rtl8366_smi: move chip specific stuff into its own struct
[openwrt.git] / target / linux / ar71xx / image / Makefile
index 3f0cd01..f5bafdb 100644 (file)
@@ -10,39 +10,71 @@ include $(INCLUDE_DIR)/image.mk
 IMGNAME:=$(BIN_DIR)/openwrt-$(BOARD)
 
 define imgname
-$(IMGNAME)-$(2)-$(patsubst jffs2-%,jffs2,$(1))
+$(IMGNAME)-$(2)-$(patsubst jffs2-%,jffs2,$(patsubst squashfs-%,squashfs,$(1)))
 endef
 
 VMLINUX:=$(IMGNAME)-vmlinux
+UIMAGE:=$(IMGNAME)-uImage
+fs_squash:=squashfs-only
+fs_all:=all
+fs_4k:=4k
+fs_64k:=64k
+fs_128k:=128k
 ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
+       fs_squash:=initramfs
+       fs_all:=initramfs
+       fs_4k:=initramfs
+       fs_64k:=initramfs
+       fs_128k:=initramfs
        VMLINUX:=$(IMGNAME)-vmlinux-initramfs
+       UIMAGE:=$(IMGNAME)-uImage-initramfs
 endif
 
+define CompressLzma
+  $(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(2)
+endef
+
+define PatchKernelLzma
+       cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(1)
+       $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux-$(1) '$(strip $(2))'
+       $(call CompressLzma,$(KDIR)/vmlinux-$(1),$(KDIR)/vmlinux-$(1).bin.lzma)
+endef
+
+define PatchKernelGzip
+       cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(1)
+       $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux-$(1) '$(strip $(2))'
+       gzip -9 -c $(KDIR)/vmlinux-$(1) > $(KDIR)/vmlinux-$(1).bin.gz
+endef
+
+define MkImageLzma
+       mkimage -A mips -O linux -T kernel -a 0x80060000 -C lzma \
+               -e 0x80060000 -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+               -d $(1) $(2)
+endef
+
+define MkImageGzip
+       mkimage -A mips -O linux -T kernel -a 0x80060000 -C gzip \
+               -e 0x80060000 -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+               -d $(1) $(2)
+endef
+
 define Image/BuildKernel
        cp $(KDIR)/vmlinux.elf $(VMLINUX).elf
        cp $(KDIR)/vmlinux $(VMLINUX).bin
        gzip -9 -c $(KDIR)/vmlinux > $(KDIR)/vmlinux.bin.gz
-       $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.bin.l7
-       $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux -lc1 -lp2 -pb2 $(KDIR)/vmlinux.bin.lzma
-       dd if=$(KDIR)/vmlinux.bin.l7 of=$(VMLINUX).lzma bs=65536 conv=sync
+       $(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma)
+       dd if=$(KDIR)/vmlinux.bin.lzma of=$(VMLINUX).lzma bs=65536 conv=sync
        dd if=$(KDIR)/vmlinux.bin.gz of=$(VMLINUX).gz bs=65536 conv=sync
-       mkimage -A mips -O linux -T kernel -a 0x80060000 -C gzip -e \
-               0x80060000 \
-               -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-               -d $(KDIR)/vmlinux.bin.gz $(IMGNAME)-uImage-gzip.bin
-       mkimage -A mips -O linux -T kernel -a 0x80060000 -C lzma -e \
-               0x80060000 \
-               -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-               -d $(KDIR)/vmlinux.bin.lzma $(IMGNAME)-uImage-lzma.bin
+       $(call MkImageGzip,$(KDIR)/vmlinux.bin.gz,$(UIMAGE)-gzip.bin)
+       $(call MkImageLzma,$(KDIR)/vmlinux.bin.lzma,$(UIMAGE)-lzma.bin)
+       $(call Image/Build/Initramfs)
 endef
 
