sdio_readsb(bus->host_sdio, buffer, offset, count);
++ break;
++ }
++ case sizeof(u32): {
++ SSB_WARN_ON(count & 3);
++ offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
++ error = sdio_readsb(bus->host_sdio, buffer, offset, count);
++ break;
++ }
++ default:
++ SSB_WARN_ON(1);
++ }
++ if (!error)
++ goto out;
++
++err_out:
++ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%zu), error %d\n",
++ bus->sdio_sbaddr >> 16, offset, reg_width, saved_count, error);
++out:
++ sdio_release_host(bus->host_sdio);
++}
++#endif /* CONFIG_SSB_BLOCKIO */
++
++static void ssb_sdio_write8(struct ssb_device *dev, u16 offset, u8 val)
++{
++ struct ssb_bus *bus = dev->bus;
++ int error = 0;
++
++ sdio_claim_host(bus->host_sdio);
++ if (unlikely(ssb_sdio_switch_core(bus, dev)))
++ goto out;
++ offset |= bus->sdio_sbaddr & 0xffff;
++ offset &= SBSDIO_SB_OFT_ADDR_MASK;
++ sdio_writeb(bus->host_sdio, val, offset, &error);
++ if (error) {
++ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %02x, error %d\n",
++ bus->sdio_sbaddr >> 16, offset, val, error);
++ }
++out:
++ sdio_release_host(bus->host_sdio);
++}
++
++static void ssb_sdio_write16(struct ssb_device *dev, u16 offset, u16 val)
++{
++ struct ssb_bus *bus = dev->bus;
++ int error = 0;
++
++ sdio_claim_host(bus->host_sdio);
++ if (unlikely(ssb_sdio_switch_core(bus, dev)))
++ goto out;
++ offset |= bus->sdio_sbaddr & 0xffff;
++ offset &= SBSDIO_SB_OFT_ADDR_MASK;
++ sdio_writew(bus->host_sdio, val, offset, &error);
++ if (error) {
++ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %04x, error %d\n",
++ bus->sdio_sbaddr >> 16, offset, val, error);
++ }
++out:
++ sdio_release_host(bus->host_sdio);
++}
++
++static void ssb_sdio_write32(struct ssb_device *dev, u16 offset, u32 val)
++{
++ struct ssb_bus *bus = dev->bus;
++ int error = 0;
++
++ sdio_claim_host(bus->host_sdio);
++ if (unlikely(ssb_sdio_switch_core(bus, dev)))
++ goto out;
++ offset |= bus->sdio_sbaddr & 0xffff;
++ offset &= SBSDIO_SB_OFT_ADDR_MASK;
++ offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
++ sdio_writel(bus->host_sdio, val, offset, &error);
++ if (error) {
++ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %08x, error %d\n",
++ bus->sdio_sbaddr >> 16, offset, val, error);
++ }
++ if (bus->quirks & SSB_QUIRK_SDIO_READ_AFTER_WRITE32)
++ sdio_readl(bus->host_sdio, 0, &error);
++out:
++ sdio_release_host(bus->host_sdio);
++}
++
++#ifdef CONFIG_SSB_BLOCKIO
++static void ssb_sdio_block_write(struct ssb_device *dev, const void *buffer,
++ size_t count, u16 offset, u8 reg_width)
++{
++ size_t saved_count = count;
++ struct ssb_bus *bus = dev->bus;
++ int error = 0;
++
++ sdio_claim_host(bus->host_sdio);
++ if (unlikely(ssb_sdio_switch_core(bus, dev))) {
++ error = -EIO;
++ memset((void *)buffer, 0xff, count);
++ goto err_out;
++ }
++ offset |= bus->sdio_sbaddr & 0xffff;
++ offset &= SBSDIO_SB_OFT_ADDR_MASK;
++
++ switch (reg_width) {
++ case sizeof(u8):
++ error = sdio_writesb(bus->host_sdio, offset,
++ (void *)buffer, count);
++ break;
++ case sizeof(u16):
++ SSB_WARN_ON(count & 1);
++ error = sdio_writesb(bus->host_sdio, offset,
++ (void *)buffer, count);
++ break;
++ case sizeof(u32):
++ SSB_WARN_ON(count & 3);
++ offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
++ error = sdio_writesb(bus->host_sdio, offset,
++ (void *)buffer, count);
++ break;
++ default:
++ SSB_WARN_ON(1);
++ }
++ if (!error)
++ goto out;
++
++err_out:
++ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%zu), error %d\n",
++ bus->sdio_sbaddr >> 16, offset, reg_width, saved_count, error);
++out:
++ sdio_release_host(bus->host_sdio);
++}
++
++#endif /* CONFIG_SSB_BLOCKIO */
++
++/* Not "static", as it's used in main.c */
++const struct ssb_bus_ops ssb_sdio_ops = {
++ .read8 = ssb_sdio_read8,
++ .read16 = ssb_sdio_read16,
++ .read32 = ssb_sdio_read32,
++ .write8 = ssb_sdio_write8,
++ .write16 = ssb_sdio_write16,
++ .write32 = ssb_sdio_write32,
++#ifdef CONFIG_SSB_BLOCKIO
++ .block_read = ssb_sdio_block_read,
++ .block_write = ssb_sdio_block_write,
++#endif
++};
++
++#define GOTO_ERROR_ON(condition, description) do { \
++ if (unlikely(condition)) { \
++ error_description = description; \
++ goto error; \
++ } \
++ } while (0)
++
++int ssb_sdio_get_invariants(struct ssb_bus *bus,
++ struct ssb_init_invariants *iv)
++{
++ struct ssb_sprom *sprom = &iv->sprom;
++ struct ssb_boardinfo *bi = &iv->boardinfo;
++ const char *error_description = "none";
++ struct sdio_func_tuple *tuple;
++ void *mac;
++
++ memset(sprom, 0xFF, sizeof(*sprom));
++ sprom->boardflags_lo = 0;
++ sprom->boardflags_hi = 0;
++
++ tuple = bus->host_sdio->tuples;
++ while (tuple) {
++ switch (tuple->code) {
++ case 0x22: /* extended function */
++ switch (tuple->data[0]) {
++ case CISTPL_FUNCE_LAN_NODE_ID:
++ GOTO_ERROR_ON((tuple->size != 7) &&
++ (tuple->data[1] != 6),
++ "mac tpl size");
++ /* fetch the MAC address. */
++ mac = tuple->data + 2;
++ memcpy(sprom->il0mac, mac, ETH_ALEN);
++ memcpy(sprom->et1mac, mac, ETH_ALEN);
++ break;
++ default:
++ break;
++ }
++ break;
++ case 0x80: /* vendor specific tuple */
++ switch (tuple->data[0]) {
++ case SSB_SDIO_CIS_SROMREV:
++ GOTO_ERROR_ON(tuple->size != 2,
++ "sromrev tpl size");
++ sprom->revision = tuple->data[1];
++ break;
