--- a/ath/if_ath.c
+++ b/ath/if_ath.c
-@@ -1014,9 +1014,7 @@
+@@ -1014,9 +1014,7 @@ ath_attach(u_int16_t devid, struct net_d
*/
sc->sc_hasveol = ath_hal_hasveol(ah);
sc->sc_hasintmit = ath_hal_hasintmit(ah);
/* get mac address from hardware */
-@@ -1144,6 +1142,11 @@
+@@ -1144,6 +1142,11 @@ ath_attach(u_int16_t devid, struct net_d
sc->sc_rp_lasttsf = 0;
sc->sc_last_tsf = 0;
return 0;
bad3:
ieee80211_ifdetach(ic);
-@@ -2428,6 +2431,43 @@
+@@ -2428,6 +2431,43 @@ ath_chan2flags(struct ieee80211_channel
return flags;
}
/*
* Context: process context
*/
-@@ -2493,8 +2533,7 @@
+@@ -2493,8 +2533,7 @@ ath_init(struct net_device *dev)
if (sc->sc_softled)
ath_hal_gpioCfgOutput(ah, sc->sc_ledpin);
/*
* This is needed only to setup initial state
-@@ -2530,7 +2569,7 @@
+@@ -2530,7 +2569,7 @@ ath_init(struct net_device *dev)
* Enable MIB interrupts when there are hardware phy counters.
* Note we only do this (at the moment) for station mode.
*/
sc->sc_imask |= HAL_INT_MIB;
ath_hal_intrset(ah, sc->sc_imask);
-@@ -2787,9 +2826,7 @@
+@@ -2787,9 +2826,7 @@ ath_reset(struct net_device *dev)
EPRINTF(sc, "Unable to reset hardware: '%s' (HAL status %u)\n",
ath_get_hal_status_desc(status), status);
ath_update_txpow(sc); /* update tx power state */
ath_radar_update(sc);
ath_setdefantenna(sc, sc->sc_defant);
-@@ -4174,6 +4211,8 @@
+@@ -4174,6 +4211,8 @@ ath_calcrxfilter(struct ath_softc *sc)
if (sc->sc_nmonvaps > 0)
rfilt |= (HAL_RX_FILTER_CONTROL | HAL_RX_FILTER_BEACON |
HAL_RX_FILTER_PROBEREQ | HAL_RX_FILTER_PROM);
if (sc->sc_curchan.privFlags & CHANNEL_DFS)
rfilt |= (HAL_RX_FILTER_PHYERR | HAL_RX_FILTER_PHYRADAR);
return rfilt;
-@@ -6524,9 +6563,6 @@
+@@ -6526,9 +6565,6 @@ process_rx_again:
rs->rs_rssi = 0;
len = rs->rs_datalen;
if (rs->rs_more) {
/*
-@@ -8874,9 +8910,7 @@
+@@ -8876,9 +8912,7 @@ ath_chan_set(struct ath_softc *sc, struc
if (sc->sc_softled)
ath_hal_gpioCfgOutput(ah, sc->sc_ledpin);
sc->sc_curchan = hchan;
ath_update_txpow(sc); /* update tx power state */
ath_radar_update(sc);
-@@ -10653,9 +10687,54 @@
+@@ -10655,9 +10689,54 @@ enum {
ATH_RP_IGNORED = 24,
ATH_RADAR_IGNORED = 25,
ATH_MAXVAPS = 26,
ATH_SYSCTL_DECL(ath_sysctl_halparam, ctl, write, filp, buffer, lenp, ppos)
{
struct ath_softc *sc = ctl->extra1;
-@@ -10841,6 +10920,11 @@
+@@ -10843,6 +10922,11 @@ ATH_SYSCTL_DECL(ath_sysctl_halparam, ctl
case ATH_RADAR_IGNORED:
sc->sc_radar_ignored = val;
break;
default:
ret = -EINVAL;
break;
-@@ -10907,6 +10991,11 @@
+@@ -10909,6 +10993,11 @@ ATH_SYSCTL_DECL(ath_sysctl_halparam, ctl
case ATH_RADAR_IGNORED:
val = sc->sc_radar_ignored;
break;
default:
ret = -EINVAL;
break;
-@@ -11084,6 +11173,24 @@
+@@ -11086,6 +11175,24 @@ static const ctl_table ath_sysctl_templa
.proc_handler = ath_sysctl_halparam,
.extra2 = (void *)ATH_RADAR_IGNORED,
},
--- a/ath/if_athvar.h
+++ b/ath/if_athvar.h
-@@ -693,6 +693,10 @@
+@@ -693,6 +693,10 @@ struct ath_softc {
unsigned int sc_txcont_power; /* Continuous transmit power in 0.5dBm units */
unsigned int sc_txcont_rate; /* Continuous transmit rate in Mbps */
const HAL_RATE_TABLE *sc_currates; /* current rate table */
--- a/ath/if_ath_hal.h
+++ b/ath/if_ath_hal.h
-@@ -67,14 +67,14 @@
+@@ -67,14 +67,14 @@ static inline HAL_POWER_MODE ath_hal_get
static inline HAL_BOOL ath_hal_getdiagstate(struct ath_hal *ah, int request,
const void *args, u_int32_t argsize,