-define Image/Build/AP81
-       cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(2)
-       $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux-$(2) '$(strip $(3))'
-       $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux-$(2) $(KDIR)/vmlinux-$(2).bin.lzma
-       if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt 786432 ]; then \
+define Image/Build/WRT400N
+       $(call PatchKernelLzma,$(2),$(3))
+       if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt 1310720 ]; then \
                echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
-       else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 3080192 ]; then \
+       else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 6488064 ]; then \
                echo "Warning: $(KDIR)/root.$(1) is too big"; \
        else \
                mkimage -A mips -O linux -T kernel -a 0x80060000 -C lzma -e \
@@ -50,126 +82,488 @@ define Image/Build/AP81
                        -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
                        -d $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/vmlinux-$(2).uImage; \
                ( \
-                       dd if=$(KDIR)/vmlinux-$(2).uImage bs=768k conv=sync; \
-                       dd if=$(KDIR)/root.$(1) bs=3008k conv=sync; \
+                       dd if=$(KDIR)/vmlinux-$(2).uImage bs=1280k conv=sync; \
+                       dd if=$(KDIR)/root.$(1) bs=6336k conv=sync; \
+                       echo -n $(4); \
                ) > $(call imgname,$(1),$(2)).bin; \
-               cp $(call imgname,$(1),$(2)).bin $(call imgname,$(1),$(2)).webui; \
-               echo -n $(4) >> $(call imgname,$(1),$(2)).webui; \
+               wrt400n $(KDIR)/vmlinux-$(2).uImage $(KDIR)/root.$(1) $(call imgname,$(1),$(2)).webui; \
        fi; fi
 endef
 