++ case SSB_SDIO_CIS_ID:
++ GOTO_ERROR_ON((tuple->size != 5) &&
++ (tuple->size != 7),
++ "id tpl size");
++ bi->vendor = tuple->data[1] |
++ (tuple->data[2]<<8);
++ break;
++ case SSB_SDIO_CIS_BOARDREV:
++ GOTO_ERROR_ON(tuple->size != 2,
++ "boardrev tpl size");
++ sprom->board_rev = tuple->data[1];
++ break;
++ case SSB_SDIO_CIS_PA:
++ GOTO_ERROR_ON((tuple->size != 9) &&
++ (tuple->size != 10),
++ "pa tpl size");
++ sprom->pa0b0 = tuple->data[1] |
++ ((u16)tuple->data[2] << 8);
++ sprom->pa0b1 = tuple->data[3] |
++ ((u16)tuple->data[4] << 8);
++ sprom->pa0b2 = tuple->data[5] |
++ ((u16)tuple->data[6] << 8);
++ sprom->itssi_a = tuple->data[7];
++ sprom->itssi_bg = tuple->data[7];
++ sprom->maxpwr_a = tuple->data[8];
++ sprom->maxpwr_bg = tuple->data[8];
++ break;
++ case SSB_SDIO_CIS_OEMNAME:
++ /* Not present */
++ break;
++ case SSB_SDIO_CIS_CCODE:
++ GOTO_ERROR_ON(tuple->size != 2,
++ "ccode tpl size");
++ sprom->country_code = tuple->data[1];
++ break;
++ case SSB_SDIO_CIS_ANTENNA:
++ GOTO_ERROR_ON(tuple->size != 2,
++ "ant tpl size");
++ sprom->ant_available_a = tuple->data[1];
++ sprom->ant_available_bg = tuple->data[1];
++ break;
++ case SSB_SDIO_CIS_ANTGAIN:
++ GOTO_ERROR_ON(tuple->size != 2,
++ "antg tpl size");
++ sprom->antenna_gain.ghz24.a0 = tuple->data[1];
++ sprom->antenna_gain.ghz24.a1 = tuple->data[1];
++ sprom->antenna_gain.ghz24.a2 = tuple->data[1];
++ sprom->antenna_gain.ghz24.a3 = tuple->data[1];
++ sprom->antenna_gain.ghz5.a0 = tuple->data[1];
++ sprom->antenna_gain.ghz5.a1 = tuple->data[1];
++ sprom->antenna_gain.ghz5.a2 = tuple->data[1];
++ sprom->antenna_gain.ghz5.a3 = tuple->data[1];
++ break;
++ case SSB_SDIO_CIS_BFLAGS:
++ GOTO_ERROR_ON((tuple->size != 3) &&
++ (tuple->size != 5),
++ "bfl tpl size");
++ sprom->boardflags_lo = tuple->data[1] |
++ ((u16)tuple->data[2] << 8);
++ break;
++ case SSB_SDIO_CIS_LEDS:
++ GOTO_ERROR_ON(tuple->size != 5,
++ "leds tpl size");
++ sprom->gpio0 = tuple->data[1];
++ sprom->gpio1 = tuple->data[2];
++ sprom->gpio2 = tuple->data[3];
++ sprom->gpio3 = tuple->data[4];
++ break;
++ default:
++ break;
++ }
++ break;
++ default:
++ break;
++ }
++ tuple = tuple->next;
++ }
++
++ return 0;
++error:
++ dev_err(ssb_sdio_dev(bus), "failed to fetch device invariants: %s\n",
++ error_description);
++ return -ENODEV;
++}
++
++void ssb_sdio_exit(struct ssb_bus *bus)
++{
++ if (bus->bustype != SSB_BUSTYPE_SDIO)
++ return;
++ /* Nothing to do here. */
++}
++
++int ssb_sdio_init(struct ssb_bus *bus)
++{
++ if (bus->bustype != SSB_BUSTYPE_SDIO)
++ return 0;
++
++ bus->sdio_sbaddr = ~0;
++
++ return 0;
++}
+--- a/drivers/ssb/sprom.c
++++ b/drivers/ssb/sprom.c
+@@ -2,7 +2,7 @@
+ * Sonics Silicon Backplane
+ * Common SPROM support routines
+ *
+- * Copyright (C) 2005-2008 Michael Buesch <mb@bu3sch.de>
++ * Copyright (C) 2005-2008 Michael Buesch <m@bues.ch>
+ * Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
+ * Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
+ * Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
+@@ -13,8 +13,11 @@
+
+ #include "ssb_private.h"
+
++#include <linux/ctype.h>
++#include <linux/slab.h>
+
+-static const struct ssb_sprom *fallback_sprom;
++
++static int(*get_fallback_sprom)(struct ssb_bus *dev, struct ssb_sprom *out);
+
+
+ static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len,
+@@ -33,17 +36,27 @@ static int sprom2hex(const u16 *sprom, c
+ static int hex2sprom(u16 *sprom, const char *dump, size_t len,
+ size_t sprom_size_words)
+ {
+- char tmp[5] = { 0 };
+- int cnt = 0;
++ char c, tmp[5] = { 0 };
++ int err, cnt = 0;
+ unsigned long parsed;
+
+- if (len < sprom_size_words * 2)
++ /* Strip whitespace at the end. */
++ while (len) {
++ c = dump[len - 1];
++ if (!isspace(c) && c != '\0')
++ break;
++ len--;
++ }
++ /* Length must match exactly. */
++ if (len != sprom_size_words * 4)
+ return -EINVAL;
+
+ while (cnt < sprom_size_words) {
+ memcpy(tmp, dump, 4);
+ dump += 4;
+- parsed = simple_strtoul(tmp, NULL, 16);
++ err = strict_strtoul(tmp, 16, &parsed);
++ if (err)
++ return err;
+ sprom[cnt++] = swab16((u16)parsed);
+ }
+
+@@ -90,6 +103,7 @@ ssize_t ssb_attr_sprom_store(struct ssb_
+ u16 *sprom;
+ int res = 0, err = -ENOMEM;
+ size_t sprom_size_words = bus->sprom_size;
++ struct ssb_freeze_context freeze;
+
+ sprom = kcalloc(bus->sprom_size, sizeof(u16), GFP_KERNEL);
+ if (!sprom)
+@@ -111,18 +125,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_
+ err = -ERESTARTSYS;
+ if (mutex_lock_interruptible(&bus->sprom_mutex))
+ goto out_kfree;
+- err = ssb_devices_freeze(bus);
+- if (err == -EOPNOTSUPP) {
+- ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze devices. "
+- "No suspend support. Is CONFIG_PM enabled?\n");
+- goto out_unlock;
+- }
++ err = ssb_devices_freeze(bus, &freeze);
+ if (err) {
+ ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n");
+ goto out_unlock;
+ }
+ res = sprom_write(bus, sprom);
+- err = ssb_devices_thaw(bus);
++ err = ssb_devices_thaw(&freeze);
+ if (err)
+ ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n");
+ out_unlock:
+@@ -136,34 +145,56 @@ out:
+ }
+
+ /**
+- * ssb_arch_set_fallback_sprom - Set a fallback SPROM for use if no SPROM is found.
+- *
+- * @sprom: The SPROM data structure to register.
