ar71xx: add preliminary support for 3.3
[openwrt.git] / target / linux / ar71xx / patches-3.3 / 603-MIPS-ath79-ap121-fixes.patch
diff --git a/target/linux/ar71xx/patches-3.3/603-MIPS-ath79-ap121-fixes.patch b/target/linux/ar71xx/patches-3.3/603-MIPS-ath79-ap121-fixes.patch
new file mode 100644 (file)
index 0000000..b8583d5
--- /dev/null
@@ -0,0 +1,240 @@
+--- a/arch/mips/ath79/mach-ap121.c
++++ b/arch/mips/ath79/mach-ap121.c
+@@ -1,19 +1,23 @@
+ /*
+  *  Atheros AP121 board support
+  *
+- *  Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+  *
+  *  This program is free software; you can redistribute it and/or modify it
+  *  under the terms of the GNU General Public License version 2 as published
+  *  by the Free Software Foundation.
+  */
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
+-#include "machtypes.h"
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
+ #include "dev-spi.h"
+ #include "dev-usb.h"
+ #include "dev-wmac.h"
++#include "machtypes.h"
+ #define AP121_GPIO_LED_WLAN           0
+ #define AP121_GPIO_LED_USB            1
+@@ -24,7 +28,82 @@
+ #define AP121_KEYS_POLL_INTERVAL      20      /* msecs */
+ #define AP121_KEYS_DEBOUNCE_INTERVAL  (3 * AP121_KEYS_POLL_INTERVAL)
+-#define AP121_CAL_DATA_ADDR   0x1fff1000
++#define AP121_MAC0_OFFSET             0x0000
++#define AP121_MAC1_OFFSET             0x0006
++#define AP121_CALDATA_OFFSET          0x1000
++#define AP121_WMAC_MAC_OFFSET         0x1002
++
++#define AP121_MINI_GPIO_LED_WLAN      0
++#define AP121_MINI_GPIO_BTN_JUMPSTART 12
++#define AP121_MINI_GPIO_BTN_RESET     11
++
++static struct mtd_partition ap121_parts[] = {
++      {
++              .name           = "u-boot",
++              .offset         = 0,
++              .size           = 0x010000,
++              .mask_flags     = MTD_WRITEABLE,
++      },
++      {
++              .name           = "rootfs",
++              .offset         = 0x010000,
++              .size           = 0x130000,
++      },
++      {
++              .name           = "uImage",
++              .offset         = 0x140000,
++              .size           = 0x0a0000,
++      },
++      {
++              .name           = "NVRAM",
++              .offset         = 0x1e0000,
++              .size           = 0x010000,
++      },
++      {
++              .name           = "ART",
++              .offset         = 0x1f0000,
++              .size           = 0x010000,
++              .mask_flags     = MTD_WRITEABLE,
++      },
++};
++
++static struct mtd_partition ap121_mini_parts[] = {
++      {
++              .name           = "u-boot",
++              .offset         = 0,
++              .size           = 0x040000,
++              .mask_flags     = MTD_WRITEABLE,
++      },
++      {
++              .name           = "u-boot-env",
++              .offset         = 0x040000,
++              .size           = 0x010000,
++              .mask_flags     = MTD_WRITEABLE,
++      },
++      {
++              .name           = "rootfs",
++              .offset         = 0x050000,
++              .size           = 0x2b0000,
++      },
++      {
++              .name           = "uImage",
++              .offset         = 0x300000,
++              .size           = 0x0e0000,
++      },
++      {
++              .name           = "NVRAM",
++              .offset         = 0x3e0000,
++              .size           = 0x010000,
++      },
++      {
++              .name           = "ART",
++              .offset         = 0x3f0000,
++              .size           = 0x010000,
++              .mask_flags     = MTD_WRITEABLE,
++      },
++};
++
++static struct flash_platform_data ap121_flash_data;
+ static struct gpio_led ap121_leds_gpio[] __initdata = {
+       {
+@@ -58,41 +137,84 @@ static struct gpio_keys_button ap121_gpi
+       }
+ };
+-static struct ath79_spi_controller_data ap121_spi0_data = {
+-      .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+-      .cs_line = 0,
++static struct gpio_led ap121_mini_leds_gpio[] __initdata = {
++      {
++              .name           = "ap121:green:wlan",
++              .gpio           = AP121_MINI_GPIO_LED_WLAN,
++              .active_low     = 0,
++      },