+dir600a1_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,896k(kernel),2816k(rootfs),64k(mac)ro,64k(art)ro,3712k@0x40000(firmware)
+define Image/Build/DIR600A1
+       $(call PatchKernelLzma,$(2),$(3) $(dir600a1_mtdlayout))
+       if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt 917504 ]; then \
+               echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
+       else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 2818048 ]; then \
+               echo "Warning: $(KDIR)/root.$(1) is too big"; \
+       else \
+               mkimage -A mips -O linux -T kernel -a 0x80060000 -C lzma -e \
+                       0x80060000 \
+                       -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+                       -d $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/vmlinux-$(2).uImage; \
+               ( \
+                       dd if=$(KDIR)/vmlinux-$(2).uImage bs=896k conv=sync; \
+                       dd if=$(KDIR)/root.$(1) bs=2752k conv=sync; \
+                       echo -n "AP91-AR7240-RT-090223-00"; \
+               ) > $(call imgname,$(1),$(2))-universal.bin; \
+       fi; fi
+endef
+
+dir825b1_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,1024k(kernel),5184k(rootfs),64k(caldata)ro,1600k(unknown)ro,6208k@0x50000(firmware)
+define Image/Build/DIR825B1
+       $(call PatchKernelLzma,$(2),$(3) $(dir825b1_mtdlayout))
+       $(call MkImageLzma,$(KDIR)/vmlinux-$(2).bin.lzma,$(call imgname,$(1),$(2)).bin)
+       if [ `stat -c%s "$(call imgname,$(1),$(2)).bin"` -gt 1048576 ]; then \
+               echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
+               rm -f $(call imgname,$(1),$(2)).bin; \
+       else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 5308416 ]; then \
+               echo "Warning: $(KDIR)/root.$(1) is too big"; \
+               rm -f $(call imgname,$(1),$(2)).bin; \
+       else \
+               dd if=$(KDIR)/root.$(1) of=$(call imgname,$(1),$(2)).bin bs=1k seek=1024; \
+               cp $(call imgname,$(1),$(2)).bin $(call imgname,$(1),$(2))-backup-loader.bin; \
+               echo -n "01AP94-AR7161-RT-080619-00" >> $(call imgname,$(1),$(2))-backup-loader.bin; \
+       fi; fi
+endef
+
+define Image/Build/WZRHPG300NH
+       $(call PatchKernelLzma,$(2),$(3))
+       if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt 1048576 ]; then \
+               echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
+       else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 31850496 ]; then \
+               echo "Warning: $(KDIR)/root.$(1) is too big"; \
+       else \
+               mkimage -A mips -O linux -T kernel -a 0x80060000 -C lzma -e \
+                       0x80060000 \
+                       -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+                       -d $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/vmlinux-$(2).uImage; \
+               ( \
+                       dd if=$(KDIR)/vmlinux-$(2).uImage bs=1024k conv=sync; \
+                       dd if=$(KDIR)/root.$(1) bs=128k conv=sync; \
+               ) > $(call imgname,$(1),$(2))-sysupgrade.bin; \
+               ( \
+                       echo -n -e "# Airstation Public Fmt1\x00\x00\x00\x00\x00\x00\x00\x00"; \
+                       dd if=$(call imgname,$(1),$(2))-sysupgrade.bin; \
+               ) > $(call imgname,$(1),$(2))-tftp.bin; \
+       fi; fi
+endef
+
+cameo_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(config)ro,896k(kernel),2880k(rootfs),64k(art)ro,3776k@0x30000(firmware)
+define Image/Build/Cameo
+       $(call PatchKernelLzma,$(2),$(3) $(cameo_mtdlayout))
+       if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt 917504 ]; then \
+               echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
+       else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 2949120 ]; then \
+               echo "Warning: $(KDIR)/root.$(1) is too big"; \
+       else \
+               mkimage -A mips -O linux -T kernel -a 0x80060000 -C lzma -e \
+                       0x80060000 \
+                       -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+                       -d $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/vmlinux-$(2).uImage; \
+               ( \
+                       dd if=$(KDIR)/vmlinux-$(2).uImage bs=896k conv=sync; \
+                       dd if=$(KDIR)/root.$(1) bs=2880k conv=sync; \
+                       echo -n $(4); \
+               ) > $(call imgname,$(1),$(2)).uni; \
+       fi; fi
+endef
+
+define Image/Build/AP83
+       $(call PatchKernelGzip,$(2),$(3))
+       if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.gz"` -gt 1310720 ]; then \
+               echo "Warning: $(KDIR)/vmlinux-$(2).bin.gz is too big"; \
+       else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 6619136 ]; then \
+               echo "Warning: $(KDIR)/root.$(1) is too big"; \
+       else \
+               mkimage -A mips -O linux -T kernel -a 0x80060000 -C gzip -e \
+                       0x80060000 \
+                       -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+                       -d $(KDIR)/vmlinux-$(2).bin.gz \
+                       $(KDIR)/vmlinux-$(2).uImage; \
+               dd if=$(KDIR)/vmlinux-$(2).uImage \
+                       of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync; \
+               dd if=$(KDIR)/root.$(1) \
+                       of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \
+               ( \
+                       dd if=$(KDIR)/vmlinux-$(2).uImage bs=1280k conv=sync; \
+                       dd if=$(KDIR)/root.$(1); \
+               ) > $(call imgname,$(1),$(2))-sysupgrade.bin; \
+       fi; fi
+endef
+
+define Image/Build/PB4X
+       $(call PatchKernelLzma,$(2),$(3))
+       dd if=$(KDIR)/vmlinux-$(2).bin.lzma \
+          of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync
+       dd if=$(KDIR)/root.$(1) \
+          of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync
+       -sh $(TOPDIR)/scripts/combined-image.sh \
+               "$(call imgname,kernel,$(2)).bin" \
+               "$(call imgname,$(1),$(2)-rootfs).bin" \
+               $(call imgname,$(1),$(2))-sysupgrade.bin
+endef
+
 define Image/Build/MyLoader
        -$(STAGING_DIR_HOST)/bin/mkmylofw -B $(2) \
-               -p0x30000:0xc0000:ahl:0x80060000:kernel:$(KDIR)/vmlinux.bin.lzma  \
-               -p0xf0000:0:::rootfs:$(KDIR)/root.$(1) \
-               $(call imgname,$(1),$(2)).img
+               -p0x030000:0xd0000:al:0x80060000:kernel:$(KDIR)/vmlinux.bin.lzma \
+               -p0x100000:0:::rootfs:$(KDIR)/root.$(1) \
+               $(call imgname,$(1),$(2))-2M.img
+       -$(STAGING_DIR_HOST)/bin/mkmylofw -B $(2) -s 0x400000 \
+               -p0x030000:0xd0000:al:0x80060000:kernel:$(KDIR)/vmlinux.bin.lzma \
+               -p0x100000:0:::rootfs:$(KDIR)/root.$(1) \
+               $(call imgname,$(1),$(2))-4M.img
+       -$(STAGING_DIR_HOST)/bin/mkmylofw -B $(2) -s 0x800000 \
+               -p0x030000:0xd0000:al:0x80060000:kernel:$(KDIR)/vmlinux.bin.lzma \
+               -p0x100000:0:::rootfs:$(KDIR)/root.$(1) \
+               $(call imgname,$(1),$(2))-8M.img
+       -$(STAGING_DIR_HOST)/bin/mkmylofw -B $(2) -s 0x1000000 \
+               -p0x030000:0xd0000:al:0x80060000:kernel:$(KDIR)/vmlinux.bin.lzma \
+               -p0x100000:0:::rootfs:$(KDIR)/root.$(1) \
+               $(call imgname,$(1),$(2))-16M.img
+endef
+
+ubntxm_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1024k(kernel),6528k(rootfs),256k(cfg)ro,64k(EEPROM)ro,7552k@0x50000(firmware)
+define Image/Build/UBNTXM
+       $(call PatchKernelLzma,$(2),$(3) $(ubntxm_mtdlayout))
+       $(call MkImageLzma,$(KDIR)/vmlinux-$(2).bin.lzma,$(KDIR)/vmlinux-$(2).uImage.bin)
+       dd if=$(KDIR)/vmlinux-$(2).uImage.bin of=$(KDIR)/vmlinux-$(2).uImage bs=1024k conv=sync
+       -$(STAGING_DIR_HOST)/bin/mkfwimage \
+               -B $(4) -v $(5).$(6).OpenWrt.$(REVISION) \
+               -k $(KDIR)/vmlinux-$(2).uImage \
+               -r $(BIN_DIR)/openwrt-$(BOARD)-root.$(1) \
+               -o $(call imgname,$(1),$(2))-factory.bin
+       ( \
+               dd if=$(KDIR)/vmlinux-$(2).uImage; \
+               dd if=$(BIN_DIR)/openwrt-$(BOARD)-root.$(1); \
+       ) > $(call imgname,$(1),$(2))-sysupgrade.bin
 endef
 