+- *
+- * With this function the architecture implementation may register a fallback
+- * SPROM data structure. The fallback is only used for PCI based SSB devices,
+- * where no valid SPROM can be found in the shadow registers.
++ * ssb_arch_register_fallback_sprom - Registers a method providing a
++ * fallback SPROM if no SPROM is found.
+ *
+- * This function is useful for weird architectures that have a half-assed SSB device
+- * hardwired to their PCI bus.
++ * @sprom_callback: The callback function.
+ *
+- * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently
+- * don't use this fallback.
+- * Architectures must provide the SPROM for native SSB devices anyway,
+- * so the fallback also isn't used for native devices.
++ * With this function the architecture implementation may register a
++ * callback handler which fills the SPROM data structure. The fallback is
++ * only used for PCI based SSB devices, where no valid SPROM can be found
++ * in the shadow registers.
++ *
++ * This function is useful for weird architectures that have a half-assed
++ * SSB device hardwired to their PCI bus.
++ *
++ * Note that it does only work with PCI attached SSB devices. PCMCIA
++ * devices currently don't use this fallback.
++ * Architectures must provide the SPROM for native SSB devices anyway, so
++ * the fallback also isn't used for native devices.
+ *
+- * This function is available for architecture code, only. So it is not exported.
++ * This function is available for architecture code, only. So it is not
++ * exported.
+ */
+-int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom)
++int ssb_arch_register_fallback_sprom(int (*sprom_callback)(struct ssb_bus *bus,
++ struct ssb_sprom *out))
+ {
+- if (fallback_sprom)
++ if (get_fallback_sprom)
+ return -EEXIST;
+- fallback_sprom = sprom;
++ get_fallback_sprom = sprom_callback;
+
+ return 0;
+ }
+
+-const struct ssb_sprom *ssb_get_fallback_sprom(void)
++int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, struct ssb_sprom *out)
+ {
+- return fallback_sprom;
++ if (!get_fallback_sprom)
++ return -ENOENT;
++
++ return get_fallback_sprom(bus, out);
++}
++
++/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
++bool ssb_is_sprom_available(struct ssb_bus *bus)
++{
++ /* status register only exists on chipcomon rev >= 11 and we need check
++ for >= 31 only */
++ /* this routine differs from specs as we do not access SPROM directly
++ on PCMCIA */
++ if (bus->bustype == SSB_BUSTYPE_PCI &&
++ bus->chipco.dev && /* can be unavailable! */
++ bus->chipco.dev->id.revision >= 31)
++ return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM;
++
++ return true;
+ }
+--- a/drivers/ssb/ssb_private.h
++++ b/drivers/ssb/ssb_private.h
+@@ -114,6 +114,46 @@ static inline int ssb_pcmcia_init(struct
+ }
+ #endif /* CONFIG_SSB_PCMCIAHOST */
+
++/* sdio.c */
++#ifdef CONFIG_SSB_SDIOHOST
++extern int ssb_sdio_get_invariants(struct ssb_bus *bus,
++ struct ssb_init_invariants *iv);
++
++extern u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset);
++extern int ssb_sdio_switch_core(struct ssb_bus *bus, struct ssb_device *dev);
++extern int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx);
++extern int ssb_sdio_hardware_setup(struct ssb_bus *bus);
++extern void ssb_sdio_exit(struct ssb_bus *bus);
++extern int ssb_sdio_init(struct ssb_bus *bus);
++
++extern const struct ssb_bus_ops ssb_sdio_ops;
++#else /* CONFIG_SSB_SDIOHOST */
++static inline u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset)
++{
++ return 0;
++}
++static inline int ssb_sdio_switch_core(struct ssb_bus *bus,
++ struct ssb_device *dev)
++{
++ return 0;
++}
++static inline int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx)
++{
++ return 0;
++}
++static inline int ssb_sdio_hardware_setup(struct ssb_bus *bus)
++{
++ return 0;
++}
++static inline void ssb_sdio_exit(struct ssb_bus *bus)
++{
++}
++static inline int ssb_sdio_init(struct ssb_bus *bus)
++{
++ return 0;
++}
++#endif /* CONFIG_SSB_SDIOHOST */
++
+
+ /* scan.c */
+ extern const char *ssb_core_name(u16 coreid);
+@@ -131,24 +171,33 @@ ssize_t ssb_attr_sprom_store(struct ssb_
+ const char *buf, size_t count,
+ int (*sprom_check_crc)(const u16 *sprom, size_t size),
+ int (*sprom_write)(struct ssb_bus *bus, const u16 *sprom));
+-extern const struct ssb_sprom *ssb_get_fallback_sprom(void);
++extern int ssb_fill_sprom_with_fallback(struct ssb_bus *bus,
++ struct ssb_sprom *out);
+
+
+ /* core.c */
+ extern u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m);
+-extern int ssb_devices_freeze(struct ssb_bus *bus);
+-extern int ssb_devices_thaw(struct ssb_bus *bus);
+ extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev);
+ int ssb_for_each_bus_call(unsigned long data,
+ int (*func)(struct ssb_bus *bus, unsigned long data));
+ extern struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev);
+
++struct ssb_freeze_context {
++ /* Pointer to the bus */
++ struct ssb_bus *bus;
++ /* Boolean list to indicate whether a device is frozen on this bus. */
++ bool device_frozen[SSB_MAX_NR_CORES];
++};
++extern int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx);
++extern int ssb_devices_thaw(struct ssb_freeze_context *ctx);
++
++
+
+ /* b43_pci_bridge.c */
+ #ifdef CONFIG_SSB_B43_PCI_BRIDGE
+ extern int __init b43_pci_ssb_bridge_init(void);
+ extern void __exit b43_pci_ssb_bridge_exit(void);
+-#else /* CONFIG_SSB_B43_PCI_BRIDGR */
++#else /* CONFIG_SSB_B43_PCI_BRIDGE */
+ static inline int b43_pci_ssb_bridge_init(void)
+ {
+ return 0;
+@@ -156,6 +205,6 @@ static inline int b43_pci_ssb_bridge_ini
+ static inline void b43_pci_ssb_bridge_exit(void)
+ {
+ }
+-#endif /* CONFIG_SSB_PCIHOST */
++#endif /* CONFIG_SSB_B43_PCI_BRIDGE */
+
+ #endif /* LINUX_SSB_PRIVATE_H_ */
