[kernel/2.6.38] refresh patches
[openwrt.git] / target / linux / cns3xxx / patches / 052-cns3xxx_spi.patch
index 1432800..f002bd3 100644 (file)
@@ -1,6 +1,6 @@
 --- a/drivers/spi/Kconfig
 +++ b/drivers/spi/Kconfig
-@@ -114,6 +114,13 @@ config SPI_BUTTERFLY
+@@ -117,6 +117,13 @@ config SPI_BUTTERFLY
          inexpensive battery powered microcontroller evaluation board.
          This same cable can be used to flash new firmware.
  
        depends on (M520x || M523x || M5249 || M527x || M528x || M532x)
 --- a/drivers/spi/Makefile
 +++ b/drivers/spi/Makefile
-@@ -55,6 +55,7 @@ obj-$(CONFIG_SPI_SH_SCI)             += spi_sh_sci.
- obj-$(CONFIG_SPI_SH_MSIOF)            += spi_sh_msiof.o
- obj-$(CONFIG_SPI_STMP3XXX)            += spi_stmp.o
- obj-$(CONFIG_SPI_NUC900)              += spi_nuc900.o
+@@ -18,6 +18,7 @@ obj-$(CONFIG_SPI_BFIN)                       += spi-bfin5xx.
+ obj-$(CONFIG_SPI_BFIN_SPORT)          += spi-bfin-sport.o
+ obj-$(CONFIG_SPI_BITBANG)             += spi-bitbang.o
+ obj-$(CONFIG_SPI_BUTTERFLY)           += spi-butterfly.o
 +obj-$(CONFIG_SPI_CNS3XXX)             += spi_cns3xxx.o
- # special build for s3c24xx spi driver with fiq support
spi_s3c24xx_hw-y                      := spi_s3c24xx.o
+ obj-$(CONFIG_SPI_COLDFIRE_QSPI)               += spi-coldfire-qspi.o
+ obj-$(CONFIG_SPI_DAVINCI)             += spi-davinci.o
obj-$(CONFIG_SPI_DESIGNWARE)          += spi-dw.o
 --- /dev/null
 +++ b/drivers/spi/spi_cns3xxx.c
 @@ -0,0 +1,449 @@
  };
  
  /**
---- a/drivers/spi/spi_bitbang.c
-+++ b/drivers/spi/spi_bitbang.c
+--- a/drivers/spi/spi-bitbang.c
++++ b/drivers/spi/spi-bitbang.c
 @@ -329,6 +329,12 @@ static void bitbang_work(struct work_str
                                 */
                                if (!m->is_dma_mapped)
This page took 0.021438 seconds and 4 git commands to generate.