 define Image/Build/UBNT
-       cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(2)
-       $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux-$(2) '$(strip $(3))'
-       $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux-$(2) $(KDIR)/vmlinux-$(2).lzma
-       dd if=$(KDIR)/vmlinux-$(2).lzma of=$(KDIR)/vmlinux-$(2).bin.lzma bs=64k conv=sync
+       $(call PatchKernelLzma,$(2),$(3))
+       dd if=$(KDIR)/vmlinux-$(2).bin.lzma of=$(KDIR)/vmlinux-$(2).lzma bs=64k conv=sync
        -$(STAGING_DIR_HOST)/bin/mkfwimage \
-               -B $(4) -v $(5).ar7100.OpenWrt \
-               -k $(KDIR)/vmlinux-$(2).bin.lzma \
+               -B $(4) -v $(5).$(6).OpenWrt.$(REVISION) \
+               -k $(KDIR)/vmlinux-$(2).lzma \
                -r $(BIN_DIR)/openwrt-$(BOARD)-root.$(1) \
-               -o $(BIN_DIR)/openwrt-$(BOARD)-ubnt-$(2)-$(1).bin
+               -o $(call imgname,$(1),$(2))-factory.bin
+       -sh $(TOPDIR)/scripts/combined-image.sh \
+               "$(KDIR)/vmlinux-$(2).lzma" \
+               "$(BIN_DIR)/openwrt-$(BOARD)-root.$(1)" \
+               $(call imgname,$(1),$(2))-sysupgrade.bin
 endef
 
 define Image/Build/Planex
-       cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(2)
-       $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux-$(2) '$(strip $(3))'
-       gzip -9 -c $(KDIR)/vmlinux-$(2) > $(KDIR)/vmlinux-$(2).bin.gzip
-       if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.gzip"` -gt 1441792 ]; then \
-               echo "Warning: $(KDIR)/vmlinux-$(2).bin.gzip is too big"; \
+       $(call PatchKernelGzip,$(2),$(3))
+       if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.gz"` -gt 1441792 ]; then \
+               echo "Warning: $(KDIR)/vmlinux-$(2).bin.gz is too big"; \
        else if [ `stat -c%s $(KDIR)/root.$(1)` -gt 6356992 ]; then \
                echo "Warning: $(KDIR)/root.$(1) is too big"; \
        else \
                mkimage -A mips -O linux -T kernel -a 0x80060000 -C gzip -e \
                        0x80060000 \
                        -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-                       -d $(KDIR)/vmlinux-$(2).bin.gzip $(KDIR)/vmlinux-$(2).uImage; \
+                       -d $(KDIR)/vmlinux-$(2).bin.gz $(KDIR)/vmlinux-$(2).uImage; \
                ( \
                        dd if=$(KDIR)/vmlinux-$(2).uImage bs=1408k conv=sync; \
                        dd if=$(KDIR)/root.$(1) bs=6208k conv=sync; \
                ) > $(call imgname,$(1),$(2)).bin; \
-               $(STAGING_DIR_HOST)/bin/mkplanexfw -v 2.00.00 \
+               $(STAGING_DIR_HOST)/bin/mkplanexfw \
+                       -B $(2) \
+                       -v 2.00.00 \
                        -i $(call imgname,$(1),$(2)).bin \
                        -o $(call imgname,$(1),$(2)).webui; \
        fi; fi
 endef
 