+--- a/include/linux/pci_ids.h
++++ b/include/linux/pci_ids.h
+@@ -2034,6 +2034,7 @@
+ #define PCI_DEVICE_ID_AFAVLAB_P030 0x2182
+ #define PCI_SUBDEVICE_ID_AFAVLAB_P061 0x2150
+
++#define PCI_VENDOR_ID_BCM_GVC 0x14a4
+ #define PCI_VENDOR_ID_BROADCOM 0x14e4
+ #define PCI_DEVICE_ID_TIGON3_5752 0x1600
+ #define PCI_DEVICE_ID_TIGON3_5752M 0x1601
+--- a/include/linux/ssb/ssb.h
++++ b/include/linux/ssb/ssb.h
+@@ -16,6 +16,12 @@ struct pcmcia_device;
+ struct ssb_bus;
+ struct ssb_driver;
+
++struct ssb_sprom_core_pwr_info {
++ u8 itssi_2g, itssi_5g;
++ u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh;
++ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3];
++};
++
+ struct ssb_sprom {
+ u8 revision;
+ u8 il0mac[6]; /* MAC address for 802.11b/g */
+@@ -25,26 +31,64 @@ struct ssb_sprom {
+ u8 et1phyaddr; /* MII address for enet1 */
+ u8 et0mdcport; /* MDIO for enet0 */
+ u8 et1mdcport; /* MDIO for enet1 */
+- u8 board_rev; /* Board revision number from SPROM. */
++ u16 board_rev; /* Board revision number from SPROM. */
+ u8 country_code; /* Country Code */
+- u8 ant_available_a; /* A-PHY antenna available bits (up to 4) */
+- u8 ant_available_bg; /* B/G-PHY antenna available bits (up to 4) */
++ u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */
++ u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */
++ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */
++ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */
+ u16 pa0b0;
+ u16 pa0b1;
+ u16 pa0b2;
+ u16 pa1b0;
+ u16 pa1b1;
+ u16 pa1b2;
++ u16 pa1lob0;
++ u16 pa1lob1;
++ u16 pa1lob2;
++ u16 pa1hib0;
++ u16 pa1hib1;
++ u16 pa1hib2;
+ u8 gpio0; /* GPIO pin 0 */
+ u8 gpio1; /* GPIO pin 1 */
+ u8 gpio2; /* GPIO pin 2 */
+ u8 gpio3; /* GPIO pin 3 */
+- u16 maxpwr_a; /* A-PHY Amplifier Max Power (in dBm Q5.2) */
+- u16 maxpwr_bg; /* B/G-PHY Amplifier Max Power (in dBm Q5.2) */
++ u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */
++ u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */
++ u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */
++ u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */
+ u8 itssi_a; /* Idle TSSI Target for A-PHY */
+ u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */
+- u16 boardflags_lo; /* Boardflags (low 16 bits) */
+- u16 boardflags_hi; /* Boardflags (high 16 bits) */
++ u8 tri2g; /* 2.4GHz TX isolation */
++ u8 tri5gl; /* 5.2GHz TX isolation */
++ u8 tri5g; /* 5.3GHz TX isolation */
++ u8 tri5gh; /* 5.8GHz TX isolation */
++ u8 txpid2g[4]; /* 2GHz TX power index */
++ u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */
++ u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */
++ u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */
++ u8 rxpo2g; /* 2GHz RX power offset */
++ u8 rxpo5g; /* 5GHz RX power offset */
++ u8 rssisav2g; /* 2GHz RSSI params */
++ u8 rssismc2g;
++ u8 rssismf2g;
++ u8 bxa2g; /* 2GHz BX arch */
++ u8 rssisav5g; /* 5GHz RSSI params */
++ u8 rssismc5g;
++ u8 rssismf5g;
++ u8 bxa5g; /* 5GHz BX arch */
++ u16 cck2gpo; /* CCK power offset */
++ u32 ofdm2gpo; /* 2.4GHz OFDM power offset */
++ u32 ofdm5glpo; /* 5.2GHz OFDM power offset */
++ u32 ofdm5gpo; /* 5.3GHz OFDM power offset */
++ u32 ofdm5ghpo; /* 5.8GHz OFDM power offset */
++ u16 boardflags_lo; /* Board flags (bits 0-15) */
++ u16 boardflags_hi; /* Board flags (bits 16-31) */
++ u16 boardflags2_lo; /* Board flags (bits 32-47) */
++ u16 boardflags2_hi; /* Board flags (bits 48-63) */
++ /* TODO store board flags in a single u64 */
++
++ struct ssb_sprom_core_pwr_info core_pwr_info[4];
+
+ /* Antenna gain values for up to 4 antennas
+ * on each band. Values in dBm/4 (Q5.2). Negative gain means the
+@@ -58,14 +102,23 @@ struct ssb_sprom {
+ } ghz5; /* 5GHz band */
+ } antenna_gain;
+
+- /* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */
++ struct {
++ struct {
++ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut;
++ } ghz2;
++ struct {
++ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut;
++ } ghz5;
++ } fem;
++
++ /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
+ };
+
+ /* Information about the PCB the circuitry is soldered on. */
+ struct ssb_boardinfo {
+ u16 vendor;
+ u16 type;
+- u16 rev;
++ u8 rev;
+ };
+
+
+@@ -137,7 +190,7 @@ struct ssb_device {
+ * is an optimization. */
+ const struct ssb_bus_ops *ops;
+
+- struct device *dev;
++ struct device *dev, *dma_dev;
+
+ struct ssb_bus *bus;
+ struct ssb_device_id id;
+@@ -195,10 +248,9 @@ struct ssb_driver {
+ #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv)
+
+ extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner);
+-static inline int ssb_driver_register(struct ssb_driver *drv)
+-{
+- return __ssb_driver_register(drv, THIS_MODULE);
+-}
++#define ssb_driver_register(drv) \
++ __ssb_driver_register(drv, THIS_MODULE)
++
+ extern void ssb_driver_unregister(struct ssb_driver *drv);
+
+
+@@ -208,6 +260,7 @@ enum ssb_bustype {
+ SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */
+ SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */
+ SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */
++ SSB_BUSTYPE_SDIO, /* SSB is connected to SDIO bus */
+ };
+
+ /* board_vendor */
+@@ -238,20 +291,33 @@ struct ssb_bus {
+
+ const struct ssb_bus_ops *ops;
+
+- /* The core in the basic address register window. (PCI bus only) */
++ /* The core currently mapped into the MMIO window.
++ * Not valid on all host-buses. So don't use outside of SSB. */
+ struct ssb_device *mapped_device;
+- /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
+- u8 mapped_pcmcia_seg;
++ union {
++ /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
++ u8 mapped_pcmcia_seg;
++ /* Current SSB base address window for SDIO. */
++ u32 sdio_sbaddr;
++ };
+ /* Lock for core and segment switching.