+ };
+-static struct spi_board_info ap121_spi_info[] = {
+-      {
+-              .bus_num        = 0,
+-              .chip_select    = 0,
+-              .max_speed_hz   = 25000000,
+-              .modalias       = "mx25l1606e",
+-              .controller_data = &ap121_spi0_data,
++static struct gpio_keys_button ap121_mini_gpio_keys[] __initdata = {
++      {
++              .desc           = "jumpstart button",
++              .type           = EV_KEY,
++              .code           = KEY_WPS_BUTTON,
++              .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
++              .gpio           = AP121_MINI_GPIO_BTN_JUMPSTART,
++              .active_low     = 1,
++      },
++      {
++              .desc           = "reset button",
++              .type           = EV_KEY,
++              .code           = KEY_RESTART,
++              .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
++              .gpio           = AP121_MINI_GPIO_BTN_RESET,
++              .active_low     = 1,
+       }
+ };
+-static struct ath79_spi_platform_data ap121_spi_data = {
+-      .bus_num        = 0,
+-      .num_chipselect = 1,
+-};
++static void __init ap121_common_setup(void)
++{
++      u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++      ath79_register_m25p80(&ap121_flash_data);
++      ath79_register_wmac(art + AP121_CALDATA_OFFSET,
++                          art + AP121_WMAC_MAC_OFFSET);
++
++      ath79_init_mac(ath79_eth0_data.mac_addr, art + AP121_MAC0_OFFSET, 0);
++      ath79_init_mac(ath79_eth1_data.mac_addr, art + AP121_MAC1_OFFSET, 0);
++
++      ath79_register_mdio(0, 0x0);
++
++      /* LAN ports */
++      ath79_register_eth(1);
++
++      /* WAN port */
++      ath79_register_eth(0);
++}
+ static void __init ap121_setup(void)
+ {
+-      u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR);
++      ap121_flash_data.parts = ap121_parts;
++      ap121_flash_data.nr_parts = ARRAY_SIZE(ap121_parts);
++
++      ap121_common_setup();
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio),
+                                ap121_leds_gpio);
+       ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
+                                       ARRAY_SIZE(ap121_gpio_keys),
+                                       ap121_gpio_keys);
+-
+-      ath79_register_spi(&ap121_spi_data, ap121_spi_info,
+-                         ARRAY_SIZE(ap121_spi_info));
+       ath79_register_usb();
+-      ath79_register_wmac(cal_data, NULL);
+ }
+ MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
+            ap121_setup);
++
++static void __init ap121_mini_setup(void)
++{
++      ap121_flash_data.parts = ap121_mini_parts;
++      ap121_flash_data.nr_parts = ARRAY_SIZE(ap121_mini_parts);
++
++      ap121_common_setup();
++
++      ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_mini_leds_gpio),
++                               ap121_mini_leds_gpio);
++      ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
++                                      ARRAY_SIZE(ap121_mini_gpio_keys),
++                                      ap121_mini_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_AP121_MINI, "AP121-MINI", "Atheros AP121-MINI",
++           ap121_mini_setup);
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -5,9 +5,10 @@ menu "Atheros AR71XX/AR724X/AR913X machi
+ config ATH79_MACH_AP121
+       bool "Atheros AP121 reference board"
+       select SOC_AR933X
++      select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+-      select ATH79_DEV_SPI
++      select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+       help
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -17,6 +17,7 @@
+ enum ath79_mach_type {
+       ATH79_MACH_GENERIC = 0,
+       ATH79_MACH_AP121,               /* Atheros AP121 reference board */
++      ATH79_MACH_AP121_MINI,          /* Atheros AP121-MINI reference board */
+       ATH79_MACH_AP81,                /* Atheros AP81 reference board */
+       ATH79_MACH_DB120,               /* Atheros DB120 reference board */
+       ATH79_MACH_PB44,                /* Atheros PB44 reference board */
This page took 0.023179 seconds and 4 git commands to generate.