-define Image/Build/Template/Compex
-       $(call Image/Build/MyLoader,$(1),$(2))
+define Image/Build/TPLINK
+       $(call PatchKernelGzip,$(2),$(3))
+       -$(STAGING_DIR_HOST)/bin/mktplinkfw \
+               -B $(4) -N OpenWrt -V $(REVISION)\
+               -k $(KDIR)/vmlinux-$(2).bin.gz \
+               -r $(BIN_DIR)/openwrt-$(BOARD)-root.$(1) \
+               -o $(call imgname,$(1),$(2))-universal.bin
+endef
+
+define Image/Build/TPLINK/initramfs
+       $(call PatchKernelGzip,$(2),$(3))
+       -$(STAGING_DIR_HOST)/bin/mktplinkfw -c \
+               -B $(4) -N OpenWrt -V $(REVISION)\
+               -k $(KDIR)/vmlinux-$(2).bin.gz \
+               -o $(call imgname,$(1),$(2))-uImage.bin
+endef
+
+define Image/Build/CyberTAN
+       $(call PatchKernelGzip,$(2),$(3))
+       $(call MkImageGzip,$(KDIR)/vmlinux-$(2).bin.gz,$(KDIR)/vmlinux-$(2).uImage)
+       ( \
+               dd if=$(KDIR)/vmlinux-$(2).uImage bs=64k conv=sync; \
+               dd if=/dev/zero bs=1 count=65476; \
+               dd if=$(KDIR)/root.$(1) bs=64k; \
+       ) > $(KDIR)/vmlinux-$(2).image
+       $(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/vmlinux-$(2).trx \
+               -f $(KDIR)/vmlinux-$(2).image
+       -$(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(4) -g \
+               -i $(KDIR)/vmlinux-$(2).trx \
+               -o $(call imgname,$(1),$(2)).bin
+endef
+
+wndr3700_mtdlayout=mtdparts=spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,1024k(kernel),6656k(rootfs),64k(art)ro,7680k@0x70000(firmware)
+define Image/Build/WNDR3700
+       $(call PatchKernelLzma,$(2),$(3) $(wndr3700_mtdlayout))
+       $(call MkImageLzma,$(KDIR)/vmlinux-$(2).bin.lzma,$(KDIR)/vmlinux-$(2).uImage)
+       mkdir -p $(KDIR)/wndr3700/image
+       $(STAGING_DIR_HOST)/bin/wndr3700 \
+               $(KDIR)/vmlinux-$(2).uImage \
+               $(KDIR)/wndr3700/image/uImage
+       $(STAGING_DIR_HOST)/bin/mksquashfs-lzma \
+               $(KDIR)/wndr3700 $(KDIR)/vmlinux-$(2).uImage.squashfs.tmp \
+               -nopad -noappend -root-owned -be
+       -rm -rf $(KDIR)/wndr3700
+       mkimage -A mips -O linux -T filesystem -C none \
+               -a 0xbf070000 -e 0xbf070000 \
+               -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+               -d $(KDIR)/vmlinux-$(2).uImage.squashfs.tmp \
+               $(KDIR)/vmlinux-$(2).uImage.squashfs.tmp2
+       $(STAGING_DIR_HOST)/bin/wndr3700 \
+               $(KDIR)/vmlinux-$(2).uImage.squashfs.tmp2 \
+               $(KDIR)/vmlinux-$(2).uImage.squashfs
+       -rm -f $(KDIR)/vmlinux-$(2).uImage.squashfs.tmp*
+       ( \
+               dd if=$(KDIR)/vmlinux-$(2).uImage.squashfs bs=1024k conv=sync; \
+               dd if=$(KDIR)/root.$(1) bs=64k; \
+       ) > $(call imgname,$(1),$(2))-sysupgrade.bin
+       $(STAGING_DIR_HOST)/bin/mkdniimg \
+               -B WNDR3700 -v OpenWrt.$(REVISION) \
+               -i $(call imgname,$(1),$(2))-sysupgrade.bin \
+               -o $(call imgname,$(1),$(2))-factory.img
+endef
+
+define Image/Build/WNDR3700/initramfs
+       $(call PatchKernelLzma,$(2),$(3) $(wndr3700_mtdlayout))
+       $(call MkImageLzma,$(KDIR)/vmlinux-$(2).bin.lzma,$(KDIR)/vmlinux-$(2).uImage)
+       $(STAGING_DIR_HOST)/bin/wndr3700 \
+               $(KDIR)/vmlinux-$(2).uImage \
+               $(call imgname,$(1),$(2))-uImage.bin
+endef
+
+define Image/Build/Template/initramfs/initramfs
+       $(call Image/Build/$(1)/initramfs,initramfs,$(2),$(3),$(4),$(5),$(6),$(7))
+endef
+
+define Image/Build/Template/all/squashfs
+       $(call Image/Build/$(1),squashfs,$(2),$(3),$(4),$(5),$(6),$(7))
 endef
 