+ * On PCMCIA-host busses this is used to protect the whole MMIO access. */
+ spinlock_t bar_lock;
+
+- /* The bus this backplane is running on. */
++ /* The host-bus this backplane is running on. */
+ enum ssb_bustype bustype;
+- /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */
+- struct pci_dev *host_pci;
+- /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
+- struct pcmcia_device *host_pcmcia;
++ /* Pointers to the host-bus. Check bustype before using any of these pointers. */
++ union {
++ /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */
++ struct pci_dev *host_pci;
++ /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
++ struct pcmcia_device *host_pcmcia;
++ /* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */
++ struct sdio_func *host_sdio;
++ };
++
++ /* See enum ssb_quirks */
++ unsigned int quirks;
+
+ #ifdef CONFIG_SSB_SPROM
+ /* Mutex to protect the SPROM writing. */
+@@ -260,7 +326,8 @@ struct ssb_bus {
+
+ /* ID information about the Chip. */
+ u16 chip_id;
+- u16 chip_rev;
++ u8 chip_rev;
++ u16 sprom_offset;
+ u16 sprom_size; /* number of words in sprom */
+ u8 chip_package;
+
+@@ -306,6 +373,11 @@ struct ssb_bus {
+ #endif /* DEBUG */
+ };
+
++enum ssb_quirks {
++ /* SDIO connected card requires performing a read after writing a 32-bit value */
++ SSB_QUIRK_SDIO_READ_AFTER_WRITE32 = (1 << 0),
++};
++
+ /* The initialization-invariants. */
+ struct ssb_init_invariants {
+ /* Versioning information about the PCB. */
+@@ -336,12 +408,23 @@ extern int ssb_bus_pcmciabus_register(st
+ struct pcmcia_device *pcmcia_dev,
+ unsigned long baseaddr);
+ #endif /* CONFIG_SSB_PCMCIAHOST */
++#ifdef CONFIG_SSB_SDIOHOST
++extern int ssb_bus_sdiobus_register(struct ssb_bus *bus,
++ struct sdio_func *sdio_func,
++ unsigned int quirks);
++#endif /* CONFIG_SSB_SDIOHOST */
++
+
+ extern void ssb_bus_unregister(struct ssb_bus *bus);
+
++/* Does the device have an SPROM? */
++extern bool ssb_is_sprom_available(struct ssb_bus *bus);
++
+ /* Set a fallback SPROM.
+ * See kdoc at the function definition for complete documentation. */
+-extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
++extern int ssb_arch_register_fallback_sprom(
++ int (*sprom_callback)(struct ssb_bus *bus,
++ struct ssb_sprom *out));
+
+ /* Suspend a SSB bus.
+ * Call this from the parent bus suspend routine. */
+@@ -612,6 +695,7 @@ extern int ssb_bus_may_powerdown(struct
+ * Otherwise static always-on powercontrol will be used. */
+ extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
+
++extern void ssb_commit_settings(struct ssb_bus *bus);
+
+ /* Various helper functions */
+ extern u32 ssb_admatch_base(u32 adm);
+--- a/include/linux/ssb/ssb_driver_chipcommon.h
++++ b/include/linux/ssb/ssb_driver_chipcommon.h
+@@ -8,7 +8,7 @@
+ * gpio interface, extbus, and support for serial and parallel flashes.
+ *
+ * Copyright 2005, Broadcom Corporation
+- * Copyright 2006, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2006, Michael Buesch <m@bues.ch>
+ *
+ * Licensed under the GPL version 2. See COPYING for details.
+ */
+@@ -53,6 +53,7 @@
+ #define SSB_CHIPCO_CAP_64BIT 0x08000000 /* 64-bit Backplane */
+ #define SSB_CHIPCO_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */
+ #define SSB_CHIPCO_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */
++#define SSB_CHIPCO_CAP_SPROM 0x40000000 /* SPROM present */
+ #define SSB_CHIPCO_CORECTL 0x0008
+ #define SSB_CHIPCO_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */
+ #define SSB_CHIPCO_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
+@@ -122,6 +123,8 @@
+ #define SSB_CHIPCO_FLASHDATA 0x0048
+ #define SSB_CHIPCO_BCAST_ADDR 0x0050
+ #define SSB_CHIPCO_BCAST_DATA 0x0054
++#define SSB_CHIPCO_GPIOPULLUP 0x0058 /* Rev >= 20 only */
++#define SSB_CHIPCO_GPIOPULLDOWN 0x005C /* Rev >= 20 only */
+ #define SSB_CHIPCO_GPIOIN 0x0060
+ #define SSB_CHIPCO_GPIOOUT 0x0064
+ #define SSB_CHIPCO_GPIOOUTEN 0x0068
+@@ -130,6 +133,9 @@
+ #define SSB_CHIPCO_GPIOIRQ 0x0074
+ #define SSB_CHIPCO_WATCHDOG 0x0080
+ #define SSB_CHIPCO_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */
++#define SSB_CHIPCO_GPIOTIMER_OFFTIME 0x0000FFFF
++#define SSB_CHIPCO_GPIOTIMER_OFFTIME_SHIFT 0
++#define SSB_CHIPCO_GPIOTIMER_ONTIME 0xFFFF0000
+ #define SSB_CHIPCO_GPIOTIMER_ONTIME_SHIFT 16
+ #define SSB_CHIPCO_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */
+ #define SSB_CHIPCO_CLOCK_N 0x0090
+@@ -188,8 +194,10 @@
+ #define SSB_CHIPCO_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */
+ #define SSB_CHIPCO_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */
+ #define SSB_CHIPCO_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */
+-#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00010000 /* HT available */
+-#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00020000 /* APL available */
++#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00010000 /* ALP available */
++#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00020000 /* HT available */
++#define SSB_CHIPCO_CLKCTLST_4328A0_HAVEHT 0x00010000 /* 4328a0 has reversed bits */
++#define SSB_CHIPCO_CLKCTLST_4328A0_HAVEALP 0x00020000 /* 4328a0 has reversed bits */
+ #define SSB_CHIPCO_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */
+ #define SSB_CHIPCO_UART0_DATA 0x0300
+ #define SSB_CHIPCO_UART0_IMR 0x0304
+@@ -385,6 +393,7 @@
+
+
+ /** Chip specific Chip-Status register contents. */
++#define SSB_CHIPCO_CHST_4322_SPROM_EXISTS 0x00000040 /* SPROM present */
+ #define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL 0x00000003
