#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
#include <asm/mach-ralink/machine.h>
#include <asm/mach-ralink/dev-gpio-buttons.h>
#define DIR_300B_KEYS_POLL_INTERVAL 20
#define DIR_300B_KEYS_DEBOUNCE_INTERVAL (3 * DIR_300B_KEYS_POLL_INTERVAL)
-static struct mtd_partition dir_300b_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x030000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "devdata",
- .offset = 0x030000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "devconf",
- .offset = 0x040000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "kernel",
- .offset = 0x050000,
- .size = 0x0d0000,
- }, {
- .name = "rootfs",
- .offset = 0x120000,
- .size = 0x2e0000,
- }, {
- .name = "firmware",
- .offset = 0x050000,
- .size = 0x3b0000,
- }
-};
-
-static struct physmap_flash_data dir_300b_flash_data = {
- .nr_parts = ARRAY_SIZE(dir_300b_partitions),
- .parts = dir_300b_partitions,
-};
-
static struct gpio_led dir_300b_leds_gpio[] __initdata = {
{
.name = "d-link:amber:status",
{
rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
- rt305x_register_flash(0, &dir_300b_flash_data);
+ rt305x_register_flash(0);
+
rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
rt305x_register_ethernet();
ramips_register_gpio_leds(-1, ARRAY_SIZE(dir_300b_leds_gpio),
MIPS_MACHINE(RAMIPS_MACH_DIR_600_B2, "DIR-600-B2", "D-Link DIR-600 B2",
dir_300b_init);
+
+MIPS_MACHINE(RAMIPS_MACH_DIR_615_D, "DIR-615-D", "D-Link DIR-615 D",
+ dir_300b_init);