-define Image/Build/Template/Compex/squashfs
-       $(call Image/Build/Template/Compex,squashfs,$(1))
+define Image/Build/Template/all/jffs2-64k
+       $(call Image/Build/$(1),jffs2-64k,$(2),$(3),$(4),$(5),$(6),$(7))
 endef
 
-define Image/Build/Template/AP81
-       $(call Image/Build/AP81,$(1),$(2),$(3),$(4))
+define Image/Build/Template/all/jffs2-128k
+       $(call Image/Build/$(1),jffs2-128k,$(2),$(3),$(4),$(5),$(6),$(7))
 endef
 
-define Image/Build/Template/AP81/squashfs
-       $(call Image/Build/Template/AP81,squashfs,$(1),$(2),$(3))
+define Image/Build/Template/squashfs-only/squashfs
+       $(call Image/Build/$(1),squashfs,$(2),$(3),$(4),$(5),$(6),$(7))
 endef
 
-define Image/Build/Template/UBNT
-       $(call Image/Build/UBNT,$(1),$(2),$(3),$(4),$(5))
+define Image/Build/Template/4k/squashfs
+       $(call Image/Build/$(1),squashfs-4k,$(2),$(3),$(4),$(5),$(6),$(7))
 endef
 
-define Image/Build/Template/UBNT/squashfs
-       $(call Image/Build/Template/UBNT,squashfs,$(1),$(2),$(3),$(4))
+define Image/Build/Template/64k/squashfs
+       $(call Image/Build/$(1),squashfs,$(2),$(3),$(4),$(5),$(6),$(7))
 endef
 
-define Image/Build/Template/Planex
-       $(call Image/Build/Planex,$(1),$(2),$(3))
+define Image/Build/Template/64k/jffs2-64k
+       $(call Image/Build/$(1),jffs2-64k,$(2),$(3),$(4),$(5),$(6),$(7))
 endef
 
-define Image/Build/Template/Planex/squashfs
-       $(call Image/Build/Template/Planex,squashfs,$(1),$(2))
+define Image/Build/Template/128k/squashfs
+       $(call Image/Build/$(1),squashfs,$(2),$(3),$(4),$(5),$(6),$(7))
+endef
+
+define Image/Build/Template/128k/jffs2-128k
+       $(call Image/Build/$(1),jffs2-128k,$(2),$(3),$(4),$(5),$(6),$(7))
+endef
+
+define Image/Build/Profile/AP81
+       $(call Image/Build/Template/$(fs_64k)/$(1),AP83,ap81,board=AP81)
+endef
+
+define Image/Build/Profile/AP83
+       $(call Image/Build/Template/$(fs_64k)/$(1),AP83,ap83,board=AP83)
+endef
+
+define Image/Build/Profile/PB42
+       $(call Image/Build/Template/$(fs_64k)/$(1),PB4X,pb42,board=PB42)
+endef
+
+define Image/Build/Profile/PB44
+       $(call Image/Build/Template/$(fs_64k)/$(1),PB4X,pb44,board=PB44)
 endef
 
 define Image/Build/Profile/WP543
-       $(call Image/Build/Template/Compex/$(1),wp543)
+       $(call Image/Build/Template/$(fs_64k)/$(1),MyLoader,wp543)
+endef
+
+define Image/Build/Profile/DIR600A1
+       $(call Image/Build/Template/$(fs_64k)/$(1),DIR600A1,dir-600-a1,board=DIR-600-A1)
 endef
 
 define Image/Build/Profile/DIR615C1
-       $(call Image/Build/Template/AP81/$(1),dir-615c1,board=TEW-632BRP,"AP81-AR9130-RT-070614-02")
+       $(call Image/Build/Template/$(fs_squash)/$(1),Cameo,dir-615-c1,board=DIR-615-C1,"AP81-AR9130-RT-070614-02")
 endef
 
 define Image/Build/Profile/TEW632BRP
-       $(call Image/Build/Template/AP81/$(1),tew-632brp,board=TEW-632BRP,"AP81-AR9130-RT-070614-00")
+       $(call Image/Build/Template/$(fs_squash)/$(1),Cameo,tew-632brp,board=TEW-632BRP,"AP81-AR9130-RT-070614-00")
 endef
 