+ #define SSB_CHIPCO_CHST_4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */
+ #define SSB_CHIPCO_CHST_4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */
+@@ -398,6 +407,18 @@
+ #define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT 4
+ #define SSB_CHIPCO_CHST_4325_PMUTOP_2B 0x00000200 /* 1 for 2b, 0 for to 2a */
+
++/** Macros to determine SPROM presence based on Chip-Status register. */
++#define SSB_CHIPCO_CHST_4312_SPROM_PRESENT(status) \
++ ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
++ SSB_CHIPCO_CHST_4325_OTP_SEL)
++#define SSB_CHIPCO_CHST_4322_SPROM_PRESENT(status) \
++ (status & SSB_CHIPCO_CHST_4322_SPROM_EXISTS)
++#define SSB_CHIPCO_CHST_4325_SPROM_PRESENT(status) \
++ (((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
++ SSB_CHIPCO_CHST_4325_DEFCIS_SEL) && \
++ ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
++ SSB_CHIPCO_CHST_4325_OTP_SEL))
++
+
+
+ /** Clockcontrol masks and values **/
+@@ -564,6 +585,7 @@ struct ssb_chipcommon_pmu {
+ struct ssb_chipcommon {
+ struct ssb_device *dev;
+ u32 capabilities;
++ u32 status;
+ /* Fast Powerup Delay constant */
+ u16 fast_pwrup_delay;
+ struct ssb_chipcommon_pmu pmu;
+@@ -629,5 +651,15 @@ extern int ssb_chipco_serial_init(struct
+ /* PMU support */
+ extern void ssb_pmu_init(struct ssb_chipcommon *cc);
+
++enum ssb_pmu_ldo_volt_id {
++ LDO_PAREF = 0,
++ LDO_VOLT1,
++ LDO_VOLT2,
++ LDO_VOLT3,
++};
++
++void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
++ enum ssb_pmu_ldo_volt_id id, u32 voltage);
++void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on);
+
+ #endif /* LINUX_SSB_CHIPCO_H_ */
+--- a/include/linux/ssb/ssb_regs.h
++++ b/include/linux/ssb/ssb_regs.h
+@@ -85,6 +85,8 @@
+ #define SSB_IMSTATE_AP_RSV 0x00000030 /* Reserved */
+ #define SSB_IMSTATE_IBE 0x00020000 /* In Band Error */
+ #define SSB_IMSTATE_TO 0x00040000 /* Timeout */
++#define SSB_IMSTATE_BUSY 0x01800000 /* Busy (Backplane rev >= 2.3 only) */
++#define SSB_IMSTATE_REJECT 0x02000000 /* Reject (Backplane rev >= 2.3 only) */
+ #define SSB_INTVEC 0x0F94 /* SB Interrupt Mask */
+ #define SSB_INTVEC_PCI 0x00000001 /* Enable interrupts for PCI */
+ #define SSB_INTVEC_ENET0 0x00000002 /* Enable interrupts for enet 0 */
+@@ -95,7 +97,7 @@
+ #define SSB_INTVEC_ENET1 0x00000040 /* Enable interrupts for enet 1 */
+ #define SSB_TMSLOW 0x0F98 /* SB Target State Low */
+ #define SSB_TMSLOW_RESET 0x00000001 /* Reset */
+-#define SSB_TMSLOW_REJECT_22 0x00000002 /* Reject (Backplane rev 2.2) */
++#define SSB_TMSLOW_REJECT 0x00000002 /* Reject (Standard Backplane) */
+ #define SSB_TMSLOW_REJECT_23 0x00000004 /* Reject (Backplane rev 2.3) */
+ #define SSB_TMSLOW_CLOCK 0x00010000 /* Clock Enable */
+ #define SSB_TMSLOW_FGC 0x00020000 /* Force Gated Clocks On */
+@@ -162,7 +164,7 @@
+
+ /* SPROM shadow area. If not otherwise noted, fields are
+ * two bytes wide. Note that the SPROM can _only_ be read
+- * in two-byte quantinies.
++ * in two-byte quantities.
+ */
+ #define SSB_SPROMSIZE_WORDS 64
+ #define SSB_SPROMSIZE_BYTES (SSB_SPROMSIZE_WORDS * sizeof(u16))
+@@ -170,26 +172,27 @@
+ #define SSB_SPROMSIZE_WORDS_R4 220
+ #define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
+ #define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
+-#define SSB_SPROM_BASE 0x1000
+-#define SSB_SPROM_REVISION 0x107E
++#define SSB_SPROM_BASE1 0x1000
++#define SSB_SPROM_BASE31 0x0800
++#define SSB_SPROM_REVISION 0x007E
+ #define SSB_SPROM_REVISION_REV 0x00FF /* SPROM Revision number */
+ #define SSB_SPROM_REVISION_CRC 0xFF00 /* SPROM CRC8 value */
+ #define SSB_SPROM_REVISION_CRC_SHIFT 8
+
+ /* SPROM Revision 1 */
+-#define SSB_SPROM1_SPID 0x1004 /* Subsystem Product ID for PCI */
+-#define SSB_SPROM1_SVID 0x1006 /* Subsystem Vendor ID for PCI */
+-#define SSB_SPROM1_PID 0x1008 /* Product ID for PCI */
+-#define SSB_SPROM1_IL0MAC 0x1048 /* 6 bytes MAC address for 802.11b/g */
+-#define SSB_SPROM1_ET0MAC 0x104E /* 6 bytes MAC address for Ethernet */
+-#define SSB_SPROM1_ET1MAC 0x1054 /* 6 bytes MAC address for 802.11a */
+-#define SSB_SPROM1_ETHPHY 0x105A /* Ethernet PHY settings */
++#define SSB_SPROM1_SPID 0x0004 /* Subsystem Product ID for PCI */
++#define SSB_SPROM1_SVID 0x0006 /* Subsystem Vendor ID for PCI */
++#define SSB_SPROM1_PID 0x0008 /* Product ID for PCI */
++#define SSB_SPROM1_IL0MAC 0x0048 /* 6 bytes MAC address for 802.11b/g */
++#define SSB_SPROM1_ET0MAC 0x004E /* 6 bytes MAC address for Ethernet */
++#define SSB_SPROM1_ET1MAC 0x0054 /* 6 bytes MAC address for 802.11a */
++#define SSB_SPROM1_ETHPHY 0x005A /* Ethernet PHY settings */
+ #define SSB_SPROM1_ETHPHY_ET0A 0x001F /* MII Address for enet0 */
+ #define SSB_SPROM1_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */
+ #define SSB_SPROM1_ETHPHY_ET1A_SHIFT 5
+ #define SSB_SPROM1_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
+ #define SSB_SPROM1_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
+-#define SSB_SPROM1_BINF 0x105C /* Board info */
++#define SSB_SPROM1_BINF 0x005C /* Board info */
+ #define SSB_SPROM1_BINF_BREV 0x00FF /* Board Revision */
+ #define SSB_SPROM1_BINF_CCODE 0x0F00 /* Country Code */
+ #define SSB_SPROM1_BINF_CCODE_SHIFT 8
+@@ -197,63 +200,63 @@
+ #define SSB_SPROM1_BINF_ANTBG_SHIFT 12
+ #define SSB_SPROM1_BINF_ANTA 0xC000 /* Available A-PHY antennas */
+ #define SSB_SPROM1_BINF_ANTA_SHIFT 14
+-#define SSB_SPROM1_PA0B0 0x105E
+-#define SSB_SPROM1_PA0B1 0x1060
+-#define SSB_SPROM1_PA0B2 0x1062
+-#define SSB_SPROM1_GPIOA 0x1064 /* General Purpose IO pins 0 and 1 */
++#define SSB_SPROM1_PA0B0 0x005E
++#define SSB_SPROM1_PA0B1 0x0060