 define Image/Build/Profile/TEW652BRP
-       $(call Image/Build/Template/AP81/$(1),tew-652brp,board=TEW-632BRP,"AP81-AR9130-RT-080609-05")
+       $(call Image/Build/Template/$(fs_squash)/$(1),Cameo,tew-652brp,board=TEW-632BRP,"AP81-AR9130-RT-080609-05")
+endef
+
+define Image/Build/Profile/A02RBW300N
+       $(call Image/Build/Template/$(fs_squash)/$(1),Cameo,a02-rb-w300n,board=TEW-632BRP,"AP81-AR9130-RT-070614-03")
 endef
 
 define Image/Build/Profile/UBNTRS
-       $(call Image/Build/Template/UBNT/$(1),rs,board=UBNT-RS,RS,RSx)
+       $(call Image/Build/Template/$(fs_64k)/$(1),UBNT,ubnt-rs,board=UBNT-RS,RS,RSx,ar7100)
+endef
+
+define Image/Build/Profile/UBNTRSPRO
+       $(call Image/Build/Template/$(fs_64k)/$(1),UBNT,ubnt-rspro,board=UBNT-RSPRO,RSPRO,RSPRO,ar7100pro)
+endef
+
+define Image/Build/Profile/UBNTLSSR71
+       $(call Image/Build/Template/$(fs_64k)/$(1),UBNT,ubnt-ls-sr71,board=UBNT-LS-SR71,LS-SR71,LS-SR71,ar7100)
+endef
+
+define Image/Build/Profile/UBNTBULLETM
+       $(call Image/Build/Template/$(fs_64k)/$(1),UBNTXM,ubnt-bullet-m,board=UBNT-BM,XM,UBNTXM,ar7240)
+endef
+
+define Image/Build/Profile/UBNTROCKETM
+       $(call Image/Build/Template/$(fs_64k)/$(1),UBNTXM,ubnt-rocket-m,board=UBNT-RM,XM,UBNTXM,ar7240)
+endef
+
+define Image/Build/Profile/UBNTNANOM
+       $(call Image/Build/Template/$(fs_64k)/$(1),UBNTXM,ubnt-nano-m,board=UBNT-NM,XM,UBNTXM,ar7240)
+endef
+
+define Image/Build/Profile/UBNT
+       $(call Image/Build/Profile/UBNTRS,$(1))
+       $(call Image/Build/Profile/UBNTRSPRO,$(1))
+       $(call Image/Build/Profile/UBNTLSSR71,$(1))
+       $(call Image/Build/Profile/UBNTBULLETM,$(1))
+       $(call Image/Build/Profile/UBNTROCKETM,$(1))
+       $(call Image/Build/Profile/UBNTNANOM,$(1))
 endef
 
 define Image/Build/Profile/MZKW04NU
-       $(call Image/Build/Template/Planex/$(1),mzk-w04nu,board=MZK-W04NU)
+       $(call Image/Build/Template/$(fs_64k)/$(1),Planex,mzk-w04nu,board=MZK-W04NU)
 endef
 
-define Image/Build/squashfs
-       $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
+define Image/Build/Profile/MZKW300NH
+       $(call Image/Build/Template/$(fs_64k)/$(1),Planex,mzk-w300nh,board=MZK-W300NH)
 endef
 