++#define SSB_SPROM1_PA0B2 0x0062
++#define SSB_SPROM1_GPIOA 0x0064 /* General Purpose IO pins 0 and 1 */
+ #define SSB_SPROM1_GPIOA_P0 0x00FF /* Pin 0 */
+ #define SSB_SPROM1_GPIOA_P1 0xFF00 /* Pin 1 */
+ #define SSB_SPROM1_GPIOA_P1_SHIFT 8
+-#define SSB_SPROM1_GPIOB 0x1066 /* General Purpuse IO pins 2 and 3 */
++#define SSB_SPROM1_GPIOB 0x0066 /* General Purpuse IO pins 2 and 3 */
+ #define SSB_SPROM1_GPIOB_P2 0x00FF /* Pin 2 */
+ #define SSB_SPROM1_GPIOB_P3 0xFF00 /* Pin 3 */
+ #define SSB_SPROM1_GPIOB_P3_SHIFT 8
+-#define SSB_SPROM1_MAXPWR 0x1068 /* Power Amplifier Max Power */
++#define SSB_SPROM1_MAXPWR 0x0068 /* Power Amplifier Max Power */
+ #define SSB_SPROM1_MAXPWR_BG 0x00FF /* B-PHY and G-PHY (in dBm Q5.2) */
+ #define SSB_SPROM1_MAXPWR_A 0xFF00 /* A-PHY (in dBm Q5.2) */
+ #define SSB_SPROM1_MAXPWR_A_SHIFT 8
+-#define SSB_SPROM1_PA1B0 0x106A
+-#define SSB_SPROM1_PA1B1 0x106C
+-#define SSB_SPROM1_PA1B2 0x106E
+-#define SSB_SPROM1_ITSSI 0x1070 /* Idle TSSI Target */
++#define SSB_SPROM1_PA1B0 0x006A
++#define SSB_SPROM1_PA1B1 0x006C
++#define SSB_SPROM1_PA1B2 0x006E
++#define SSB_SPROM1_ITSSI 0x0070 /* Idle TSSI Target */
+ #define SSB_SPROM1_ITSSI_BG 0x00FF /* B-PHY and G-PHY*/
+ #define SSB_SPROM1_ITSSI_A 0xFF00 /* A-PHY */
+ #define SSB_SPROM1_ITSSI_A_SHIFT 8
+-#define SSB_SPROM1_BFLLO 0x1072 /* Boardflags (low 16 bits) */
+-#define SSB_SPROM1_AGAIN 0x1074 /* Antenna Gain (in dBm Q5.2) */
++#define SSB_SPROM1_BFLLO 0x0072 /* Boardflags (low 16 bits) */
++#define SSB_SPROM1_AGAIN 0x0074 /* Antenna Gain (in dBm Q5.2) */
+ #define SSB_SPROM1_AGAIN_BG 0x00FF /* B-PHY and G-PHY */
+ #define SSB_SPROM1_AGAIN_BG_SHIFT 0
+ #define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */
+ #define SSB_SPROM1_AGAIN_A_SHIFT 8
+
+ /* SPROM Revision 2 (inherits from rev 1) */
+-#define SSB_SPROM2_BFLHI 0x1038 /* Boardflags (high 16 bits) */
+-#define SSB_SPROM2_MAXP_A 0x103A /* A-PHY Max Power */
++#define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */
++#define SSB_SPROM2_MAXP_A 0x003A /* A-PHY Max Power */
+ #define SSB_SPROM2_MAXP_A_HI 0x00FF /* Max Power High */
+ #define SSB_SPROM2_MAXP_A_LO 0xFF00 /* Max Power Low */
+ #define SSB_SPROM2_MAXP_A_LO_SHIFT 8
+-#define SSB_SPROM2_PA1LOB0 0x103C /* A-PHY PowerAmplifier Low Settings */
+-#define SSB_SPROM2_PA1LOB1 0x103E /* A-PHY PowerAmplifier Low Settings */
+-#define SSB_SPROM2_PA1LOB2 0x1040 /* A-PHY PowerAmplifier Low Settings */
+-#define SSB_SPROM2_PA1HIB0 0x1042 /* A-PHY PowerAmplifier High Settings */
+-#define SSB_SPROM2_PA1HIB1 0x1044 /* A-PHY PowerAmplifier High Settings */
+-#define SSB_SPROM2_PA1HIB2 0x1046 /* A-PHY PowerAmplifier High Settings */
+-#define SSB_SPROM2_OPO 0x1078 /* OFDM Power Offset from CCK Level */
++#define SSB_SPROM2_PA1LOB0 0x003C /* A-PHY PowerAmplifier Low Settings */
++#define SSB_SPROM2_PA1LOB1 0x003E /* A-PHY PowerAmplifier Low Settings */
++#define SSB_SPROM2_PA1LOB2 0x0040 /* A-PHY PowerAmplifier Low Settings */
++#define SSB_SPROM2_PA1HIB0 0x0042 /* A-PHY PowerAmplifier High Settings */
++#define SSB_SPROM2_PA1HIB1 0x0044 /* A-PHY PowerAmplifier High Settings */
++#define SSB_SPROM2_PA1HIB2 0x0046 /* A-PHY PowerAmplifier High Settings */
++#define SSB_SPROM2_OPO 0x0078 /* OFDM Power Offset from CCK Level */
+ #define SSB_SPROM2_OPO_VALUE 0x00FF
+ #define SSB_SPROM2_OPO_UNUSED 0xFF00
+-#define SSB_SPROM2_CCODE 0x107C /* Two char Country Code */
++#define SSB_SPROM2_CCODE 0x007C /* Two char Country Code */
+
+ /* SPROM Revision 3 (inherits most data from rev 2) */
+-#define SSB_SPROM3_IL0MAC 0x104A /* 6 bytes MAC address for 802.11b/g */
+-#define SSB_SPROM3_OFDMAPO 0x102C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
+-#define SSB_SPROM3_OFDMALPO 0x1030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
+-#define SSB_SPROM3_OFDMAHPO 0x1034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
+-#define SSB_SPROM3_GPIOLDC 0x1042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
++#define SSB_SPROM3_OFDMAPO 0x002C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
++#define SSB_SPROM3_OFDMALPO 0x0030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
++#define SSB_SPROM3_OFDMAHPO 0x0034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
++#define SSB_SPROM3_GPIOLDC 0x0042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
+ #define SSB_SPROM3_GPIOLDC_OFF 0x0000FF00 /* Off Count */
+ #define SSB_SPROM3_GPIOLDC_OFF_SHIFT 8
+ #define SSB_SPROM3_GPIOLDC_ON 0x00FF0000 /* On Count */
+ #define SSB_SPROM3_GPIOLDC_ON_SHIFT 16
+-#define SSB_SPROM3_CCKPO 0x1078 /* CCK Power Offset */
++#define SSB_SPROM3_IL0MAC 0x004A /* 6 bytes MAC address for 802.11b/g */
++#define SSB_SPROM3_CCKPO 0x0078 /* CCK Power Offset */
+ #define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */
+ #define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */
+ #define SSB_SPROM3_CCKPO_2M_SHIFT 4
+@@ -264,104 +267,291 @@
+ #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
+
+ /* SPROM Revision 4 */
+-#define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for a/b/g/n */
+-#define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings ?? */
++#define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */
++#define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */
++#define SSB_SPROM4_BFL2LO 0x0048 /* Board flags 2 (low 16 bits) */
++#define SSB_SPROM4_BFL2HI 0x004A /* Board flags 2 Hi */
++#define SSB_SPROM4_IL0MAC 0x004C /* 6 byte MAC address for a/b/g/n */
++#define SSB_SPROM4_CCODE 0x0052 /* Country Code (2 bytes) */
++#define SSB_SPROM4_GPIOA 0x0056 /* Gen. Purpose IO # 0 and 1 */
++#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */
++#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */
++#define SSB_SPROM4_GPIOA_P1_SHIFT 8
++#define SSB_SPROM4_GPIOB 0x0058 /* Gen. Purpose IO # 2 and 3 */
++#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */
++#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */
++#define SSB_SPROM4_GPIOB_P3_SHIFT 8
++#define SSB_SPROM4_ETHPHY 0x005A /* Ethernet PHY settings ?? */
+ #define SSB_SPROM4_ETHPHY_ET0A 0x001F /* MII Address for enet0 */
+ #define SSB_SPROM4_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */
+ #define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5
+ #define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
+ #define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
+-#define SSB_SPROM4_CCODE 0x1052 /* Country Code (2 bytes) */
+-#define SSB_SPROM4_ANTAVAIL 0x105D /* Antenna available bitfields */
+-#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */
+-#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0
+-#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */
+-#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8
+-#define SSB_SPROM4_BFLLO 0x1044 /* Boardflags (low 16 bits) */
+-#define SSB_SPROM4_AGAIN01 0x105E /* Antenna Gain (in dBm Q5.2) */
++#define SSB_SPROM4_ANTAVAIL 0x005D /* Antenna available bitfields */
++#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */
++#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0
++#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */
++#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8
++#define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */
+ #define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */
+ #define SSB_SPROM4_AGAIN0_SHIFT 0
+ #define SSB_SPROM4_AGAIN1 0xFF00 /* Antenna 1 */
+ #define SSB_SPROM4_AGAIN1_SHIFT 8
+-#define SSB_SPROM4_AGAIN23 0x1060
++#define SSB_SPROM4_AGAIN23 0x0060
+ #define SSB_SPROM4_AGAIN2 0x00FF /* Antenna 2 */
+ #define SSB_SPROM4_AGAIN2_SHIFT 0
+ #define SSB_SPROM4_AGAIN3 0xFF00 /* Antenna 3 */
+ #define SSB_SPROM4_AGAIN3_SHIFT 8
+-#define SSB_SPROM4_BFLHI 0x1046 /* Board Flags Hi */
+-#define SSB_SPROM4_MAXP_BG 0x1080 /* Max Power BG in path 1 */
++#define SSB_SPROM4_TXPID2G01 0x0062 /* TX Power Index 2GHz */
++#define SSB_SPROM4_TXPID2G0 0x00FF
++#define SSB_SPROM4_TXPID2G0_SHIFT 0
++#define SSB_SPROM4_TXPID2G1 0xFF00
++#define SSB_SPROM4_TXPID2G1_SHIFT 8
++#define SSB_SPROM4_TXPID2G23 0x0064 /* TX Power Index 2GHz */
++#define SSB_SPROM4_TXPID2G2 0x00FF
++#define SSB_SPROM4_TXPID2G2_SHIFT 0
++#define SSB_SPROM4_TXPID2G3 0xFF00
++#define SSB_SPROM4_TXPID2G3_SHIFT 8
++#define SSB_SPROM4_TXPID5G01 0x0066 /* TX Power Index 5GHz middle subband */
++#define SSB_SPROM4_TXPID5G0 0x00FF
++#define SSB_SPROM4_TXPID5G0_SHIFT 0
++#define SSB_SPROM4_TXPID5G1 0xFF00
++#define SSB_SPROM4_TXPID5G1_SHIFT 8
++#define SSB_SPROM4_TXPID5G23 0x0068 /* TX Power Index 5GHz middle subband */
++#define SSB_SPROM4_TXPID5G2 0x00FF
++#define SSB_SPROM4_TXPID5G2_SHIFT 0
++#define SSB_SPROM4_TXPID5G3 0xFF00
++#define SSB_SPROM4_TXPID5G3_SHIFT 8
++#define SSB_SPROM4_TXPID5GL01 0x006A /* TX Power Index 5GHz low subband */
++#define SSB_SPROM4_TXPID5GL0 0x00FF
++#define SSB_SPROM4_TXPID5GL0_SHIFT 0
++#define SSB_SPROM4_TXPID5GL1 0xFF00
++#define SSB_SPROM4_TXPID5GL1_SHIFT 8
++#define SSB_SPROM4_TXPID5GL23 0x006C /* TX Power Index 5GHz low subband */
++#define SSB_SPROM4_TXPID5GL2 0x00FF
++#define SSB_SPROM4_TXPID5GL2_SHIFT 0
++#define SSB_SPROM4_TXPID5GL3 0xFF00
++#define SSB_SPROM4_TXPID5GL3_SHIFT 8
++#define SSB_SPROM4_TXPID5GH01 0x006E /* TX Power Index 5GHz high subband */
++#define SSB_SPROM4_TXPID5GH0 0x00FF
++#define SSB_SPROM4_TXPID5GH0_SHIFT 0
++#define SSB_SPROM4_TXPID5GH1 0xFF00
++#define SSB_SPROM4_TXPID5GH1_SHIFT 8
++#define SSB_SPROM4_TXPID5GH23 0x0070 /* TX Power Index 5GHz high subband */
++#define SSB_SPROM4_TXPID5GH2 0x00FF
++#define SSB_SPROM4_TXPID5GH2_SHIFT 0
++#define SSB_SPROM4_TXPID5GH3 0xFF00
++#define SSB_SPROM4_TXPID5GH3_SHIFT 8
++#define SSB_SPROM4_MAXP_BG 0x0080 /* Max Power BG in path 1 */
+ #define SSB_SPROM4_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */
+ #define SSB_SPROM4_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
+ #define SSB_SPROM4_ITSSI_BG_SHIFT 8
+-#define SSB_SPROM4_MAXP_A 0x108A /* Max Power A in path 1 */
++#define SSB_SPROM4_MAXP_A 0x008A /* Max Power A in path 1 */
+ #define SSB_SPROM4_MAXP_A_MASK 0x00FF /* Mask for Max Power A */
+ #define SSB_SPROM4_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */
+ #define SSB_SPROM4_ITSSI_A_SHIFT 8
+-#define SSB_SPROM4_GPIOA 0x1056 /* Gen. Purpose IO # 0 and 1 */
+-#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */
+-#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */
+-#define SSB_SPROM4_GPIOA_P1_SHIFT 8
+-#define SSB_SPROM4_GPIOB 0x1058 /* Gen. Purpose IO # 2 and 3 */
+-#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */
+-#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */
+-#define SSB_SPROM4_GPIOB_P3_SHIFT 8
+-#define SSB_SPROM4_PA0B0 0x1082 /* The paXbY locations are */
+-#define SSB_SPROM4_PA0B1 0x1084 /* only guesses */
+-#define SSB_SPROM4_PA0B2 0x1086
+-#define SSB_SPROM4_PA1B0 0x108E
+-#define SSB_SPROM4_PA1B1 0x1090
+-#define SSB_SPROM4_PA1B2 0x1092
++#define SSB_SPROM4_PA0B0 0x0082 /* The paXbY locations are */
++#define SSB_SPROM4_PA0B1 0x0084 /* only guesses */
++#define SSB_SPROM4_PA0B2 0x0086
++#define SSB_SPROM4_PA1B0 0x008E
++#define SSB_SPROM4_PA1B1 0x0090
++#define SSB_SPROM4_PA1B2 0x0092
projects / openwrt.git / blobdiff