-define Image/Build
-       $(call Image/Build/$(1))
-       dd if=$(KDIR)/root.$(1) of=$(IMGNAME)-root.$(1) bs=128k conv=sync
+define Image/Build/Profile/TLWR741NDV1
+       $(call Image/Build/Template/$(fs_4k)/$(1),TPLINK,tl-wr741nd-v1,board=TL-WR741ND,TL-WR741NDv1)
+endef
+
+define Image/Build/Profile/TLWR841NV15
+       $(call Image/Build/Template/$(fs_squash)/$(1),TPLINK,tl-wr841n-v1.5,board=TL-WR841N-v1.5,TL-WR841Nv1.5)
+endef
+
+define Image/Build/Profile/TLWR841NDV3
+       $(call Image/Build/Template/$(fs_squash)/$(1),TPLINK,tl-wr841nd-v3,board=TL-WR941ND,TL-WR841NDv3)
+endef
+
+define Image/Build/Profile/TLWR841NDV5
+       $(call Image/Build/Template/$(fs_4k)/$(1),TPLINK,tl-wr841nd-v5,board=TL-WR741ND,TL-WR841NDv5)
+endef
+
+define Image/Build/Profile/TLWR941NDV2
+       $(call Image/Build/Template/$(fs_squash)/$(1),TPLINK,tl-wr941nd-v2,board=TL-WR941ND,TL-WR941NDv2)
+endef
+
+define Image/Build/Profile/TLWR1043NDV1
+       $(call Image/Build/Template/$(fs_squash)/$(1),TPLINK,tl-wr1043nd-v1,board=TL-WR1043ND,TL-WR1043NDv1)
+endef
+
+define Image/Build/Profile/WNDR3700
+       $(call Image/Build/Template/$(fs_64k)/$(1),WNDR3700,wndr3700,board=WNDR3700)
+endef
+
+define Image/Build/Profile/WRT400N
+       $(call Image/Build/Template/$(fs_64k)/$(1),WRT400N,wrt400n,board=WRT400N)
+endef
+
+define Image/Build/Profile/DIR825B1
+       $(call Image/Build/Template/$(fs_64k)/$(1),DIR825B1,dir-825-b1,board=DIR-825-B1)
+endef
+
+define Image/Build/Profile/WRT160NL
+       $(call Image/Build/Template/$(fs_64k)/$(1),CyberTAN,wrt160nl,board=WRT160NL,1.00.01)
+endef
+
+define Image/Build/Profile/WZRHPG300NH
+       $(call Image/Build/Template/$(fs_128k)/$(1),WZRHPG300NH,wzr-hp-g300nh,board=WZR-HP-G300NH)
+endef
 
+define Image/Build/Profile/Default
+       $(call Image/Build/Profile/AP81,$(1))
+       $(call Image/Build/Profile/AP83,$(1))
+       $(call Image/Build/Profile/A02RBW300N,$(1))
+       $(call Image/Build/Profile/DIR600A1,$(1))
        $(call Image/Build/Profile/DIR615C1,$(1))
+       $(call Image/Build/Profile/DIR825B1,$(1))
        $(call Image/Build/Profile/MZKW04NU,$(1))
+       $(call Image/Build/Profile/MZKW300NH,$(1))
+       $(call Image/Build/Profile/PB42,$(1))
+       $(call Image/Build/Profile/PB44,$(1))
        $(call Image/Build/Profile/TEW632BRP,$(1))
        $(call Image/Build/Profile/TEW652BRP,$(1))
+       $(call Image/Build/Profile/TLWR741NDV1,$(1))
+       $(call Image/Build/Profile/TLWR841NV15,$(1))
+       $(call Image/Build/Profile/TLWR841NDV3,$(1))
+       $(call Image/Build/Profile/TLWR841NDV5,$(1))
+       $(call Image/Build/Profile/TLWR941NDV2,$(1))
+       $(call Image/Build/Profile/TLWR1043NDV1,$(1))
+       $(call Image/Build/Profile/UBNT,$(1))
+       $(call Image/Build/Profile/WP543,$(1))
+       $(call Image/Build/Profile/WNDR3700,$(1))
+       $(call Image/Build/Profile/WRT400N,$(1))
+       $(call Image/Build/Profile/WRT160NL,$(1))
+       $(call Image/Build/Profile/WZRHPG300NH,$(1))
+endef
+
+define Image/Build/Profile/Madwifi
        $(call Image/Build/Profile/UBNTRS,$(1))
+       $(call Image/Build/Profile/UBNTRSPRO,$(1))
+       $(call Image/Build/Profile/UBNTLSSR71,$(1))
        $(call Image/Build/Profile/WP543,$(1))
 endef
 
+define Image/Build/squashfs
+       $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
+       dd if=$(KDIR)/root.squashfs of=$(KDIR)/root.squashfs-4k.tmp0 bs=4k conv=sync
+       $(call add_jffs2_mark,$(KDIR)/root.squashfs-4k.tmp0)
+       dd if=$(KDIR)/root.squashfs-4k.tmp0 of=$(IMGNAME)-root.squashfs-4k bs=4k conv=sync
+       $(call add_jffs2_mark,$(IMGNAME)-root.squashfs-4k)
+       rm -f $(KDIR)/root.squashfs-4k.tmp0
+endef
+
+define Image/Build/Initramfs
+       $(call Image/Build/Profile/$(PROFILE),initramfs)
+endef
+
+define Image/Build
+       $(call Image/Build/$(1))
+       dd if=$(KDIR)/root.$(1) of=$(IMGNAME)-root.$(1) bs=128k conv=sync
+
+       $(call Image/Build/Profile/$(PROFILE),$(1))
+endef
+
 $(eval $(call BuildImage))
This page took 0.040912 seconds and 4 git commands to generate.